advertisement
Unicont SPb Ltd
Marine LCD Display
MV-1501/1701/1901/2101
Operating Manual
(01-1-28112011)
St. Petersburg
2011
Unicont SPb Ltd Operating manual MV-1501/1701/1901/2101
Table of Contents
1.
GENERAL INFORMATION ..........................................................................................4
2.
DELIVERY SET ...............................................................................................................4
3.
SPECIFICATIONS ..........................................................................................................4
4.
MOUNTING AND CONNECTION ...............................................................................5
5.
CONTROLS ......................................................................................................................9
6.
TRANSPORTATION AND STORAGE ......................................................................10
7.
WARRANTY ..................................................................................................................11
8.
DATE OF PACKING .....................................................................................................12
9.
ACCEPTANCE DETAILS ............................................................................................12
10.
DATE OF COMMISSIONING .....................................................................................12
Unicont SPb Ltd Operating manual MV-1501/1701/1901/2101
This operating manual (OM) is designed for marine LCD display MV-1501/1701/1901/2101.
The OM is designed for study of design, operation principles and operation rules of the device for its intended use and maintenance. The OM may also be a source of information about the device to compile relevant sections of the equipment operational documentation in which the device can be used as an integral part.
Important! The company-manufacturer does not assume any responsibility that comes with loss or damage resulting from use of this product or related documentation.
All information in this manual is distributed by the company for information purposes only.
They are subject to change without notice of consumers; they may contain errors or inaccuracies.
Information specified may not include an obligation on the part of the company Unicont Spb Ltd.
Unicont SPb Ltd Operating manual MV-1501/1701/1901/2101
1. GENERAL INFORMATION
Marine LCD MV-1501/1701/1901/2101 series MasterView is a multipurpose display used to output visual data received from the navigation system and other automated systems.
2. DELIVERY SET
1. Marine LCD MV-xx01
2. Plate/desktop mounting brackets
Manual
4. VGA
1 piece
1 piece
As an option you may choose to add the following items to the scope of supply:
Touch-sensitive screen (touch screen), model of execution is marked with MV-xx01 TS
CD with drivers.
3. SPECIFICATIONS
Table 1. Versions
Parameter
Power supply voltage
Power demand
MV-1501 MV-1701 MV-1901 MV-2101
110/220 VAC / 9...36 VDC
40 W 60 W 80 W 100 W
15” 17” 19” 21”
Viewable area of the screen
Angle of view
305 х 229 mm 337 х 270 mm 377 х 302 mm 432 х 324 mm
160° 170° 170° 178°
Contrast 400:1 1000:1 700:1 1000:1
Brightness 430 Cd/m
2
Cd/m
2
Response time 25 ms 5 ms 5 ms 5 ms
Resolution 1024 1280 х 1024 1600 х 1200
Point size 0.297 mm 0.264 mm 0.294 mm 0.27 mm
Vertical repetition frequency:
Horizontal repetition frequency:
Dimensions (mm)
Max. weight:
Protection class:
Storage temperature
Operating temperature
30–63 kHz
7 kg 9 kg
56–75 Hz
30–81 kHz
371х340.5х77 411.5х388х75
30–81 kHz
-55...+75°С
-25...+55°С
31–91 kHz
449х418х75 510х443х81
IP 22
12 kg 15 kg
Backlight intensity is adjusted by the dimmer and can be fully cancelled (“deep dimming”).
Unicont SPb Ltd Operating manual MV-1501/1701/1901/2101
4. MOUNTING AND CONNECTION
Device casing provides for it to be mounted on the desktop and on the plate.
If plate mounting is chosen, refer to the dimensional drawing (Figure 1) to prepare the location where the display is to be mounted to the control panel plate with fixing holes. If desktop mounting is chosen, attach the brackets to the display casing, prepare the location and tighten M5 screws to fix the display to the brackets.
Mounting being completed, lay connecting cables from external devices and connect it to the matching display connectors. Tighten the fixing screws to avoid their inadvertent disengagement.
After mounting and connection are completed, power the device up and ensure that the graphical data are properly output on the screen.
Video).
It is possible to connect several video signal sources (1 x VGA, 1 x DVI, 2 x AV and 1 x S-
Power Connector
Power
24 VDC
220 VAC
Pin 1
+18...36 VDC
L
Pin 2
0 VDC
N
Unicont SPb Ltd
DVI Connector
Operating manual MV-1501/1701/1901/2101
Pin number
1
Designation
DATA2-
Pin number
16
Designation
HOT PLUG DET
2 DATA2+ 17 DATA0-
3 DATA2/4 DATA0+
5 DATA4+ 20 DATA5-
8 ANALOG CLOCK+
10 DATA1+
Composite Connection (Composite Input)
display signal
Unicont SPb Ltd
S-Video Connector
Operating manual MV-1501/1701/1901/2101
Pin number Designation Pin number Designation
2 GND 4 Color
VGA Connector
Pin number Designation Pin number Designation
1 Red 9 NC
2 Green 10 GND
3 Blue 11 GND
4 GND 12 SDA
7 Green SCL
Unicont SPb Ltd Operating manual MV-1501/1701/1901/2101
Figure 1. Dimensions
Version
MV-1501
Dimension (mm)
A B C D E F G H I
371 357 60 220.5 58 14 340.5 311 343
MV-1701
411.5
MV-1901
MV-2101
509.5 410.5
Unicont SPb Ltd Operating manual MV-1501/1701/1901/2101
5. CONTROLS
Menu Access Button
Set Button (to apply changed parameters and to access menu items)
Dimmer (Backlight)
Power LED
Setting Selection and Change Buttons
Display Power on/off
Button (to choose video signal sources)
The following controls are located on the front panel:
1. Display Power on/off button (short-time pushing switches the display over cycle-wise according to the video signal sources).
2. “MENU”. Enter/exit button to access the display settings menu. When in the menu, this button allows to exit the active setting without saving the changed parameter.
3. “▲” and “▼”. Selection buttons to select a menu item/parameter measurement. When in the menu, this buttons allow to scroll up the items (settings) up and down. If any setting is changed, they are used to increase/decrease its value.
4. Dimmer to control the backlight intensity. Turn it up to the stop in direction right to maximize the backlight intensity. Turn it up to the stop in direction left to cancel it (no backlight).
5. Power LED shows that power is available and the device is operating. If power is on and video signals are received from the current video input, this LED is green. If power is off or no video signal available in the current input, the LED goes out.
Warning! Changing backlight intensity automatically and correspondingly changes the LEDlight intensity. If it is in the minimum (backlight cancelled), the LED will go out.
Unicont SPb Ltd Operating manual MV-1501/1701/1901/2101
6. TRANSPORTATION AND STORAGE
The battery charger shall be stored in heated space at air temperature of +5 ºС to +35 ºС
(maximum values of -55 ºС to +75 ºС), at relative humidity of air not exceeding 95 % at temperature of +25 °C and content of dust, oil, moisture and aggressive admixtures in the air not exceeding the norms envisaged by GOST 12.1.005-88 for the working zone of production areas.
The device shall be transported in transport container of the manufacturer in closed transport.
Means of transport:
automobile and railway closed transport (covered wagons, universal containers)
by air (in pressurized and heated bays of airplane)
by sea (in dry service spaces).
The device shall be transported in accordance with the transport regulations in force for the particular transport.
During handling operations and transportations strictly observe the requirements of handling marks on boxes and do not allow bumps and impacts which can affect preservation and serviceability of the device.
Packed devices shall be reliably secured in vehicles.
After storage in stores or transportation at temperature below +10 ºС the devices shall be unpacked only in heated spaces after keeping them unpacked in under normal climatic conditions for12 hours.
Unicont SPb Ltd Operating manual MV-1501/1701/1901/2101
7. WARRANTY
The manufacturer guarantees the unit complies with this manual provided that the operation, transportation and storage conditions are adhered to during the warranty period.
The unit’s warranty period expires 24 months from the date of its shipping from the manufacturer’s storehouse.
Within the warranty period, the owner is entitled for a free repair, or a replacement of a separate part, provided that the malfunction occurred through the manufacturer’s fault.
Warranty repair is provided if the unit is submitted with the manufacturer’s label and a legible serial number available on it, as well as this operating manual.
The manufacturer is not responsible and cannot guarantee the unit’s operation:
1. After the warranty period is over;
2. In case of the failure to observe the unit’s operation, transportation, storage and installation rules and conditions;
3. If the unit is in an unmarketable condition, or has a damaged body, and other causes beyond the manufacturer’s control;
4. If self-made electrical devices were used.
5. If there was an attempt to repair the unit by a person who is not an authorized representative of the manufacturer.
If the owner loses this operating manual or the manufacturer’s label with a serial number, the manufacturer shall not provide their copies, and the owner shall be divested of the right for a free repair during the warranty period.
Upon the warranty expiry, the manufacturer shall facilitate the repair of the unit at the owner’s expense.
Note: in case of warranty repair, the unit’s disassembling from the installation site and its delivery to the manufacturer’s service center are done at the owner’s expense.
Visit the manufacturer’s website www.unicont.spb.ru (section “support/warranty”) to find:
forms to fill in claims,
full warranty description;
full description of the warranty service rendering procedure.
The manufacturer service center’s address and contact details:
Unicont SPb, Ltd.
Bld. 26Е Kibalchich Str., Saint Petersburg, 192174, Russia
tel.: + 7 (812) 622 23 10, +7 (812) 622 23 11
fax: +7 (812) 362 76 36
e-mail: [email protected]
Unicont SPb Ltd Operating manual MV-1501/1701/1901/2101
8. DATE OF PACKING
Marine LCD Display name of article designation
Packed
Unicont SPb Ltd., Russia.
Manufacturer
№ serial number according to the requirements of the current technical documentation. post year, month, day
signature clarification of signature
9. ACCEPTANCE DETAILS
Marine LCD Display name of article designation
№ serial number was manufactured and accepted in accordance with the regulatory requirements of the state standards and applicable technical documentation, and is suitable for operation.
Quality control representative
Stamp
here signature clarification of signature year, month, day
10. DATE OF COMMISSIONING
Marine LCD Display name of article designation
№ serial number
The unit has been put into operation.
Date of installation:
Place of installation:
_________________________________________
_________________________________________
Person in charge of installation: _________________________________________
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project