W Audio

W Audio
Zenith is the new high-end passive speaker range offering superior performance and reliability which is
ideally suited to installation and high power sound reinforcement markets. Incorporating high-efficiency full
range drivers matched with high quality crossovers, the Zenith Series sustains high-power output without
any compromise to quality.
Zenith LA 80 Speaker
Peak Rated Power
Continuous (RMS) Power
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Horizontal coverage
Vertical coverage
Low Frequency Transducer
High Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
Specifcations:
160 Watts
80 Watts
93dB
75Hz - 19kHz
90 degrees
60 degrees
6.5” / 164mm
1” / 26mm
8 Ohms
Spring terminals
No
Multiple (10mm)
Titanium compression driver
Robust birch ply cabinet
Dimensions: Weight: 213 x 373 x 218mm
6.8Kg
Order code: SPEA50
Zenith 110 Speaker
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
High Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
1000 Watts
250 Watts
126dB
97dB
65Hz-20kHz
70Hz-20kHz
2.1kHz
80 degrees
60 degrees
10”/254mm
1”/26mm
8 Ohms
2 x NL4 Speakon
Yes
Multiple (10mm)
Titanium compression driver
Recessed handles
Pole mount adapters
Robust birch ply cabinet
Dimensions: Weight:
536 x 315 x 315mm
17Kg
Order code: SPEA51
1
Zenith 112 Speaker
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
High Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
1200 Watts
300 Watts
128dB
97dB
50Hz-20kHz
60Hz-20kHz
2.0kHz
90 degrees
60 degrees
12”/300mm
1”/26mm
8 Ohms
2 x NL4 Speakon
Yes
Multiple (10mm)
Titanium compression driver
Recessed handles
Pole mount adapters
Robust birch ply cabinet
Dimensions: Weight: 656 x 405 x 415mm
30Kg
Order code: SPEA52
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
High Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
1400 Watts
350 Watts
130dB
97dB
45Hz-20kHz
50Hz-20kHz
1.8kHz
90 degrees
60 degrees
15”/381mm
1”/26mm
8 Ohms
2 x NL4 Speakon
Yes
Multiple (10mm)
Titanium compression driver
Recessed handles
Pole mount adapters
Robust birch ply cabinet
Dimensions: Weight: 740 x 485 x 495mm
38Kg
Order code: SPEA53
Zenith 115 Speaker
2
The Zenith range is further enhanced with both single and twin chassis bass enclosures and a single chassis
powered model. This range is also ideally suited to enhance the PSR range of cabinets where more bass is
required.
Zenith S115/118 Bass Enclosure
S115
S118
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Low Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
2400 Watts
600 Watts
132dB
99dB
45Hz-220Hz
50Hz-220Hz
15”/381mm
8 Ohms
2 x NL4 Speakon
Yes
Multiple (10mm)
Recessed handles
Robust birch ply cabinet
2600 Watts
650 Watts
133dB
99dB
40Hz-220Hz
48Hz-220Hz
18”/457mm
8 Ohms
2 x NL4 Speakon
Yes
Multiple (10mm)
Recessed handles
Robust birch ply cabinet
Dimensions: Weight: 450 x 560 x 635mm
31Kg
535 x 645 x 620mm
40.5Kg
Order code: SPEA55
SPEA56
Zenith S215 Bass Enclosure
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Low Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
4000 Watts
1000 Watts
135dB
99dB
35Hz-800Hz
45Hz-1000Hz
2 x 15”/381mm
8 Ohms
2 x NL4 Speakon
Yes
Multiple (10mm)
Recessed handles
Robust birch ply cabinet
Dimensions
Weight
915 x 585 x 700mm
74Kg
Order code: SPEA57
3
Zenith S218 Bass Enclosure
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Low Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
4800 Watts
1200 Watts
137dB
99dB
35Hz-2000Hz
40Hz-2000Hz
2 x 18”/457mm
4 Ohms
2 x NL4 Speakon
Yes
Multiple (10mm)
Recessed handles
Robust birch ply cabinet
Dimensions
Weight
1105 x 635 x 720mm
76Kg
Order code: SPEA58
The WSR 115P powered 15” Bass Cabinet offers the superior performance of the passive range, but
with the added convenience of a perfectly matched 600 watt internal amplifier. This unit will also
complement the W Audio PSR range of speakers.
Zenith WSR 115P
Output Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Low Frequency Transducer
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
600 Watts
130dB
99dB
45Hz-220Hz
50Hz-200Hz
80 - 200Hz adjustable
15”/381mm
2 x XLR/RCA
Yes
Multiple (10mm)
Recessed handles
Heavy-duty protective grille
Heavy duty wheel board
Power Supply
Dimensions: Weight: 240v
450 x 560 x 720mm
49Kg
Order code: SPEA47A
Wheel board included
4
The WSR 210 and WSR 212 passive bass cabinets from W Audio are ideally suited to installations
where additional bass is required, but where space is an issue. Both units offer very good power handling
coupled with high efficiency drivers resulting in amazing Sound Pressure Levels for their size.
WSR 210
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency range (-3dB)
Low Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
1200 Watts
300 Watts
127dB
98dB
40Hz-200Hz
48Hz-160Hz
2 x 10”/2 x 254mm
4 Ohms
2 x NL4 Speakon
N/A
N/A
Robust cabinet finish
Recessed handles
Dimensions: Weight: 400 x 650 x 445mm
32.5Kg
Order code: SPEA45
WSR 212
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency range (-3dB)
Low Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
3200 Watts
800 Watts
133dB
101dB
30Hz-200Hz
45Hz-170Hz
2 x 12”/2 x 300mm
8 Ohms
2 x NL4 Speakon
Yes
N/A
Robust cabinet finish
Recessed handles
Specifications:
Dimensions: Weight: 700 x 510 x 620mm
47.5Kg each
Order code: SPEA46
5
W Audio sets new standards in loudspeaker technology with the PSR range of cabinets. Both the Passive
and Active ranges offer superior sound quality, coupled with high power capability and outstanding build
quality. All cabinets within the range are supplied with heavy duty padded/zipped road covers. The active
range also has a comprehensive E.Q. section onboard.
PSR 15 Speaker
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
High Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
1400 Watts
350 Watts
129.5dB
97dB
40Hz - 20kHz
45Hz-18kHz
1.7kHz
80 degrees
60 degrees
15”/381mm
1.75”/44.5mm
8 Ohms
2 x NL4 Speakon
Yes
Multiple (10mm)
Heavy Duty road covers
High impact polypropylene
enclosure
Dimensions: Weight: 740 x 475 x 400mm
25Kg
Order code: SPEA33
Output Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
High Frequency Transducer
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
400 Watts
128.5dB
99dB
40Hz - 20kHz
45Hz-18kHz
2.6kHz
80 degrees
60 degrees
15”/381mm
1.75”/44.5mm
2 x microphone (6.35mm Jack)
1 x line input (XLR)
1 x mix/line output (XLR)
Yes
Multiple (10mm)
Independent level control for Line & Microphone inputs
Master level control and EQ
Heavy Duty road covers
High impact polypropylene
enclosure
Power supply:
Dimensions: Weight: 240v
740 x 475 x 400mm
30Kg
Order code: SPEA33A
Covers included
PSR 15A Speaker
Covers included
6
PSR 12 Speaker
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
High Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
1200 Watts
300 Watts
127dB
97dB
40Hz - 20kHz
50Hz-18kHz
2.0kHz
80 degrees
60 degrees
12”/300mm
1.75”/44.5mm
8 Ohms
2 x NL4 Speakon
Yes
Multiple (10mm)
Heavy Duty road covers
High impact polypropylene
Enclosure
Dimensions: Weight: 615 x 416 x 365mm
21Kg
Order code: SPEA32
Covers included
PSR 12A Speaker
Output Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
High Frequency Transducer
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
350 Watts
127dB
97dB
40Hz - 20kHz
50Hz-18kHz
2.2kHz
80 degrees
60 degrees
12”/300mm
1.75”/44.5mm
2 x microphone (6.35mm Jack)
1 x line input (XLR)
1 x mix/line output (XLR)
Yes
Multiple (10mm)
Independent level control
for Line & Microphone inputs
Master level control and EQ
Heavy Duty road covers
High impact polypropylene
enclosure
Power supply:
Dimensions: Weight: 240v
615 x 416 x 365mm
25Kg
Order code: SPEA32A
7
Covers included
PSR 8 Speaker
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
High Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
480 Watts
120 Watts
120dB
94dB
60Hz - 20kHz
70Hz-20kHz
3.5kHz
90 degrees
60 degrees
8”/203mm
1.5”/34mm
8 Ohms
2 x NL4 Speakon
Yes
Multiple (10mm)
Heavy Duty road covers
High impact polypropylene
enclosure
Dimensions: Weight: 435 x 255 x 245mm
8Kg
Order code: SPEA30
Covers included
PSR 8A Speaker
Output Power
Maximum Calculated SPL
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
High Frequency Transducer
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
150 Watts
117dB
94dB
60Hz - 20kHz
70Hz-20kHz
3.5kHz
90 degrees
60 degrees
8”/203mm
1.5”/34mm
1 x microphone (6.35mm Jack)
1 x line input (XLR)
1 x mix/line output (XLR)
Yes
Multiple (10mm)
Independent level control for Line & Microphone inputs
Master level control
Heavy Duty road covers
High impact polypropylene
enclosure
Power supply:
Dimensions: Weight: 240v
435 x 255 x 245mm
9.5Kg
Order code: SPEA30A
Covers included
8
The PS Range from W Audio offers either a 12” or 15” two way cabinet at an affordable price whilst still
offering the user good power handling. A heavy duty crossover, built-in horn protection, full metal grill and
built in pole mount adaptors make these units ideal for most applications.
PS 12 Speaker
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Other Features
Specifications:
300 Watts
150 Watts
118dB
55Hz - 20kHz
70Hz - 20Khz
4Khz
90 degrees
45 degrees
12”/300mm
8 Ohms
Speakon x 2
Yes
Full metal grill
Built-in stand adaptor
Dimensions
Weight
380 x 310 x 500mm
13Kg
Order code: SPEA06
PS 15 Speaker
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Other Features
Specifications:
500 Watts
250 Watts
122dB
40Hz - 20kHz
55Hz - 20Khz
4Khz
90 degrees
45 degrees
15”/381mm
8 Ohms
Speakon x 2
Yes
Full metal grill
Built-in stand adaptor
Dimensions
Weight
495 x 405 x 650mm
23Kg
Order code: SPEA07
9
The DJ Range from W Audio utilises updated technology for improved performance and sound dispersion
at an affordable price point. These 12” and 15” two way trapezoidal cabinets offer enhanced power
handling, whilst still being lightweight and rugged. A heavy duty crossover, built-in horn protection, full
metal grill and built in pole mount adaptors make these units ideal for most applications.
DJ 12 Speaker
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Other Features
Specifications:
400 Watts
200 Watts
120dB
60Hz - 20kHz
80Hz - 18kHz
3.5Khz
90 degrees
45 degrees
12”/300mm
8 Ohms
Speakon x 2
Yes
Full metal grill
Built-in stand adaptor
Built-in horn protection
Dimensions
Weight
365 x 300 x 490mm
13Kg
Order code: SPEA02
DJ 15 Speaker
Peak Rated Power
Continuous (RMS) Power
Maximum Calculated SPL
Frequency Range (-10dB)
Frequency Range (-3dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Other Features
Specifications:
600 Watts
300 Watts
129dB
40Hz - 20kHz
60Hz - 18kHz
3.5kHz
90 degrees
45 degrees
15”/381mm
8 Ohms
Speakon x 2
Yes
Full metal grill
Built-in stand adaptor
Built-in horn protection
Dimensions
Weight
495 x 405 x 650mm
23Kg
Order code: SPEA01
10
The Gig Rig 1000 from W Audio offers an impressive 1,000 watt system from only one powered
subwoofer, and two passive satellites offering one of the best power to weight ratios currently available on
the market. From background ambience to a big rock-the-house sound the Gig Rig 1000 delivers it all with
no compromise in sound quality or performance. Size, weight, performance and sound quality and all at
an amazing price.
Gig Rig 1000
System
Subwoofer amplifier Satellite amplifier Controls
Limiters
Other features
Subwoofer
Low Frequency Transducer
Connections
Specifications:
1 x 600 Watts RMS
2 x 200 Watts RMS
Master Volume
Master 3 band EQ
Individual level control of Left & Right Satellite and Sub.
3 (2 x Satellite, 1 x Sub)
Bridge Mono/Stereo switch, Ground Lift
Stands included
Satellite
Mid Frequency Transducer
1 x 15”/381mm
High Frequency Transducer
Line Input: XLR or Jack
Connections
Line Output: XLR
Satellite Output: Speakon
Specifications:
Power Supply:
Dimensions:
Weight:
240v
720 x 460 x 526mm
51.72Kgs
Order code: SPEA40
11
Dimensions:
Weight:
1 x 8”/203mm
1 x 1” /26mm
1 x NL4 Speakon
268 x 296 x 430mm
11.58Kgs
The W Audio BGS 45 combines high performance, compact design and rugged construction into a
loudspeaker with unprecedented versatility. The BGS 45 is perfect for applications where tight corners and
tough angles need to be overcome.
BGS 45 Speaker
Peak Rated Power
Efficiency (1 watt / 1 metre)
Frequency Range (-10dB)
Crossover Frequency
Horizontal coverage
Vertical coverage
Low Frequency Transducer
High Frequency Transducer
Nominal Impedance
Connections
Pole Mountable
Rigging Points
Other Features
Specifications:
45 Watts
N/A
45Hz-20Khz
4 kHz
N/A
N/A
5.25”/133.35mm
0.5”/13mm
8 Ohms
Spring terminals
N/A
N/A
2 Way plastic enclosure
Adjustable mounting
brackets included
Dimensions: Weight: 220 x 210 x 300mm
5Kg each
Order code: SPEA04 (black)
SPEA03 (white)
The CR 6 is a compact, easy to use, and versatile two zone mixer offering 6 stereo channels plus main
microphone, with full override facility. Despite its small size this unit is packed with quality features normally
only found on far more expensive models.
CR 6 Mixer
Main Microphone
Main inputs
Facilities
Specifications:
Auto-ducking with adjustable sensitivity and delay time.
Gain control & EQ
6 x Line, 2 x Additional Microphones and 1 x Phono input
Assign any input to any zone
Assign main microphone to any zone
Gain, EQ, Pan and Stereo/Mono selection on both zones
Headphone output with level control
Balanced microphone input on front and rear
Rear panel attenuation
Power Supply
Dimensions
Weight
240v
483 x 44 x 200mm
2.2 kgs
Order code
MIXE01
12
The Digimix II by W Audio is a compact 10 channel, 800 Watt powered mixing desk. Packed with easy to
use features which include in-built effects processor with 99 pre-sets, 7 band switchable master EQ,
2 x aux send & returns, sub mix facility and phantom power.
Digimix
II
Powered Mixing Desk
Features:
2 x 400 Watts Per channel @ 4 ohms (250 Watts Per channel @ 8 Ohms)
20 bit DSP with 99 pre-sets
10 Channel inputs (6 x microphone/mono line plus 4 x stereo)
All microphone input channels feature;
3 band EQ with sweepable mid
Gain and Pan controls
Low Cut switch
Insert facility
4 band EQ on all stereo input channels with balance control
Electronically balanced inputs
2 x Aux Send and Return systems (Pre/Post)
7 Band switchable Master EQ
Independent PSU & inputs to amplifier (allows either mixer to be used
unpowered, or amplifier to be used as separate slave amplifier)
Full PFL/Solo function
Easy to use “Control Room” function
2 Track Tape In/Out facility
Phantom power
Specification:
Insert facility on Master and Sub mix
12 segment multi function bar graph meter
Power Supply
Mixer outputs: XLR & Jack
Dimensions
Amplifier inputs: Jack
Weight
Amplifier outputs: Speakon & Binding Post
Supplied with 19” rack mount kit
Order code
Jack socket for footswitch
13
240v
375 x 494 x 155mm
14 kgs
MIXE08
The MCA 4 and MA8 200 from W Audio are versatile multi channel amplifiers which offer the installer
and user complete flexibility at an affordable price. Both units offer BUS in facility as well as individual
channel inputs to make installation as quick and easy as possible.
MCA 4 Amplifier
Configuration 1
Configuration 2
Configuration 3
Frequency Response
Signal to Noise Ratio
Input Connectors
Output Connectors
Protection
Fan Cooled
Ground Lift
Indicators
Other Features
Specification:
4 x 300 Watts @ 4 Ohms
2 x 300 Watts @ 4 Ohms + 1 x 600 Watts @ 8 Ohms
2 x 600 Watts @ 8 Ohms
20Hz - 25kHz
100dB
XLR
Binding Post
DC, Thermal overload and
Circuit breaker
Yes
No
Power, Signal, Clip, Protect
Bass and Treble controls for each channel.
Balanced BUS in available.
Limiter
Power Supply Dimensions Weight 240v
89 x 483 x 496 mm
16kgs
Order code:
AMP01
MA8 200 Amplifier
Stereo Output @ 4 Ohms
Stereo Output @ 8 Ohms
Bridge Output @ 4 Ohms
Frequency Response
Signal to Noise Ratio
Input Connectors
Output Connectors
Protection
Fan Cooled
Ground Lift
Indicators
Other features
Specification
200 Watts x 8
150 Watts x 8
400 Watts x 4
20Hz – 20KHz
95dB
8 x Jack
8 x Speakon
DC, Thermal, Overload
Yes
No
Power, Signal, Clip, Protect
Bass and Treble controls for
each channel
Two selectable BUS in –
can be selected on any channel Unique in-built monitor function
allows the user to hear each
individual channel via in-built speaker
Power supply
Dimensions
Weight
240v
483 x 478.5 x 88mm
21.4Kgs
Order code:
AMP02
14
The DA Series of professional power amplifiers is designed to achieve unsurpassed performance and long
term reliability, whilst still being affordable. This proven amplifier technology has been used for many
applications including back ground music systems, small clubs, mobile DJ’s, karaoke, churches, and
multi-purpose venues alike.
DA Amplifier Series
DA 300, 500 & 800 Back View
DA 1000 & 1300 Back View
Features:
Volume control position indicators.
Peak level indicators.
Protect mode indicators.
Fan cooled.
Soft start.
Short circuit and thermal protection.
Limiter - DA1000 & DA1300.
Ground lift - DA1000 & DA1300.
Inputs:
DA300
DA500
DA800
DA1000
DA1300
Stereo Output @ 4 Ohms x 2
Stereo Output @ 8 Ohms x 2
Bridge Output @ 8 Ohms x 2
Power Supply
Dimensions (mm)
Weight
150 Watts
90 Watts
N/A
240v 483 x 88 x 294
10.0kgs
250 Watts 180 Watts N/A
240V 483 x 88 x 294
12kgs
400 Watts
270 Watts
N/A
240v
483 x 88 x 395
14Kgs
500 Watts
300 Watts
1000 Watts
240v
483 x 88 x 395
15Kgs
650 Watts
390 Watts
1300 Watts
240v
483 x 88 x 395
17Kgs
Order code
AMP14
AMP15
AMP16
AMP17
AMP18
Jack and Phono
Jack and XLR
Outputs:
Speakon, Jack and Binding Post
Speakon and Binding Post
Specifications:
15
The DAP Switch Mode range from W Audio offers professional users extraordinary audio performance,
reliability and reduced weight.With Switch Mode technology, DAP amplifiers give you tighter bass and cleaner
transparent highs, whilst cutting wasted heat, thus making them more efficient than traditional amplifiers.
DAP Amplifier Series
DAP 1100
DAP 2100
Features:
DAP switching technology - for improved audio performance.
High efficiency, linear output circuit lowers AC current
consumption and cooling requirements by 40% or more.
Clip limiter reduces distortion, protects speakers.
Advanced thermal system for superior cooling.
Gain controls with 2 dB steps for easy setting.
Comprehensive LED status arrays.
Variable speed fan for quiet operation.
DC and thermal overload protection.
Input connectors: Neutrik Combo Jack & XLR.
Output connectors: Neutrik Speakon.
Specifications:
DAP1100
DAP2100
Stereo Output @ 8 Ohms Stereo Output @ 4 Ohms Stereo Output @ 2 Ohms Bridge Output @ 8 Ohms Bridge Output @ 4 Ohms Parallel Output @ 4 Ohms Parallel Output @ 2 Ohms Power Supply
Dimensions (mm)
Weight
270 Watts x 2
525 Watts x 2
650 Watts x 2
1050 Watts
1250 Watts
525 Watts x 2
650 Watts x 2
240v
483 x 44 x 500
10.5kgs
525 Watts x 2
1050 Watts x 2
1260 Watts x 2
2000 Watts
2400 Watts
1050 Watts x 2
1260 Watts x 2
240v
483 x 88 x 485
15kgs
Order code: AMP30
AMP31
16
The Zenith Series from W Audio has been designed and engineered to work in any demanding
installation or touring environment without compromise. Oversized multi-speed fans and large heat sinks
keep the output stage cool even under the most extreme conditions, whilst the switchable limiter system is
controlled by a high speed VCA chip that will limit both PEAK and RMS power to prevent clipping of the
output stage.
Zenith 3000 Amplifier
Specifications
Stereo Output @ 4 ohms
Stereo Output @ 8 ohms
Bridge Output @ 8 ohms
Frequency Response
Signal to Noise Ratio
Input Connectors
Output Connectors
Protection
Fan Cooled
Ground Lift
Indicators
Low Cut Filter
Filters / Cross Over
Other Features
Specification:
1600 Watts x 2
1000 Watts x 2
3000 Watts
20Hz - 25kHz
107dB
Balanced XLR
Neutrik Speakon, Binding Post
DC & Thermal overload
Yes,Variable
Yes
Power, Signal, Active, Clip
Yes
High Pass, Low Pass
Full range line out
Stereo, Parallel and Bridge
Circuit Breaker Protection
Heavy duty welded steel chassis
Power Supply Dimensions Weight 240v
483 x 89 x 462mm
23kgs
Order code: AMP05
17
Zenith 2K5 Amplifier
Specifications
Stereo Output @ 2 ohms
Stereo Output @ 4 ohms
Stereo Output @ 8 ohms
Bridge Output @ 4 ohms
Bridge Output @ 8 ohms
Frequency Response
Signal to Noise Ratio
Input Connectors
Output Connectors
Protection
Fan Cooled
Ground Lift
Indicators
Low Cut Filter
Filters / Cross Over
Other Features
Specification:
1250 Watts x 2
900 Watts x 2
540 Watts x 2
2500 Watts
1800 Watts
20Hz - 25kHz
107dB
Balanced XLR
Neutrik Speakon, Binding Post
DC & Thermal overload
Yes,Variable
Yes
Power, Signal, Active, Clip
Yes
High Pass, Low Pass
Full range line out
Stereo, Parallel and Bridge
Circuit Breaker Protection
Heavy duty welded steel chassis
Power Supply Dimensions Weight 240v
483 x 89 x 496mm
23kgs
Order code: AMP11
18
The W Audio TPT Series has been engineered with a wide audio frequency range, high signal to noise
ratio and outstanding performance equal to that of many professional wireless systems costing much more.
This is achieved through strict component selection and high quality circuit design.
TPT 202 UHF Range
Code
Type
Frequency
MIC33
MIC33A
MIC34
MIC34A
MIC35
MIC35A
Twin Handheld
Twin Handheld
Twin Headset
Twin Headset
Twin Lapel
Twin Lapel
863.13/864.05
863.65/864.82
863.13/864.05
863.65/864.82
863.13/864.05
863.65/864.82
All Models feature;
Rack mount Kit, with option to mount aerials at front or back
Noise lock dual-squelch circuitry eliminates signal and random noise interference in stand by mode
Separate RF signal and audio output level LED’s.
Latest SMD technology printed circuit board ensures durable and stable quality.
High quality microphone capsule
All model specifications:
Handheld Models feature;
Power Supply: 14V - 800mA (by adaptor included)
395
Multiple coloured microphone and channel identifiers Dimensions:
x 207 x 51mm
(receiver
only)
19
TPT 101 VHF Range
Code
Type
Frequency
MIC30
MIC30A
MIC31
MIC31A
MIC32
MIC32A
Twin Handheld
Twin Handheld
Twin Headset
Twin Headset
Twin Lapel
Twin Lapel
173.0/174.5
173.8/175.0
173.0/174.5
173.8/175.0
173.0/174.5
173.8/175.0
All Models feature;
Rack mount Kit, with option to mount aerials at front or back
Noise lock dual-squelch circuitry eliminates signal and random noise interference in stand by mode
Separate RF signal and audio output level LED’s.
Latest SMD technology printed circuit board ensures durable and stable quality.
High quality microphone capsule
All model specifications:
Handheld Models feature;
Power Supply: 14V - 450mA (by adaptor included)
Multiple coloured microphone and channel identifiers
Dimensions: 395 x 207 x 51mm (receiver only)
20
The W Audio TP Series VHF wireless systems are a direct response to the needs and desires of
professionals as well as non professional users. The advanced circuitry of the systems provides reliable
transmission and reception with an extremely long transmission range.
TP 200 VHF Range
Code
Type
Frequency
Twin Handheld
Twin Handheld
Twin Headset
Twin Headset
Twin Lapel
Twin Lapel
173.0/174.5
173.8/175.0
173.0/174.5
173.8/175.0
173.0/174.5
173.8/175.0
MIC23
MIC23A
MIC24
MIC24A
MIC25
MIC25A
All Models feature;
Noise lock dual-squelch circuitry eliminates signal and random noise interference in stand by mode
Separate RF signal and audio output level LED’s.
Latest SMD technology printed circuit board ensures durable and stable quality.
High quality microphone capsule
Robust carry case
All model specifications:
Handheld Models feature;
Power Supply: 14V - 450mA (by adaptor included)
Multiple coloured microphone and channel identifiers
Dimensions: 213 x 154 x 40mm (receiver only)
21
TP 100 VHF Range
Code
Type
Frequency
MIC20
MIC20A
MIC20B
MIC20C
MIC21A
MIC21C
MIC22
MIC22B
Single Handheld
Single Handheld
Single Handheld
Single Handheld
Single Headset
Single Headset
Single Lapel
Single Lapel
173.0
173.8
174.5
175.0
173.8
175.0
173.0
174.5
All Models feature;
Dual quartz-controlled diversity receiver
Noise lock dual-squelch circuitry eliminates signal and random noise interference in stand by mode
Separate RF signal and audio output level LED’s.
Latest SMD technology printed circuit board ensures durable and stable quality.
High quality microphone capsule
Robust carry case
All model specifications:
Power Supply: 14V - 300mA (by adaptor included)
Handheld Models feature;
Dimensions: 213 x 154 x 40mm (receiver only)
Multiple coloured microphone and channel identifiers
22
The RM series from W Audio has been designed to give users a microphone system without the reduction
in quality and reliability which was normally associated with budget units and is ideally suited to DJ’s,
karaoke and home use.
RM 01 Radio Microphone
Features:
Handheld microphone
Up to 100 metre range
Unwanted noise reduction facility
Power, Signal and Audio indicators
Output level control
Unbalanced ¼” Mono Jack output
Available frequencies: 173.8 & 175.0
Specification:
Power supply: Dimensions: Weight: 240v
400 x 290 x 110mm
1.8kgs
Order code: MIC10
RM 05 Radio Microphone Pack
Features:
Handheld microphone
Lapel microphone
Headband microphone
Up to 100 metre range
Unwanted noise reduction facility
Power, Signal and Audio indicators
Output level control
Unbalanced ¼” Mono Jack output
Available frequencies: 173.8 & 175.0
Specification:
Power supply: Dimensions: Weight: 240v
400 x 290 x 110mm
2.2kgs
Order code: MIC13
23
The revolutionary GTR 1 UHF plug in guitar transmitter is less than half the size of a conventional unit but
offers all the features. Powered by a single AAA battery and weighing only 40 grammes this unit removes
the need for traditional body transmitter packs and is the ultimate in wireless for any guitarist.
Guitar Transmitter Pack
Features:
Transmitter Unit
On/Off and mute switch
High/Medium/Low pick up adjustment
1 x ¼”/6.3mm Mono Jack
Receiver Unit
On/Off switch
Input attenuation switch -10 / 0 / +10
Output level control
LED indicators for RF signal, Audio/Signal present, Power, Low battery
DC adaptor input / Battery compartment
1 x ¼”/ 6.3mm Mono Jack output
Specifications
Transmitter
Power supply: 1 x AAA battery
Dimensions:
75 x 25 x 20mm
Weight:
0.04Kgs
Order code:
Receiver
2 x 1.5v battery
or 9v adaptor (included)
130 x 80 x 46mm
0.18Kgs
MIC50 - Frequency - 863.5 MHz
MIC50A - Frequency - 864.8 MHz
The DI 300 from W Audio offers an Active/Passive DI box in a rugged housing with features normally only
found in more expensive units. The addition of a link out facility makes this unit even more flexible than
many others currently available.
DI 300 Active DI Box
Features:
Unbalanced XLR or ¼” Mono Jack input
¼” Mono Jack link out for connection to monitor amp or similar
Up to 40dB attenuation to compensate for high gain inputs
Ground lift switch to eliminate ground loop problems
9v Battery or Phantom power option (18 to 48v)
Balanced XLR output
Stylish, ultra-compact, rugged housing
High quality components
Specification:
Power supply: 9v Battery or Phantom
Dimensions: 120 x 120 x 40mm
Weight: 0.5kgs
Order code: DI01
Rear View
24
Leads & cables
Signal Leads
25
Connector Connector
Length
Order code
2 x Phono
2 x Phono
2 x Phono
2 x Phono
2 x Phono
2 x Phono
1.5m
5m
10m
CABL52
CABL53
CABL54
3.5 Stereo Jack
2 x Phono
1.5m
CABL63
2 x Phono
2 x Mono 6.35 Jack
1.5m
CABL50
2 x Phono
2 x XLR Male
2m
CABL67
2 x Phono
2 x XLR Female
2m
CABL68
1 x Phono
2 x Phono Socket
20cm
CABL72
1 x 6.35 Stereo Jack
2 x 6.35 Mono Jack
2m
CABL51
1 x 6.35 Stereo Jack
2 x XLR Male
2m
CABL73
1 x 6.35 Mono Jack
1 x XLR Male
1.5m
CABL64
1 x 6.35 Mono Jack
1 x 6.35 Mono Jack
1 x 6.35 Mono Jack
1 x 6.35 Mono Jack
1m
1.5m
CABL60
CABL61
1 x 6.35 Mono Jack
2 x 6.35 Mono Jack
1.5m
CABL62
2 x 6.35 Mono Jack
2 x XLR Male
2m
CABL65
2 x 6.35 Mono Jack
2 x XLR Female
2m
CABL66
Leads & Cables
Speaker Leads
Microphone Leads
Stage Snakes
Cable
Connector
Connector
Length x CSA
Order code
Speakon
Speakon
Speakon
Speakon
Speakon
Speakon
3m x 2 @ 1.5mm 5m x 2 @ 1.5mm 10m x 2 @ 1.5mm
CABL20
CABL21
CABL22
Speakon
Speakon
Speakon
Jack
Jack
Jack
3m x 2 @ 1.5mm 5m x 2 @ 1.5mm
10m x 2 @ 1.5mm
CABL23
CABL24
CABL25
Jack
Jack
Jack
Jack
Jack
Jack
3m x 2 @ 1.5mm 5m x 2 @ 1.5mm 10m x 2 @ 1.5mm CABL26
CABL27
CABL28
Connector
Connector
Cable
Order code
Jack
Jack
Jack
XLR Female
XLR Female
XLR Female
5m Black
5m Green
5m Blue
CABL56
CABL58
CABL59
XLR Male
XLR Female
5m Black
CABL55
Connector
Connector
Cable
12 x XLR Male
12 x XLR Female
12 x XLR Male
12 x XLR Female
8 x XLR in
4 x XLR out
2
2
2
2
2
2
2
2
2
6m
Order code
CABL84
15m
CABL85
8 x XLR Male
4 x XLR Female
6m
CABL80
8 x XLR in
4 x XLR out
8 x XLR Male
4 x XLR Female
15m
CABL81
Type
Size
Length
Order code
Speaker
Speaker
Mic
2 @ 1.5mm
2 @ 2.5mm
6mm OD
2
2
100m
100m
100m
CABL01
CABL02
CABL06
26
Further brochures of our extensive product ranges are available from
your local dealer.
Alternatively why not go direct to our website at www.prolight.co.uk where you
will find the complete range including the very latest New Products, along with
lighting videos, and downloadable instruction manuals
w w w . p r o l i g h t . c o . u k
Due to our policy of continuous improvement, product specification is subject to change without prior notice. E&OE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement