D-Series Operator Synchronisation Diagram

D-Series Operator Synchronisation Diagram
CENTURION
D5-Evo/D10 synchronisation diagram
Two synchronised gates opening
A
A A ry -
ir mis a LD E eff] Te wi la md] Re ed
fc НОЙ, —] i 6 a —
==
A А
be №.
Motor 2 (Master)
controller
Motor 1 (Slave)
controller
NG A
Master controller settings
Safety
/ | \ External gate indication status Indicator output ........................ AUX IO
Closed indication....................... Off
Part close indication.............. Off
Closing Indication Off
Part open indication............... Off
Opening indication.................. On
Crremidicatoón. . << UN
Pedestrian indication............. Off
Unknown indication Off
Slave controller settings
E :1) Autoclose
Ш Autoclose status On
= Autoclose timer 0 seconds
* Remote controls need to be programmed in Master controller receiver
* If the pedestrian function is required, either connect the receiver's Normally-Open output to the PED terminal on the
Slave controller or learn the remote to activate the PED function on the Slave controller receiver
0.07 4.0160
www.centsys.com
E&OE Centurion Systema (Pry) Lrd reserves the right ro change any product without prior notice
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement