ADAPTEc

ADAPTEc
ADAPT Extract
TM
Extract air diffuser for the WISE system
ADAPT Extract
Quick facts
►►Active damper
►►Pressure-dependent and cleanable
►►Integrated sensor module
►►Simple wiring, Plug & Play
►►Communication via Modbus RTU
►►Supplied complete with junction box (master)
►►Complemented with the WISE templates,
containing detailed descriptions for planning
►► Allows for control of (When used as master):
– Heat alternatively, cooling valve
(max. 3 actuators per master)
– Slaves (supply or extract air, 3 pcs)
– Lighting (via relay)
Quick Selection
AIR FLOW – SOUND LEVEL
max q (l/s)
Size
min q*)
(l/s)
50 Pa / 30 dB(A)
80 Pa / 35 dB(A)
200
0/5
50
85
250
0/10
65
100
*)
The first value indicates closed damper, the second value
indicates lowest adjustable air flow.
1
WISE
Technical Description
Design
ADAPT is a series of flow-controlled supply air diffusers for
the Swegon WISE system:
• The air diffuser controls the airflow with an active damper
inside the commissioning box, see figure 1.
• An ADAPT diffuser is always supplied with a
commissioning box.
• Inside the air diffuser, is a controller providing all the
required set points and control functions as well as a
multi-functional sensor module, see figure 1.
Functions in the Master diffuser
• Cools/heats and ventilates with air.
• Two stage cooling with water in the second stage, cannot
be combined with heating.
• Controls airflow with regard to temperature and presence.
• Ventilation boost after longer periods of unoccupancy.
• Provision for wiring to a CO2 controller.
• Provision for manually setting set points.
• Has provision for connection to a main control system
(Modbus).
• Emergency functions for closing / opening of the damper.
• Control of the heating in sequence unless 2-stage
cooling has been selected.
• Indication via LED. Indicates current operating mode and
warns of malfunctions in the diffuser.
• Comfort control indicated by the LED if the room temperature or CO2 value deviates too much from the set point,
not activated by default.
Planning – WISE Templates
See separate documentation, ”WISE Project manual”,
available for download from www.swegon.se.
In addition, Swegon sales personnel can supply WISE
templates containing descriptions with detailed information
regarding functionality, flowcharts, wiring diagrams and
demarcation list for various constructions.
1
Sensor module
2
A sensor module is integrated in all ADAPT supply air
diffusers, containing the following functions:
3
• A temperature sensor controls the airflow to maintain
required temperature in the room.
• A presence detector makes it possible to save additional
energy by lowering the airflow when there are no occupants in the room.
• The presence signal from the air diffuser can be fetched
for controlling the lighting, for instance, and in this way
save more energy.
Figure 1. The sensor module of ADAPT Extract
with connection for TUNE Adapt.
1. Temperature detector
2. In-operation indicator, green, red and orange LED.
3. Presence detector
Connectivity
In each delivery of a master diffuser, a CONNECT Adapt
junction box is included:
• The junction box replaces the coupling box which otherwise is mounted on a wall/ceiling for wiring a 24 V supply
voltage to the air diffuser and Modbus networks.
• Both air diffuser and junction box are equipped with RJ45
quick-fit connectors for quick and fault-free wiring.
• The device has provision for connection to a main control
system (BMS/SCADA) via ModBus.
• Accessory cable, LINK Modbus (RJ12) can be connected
between air diffuser and junction box. The air diffuser will
then be ready for the main control system.
• From the junction box, control functions for heating in
sequence, CO2 sensor and set point adjuster, can also be
connected.
2
Swegon reserves the right to alter specifications.
Figure 2. Junction box, CONNECT Adapt.
20130503
www.swegon.com
WISE
Installation
Maintenance
A detailed installation instruction is enclosed with each
delivery and can also be downloaded from www.swegon.
• The ADAPT air terminals can be cleaned on the outside, if necessary, using lukewarm water with dishwashing detergent added.
• The duct system is accessible without need for tools.
(See the separate installation instruction)
1.The commissioning box can be suspended from a ceiling
and connected to duct system. Use hanger system A or B.
2.Press the ADAPT Extract air diffuser into the outlet of
the commissioning box and secure it with screws or pop
rivets. Readjust the hanger rods of the commissioning box
if needed, so that the air diffuser sits tight against the ceiling, or the modular suspended ceiling.
Declaration
Declaration of Construction Materials is available for download from www.swegon.com.
Electrical data
ADAPT is supplied with power via the junction box.
For more information about various wiring and room solutions, see the Technical Section.
Supply voltage
A
B
24 V AC ±10 %
3 VA
Cable rating
0,6 A
Ambient temperature
0 °C - +50 °C
Forms of delivery
• Some of the ADAPT-products are available from stock
with standard settings.
• At delivery, a master air diffuser contains a complete air
diffuser with commissioning box, junction box CONNECT
Adapt and 5 metre long RJ45 cable LINK Adapt.
• Delivery of a slave air diffuser contains a complete air diffuser with commissioning box and 5 metre long RJ45
Standard settings
Temperatures (°C)
Figure 3. ADAPT Extract, installation.
Commissioning
• Normally, the ADAPT air terminals are preset from the
factory based on design values.
• The TUNE Adapt hand-held terminal is used for manually checking the current air flow through the air diffuser, and for changing set points, if required.
• For more information, see the installation - Commissioning - Maintenance instruction as well as the TUNE
Adapt user manual.
22
±1K
Absence
22
+3 / -2 K
Night-time cooling
18
Morning heat
25
Airflows (l/s)
Absence
Min.
airflow
Max.
airflow
The smallest size
0/5
10
60
The largest size
0/10
15
90
Air quality (ppm)
Min.
Max.
800
1000
CO2
Presence
Materials and finish
• ADAPT air terminals are made of galvanized sheet steel,
with parts made of plastic, rubber and also contain
electronic components.
• The ADAPT air terminals are powder coated in Swegon’s white interior standard colour RAL 9010, both on
the inside and on the outside.
• The sensor module and junction box are made of ABS
plastic.
• The commissioning box is made of galvanized sheet
steel with internal insulation.
Swegon reserves the right to alter specifications.
Presence
Switch on delay
Switch out delay
0 sec.
20 min.
Communication Modbus RTU by RS-485
Modbus ID
Speed
1
38,400 bps
Bit length
8 bits
Stop bits
1 bit
Parity
20130503
None
www.swegon.com
3
ADAPT Extract
Max. power consumption
WISE
Sizing
Engineering graphs
Air flow – Pressure drop – Sound level
• The diagrams should not be used for commissioning.
• The dB(C) value is normally 6-9 dB higher than the
dB(A) value.
• Sizing example – size 200:
– Given airflow 10-50 l/s at Pt 50 Pa.
– Max. sound level 28 dB(A)
Sound data
ADAPT Extract 200
Size
1000
500
400
Mid-frequency (Octave band) Hz
63
125
250
500
1000
2000
pt Pa
40 dB(A)
300
4000
8000
200
-1
16
7
-2
-7
-17
-21
-19
250
4
15
8
-2
-7
-16
-23
-22
Tol. ±
2
2
2
2
2
2
2
2
35
200
m
ax
Sound power level, Lw (dB)
Table, Kok
m
in
• The specified sound levels dB(A) are applicable to
rooms with an equivalent sound absorption area of 10
m2 (4 dB room attenuation).
• For calculating the air stream propagation, air velocities
in the occupancy zone, or sound levels in rooms with
other dimensions, we refer to our ProAir Web calculation
program. ProAir Web is available at www.swegon.com.
30
25
100
20
50
40
30
20
Sound attenuation ∆L
Table ∆L
2
3
4
5
10
10
20
30
40
20
50
30
40
100
50
100
200
300
l/s
200
400 500 m3/h
Mid-frequency (Octave band) Hz
63
125
250
500
1000
2000
4000
8000
200
18
11
13
20
19
17
20
18
250
13
6
12
21
18
18
21
19
Tol. ±
2
2
2
2
2
2
2
2
ADAPT Extract 250
m
in
Size
10
pt Pa
40 dB(A)
1000
35
500
400
30
m
ax
25
300
20
200
100
50
40
30
20
3
4
5
10
20
4
Swegon reserves the right to alter specifications.
20130503
30
40
20
50
30
100
40
50
100
200
300
400 500
200 l/s 300
m3/h
www.swegon.com
WISE
Dimensions and weights
Ordering key
ADAPT Extract
Product
Dimensions (mm)
Size
Circular active air diffuser for ceiling
A
B
C
ØD
Ød
E
200
456
504
332
199
250
345
Connection dimensions:
250
568
622
388
249
315
425
M: Master, S: Slave
F
G
H
I
ØJ
K
240
216
465
55
350
115
8,2
250
300 267
ØJ = Cutting hole size
CL = Center line
575
55
450
140
12,4
200
c
-bbb
-c
Version:
N.B.! Specify absence, min./max. airflows in your specification!
Dimensions (mm)
Weight
(kg)
Size
ADAPT E
Standard range:
Size: 200, 250
Accessories
DETECT Quality Temperature and CO2sensor with set point
selector knob
Figure 4. ADAPT Extract, dimension figure.
Swegon reserves the right to alter specifications.
Hand-held terminal for reading/changing
settings
TUNE Temp
Temperature adjuster
LINK Modbus
RJ12-cable for connecting up Modbus RTU
LINK Adapt
RJ45 cable for connecting up in other lengths
SPLIT Link
Split connector
FIX Link
For securing cords to ducts, etc.
POWER Adapt
Transformer
ACTUATOR
Valve actuator, on/off
VALVE
Radiator valve
ADAPT Relay
Relay for light or heat control
ADAPT TR
Semi-conductor relay for lighting or heat
control
CABLE Ext
Extension cable between box and air diffuser
LINK Wa
Network cable for Modbus, complies with the
EIA-485 standard
Each accessory is described in more detail in a separate
product sheet available at www.swegon.se.
20130503
www.swegon.com
5
ADAPT Extract
C
TUNE Adapt
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement