Task Force Tips model # FQ125F QuadraFog selectable gallonage nozzle shall be supplied. The
nozzle shall be provided in a tip only configuration. The nozzle shall be capable of producing a
variety of stream patterns from a straight stream to a narrow fog or extremely wide fog. For
corrosion resistance the nozzle shall be constructed from hardcoat anodized aluminum. The
nozzle shall be configured for flow settings of 30, 60, 95 and 125 GPM at 100 PSI, have a 1-1/2"
female NH rigid inlet and have a twist off position for break and extend operations.
The nozzle shall be designed to accept the TFT FoamJet, FJ-LX-FQ low expansion or FJ-MXFQ multi-expansion aspirating attachments. The nozzle shall have reflective labeling, fixed teeth,
protective front bumper, laser engraved serial number and a five year warranty.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF