Blaupunkt BRISBANE 230 Technical data

Blaupunkt BRISBANE 230 Technical data
BLAUPU NKT
CAR RADIO
BARCELONA 230
BRISBANE 230
Bedienungs- und Einbauanleitung
Operating and installation instructions
Mode d'emploi et de montage
lnstrucciones de manejo e instalacion
lnstru~oes de servi~o e de montagem
Petunjuk Pengoperasian dan Pemasangan
1 0 11 40 2 211 00 1
1 011 402 201 001
Controls
G)
[Vbutton
Unlock the detachable control panel
0
MENU button
Short press: Call up/close menu
Long press: Start scan function
® On/Off button
Short press: Switch on car sound system
In operation: Mute car sound system (Mute)
Long press: Switch off car sound system
In the menu: Change menu level
In Fast-Browse mode: Confirm selection
0
Volume control
In the menu: Select menu item, change
setting
In Fast-Browse mode: Category (iPod only),
select folder and track
® CD tray (Barcelona 230 only)
®
Display
0
A/Vbutton
In the menu: Select menu item, change
setting
Radio mode: Start seek tuning
MP3/WMA/iPod mode: Change to next/
previous folder
®
~ button (Eject) (Barcelona 230 only)
Eject a CD
® Microphone
@)
@
USB socket
Front AUX-IN socket
@ ,-button
Short press: Answering a call, speed dial
Long press: Open the phone book of the cell
phone or activate voice dialing
@
@
@
Keys 1-5
Infrared receiver
SRC button
Select memory bank or audio source
@ DIS button
Short press: Switch display
Long press: Switch display brightness
@
SD card slot
Access only with detached control panel
<I> button
In the menu: Change menu level
Radio mode: Adjust the stations
Other operating modes: Track selection
31
Contents
Safety notes .................................................... 33
Symbols used ............................................................ 33
Road safety ................................................................33
General safety notes ............................................... 33
Declaration of conformity ....................................34
Cleaning notes ................................................ 34
Disposal notes................................................. 34
Scope of delivery ............................................ 34
Optional equipment
(not part of the scope of delivery) ..................... 34
Placing the device in operation ..................... 34
Important note for radio reception
in the US and Asia .................................................... 34
Attaching/detaching the control panel .......... 34
Switching on/off ...................................................... 35
Volume ........................................................................35
Display brightness ................................................... 35
Switching demo mode on/off.............................36
Traffic information .......................................... 36
Radio mode ..................................................... 36
RDS ................................................................................36
Changing to radio mode or selecting
a memory bank ........................................................ 36
Tuning into a station .............................................. 37
Storing stations or calling stored stations ...... 37
Scanning stations .................................................... 37
Storing stations automatically (Travelstore) .. 37
PTY ................................................................................ 38
Switching display..................................................... 38
CD/MP3/WMA/iPod mode .............................. 39
Basic information ..................................................... 39
Changing to CD/MP3/WMA/iPod mode ......... 39
Inserting/ejecting a CD (Barcelona 230 only) ...40
Connecting/removing a USB data carrier. .... ..40
Inserting/removing the memory card .............40
Selecting tracks ........................................................41
Selecting a folder
(only in MP3/WMA/iPod mode) .........................41
Fast searching ...........................................................41
Interrupting playback ............................................41
32
Scanning all tracks ..................................................41
Playing tracks in random order ..........................41
Repeatedly playing individual tracks or
directories ..................................................................41
Switching display.....................................................42
Browse mode ............................................................42
Pandora • mode ............................................... 44
Requirements ...........................................................44
Connecting the iPod/iPhone device ................44
Starting the Pandora® mode ...............................44
Searching stations ................................................... 44
Shuffle mode .............................................................45
Skipping tracks ........................................................45
Interrupting playback ............................................ 45
Thumbs feedback .................................................... 45
Bluetooth® ....................................................... 45
The Bluetooth® menu ............................................46
Pairing and connecting a Bluetooth® device ...46
Telephone functions ............................................... 47
Bluetooth® streaming mode................................ 50
Additional functions in the Bluetooth® menu .. 50
External audio sources ................................... 52
Front AUX-IN socket... ............................................. 52
Sound settings ................................................ 52
Calling and exiting the "AUDIO" menu ............ 52
Making settings in the "AUDIO" menu ............. 53
User settings ................................................... 54
Calling the user menu and selecting a menu ... 54
Making settings in the "TUNER" menu ............ 54
Making settings in the "DISPLAY" menu ......... 55
Making settings in the "VOLUME" menu ........ 56
Making settings in the "CLOCK" menu ............ 57
Making settings in the "VARIOUS" menu ........ 57
Factory settings .............................................. 58
Useful information ......................................... 58
Warranty .....................................................................58
Service .........................................................................59
Technical data ................................................. 59
Installation instructions .............................. 179
Safety notes
Safety notes
Road safety
The car sound system was manufactured according to the state of the art and established safety
guidelines. Even so, dangers may occur if you do
not observe the safety notes in these instructions.
Observe the following notes about road safety:
These instructions contain important information to easily and safely install and operate the car
sound system.
• Read these instructions carefully and completely before using the car sound system.
• Keep the instructions at a location so that they
are always accessible to all users.
• Always pass on the car sound system to third
parties together with these instructions.
In addition, observe the instructions of the devices
used in conjunction with this car sound system.
Symbols used
These instructions employ the following symbols:
A!
DANGER!
~ Warns about injuries
A'\
CAUTION!
' ., Warns about damaging the CD drive
DANGER!
Warns about high volume
CE:
The CE mark confirms the compliance
with EU directives.
_.. Identifies a sequencing step
• Identifies a listing
• Use your device in such a way that you can
always safely control your vehicle. In case of
doubt, stop at a suitable location and operate
your device while the vehicle is standing.
• Remove or attach the control panel only
while the vehicle is standing.
• Always listen at a moderate volume to protect your hearing and to be able to hear acoustic warning signals (e. g. police sirens). During
mute phases (e.g. when changing the audio
source), changing the volume is not audible.
Do not increase the volume during this mute
phase.
General safety notes
Observe the following notes to protect yourself
against injuries:
• Do not modify or open the device. The device
contains a Class 1 laser that can cause injuries
to your eyes (Barcelona 230 only).
• Do not increase the volume during mute
phases, e. g. when changing the audio source.
Changing the volume is not audible during a
mute phase.
Use as directed
This car sound system is intended for installation
and operation in a vehicle with 12 V vehicle system voltage and must be installed in a DIN slot.
Observe the performance limits in the technical
data. Repairs and installation, if necessary, should
be performed by a specialist.
Installation instructions
You may only install the car sound system yourself if you are experienced in installing car sound
systems and are very familiar with the electrical
system of the vehicle. For this purpose, observe
the installation instructions at the end of these
instructions.
33
Safety notes ICleaning notes I Disposal notes IScope of delivery IPlacing the device in operation
Declaration of conformity
Optional equipment
(not part of the scope of delivery)
The Blaupunkt Europe GmbH declares that the car
sound systems Barcelona 230 and Brisbane 230
comply with the basic requirements and the other
relevant regulations of the directives 2004/1 08/EC
and 1999/5/EC.
Use only accessories approved by Blaupunkt.
Information is available from your Blaupunkt
specialised dealer or on the Internet under
www.blaupunkt.com.
The declaration of conformity can be found on the
Internet under www.blaupunkt.com.
Placing the device in operation
Cleaning notes
Attention
Solvents, cleaning and scouring agents as well as
dashboard spray and plastics care product may
contain ingredients that will damage the surface
of the car sound system.
Transport securing screws
(Barcelona 230 only)
• Use only a dry or slightly moistened cloth for
cleaning the car sound system.
• If necessary, clean the contacts of the control
panel regularly using a soft cloth moistened
with cleaning alcohol.
Disposal notes
)I' Do not dispose of your old unit in the household trash!
Use the return and collection systems available to
dispose of the old device.
Scope of delivery
The scope of delivery includes:
1 Car sound system
Operating/installation instructions
Before the startup of the car sound system, ensure
that the transport securing screws are removed
(see the chapter "Installation instructions").
Important note for radio reception in
the US and Asia
This car sound system is designed for operation in
different regions with different frequency ranges
and station technologies. The factory default of
the reception area is "EUROPE". If you operate the
car sound system outside of Europe, e.g. in the US
or Asia, you first have to set a suitable reception
area in the menu. Available reception areas are
"EUROPE': "ASIA': "USA': "$-AMERICA" and "THAILAND".
The reception area for the radio reception is set
in the user menu (see the chapter "User settings':
section "Making settings in the "TUNER" menu':
menu item "AREA").
Case for the control panel
Support frame
1 Antenna connection adapter
2 Disassembly tools
Handheld remote control (incl. battery)
Connecting cable chamber A
Connecting cable chamber B
34
Attaching/detaching the control
panel
The car sound system is equipped with a detachable control panel (release panel) to protect your
equipment against theft. In the delivery state,
the control panel is in the supplied case. To start
operating the radio after installation, you must
first attach the control panel (see the section
"Attaching the control panel" in this chapter).
Placing the device in operation
Always take the control panel with you when leaving the vehicle. The car sound system is worthless
to a thief without this control panel.
Caution
Damage to the control panel
Never drop the control panel.
The car sound system switches off.
Note:
If you switch on the car sound system while
the vehicle ignition is switched off, it automatically switches off after 1 hour to preserve
the vehicle battery.
Do not expose the control panel to direct sunlight
or another heat source.
Switching on/off via vehicle ignition
The car sound system will switch off/on simultaneously with the ignition if the device is correctly
connected to the vehicle's ignition as shown in the
installation instructions and you did not switch
the device off by pressing the On/Off button ® .
Avoid direct skin contact with the control panel's
electrical contacts.
Volume
Transport the control panel so that it is protected
against impacts and the contacts cannot become
dirty.
Attaching the control panel
-.. Push the control panel into the bracket at the
right edge of the device.
-.. Push the control panel carefully into the left
bracket until it clicks into place.
Removing the control panel
-.. Press the [V button CD to unlock the control
panel.
The left side of the control panel detaches
from the device and is secured by the bracket
against falling out.
-.. Move the control panel slightly to the left
until it disengages from the right bracket.
-.. Carefully remove the control panel from the
left bracket.
Note:
The car sound system automatically switches
off as soon as the control panel is removed.
Switching on/off
Switching on/off with the On/Off button
-.. For switch-on, press the On/Off button G).
The car sound system switches on.
-.. To switch off the device, press and hold down
the On/Off button ® for longer than 2 seconds.
Adjusting the volume
You can adjust the volume in steps from 0 (off) to
50 (maximum).
..- Turn the volume control G) to change the
volume.
Note:
If a telephone is connected with the car sound
system as described in the installation instructions, the car sound system is muted in case
of a phone call. During muting, the display
shows "TELEPHONE".
Muting the car sound system (Mute)
-.. Briefly press the On/Off button ® to mute
the car sound system or to reactivate the previous volume.
During muting, the display shows "MUTE".
Display brightness
You can manually switch the display brightness
between daytime mode and night-time mode or
switch automatically with the driving lights of the
vehicle.
Notes:
• The manual or automatic switching of the
display brightness is selected in the user
menu (see the chapter "User settings'~
section "Making settings in the "DISPLAY"
menu", menu item "DIM MODE").
35
Placing the device in operation ITraffic information I Radio mode
• The display brightness can be adjusted
separately for day and night (see the chapter "User settings'~ section "Making settings in the "DISPLAY" menu'~ menu items
"DIM DAY" and "DIM NIGHT".
..- Press the DIS [email protected] for approx. 2 seconds
to manually switch the display brightness.
Switching demo mode on/off
The demo mode shows the functions of the car
sound system as scrolling text on the display. By
pressing any button, the demo mode is interrupted and you can operate the device.
The demo mode can be switched on and off in the
user menu (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu'~ menu
item "DEMO MODE").
Traffic information
In the reception area "EUROPE", an FM station can
identify traffic reports by means of an RDS signal.
If priority for traffic reports is switched on, a traffic report is automatically switched through, even
if the car sound system is currently not in radio
mode.
If priority is switched on, the display shows the
traffic jam symbol (~). "TRAFFIC" is displayed
during a switched-through traffic announcement.
The priority is activated and deactivated in the
user menu (see the chapter "User settings'~ section "Making settings in the "TUNER" menu", menu
item "TRAFFIC").
Notes:
• The volume is increased for the duration
of the switched-through traffic announcement. You can adjust the minimum volume
for traffic announcements (see the chapter
"User settings", section "Making settings
in the "VOLUME" menu'~ menu item "TA
VOLUME").
• To cancel a switched-through traffic announcement, press the SRC button @.
36
I
Radio mode
RDS
Many FM stations broadcast an RDS (Radio Data
System) signal in addition to their programme
in the reception area "EUROPE" that allows the
following additional functions:
• The station name is shown on the display.
• The car sound system recognises traffic announcements and news broadcasts and can
automatically switch them through in other
operating modes (e.g. in USB mode).
• Alternate frequency: If RDS is activated, the car
sound system automatically selects the best
receivable frequency for the station that is currently set.
• Regional: At certain times, some radio stations divide their programme into regional
programmes providing different content. If
the REGIONAL function is activated, the car
sound system changes only to those alternate
frequencies on which the same regional programme is being broadcast.
The functions RDS and REGIONAL are activated
and deactivated in the user menu (see the chapter "User settings'~ section "Making settings in
the "TUNER" menu'~ menu items "RDS AF" and
"REGIONAL").
Changing to radio mode or selecting
a memory bank
..- Press the SRC [email protected] repeatedly until the
desired memory bank is displayed:
FM1 ~ FM2~ FMT~ AM~ AMT
Notes:
• Up to 5 stations can be stored in each
memory bank.
• Memory banks can be activated or deactivated via the user menu (see the chapter
"User settings", section "Making settings in
the "TUNER" menu'~ menu item "BANDS"
(band selection)). Deactivated memory
banks are skipped during the source selection with the SRC button @.
Radio mode
Tuning into a station
Scanning stations
There are various ways of tuning into a station:
With the scan function, you can scan either every
receivable station or the stored stations of the current waveband .
Tuning into stations manually
...- Briefly press the
button 0 once or
several times to change the frequency in increments, or long to quickly change the frequency.
<I>
Starting station seek tuning
...- Briefly press the VI A button
tion seek tuning.
0
to start sta-
The radio tunes into the next receivable
station.
Notes:
• For the reception area "EUROPE": In the FM
waveband, only traffic information stations
are tuned into if the priority for traffic information (~) is switched on.
• For the reception areas "EUROPE" and
"USA": In the FM waveband, the next
station with the currently selected programme type is tuned into if the PTY function is activated (see the chapter "PTY").
• The sensitivity of seek tuning can be adjusted (see the chapter "User settings':
section "Making settings in the "TUNER"
menu': menu item "SEEK SENS").
Storing stations or calling stored
stations
...- Select the desired memory bank.
...- If necessary, set the desired station.
...- Press the station button 1 - 5 @ for approx.
2 seconds to store the current station under
the button.
-or...- Briefly press the station button 1 - 5 @ to call
up the stored station.
Note:
You can adjust the scan time for each station (see the chapter "User settings': section
"Making settings in the "VARIOUS" menu':
menu item "SCAN TIME").
Scanning receivable stations
...- Press the MENU button 0 for approx. 2 seconds to start scanning.
During the scan, the display alternately displays "SCAN" and the current frequency as
well as memory bank or station name.
...- Briefly press the MENU button 0 to continue listening to the station that is currently
being received.
Scanning stored stations
...- Press the VI A button 0 for approx. 2 seconds to start scanning.
During the scan, the display shows the memory location and the current frequency or station name.
0
...- Briefly press the VI A button
to continue
listening to the station that is currently being
scanned.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search
for and store the 5 stations offering the strongest
reception in the region in the FM and AM wavebands. The stations are stored in the FMT or AMT
memory bank. Any previously stored stations in
this memory bank are deleted in the process.
...- Select a memory bank of the desired waveband, e. g. FM 1 or AM .
...- Press the SRC button @ for approx. 2 seconds.
37
Radio mode
The tuner starts the automatic station seek
tuning; the display shows "FM TSTORE" or
"AM TSTORE". After the storing is completed,
the radio plays the station at memory location
1 of the FMT or AMT level.
Notes:
• For the reception area "EUROPE": If the
priority for traffic information is switched
on (~), only traffic information stations
are stored.
• If the FMT or AMT memory bank is deactivated (see the chapter "User settings'~
section "Making settings in the "TUNER"
menu': menu item "BANDS"), it is automatically reactivated if you initiate the
Travelstore function.
PTY
In the reception areas "EUROPE" and "USA", an
FM station can transmit its current programme
type, e.g. CULTURE, POP, JAZZ, ROCK, SPORT or
SCIENCE. Hence, the PTY function allows a targeted search for broadcasts of a certain programme
type, e. g. for rock or sports broadcasts. Note that
PTY is not supported by all stations.
Note:
The PTY function is only available if it has been
activated (see the chapter "User settings", section "Making settings in the "TUNER" menu",
menu item "PTY").
Selecting a programme type
To select a programme type read the section
"Making settings in the "TUNER" menu'~ menu
item "PTYTYPE" in the chapter "User settings".
Note:
You can set the language in which the programme types should be displayed (see the
chapter "User settings'~ section "Making settings in the "TUNER" menu': menu item "PTY
LANG").
38
Searching for stations
...- Press the VI A button (!).
During the seek tuning, the currently selected
programme type is shown on the display.
As soon as a station with the desired programme type is found, it remains being tuned
into.
Notes:
• If no station with the selected programme
type is found, "PTY NONE" is briefly displayed and 2 beeps can be heard. The
radio will then retune to the station that it
played last.
• If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a
later point in time, the car sound system
will automatically switch from the currently tuned station or from the current
audio source (e. g. CD) to the station whose
programme type matches the one you selected. Note that this function is not supported by all stations.
Switching display
...- Press the DIS button
these displays:
itf~;-:~"''
!;; ~" ~
~
-' ~~~...
•
ABCDEF
>
~
._,,
@) to toggle between
"":. ,..,·,>--
-.
r~:z~~
,
-",;:r
Station name
FM1 102.90 Memory bank/frequency
or
or
P1 102.90 Memory location/frequency
FM1
or
P1
18:30 Memory bank/time
or
18:30 Memory location/time
CD/MP3/WMA/iPod mode
CD/MP3/WMA/iPod mode
Basic information
CD/MP3/WMA mode
Barcelona 230:
This car sound system can be used to play back audio COs (CODA) and CD-R/RWs with audio, MP3 or
WMA files as well as MP3 or WMA files on USB data
carriers and SD(HC)/MMC memory cards.
Brisbane 230:
This car sound system can be used to play MP3 or
WMA files on USB data carriers and SD(HC)/MMC
memory cards.
Notes:
• To ensure proper functioning, use only COs
with the Compact-Disc logo.
• Blaupunkt cannot guarantee the flawless
function of copy-protected COs and all
CD blanks, USB data carriers and memory
cards available on the market.
Note the following information when preparing
an MP3/WMA data carrier:
• Naming of tracks and directories:
- Max. 32 characters without the file extension ".mp3" or ".wma" (the use of more
characters reduces the number of tracks
and folders that the car sound system can
recognise)
- No umlauts or special characters
• CD formats: CD-R/RW, 0: 12 em
• CD data formats: ISO 9669 Levell and 2, Joliet
• CD burn speed: Max. 16x (recommended)
• USB format/file system: Mass storage device I
FAT16/32
• Memory card file system: FAT16/32
• File extension of audio files:
- .MP3 for MP3 files
- .WMA for WMA files
• WMA files only without Digital Rights Management (DRM) and created with Windows Media
Player version 8 or later
• MP3 103 tags: Version 1 and 2
• Bitrate for creating audio files:
- MP3: 32 to 320 kbps
- WMA: 32 to 192 kbps
• Maximum number of files and directories: Up
to 20,000 entries depending on the data structure
iPodmode
You can connect numerous iPod and iPhone
models to the car sound system via the USB port
and control the audio playback from the car sound
system.
Note:
A list of compatible iPod and iPhone models
is located at the end of these instructions.
Blaupunkt cannot guarantee the flawless
function of other iPod and iPhone models.
Use a suitable adapter cable to connect your iPod
or iPhone with the USB port of the car sound
system.
Changing to CD/MP3/WMA/iPod
mode
..- Press the SRC [email protected] repeatedly until the
desired audio source is displayed:
• "CD" (Barcelona 230 only): Inserted CD
• "SD(HC)": Inserted memory card
• "USB": Connected USB data carrier
• "I POD" I "IPHONE": Connected iPod I iPhone
• "AUX": Connected external audio source
Notes:
• The respective audio source can be selected only if a corresponding CD is inserted or
a corresponding device is connected.
• A connected iPod is initially selected under "USB" and as soon as the iPod has been
recognised under "I POD".
• If the car sound system first has to read
the data of a connected device or data carrier before the playback, the display shows
"READING". The duration of the reading
depends on the data volume and design of
I
39
CD/MP3/WMA/iPod mode
the device or data carrier. If the device or
data carrier is defective or the transferred
data cannot be played back, a corresponding message appears on the display (e.g.
"USB ERROR").
Inserting/ejecting a CD
(Barcelona 230 only)
Inserting a CD
~
A
Risk of severe damage to the CD
drive!
'
'
Noncircular contoured CDs (shape CDs)
and CDs with a diameter ·of 8 em (mini CDs) must
not be used.
We accept no responsibility for any damage to the
CD drive that may occur as a result of the use of
unsuitable CDs.
Note:
You must not hinder or assist the drive as it
automatically draws in the CD.
..- Insert the CD with its printed side up into the
until you feel a slight resistance.
CD tray
0
The drive automatically draws in the CD and
checks its data. Afterwards, the playback
starts in CD or MP3 mode.
Note:
If the inserted CD cannot be played back, "CD
ERROR" is briefly displayed and the CD is automatically ejected after approx. 2 seconds.
Ejecting a CD
Note:
You must not hinder or assist the drive as it
ejects the CD.
..- Press the ~ button
CD.
® to eject an inserted
Notes:
• If a CD is ejected and not removed, the
drive will automatically draw it back in
·
again after approx. 10 seconds.
4o
1
• You can also eject CDs while the car sound
system is switched off or whilst another audio source is activated.
Connecting/removing a USB data
carrier
Connecting a USB data carrier
..- Switch off the car sound system so that the
data carrier will be correctly registered .
..- Pull the protective cap of the USB socket @
to the front until it moves out of the socket
and fold it down.
..- Connect the USB data carrier.
..- Turn on the car sound system.
If the USB data carrier is initially selected as
audio source, the data are read first.
Notes:
• If the connected USB data carrier cannot
be seen, "USB ERROR" is briefly displayed.
• The time required for reading in the data
depends on the design and size of the USB
data carrier.
Removing a USB data carrier
..- Switch off the car sound system so that the
data carrier will be correctly unregistered.
..- Disconnect the USB data carrier.
..- Close the protective cap of the USB socket @ .
Inserting/removing the memory card
Inserting the memory card
..- Detach the control panel.
..- Insert the memory card with its labelled side
up and its contacts first into the card slot @
until it clicks into place.
..- Attach the control panel.
After switch-on, the device automatically
selects the inserted memory card as audio
source. The data of the memory card are being read. Afterwards, the playback starts in
MP3 mode.
CD/MP3/WMA/iPod mode
Notes:
• If the inserted memory card cannot be
played, "SO ERROR" is briefly displayed.
• The time required for reading the card
depends on the design and size of the
memory card.
Removing the memory card
-.. Detach the control panel.
...- Push on the memory card until it disengages.
-.. Pull the memory card out of the card slot @ .
Scanning all tracks
The scan function scans all available tracks.
0
-.. Press the MENU button
for approx. 2 seconds to start the scan, or briefly to continue
playing the currently scanned track.
Note:
The scan time can be adjusted (see the chapter "User settings'~ section "Making settings
in the "VARIOUS" menu'~ menu item "SCAN
TIME").
-.. Attach the control panel.
Playing tracks in random order
Selecting tracks
-.. Press the 4 MIX button @)to change among
the playback modes:
<I>
0
-.. Press the
button
briefly to change
to the previous/next track.
Note:
If the current track plays longer than 3 seconds, pressing
once restarts the track.
CD*/
iPod
<0
MP3/
WMA
Selecting a folder
(only in MP3/WMA/iPod mode)
0
-.. Press the VI A button
briefly to change
to the previous/next folder.
Note:
In iPod mode, this allows you to change to the
previous/next folder of the current category,
e. g. to the next genre, if you previously selected a track on the iPod via the corresponding genre.
Fast searching
<I>
0
-.. Press and hold down the
button
until the desired position has been reached.
Interrupting playback
-.. Press the 2 • button @) to interrupt the
playback ("PAUSE") or to continue it.
Gen.
MIX ALL
Mixing tracks
MIX DIR
Mixing tracks of
the current folder
MIX ALL
Mixing tracks of
the data carrier
MIX OFF
Regular playback
* Barcelona 230 only
If the MIX function is switched on, the icon
MIX (mix all tracks) or MIX ilt (mix tracks of
current folder) is shown on the display.
Repeatedly playing individual tracks
or directories
-.. Press the 3 RPT button @)to change among
the playback modes:
CD*/
iPod
RPTTRACK Repeating tracks
RPTTRACK Repeating tracks
MP3/
WMA
RPTDIR
Repeating
folders
Gen.
RPTOFF
Regular playback
* Barcelona 230 only
I
41
CD/MP3/WMA/iPod mode
If the RPT function is switched on, the icon
'+3 JJ (repeat tracks) or '+3 - (repeat
folders) is shown on the display.
Switching display
...- Press the DIS button @) once or several times
to switch among these displays:
Browse mode
In Browse mode, you can directly search for and
select a certain track on the MP3/WMA data carrier
or iPod without interrupting the current playback.
Browse mode in MP3/WMA mode
In MP3/WMA mode, you can select and play a
track from a directory of the data carrier.
...- Press the 1 )f> button @ to call up the browse
mode in the MP31WMA mode.
CD*
MP31
WMAI
iPod
T01 00:15
Track number
and playi time
T01 03:37
Track number
and duration
T01 18:30
Track number
and time
FILE
File name
FOLDER
Folder name
SONG
Track name
ARTIST
Artist
ALBUM
Album name
GENRE
Genre
PLAY 00:15
Playing time
TOTAL03:37
Track duration
CLOCK18:30
Time
ALL INFO
All information
as scrolling text
2
2
...- Press the <button
of the data carrier.
(j) to display the folders
0
1
1
3
Track name, artist and album name must be
stored as 103 tag to be able to display them.
2
The file and folder name is displayed only in
MP31WMA mode.
3
The genre information is available only on
iPod mode.
42
Note:
You can exit the browse mode at any time by
pressing the 1 )f> button @ .
The current folder is shown on the display.
1
* Barcelona 230 only
1
The;> icon flashes on the display. In addition,
the icon JJ (track) or icon • (folder) appears.
once or several
...- Press the VI A button
to select a
pressed
times or hold the button
different folder.
...- Press the> button (j) to display the tracks of
the selected folder.
The first track of the folder is shown on the
display.
Note:
Pressing the <button
folder list.
(j_) returns you to the
...- Press the VI A button (j) once or several
times or hold the button pressed to select a
different track.
...- Press the > button (j) to play the track.
The playback starts. You are exiting the
browse mode.
CD/MP3/WMA/iPod mode
Browse mode in iPod mode
In iPod mode, you can select and play back the
tracks via the categories "ARTISTS", "ALBUMS",
"GENRES", "PLAYLISTS" or "AUD-BOOKS" (audio
books).
...- Press the 1 )t> button @ to call up the Browse
mode in the iPod mode.
The jfJ icon flashes on the display. In addition, the lit icon (categories) or the ~ icon
(track) appears. The first category, "ARTISTS",
is displayed.
Notes:
• Press the 1 )t> button @ for approx. 2 seconds to directly call up the "PLAYLISTS"
category.
• You can exit the browse mode at any time
by pressing the 1 )t> button @ .
...- Press the VI A button 0 once or several
times to select a different category.
...- Press the> button (j) to display the available
folders of the category.
The first folder of the selected category is
shown on the display (e.g. "JAZZ" in the
"GENRES" category).
Note:
Pressing the button
list of categories.
<
0
returns you to the
0
once or several
...- Press the VI A button
times or hold the button pressed to select a
different folder.
0
...- Press the> button
tracks of the folder.
to display the available
0
once or several
...- Press the VI A button
times or hold the button pressed to select a
different track.
...- Press the> button (f) to play back the track.
The playback starts. You are exiting the
browse mode.
Fast browsing
Fast browsing enables faster access to tracks. Instead of the arrow keys (i) , you use the volume
and the On/Off button G) to select
control
and confirm list entries:
0
Selecting
entries in lists
Confirming
entries
Return to the
higher level
V/A 0
Volume
control (~)
> 0
On/off
button
<0
Select and
confirm
ion"<<<"
Fast browsing is switched on or off in the user
menu (see the chapter "User settings'~ section
"Making settings in the "VARIOUS" menu': menu
item "BROWSE").
Note:
With activated fast browsing, you cannot
change the volume in browse mode or mute
the car sound system. To do so, first exit the
browse mode by pressing the button 1 )t> @
or starting the track playback .
The first track of the folder is shown on the
display.
Note:
Pressing the button
list of folders.
<
0
returns you to the
43
Pandora ®mode
Pandora® mode
Starting the Pandora® mode
Requirements
..- Open the Pandora ®application on your iPodl
iPhone device.
Control for Pandora®requires:
• An iPhone device with a reliable data connection, or an iPod touch that is connected to wireless internet.
..- Press the SRC button @ repeatedly until
"PANDORA" is displayed.
Searching stations
• The Pandora ®app installed on the iPhoneliPod
device.
You can display your station list and select stations
directly from the car sound system.
• An active account with Pandora®. Sign up at
www.pandora.com.
..- Press the 1 fo button
tions menu.
• The USB sync cable that came with your iPodl
iPhone device.
..- Press the VI A button
once or several
times to select "A-Z" (the station names are
listed alphabetically) or "BY DATE" (the station
names are listed by date).
Notes:
• Pandora ®is available only in the US.
• Refer to www.pandora.comleverywherel
mobile for devices compatible with the
Pandora®mobile application.
• Pandora ®is an internet service, carrier and
data charges may apply.
• Some Pandora ® functionality cannot be
operated from this car sound system.
• For issues using the Pandora®application,
please contact Pandora at pandora-support
@pandora.com
Connecting the iPod/iPhone device
..- Pull the protective cap of the USB socket ~0
to the front until it moves out of the socket,
and fold it down.
..- Connect the iPodliPhone device, using the
USB sync cable included with your iPodl
iPhone device.
3:V to display the sta-
1
CD
..- Press the> button (i) to display the selected
station list.
..- Press the VI A button tf-.'
. _! ) once or several
times or hold the button pressed to cycle
through the list of stations.
..- Press the> button (!) when the desired station is highlighted.
The playback will begin.
Notes:
• Stations must be created in your account
prior to connecting your iPodliPhone device to the car sound system.
• With activated fast browsing, you can use
the volume control
and the On/Off
button (:£) instead of the arrow keys
to
select and confirm list entries. This process
does not allow changing the volume or
muting the car sound system.
0
0
• You can exit the stations menu at any time
by pressing the 1 fo button (~.
44
Pandora® mode I Bluetooth®
Shuffle mode
...- Press the 1 fl button @) to
Bluetooth®
display the sta-
tions menu.
...- Press the VI A button (j_) once or several
times to select "SHUFFLE" from the stations
menu.
>
...- Press the button
all of your stations.
(j) to shuffle songs from
Skipping tracks
>
...- Press the button
next track.
(j)
briefly to skip to the
Notes:
• The operation to replay a previous track is
not available.
• Pandora® limits the number of skips allowed for their service.
Interrupting playback
...- Press the 2 U~ button @
to interrupt the
playback ("PAUSE") or to continue it.
Thumbs feedback
Thumbs up
...- Press the A button (j__) to tell Pandora® that
you like the current track.
The. icon appears on the display until the
next track. Pandora®will play more tracks with
similar qualities.
Thumbs down
...- Press the V button (j) to tell Pandora ®that
you do not like the current track.
The 9 icon appears on the display until the
next track. Pandora®will not play the current
track again, and will avoid playing tracks with
similar qualities.
You can connect the car sound system via Bluetooth ®with other Bluetooth®-ready devices, such
as cell phones. This allows you to use the car sound
system with its integrated microphone as handsfree system for connected cell phones and control
the audio output of other Bluetooth®devices and
play them back via the loudspeakers of the car
sound system (Biuetooth®streaming).
Note:
You can also connect an external microphone
for hands-free calling (see the chapter "Installation instructions").
Bluetooth®technology is a wireless connection of
short range. For this reason, Bluetooth® devices
must be located near the car sound system (in the
vehicle) to establish and maintain a connection.
To establish a Bluetooth®connection, you must
first pair the car sound system and the Bluetooth®
device. When you pair the devices, a Bluetooth®
connection is subsequently established automatically. This connection remains in effect as long as
the Bluetooth®device is within range. If the connection is interrupted, e.g. because you moved
the cell phone outside the range, the connection
is automatically re-established as soon as you are
back within range .
Only one Bluetooth® device can be connected
with the car sound system. If you connect a new
device with the car sound system, the connection
to a currently connected device is automatically
interrupted. However, the car sound system leaves
up to 5 different Bluetooth ®devices paired, and
you can quickly and easily connect any of these
devices with the car sound system again.
45
Bluetooth®
The Bluetooth® menu
In the Bluetooth®menu, you find all the functions
for pairing, connecting and managing Bluetooth®
devices.
Calling the Bluetooth®menu
..- Briefly press the MENU button
the user menu.
0
to open
0
..- Turn the volume control
until the
"BLUETOOTH" menu item is selected.
..- Press the On/Off button 0) to open the Bluetooth®menu.
..- Turn the volume control
menu item is selected.
(4)
until the desired
..- Perform the setting (see the following sections).
..- Briefly press the MENU button
menu.
0
to exit the
Notes:
• The Bluetooth ®menu is automatically exited approx. 30 seconds after the last button activation and you are returned to the
display of the current audio source.
• In the menu, you can press the button
(!) in each case to return to the higher
menu level.
<
• If a Bluetooth® process is running (e.g.
re-establishing the connection to the last
connected device), the functions of the
Bluetooth® menu are blocked. If you attempt to open the Bluetooth® menu during this time, "LINK BUSY" briefly appears
on the display. If you want to cancel the
Bluetooth® process and open the Bluetooth®menu, press the 5 ..-:-button @.
Pairing and connecting a Bluetooth®
device
Notes:
• You can pair up to 5 Bluetooth® devices
with this car sound system. Before you can
pair another device, you must first unpair
one of the already paired devices (see the
chapter "Additional functions in the Bluetooth ® menu", section "Managing paired
devices"). If you should attempt to pair a
fifth Bluetooth®device, "PHONE LIST FULL
- PLEASE DELETE ENTRIES FROM LIST" is
displayed .
• If a connection with a Bluetooth® device
currently exists, this connection is automatically disconnected if you pair and
connect another device .
..- In the Bluetooth®menu, select the "PAIRING"
menu item.
..- Press the On/Off button G) to pair a Bluetooth® device.
The display shows "PRESS >TO CONFIRM".
..- Press the
>button (!).
The display shows "ENTER PIN" and the currently stored PIN (default "1234"). In addition, the Bluetooth® icon flashes. The car
sound system can now be recognised by a
Bluetooth® device for approx. 2 minutes and
connected.
*
..- Search the car sound system from your Bluetooth®device (Biuetooth ®name: "BP 230 BT'').
..- Establish the connection from your Bluetooth® device. Enter the PIN displayed by the
car sound system.
The display briefly shows "PAIRED': followed
by "CONNECTED", as soon as the car sound
system and the Bluetooth®device are paired
and connected.
Notes:
• If no connection can be established, the
display briefly shows "CONNECT FAILED".
46
Bluetoothcs
• If a Bluetooth® device is connected with
the car sound system, the display shows
the Bluetooth®icon
• If the device connected last cannot be
located after switching on the car sound
system, the car sound system attempts to
connect one of the other paired devices. If
none of the devices is located, the display
briefly shows "NO DEVICE".
*·
Telephone functions
Answering/rejecting an incoming phone call
With an incoming call, the display alternately shows
"CALL" and the number of the caller. The current
audio source is muted and a ring tone is played via
the loudspeakers of the car sound system.
Note:
If the number of the caller is not being transmitted, the display shows "PRIVATE" instead
of the number. If the number of the caller is
stored together with a name in the car sound
system, the name of the entry and the number are displayed.
..- Press the
r- button Ci:V to answer the call.
"CALL" and the duration of the ongoing call
are displayed.
..- Press the 5 ~button @ to reject the call or
to end the current call.
The display shows "CALL END".
Notes:
• During the call, you can adjust the volume
with the volume control (i) or mute the
device with a short press of the On/Off
button G).
• You can preset the hands-free volume
in the user menu (see the chapter "User
settings", section "Making settings in the
"VOLUME" menu", menu item "TEL VOL").
• If the car sound system is switched off with
active ignition, it automatically switches
on with an incoming call. This allows you to
make the call over the hands-free system.
After the call has ended, the car sound system automatically switches off again.
Making a call
..- In the Bluetooth®menu, select the "DIAL NEW
NUMBER" menu item.
..- Press the On/Off button
menu.
0
to open the entry
You can now enter a phone number with up
to 20 digits:
..- Turn the volume control 0
for the respective position.
to select a digit
..- Press the> or< button (jJ to reach the next
or previous position.
Notes:
• You can also reach the next position by
pressing the ON/Off button
CD.
• While entering the phone number, you
cannot change the volume or mute the car
sound system.
..- Press the
entered.
r- button @! to call the number
"CALLING" and the dialed number are alternately shown on the display.
As soon as your calling party answers the call,
the display shows "CALl:' and the time of the
current phone call.
Calling an entry in the phone book
Note:
This function is only available if the phone
book of the connected cell phone was transferred to the car sound system (see the chapter "Additional functions in the Bluetooth®
menu", section "Transferring the phone book
of the cell phone to the car sound system").
..- In the Bluetooth® menu,
"PHONEBOOK" menu item.
..- Press the On/Off button
phone book.
G)
select
the
to open the
The display shows the first phone book entry.
47
Bluetooth®
Note:
If the phone book has not yet been transferred, the display briefly shows "PHONEBOOK
NOT AVAILABLE".
-or..- In the Bluetooth® menu, select the
"PB SEARCH" (phone book search) menu item.
..- Press the On/Off button (~~J to open the entry
menu.
..- Turn the volume control G) to select the first
letter of the desired entry.
..- Press the On/Off button
selection.
G)
to confirm the
The display shows the first phone book entry
that starts with the selected letter.
Note:
If the phone book does not contain any entry
with the selected first letter, the display briefly
shows "NOT FOUND".
..- Turn the volume control
desired entry.
G) to
select the
..- Press the~ button '.§ to call the number.
"CALLING" and the dialled number are alternately shown on the display.
Note:
You can also call an entry in the phone book
via speed dial (see the section "Speed dial for
phone book entries" in this chapter).
Making a call with voice dial
Note:
This function is only available if the connected
cell phone supports voice dial.
..- In the Bluetooth ® menu, select the "VOICE
DIAL" menu item.
..- Press the On/Off button ~~ to activate voice
recognition.
The car sound system is muted and the display shows "SPEAK NOW".
..- Say the name of the desired calling partner.
48
Notes:
• If no Bluetooth ®connection is established
when voice recognition is activated, the
display briefly shows "VOICE DIAL FAILED
-NO BT CONNECTION".
• If the spoken name is not being recognised
or the time for the voice recognition has
already expired, the display briefly shows
"DIAL FAILED".
• You can cancel the voice recognition by
pressing the 5 ~button @.
• Please note that the duration of the voice
recognition is limited and depending on
the respective cell phone.
• You can also activate the voice recognition
via speed dial (see the section "Speed dial
for voice dial" in this chapter).
Storing a phone number in the car sound
system
You can store phone numbers in the car sound
system and make calls using the speed dial (see
the following section) .
A phone number is stored for the currently connected telephone and is available only for this telephone. The car sound system can store up to five
numbers for up to five paired devices.
..- Enter the phone number as described in the
section "Making a call".
..- Press the desired memory button 1 - 5 @ for
approx. 2 seconds to store only the number.
-or-
0
..- Press the> button
for approx. 2 seconds
to enter a name for the entry.
You can now enter a name with up to 15 characters:
..- Turn the volume control G) to select a character for the respective position.
..- Press the> or< button
or previous position.
0
to reach the next
Note:
You can also reach the next position by pressing the ON/Off button G).
Bluetooth®
memory button
desired
..- Press the
1 - 5 @) for approx. 2 seconds to store the
number and name.
The display briefly shows "NUMBER SAVED".
Afterwards, you are returned to the Bluetooth® menu and the "DIAL NEW NUMBER"
menu item.
Notes:
• A number previously stored on the memory button is replaced.
• If a telephone is unpaired, the numbers
stored for this telephone are automatically
deleted.
Speed dial for any phone number or for the
number dialed last or a stored number
With speed dial, you can make a call without first
having to select the corresponding function in the
Bluetooth ®menu.
Speed dial for phone book entries
Note:
This function is only available
if the phone book of the connected cell
phone was transferred to the car sound
system (see the chapter "Additional functions in the Bluetooth ® menu", section
"Transferring the phone book of the cell
phone to the car sound system").
if the speed dial is set for phone book entries (see the chapter "Additional functions
in the Bluetooth®menu'~ section "Setting
the button function for speed dial").
To select an entry of the phone book with the
speed dial and call it,
..- press the , . button G3) for approx. 2 seconds.
The display shows the first phone book entry
or the search function for phone book entries.
..- Turn the volume control (~) to select the
desired entry.
To call the number dialed last,
..- press the,. button @.
The display shows the number dialed last.
..- Press the,. button @ to call the number.
Note:
If no cell phone is currently connected, the
Bluetooth® menu is opened. The "PAIRING"
menu item is selected.
Speed dial for voice dial
..- Press the,. [email protected] to call the number.
To call a stored number,
..- press the,. button @ .
..- Press a memory button 1 - 5
stored number.
@
to call the
Note:
If no number is stored under the selected
memory button, the display briefly shows
"NO NUMBER".
..- Press the,. button @ to call the number.
To call any number,
..- press the , . button @ .
Note:
This function is only available
• if the connected cell phone supports voice
dial.
• if the speed dial is set for voice dial (see the
chapter "Additional functions in the Bluetooth®menu'~ section "Setting the button
function for speed dial").
To activate the voice recognition with the speed
dial,
..- press the , . button @ for approx. 2 seconds.
The car sound system is muted and the display shows "SPEAK NOW".
..- Say the name of the desired calling partner.
CD
to open the entry
..- Press the On/Off button
menu and enter a number (enter the phone
number as described in the section "Making
a call") .
..- Press the,. button @ to call the number.
49
Bluetooth®
Bluetooth® streaming mode
You can play back music from a Bluetooth®audio
device via the loudspeakers of the car sound system if the audio device supports the Bluetooth ®
profile A2DP (Advanced Audio Distribution Profile).
Starting Bluetooth® streaming
..- Press the SRC button @ repeatedly until the
display shows "BT-STREAM".
The playback starts.
Notes:
• The Bluetooth® streaming mode can be
selected only if a suitable audio device is
connected.
• If the connection to the streaming device is lost during playback, the display
briefly shows "DISCONNECTED" and the
car sound system changes to the previous
audio source.
Selecting tracks
..- Briefly press the
button
to the previous/next track.
<I>
(7) to change
Interrupting playback
..- Press the 2 button 1..,. @ button to interrupt
the playback ("PAUSE") or to continue it.
Additional functions in the
Bluetooth® menu
Changing the Bluetooth® PIN
The factory-set Bluetooth® PIN of the car sound
system is "1234"; e.g. it must be entered on the
cell phone when pairing a cell phone. This PIN can
be changed.
..- In the Bluetooth® menu, select the "PIN EDIT"
menu item .
..- Press the On/Off button ® to open the entry
menu.
You can now enter the PIN:
8) to select a digit
..- Turn the volume control
for the respective position .
<
..- Press the> or button (~) to reach the next
or previous position.
50
Notes:
• You can also reach the next position by
pressing the ON/Off button 0).
• While entering the PIN, you cannot change
the volume or mute the car sound system .
..- Press the > button (j__) repeatedly until you
reach past the last position to confirm the PIN
entered and return to the Bluetooth®menu.
Managing paired devices
The paired Bluetooth®devices can be managed in
the Bluetooth ®menu.
The device list shows the Bluetooth® names or
addresses of the paired devices. You can do the
following:
• Disconnecting the connection to the currently
connected Bluetooth®device
• Establishing a connection to one of the paired
Bluetooth®devices
• Unpairing Bluetooth®devices
..- In the Bluetooth ® menu, select the "PHONE
LIST" menu item .
..- Press the On/Off button ®
device list.
to open the
The first device on the list is displayed .
Note:
If no device is paired, "EMPTY LIST" is briefly
displayed.
..- Turn the volume control
ent device.
0
to select a differ-
You have the following options:
To connect the displayed device,
..- press the,. button @.
As soon as the device is connected, "CONNECTED" is briefly displayed and you are returned to the Bluetooth®menu.
Note:
If no connection can be established, the
display briefly shows "CONNECT FAILED". If
the device is already connected, the display
briefly shows "CONNECT EXIST".
Bluetooth"
To disconnect the connection to the displayed
device,
..- press the 5 ~ button G_
:V.
The display briefly shows "DISCONNECTED"
and you are returned to the Bluetooth®menu.
Note:
If the device was not connected, the display
briefly shows "NO CONNECTION ".
To unpair the displayed device,
..- press the 5 ~button @ for approx. 2 seconds.
The display briefly shows "DELETED" and you
are returned to the Bluetooth ®menu.
Note:
If a telephone is unpaired, the numbers stored
for this telephone and a phone book transferred from this cell phone are automatically
deleted.
Unpairing all Bluetooth® devices
All paired Bluetooth®devices can be unpaired in
the Bluetooth® menu.
..- In the Bluetooth® menu, select the "DELETE
ALL PAIRED DEVICES" menu item.
..- Press the On/Off button
G).
The display shows "PRESS > TO CONFIRM".
..- Press the
devices.
> button 0
to unpair all the
The display briefly shows "DELETED".
Note:
If no device is paired, "EMPTY LIST" is briefly
displayed.
Transferring the phone book of the cell phone
to the car sound system
You can transfer the phone book of the connected
cell phone to the car sound system to call entries
of the phone book using the car sound system.
Notes:
• The car sound system accepts only entries
from the memory of the telephone and
not from the SIM card inserted in the tel ephone.
• The transfer does not delete the phone
book from the cell phone.
The car sound system can store the phone books
of the paired telephones with a total of up to 1000
entries. If several numbers are stored on the telephone for one contact (e.g. landline, cell phone
number, office number and similar), each number
is stored as a separate entry by the car sound system.
Each entry consists of a name and a number, each
up to 20 characters on digits.
Note:
Do not switch off the car sound system while
transferring the phone book. If you do or if the
power supply of the car sound system should
be interrupted for any reason, you have to restart the transfer.
..- In the Bluetooth ®menu, select the "DOWNLOAD P-BOOK" menu item .
..- Press the On/Off button G).
The display shows "PRESS > TO CONFIRM".
..- Press the
book.
> button (j) to transfer the phone
"PHONEBOOK DOWNLOADING WAIT" appears on the display.
PLEASE
After the download is complete, the display
briefly shows "DOWNLD COMPLETE".
Notes:
• To cancel the transfer, press the 5 ~but­
ton @ .
• If the transfer of the phone book fails,
the display briefly shows "DOWNLOAD
FAILED".
• If the transfer of the phone book exceeds
the storage capacity of the car sound system, the display briefly shows "PHONEBOOK FULL". The phone book entries transferred so far remain stored.
• If you supplemented or changed entries
on your cell phone since the last transfer,
you can update the phone book on the car
sound system by transferring it again. If the
storage capacity of the car sound system
51
Bluetooth® I External audio sources I Sound settings
is exceeded in the process, first delete the
already transferred phone book (see the
next section) or unpair another cell phone,
if necessary, so that its phone book is also
deleted from the car sound system (see the
section "Managing paired devices" in this
chapter).
• If you insert a CD during an ongoing transfer, the playback does not start until the
transfer is completed.
Deleting the phone book of the cell phone
from the car sound system
You can delete the phone book of the connected
cell phone.
Note:
The telephone remains connected.
..- In the Bluetooth ®menu, select the "DELETE
P-BOOK" menu item .
..- Press the On/Off button G).
> button (j) to delete the phone
"EMPTY LIST" briefly appears on the display.
Setting the button function for speed dial
You can select whether the long press of the ~
button @ directly opens the phone of the search
function for phone book entries or activates voice
dialing.
..- In the Bluetooth®menu, select the "SOFTKEY"
menu item .
..- Press the On/Off button
setting.
®
Front AUX-IN socket
A
Danger!
~ Increased risk of injury from
connector.
In case of an accident, the protruding connector
in the front AUX-IN socket may cause injuries. The
use of straight plugs or adapters leads to an increased risk of injury.
For this reason, it is recommended to use angled
jack plugs.
As soon as an external audio source, such as a
portable MP3 player is connected to the front
AUX-IN socket @ , it can be selected with the SRC
[email protected] "AUX" then appears on the display.
Sound settings
The display shows "PRESS >TO CONFIRM".
..- Press the
book.
External audio sources
to change the
..- Turn the volume control G) to change
between the settings "PB SEARCH" (for phone
book search), "PHONEBOOK" and "VOICE
DIAl:'.
The following sound settings can be changed in
the "AlJDIO" menu:
• Adjusting bass and treble
• Setting the left/right volume distribution
(Balance) or front/rear (Fader)
• Adjusting the increase of bass at low volume
(X-Bass)
• Selecting a sound profile (Presets)
• Switching the subwoofer output on/off
• Adjusting the time delay for switching in an
external amplifier
Calling and exiting the "AUDIO"
menu
..- Briefly press the MENU
the user menu.
® button to open
..- Turn the volume control G) until the "AUDIO"
menu item is selected .
..- Press the On/Off button
"AUDIO" menu.
52
0
to open the
Sound settings
..- Turn the volume control 0
menu item is selected.
until the desired
..- Perform the setting (see the next section).
..- Briefly press the MENU button
menu.
1:.D to exit the
Notes:
• The menu is automatically exited approx.
16 seconds after the last button activation
and you are returned to the display of the
current audio source.
• In the menu, you can press the button
in each case to return to the higher
menu level.
<0
• The menu does not allow changing the
volume or muting (Mute) the car sound
system.
Making settings in the "AUDIO"
menu
BASS
Bass level. Settings: -7 to +7 .
...- Press the On/Off button
setting.
G)
...- Turn the volume control 0
volume distribution is set.
to change the
until the desired
X-BASS
Increase of bass at low volume. Settings: ON, OFF.
...- Press the On/Off button
setting.
0
to change the
...- Turn the volume control 0
between the settings.
G)
..- Turn the volume control 0
level is set.
to change the
until the desired
G)
...- Press the On/Off button
setting .
to change the
G)
..- Press the On/Off button
setting.
..- Turn the volume control 0
level is set.
to change the
until the desired
BALANCE
Left/right volume distribution. Settings: L9 (left)
to R9 (right).
G)
..- Turn the volume control 0
volume distribution is set.
to change the
to change
SUB-OUT (subwoofer output)
Switching the subwoofer output on or off.
Settings: ON, OFF.
G)
...- Press the On/Off button
setting.
TREBLE
Treble. Settings: -7 to +7.
to change
PRESETS
Selecting equalizer presettings. Settings: POP,
ROCK, CLASSIC, EQ OFF.
...- Turn the volume control 0
between the settings.
..- Press the On/Off button
setting.
..- Press the On/Off button
setting .
FADER
Front/rear volume distribution. Settings: F9 (front)
to R9 (rear) .
to change the
...- Turn the volume control 0
between the settings .
to change
AMP DELAY
Setting the delay with which a connect amplifier
is switched in. Settings: 0.5/1 .0/1 .5/2.0/2.5 seconds
and OFF (no delay).
...- Press the On/Off button
setting.
G)
...- Turn the volume control 0
delay is set.
to change the
until the desired
until the desired
53
User settings
Making settings in the "TUNER"
menu
User settings
Calling the user menu and selecting
a menu
..- Briefly press the MENU
the user menu.
® button to open
In the user menu, the user settings can be found in
the following menus:
TUNER
AUDIO (see chapter "Sound settings")
DISPLAY
VOLUME
CLOCK
VARIOUS
BLUETOOTH (see the chapter "Biuetooth ®")
..- Turn the volume control G) until the desired
menu is selected.
..- Press the On/Off button @ to open the
selected menu.
•
•
•
•
•
•
•
..- Turn the volume control
menu item is selected.
0
until the desired
..- Perform the setting (see the following sections).
to exit the
..,.. Briefly press the MENU button
menu.
CD
Notes:
• The menu is automatically exited approx.
16 seconds after the last button activation
and you are returned to the display of the
current audio source.
• In the menu, you can press the button
(j) in each case to return to the higher
menu level.
<
• The menu does not allow changing the
volume or muting (Mute) the car sound
system.
TRAFFIC (traffic information)
(only for reception area EUROPE)
Only possible in FM radio mode: Switching priority for traffic announcements on or off. Settings:
ON, OFF.
..- Press the On/Off button (j) to change the
setting.
to change
..- Turn the volume control
between the settings.
If priority is switched on for traffic information, the
display shows the icon-~.
CD
BANDS (band selection)
Activating or deactivating memory banks. Memory banks that can be deactivated: FM2, FMT, AM,
AMT.
..- Press the On/Off button (i) to open the
menu .
..- Turn the volume control G) until the desired
memory bank is displayed .
to change the
..- Press the On/Off button
setting .
to toggle
..- Turn the volume control
between the settings ON (activate memory
bank) and OFF (deactivate memory bank).
CB
G)
Deactivated memory banks are skipped sJuring
the source selection with the SRC button C®.
Note:
If a memory bank is deactivated, the stations
stored in this memory bank are retained.
REGIONAL
(only for reception area EUROPE)
Only possible in FM radio mode: Switching
REGIONAL function on or off. Settings: ON, OFF.
..- Press the On/Off button
setting .
0
..- Turn the volume control
between the settings.
54
to change the
0
to change
User settings
SEEKSENS
Setting the sensitivity of station seek tuning. Settings: LOW, HIGH.
...- Press the On/Off button
setting.
0) to change the
...- Turn the volume control
between the settings.
0
to change
RDSAF
Switching the RDS function on or off. Settings: ON,
OFF.
...- Press the On/Off button
setting.
0
...- Turn the volume control
between the settings.
to change the
0
to change
Note:
If the reception area "ASIA'~ "USA", "S-AM ERICA"
or "THAILAND" is selected, RDS is automatically switched off. The station name continues
to be shown on the display.
PTY
(only for reception areas EUROPE and USA)
Switching the PTY function on or off. Settings: ON,
OFF.
...- Press the On/Off button
setting .
0
to change the
...- Turn the volume control (_~ to change between the settings.
PTYTYPE
Only possible with activated PTY function: Select
a programme type .
...- Press the On/Off button
to change the
setting.
0
0
...- Turn the volume control
to change between the available programme types.
PTY LANG
Only possible with activated PTY function: Select
the language for the display of the programme
types. Settings: ENGLISH, DEUTSCH (German),
FRANCAIS (French).
...- Press the On/Off button
to change the
setting.
®
...- Turn the volume control
tween the languages.
0
to change be-
AREA (reception area)
Select the reception area for the radio reception .
Settings: EUROPE, ASIA, USA, S-AMERICA, THAILAND.
...- Press the On/Off button
menu.
0
...- Turn the volume control
between the reception areas.
...- Press the On/Off button
tion area.
0
0
to open the
to change
to select a recep-
The display shows "PRESS >TO CONFIRM".
>
...- Press the
button
selected reception area.
0
to confirm the
Making settings in the "DISPLAY"
menu
DIM MODE
Select automatic or manual switching of the display brightness for day or night. Settings: AUTO
(display brightness is automatically switched by
switching the driving lights on or off), MAN (display brightness can be switched manually).
...- Press the On/Off button
to change the
setting .
0
...- Turn the volume control
between the settings.
0
to change
Automatic switching of the display brightness is
possible only If your car sound system is installed
as described in the installation instructions and
your vehicle features the corresponding connection.
55
User settings
DIM DAY/DIM NIGHT
Setting the display brightness for the day (DIM
DAY) or the night (DIM NIGHT). Settings: 1 - 16.
f::'
...- Press the On/Off button \2) to change the
setting.
...- Turn the volume control ~) to set the desired
display brightness.
SCROLL
Select the display of scrolling text (e. g. when
displaying MP3 file names) either as single display
or continued display. Settings: 1X (single display),
ON (continued display).
...- Press the On/Off button
setting.
G)
to change the
...- Turn the volume control ~) to change
between the settings.
Making settings in the "VOLUME"
menu
ON VOLUME
Setting the power-on volume. Settings: 1 -50 .
to change the
...- Press the On/Off button
setting.
(D
...- Turn the volume control :8 ) to set the desired
power-on volume.
LAST VOL
If you select the setting LAST VOL, every time you
switch on the radio, the volume level that was set
the last time you switched the radio off is activated
again. Settings: ON, OFF.
A
~
Danger!
High volume
The power-on volume can be unexpectedly high if the LAST VOL setting is selected
and a high volume was set the last time the radio
was switched off.
Always set the device to a moderate volume.
56
...- Press the On/Off button
setting.
G)
to change the
...- Turn the volume control (~ to change
between the settings.
TA VOLUME (traffic announcement volume)
(only for reception area EUROPE)
Setting the minimum volume for traffic announcements. Settings: 1 -50.
...- Press the On/Off button
setting.
0
to change the
...- Turn the volume control G) to set the volume.
TEL VOL (handsfree volume)
Adjust handsfree volume. Settings: 1 -50.
...- Press the On/Off button
setting.
0
to change the
...- Turn the volume control G) to set the volume.
Note:
During the phone call, you can change the
volume directly by means of the volume control G).
BEEP
Switching the confirmation beep on or off. Settings: ON, OFF.
Note:
When storing radio stations, a confirmation beep sounds even if the OFF setting is
selected.
...- Press the On/Off button
setting.
0
...- Turn the volume control
between the settings.
to change the
0
to change
User settings
Making settings in the "CLOCK"
menu
CLKDISP
Switch the permanent display of the time on or off.
Settings: ON, OFF.
RDS CLOCK (automatic time setting)
(only for reception area EUROPE)
Switching automatic clock setting with clock data
transmitted via RDS on or off. Settings: ON, OFF.
Note:
The time set with the clock data may not be
correct, even if an RDS station is being received .
0) to
change the
CD
to change
...- Press the On/Off button
setting .
0) to change the
If the permanent display of the time is switched
on, the time is shown on the display. The display
of the respective audio source is shown only after
pressing a button. Approximately 16 seconds after
the button is pressed last, the time is displayed
again.
...- Turn the volume control
tween the settings.
0) to change be-
...- Press the On/Off button
setting.
...- Turn the volume control
between the settings.
HOUR MODE
Selecting the 12 or 24-hour time. Settings: 12, 24.
...- Press the On/Off button (3) to change the
setting.
...- Turn the volume control (~) to change
between the settings.
SET CLOCK
Setting the time .
...- Press the On/Off button
setting.
DEMO MODE
Switching the demo mode on or off. Settings:
ON, OFF.
...- Press the On/Off button
setting .
(:3)
...- Turn the volume control
between the settings.
to change the
CD
to change
In demo mode, the features of the radio are shown
as scrolling text on the display.
@
to change the
...- Turn the volume control (~ counterclockwise
to set the hours .
...- Turn the volume control
the minutes.
Making settings in the "VARIOUS"
menu
0
clockwise to set
Note:
When you set the time in 12-hour mode
(MODE 12H), an "A" is displayed before the
time for the time before noon or a "P" for the
time after noon.
BROWSE
Switching fast track selection in browse mode on
or off using the volume contro1 8~~ and the On/Off
button 12). Settings: ON, OFF.
...- Press the On/Off button \2) to change the
setting .
...- Turn the volume control
between the settings.
0
to change
SCAN TIME
Setting the scan time in seconds. Settings:
4/8/12/16/60 seconds.
.... Press the On/Off button
setting .
® to change the
...- Turn the volume control
between the settings.
0
to change
57
User settings I Factory settings IUseful information
SWC (Steering Wheel Control configuration)
Configuring the buttons of a connected steering
wheel control.
to open the
..- Press the On/Off button
menu.
to change
..- Turn the volume control
between the functions.
Factory settings
Important factory settings in the user menu:
0
0
..- Press the On/Off button ® to select a function.
..- Press the corresponding button on the steering wheel control for approx. 1 second to program the button with the selected function.
VERSION
Displaying the current software version of the
radio.
..- Press the On/Off button G) to open the
menu.
to change
..- Turn the volume control
between the display of the version number
of system software and Bluetooth software.
0
NORM SET
Restoring the original factory settings of the car
sound system.
..- Press the On/Off button
CD.
The display shows "PRESS> TO CONFIRM".
..- Press the
ting.
> button 0
to confirm the reset-
The car sound system switches off and is reset to the factory settings. If a CD has been
inserted in the CD drive, the car sound system
automatically switches on again (Barcelona
230 only).
58
AREA
EUROPE
FM2 I FMT I AM I AMT
ON
RDS AF*
ON
REGIONAL*
OFF
TRAFFIC*
OFF
SEEK SENS
HIGH
PTY**
OFF
ON VOLUME
20
TAVOLUME*
20
BEEP
ON
BROWSE
ON
SCAN TIME
8SEC
DIM MODE
MAN
HOUR MODE
24H
SET CLOCK
00:00
* Only in reception area "EUROPE"
** Only in reception areas "EUROPE" and "USA"
In the user menu, you can restore the original
factory settings of the car sound system (see the
chapter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "NORMSET") .
Useful information
Warranty
We provide a manufacturer's warranty for products bought within the European Union. For devices purchased outside the European Union, the
warranty terms issued by our respective responsible domestic agency are valid. The warranty terms
can be called up from www.blaupunkt.com.
Useful information ITechnical data
Service
In some countries, Blaupunkt offers a repair and
pick-up service.
Information about the availability of this service in
your country can be found at www.blaupunkt.com.
If you want to take advantage of this service, you
may request a pick-up service for your car sound
system via the Internet.
Technical data
Voltage supply
Operating voltage:
Pre-amp out
4 channels:
4V
Input sensitivity
Front AUX-IN:
300 mV I 10 kO
Dimensions and weight
W x H x D (incl. antenna connection adapter):
Barcelona 230:
178 x 52 x 170 mm
Brisbane 230:
178 x 52 x 116 mm
10.5 - 14.4 V
Weight:
Current consumption
In operation:
< 10 A
10 sec. after switch-off: < 3.5 rnA
Amplifier
Output power:
CD (Barcelona 230 only}
20 - 20,000 Hz
Frequency range:
Barcelona 230:
approx. 1.55 kg
Brisbane 230:
approx. 0.79 kg
4 x 22 watts sine
at 14.4 Vat 4 ohms.
4 x 50 watts max. power
Tuner
Wavebands in Europe/Asia!fhailand:
FM:
87.5- 108 MHz
AM:
531- 1,602 kHz
Wavebands in the US:
FM:
87.7- 107.9 MHz
AM:
530-1,710kHz
Wavebands in South America:
FM:
87.5- 107.9 MHz
AM:
530-1,710 kHz
FM frequency response: 30 - 15,000 Hz
Subject to changes
59
Einbauanleitung !Installation instructions
DE
Einbauanleitung
EN
Installation instructions
A Sicherheitshinweise
A Safety instructions
L.l.l Fur die Dauer der Montage und des An- L.l.l When carrying out installation work and
schlusses beachten Sie bitte folgende Sicherheitshinweise.
•
making connections please observe the following
safety instructions:
Minuspol der Batterie abklemmen! Dabei die
Sicherheitshinweise des Kfz-Herstellers beachten.
•
Disconnect the negative terminal of the battery! When doing so, please observe the vehicle manufacturer's safety instructions.
Beim Bohren von Lochern darauf achten, dass
keine Fahrzeugteile beschadigt werden.
•
Make sure you do not damage vehicle components when drilling any holes.
Der Querschnitt des Plus- und Minuskabels
darf 1,5 mm 2 nicht unterschreiten.
•
The cross sections of the positive and negative
cables must not be less than 1.5 mm 2•
Fahrzeugseitige Stecker nicht an das Radio
anschlieBen!
Die fUr lhren Fahrzeugtyp erforderlichen
Adapterkabel erhalten Sie im BLAUPUNKTFachhandel.
Je nach Bauart kann lhr Fahrzeug von dieser
Beschreibung abweichen. Fur Schaden durch
Einbau- oder Anschlussfehler und fur Folgeschaden ubernehmen wir keine Haftung.
Sollten die hier aufgefuhrten Hinweise fur
lhren Einbau nicht passen, so wenden Sie
sich bitte an lhren Blaupunkt-Fachhandler,
lhren Fahrzeughersteller oder unsere TelefonHotline.
Bei Einbau eines Amplifier mussen unbedingt erst
die Geratemassen angeschlossen werden, bevor
die Stecker fUr die Line-Out-Buchse kontaktiert
werden.
Fremdgeratemassen durfen nicht an der Autoradiomasse (Gehause) angeschlossen werden.
Do not connect the vehicle's plug connectors to the radio!
You can obtain the adapter cable required
for your vehicle type from any BLAUPUNKT
dealer.
•
Depending on the model, your vehicle may
differ from the description provided here. We
accept no responsibility for any damages due
to incorrect installation or connection or for
any consequential damages.
If the information provided here is not suitable for your specific installation requirements,
please contact your Blaupunkt dealer, your vehicle manufacturer or our telephone hotline.
When installing an amplifier, you must first connect the device earth connections before connecting the plugs for the line-out jacks.
Earth connection of external devices may not
be connected to earth of car sound system
(housing).
1179
Notice de montage jlnstrucciones de instalaci6n
FR
Notice de montage
ES
A Consignes de securite
L..1.1 Respecter les consignes de securite suivantes pendant Ia duree du montage et du branchement.
•
Debrancher le pole (-)de Ia batterie! Respecter les consignes de securite du constructeur
automobile!
A Normas de seguridad
L..1.1 Durante el montaje y Ia conexi6n es imprescindible observar las siguientes normas de
seguridad.
•
Desemborne el polo negativo de Ia baterfa.
Observe las normas de seguridad dadas par el
fabricante del vehfculo .
•
AI perforar agujeros, asegurese de no dariar
ninguna pieza del vehfculo.
•
La secci6n transversal del cable positivo y del
cable negativo no debe ser menor de 1,5 mm 2.
•
jNo conecte a Ia radio los conectores ubicados en el vehiculo!
Los cables adaptadores necesarios para su
vehfculo los encontrara en el comercio especializado en artfculos de Ia marca BLAUPUNKT.
•
Dependiendo del modelo, es posible que su
vehfculo varfe un poco con respecto a Ia descripci6n aquf dada. Tenga en cuenta que no
asumimos ninguna responsabilidad par los
darios debidos a un montaje o conexi6n incorrectos ni par los darios resultantes.
• Veiller an'endommager aucune piece du vehicule en
•
per~ant
des trous.
La section du cable(+) et (-) ne doit pas depasser 1,5 mm.2
• Ne pas brancher les connecteurs du vehicule sur Ia radio !
Les cables d'adaptation necessaires pour le
type de vehicule sont disponibles aupres des
revendeurs BLAUPUNKT.
• En fonction du modele, votre vehicule peut
differer de cette description. No us declinerons
toute responsabilite en cas de dommages
causes par des erreurs de montage ou de
connexion et en cas de dommages consecutifs.
Si les indications decrites ici ne s'appliquent
au montage que vous voulez effectuer, adressez-vous a votre revendeur Blaupunkt, votre
constructeur automobile ou notre service
d'assistance telephonique.
Pour le montage d'un amplificateur, les masses
d'appareil doivent etre d'abord connectees av~nt
de connecter les fiches pour les connecteurs L1ne
Out.
Les masses des appareils externes ne doivent
pas etre raccordees a Ia masse de l'autoradio
(boitier).
180
lnstrucciones de
instalaci6n
Si las instrucciones aquf dadas no son aptas para el montaje en su vehfculo, p6ngase
en contacto con su proveedor de artfculos
Blaupunkt o con el fabricante del vehfculo, o
llame a nuestro telefono de atenci6n al cliente.
En caso de montar un amplificador, es necesario
conectar Ia puesta a tierra de las unidades antes
de establecer el contacto de los conectores para
las hembrillas Line-Out.
No deben conectarse masas de otros equipos a
Ia masa de Ia radio (carcasa).
lnstru~oes de montagem
PT
lnstru~oes de montagem
ID
I Petunjuk pemasangan
Petunjuk pemasangan
A Petunjuk keselamatan
A lnstru~oes de seguran~a
Lll Durante a montagem e a ligac;ao do apa- Lll Ketika memasang dan menyambungkan
relho, queira respeitar as seguintes instruc;6es de
seguranc;a.
perangkat, perhatikan petunjuk keselamatan
berikut.
•
Separar o p61o negativo da bateria! Respeitar
ao mesmo tempo as instruc;6es de seguranc;a
do fabricante do autom6vel.
•
Putuskan koneksi kutub negatif baterai! Untuk
itu, perhatikan petunjuk keselamatan yang
diberikan oleh pabrikan kendaraan Anda.
•
Quando se procede a furagem de buracos,
prestar atenc;ao para nao serem danificadas
quaisquer partes do vefculo.
•
Ketika melakukan pengeboran, pastikan Anda
tidak merusak komponen kendaraan.
•
As secc;6es transversais dos cabos positivo e
negativo nao devem ser inferiores a 1,5 mm 2•
Penampang lintang kabel positif dan negatif
tidak boleh kurang dari 1,5 mm 2•
•
Nao ligar as fichas existentes do lado do autom6vel ao auto-radio
Os cabos adaptadores necessarios para o seu
autom6vel podem ser adquiridos nos revendedores da BLAUPUNKT.
Jangan sambungkan konektor steker
kendaraan ke radio!
Anda dapat memperoleh kabel adaptor yang
diperlukan untuk jenis kendaraan Anda dari
dealer BLAUPUNKT.
•
Tergantung modelnya, kendaraan Anda
mungkin bisa berbeda dengan penjelasan
ini. Kami tidak bertanggung jawab atas
kerugian yang terjadi pada kesalahan proses
pemasangan atau penyambungan atau untuk
kerugian-kerugian lainnya.
•
•
•
0 seu vefculo pode divergir desta descric;ao
em func;ao do modelo. Nao assumimos qualquer responsabilidade par erros de mantagem ou de ligac;ao nem par danos daf decorrentes.
Caso as presentes instruc;6es nao sejam adequadas para a montagem no seu vefculo,
dirija-se ao revendedor da Blaupunkt, ao fabricante do seu vefculo ou a nossa linha verde.
No caso de montagem de um amplificador, e imprescindfvel ligar primeiro OS aparelhos a terra
antes de se conectar as fichas as tomadas Line Out.
A massa de aparelhos externos nao deve ser
ligada amassa do auto-radio (caixa).
Jika petunjuk yang dijelaskan di sini tidak
bisa diterapkan pada proses pemasangan
radio mobil Anda, sebaiknya proses tersebut
dilakukan oleh teknisi di dealer khusus
Blaupunkt atau hubungi nomor telepon kami.
Pada saat pemasangan amplifier, Anda harus
menghubungkan perangkat ke ground terlebih
dahulu sebelum menghubungkan steker ke soket
line-out.
Ground perangkat eksternal tidak boleh
dihubungkan ke ground.
181
Mitgelieferte Montage- und Anschlussteile
Supplied mounting hardware
Materiel de montage fourni
Ferreteria de montaje suministrada
Elementos de fixa~ao fornecidos
Komponen pemasangan dan penghubung
yang disertakan
Als Sonderzubehor erhaltlich
Available as an opti.onal accessory
Disponible en option
De venta como accesorios especiales
Disponiveis como acessorios opc.ionais
Tersedia sebagai aksesori tambahan
Einbausatze
Installation kits
Kits de montage
Juegos de montaje
Kits de montagem
Kit pemasangan
182
1.
4.
C"';'l
.-
uou
:s:z:s:
Vl'-.9Vl
Microphone In
Steering wheel
remote control
Antenna
connection
~~~~~1H~~f4~
2. Barcelona 230 only
Sub Out
(Subwoofer)
Preamp Out
(4 channels)
s.
3.
0°-
30:)~ill~
~ r-,__
·'
Ill/ /Ill
+I- 10°
~ ··~._./
-~
-" -·· ·._ ··•~--__;...,
.-· }
.. . .
-
Ill
--
1111111 \1111111111/lllli);:;;;tl//l
+/-1~:,~ ~~~
;//Ill/ IIIII/I/ IIIII/;/ IIIII/ IIIII
183
6.
7.
Ausbau • Removal • Demontage • Desmontaje •
Desmontagem • Pelepasan
1.
2.
3.
...
A
B
1
NC
1
Speaker out RR+
2
Telephone Mute
2
Speaker out RR-
3
NC
3
Speaker out RF+
4
Permanent + 12V
4
Speaker out RF-
5
Auto antenna*
5
Speaker out LF+
6
Illumination
6
Speaker out LF-
7
Kl.15/lgnition
7
Speaker out LR+
8
Ground
8
Speaker out LR-
* -/
o-
8
11 31 sl 11
21 41 sl al
<C
11 31 sl 71
21 41 sl al
:;:)
0
.....
w
V'l
LL.
Switched power supply +12 VI max. 150 mA
Telephone Mute
Anderungen vorbehalten! ·Subject to changes!· Sous reserve de modifications!·
iModificaciones reservadas! ·Sob reserva de altera~6es! • lnformasi dapat berubah sewaktu-waktu!
185
Supported iPod/ iPhone devices
Our product can support below listed iPod/ iPhone generations:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
iPod touch (5th generation)
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod with video
iPod nano (7th generation)
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPod
iPhone 5s
iPhone 5
iPhone 45
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
"Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect
specifically to iPod, iPhone respectively, and has been certified by the developer to meet Apple
performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory
standards.
Please note that the use of this accessory with iPod, iPhone may affect wireless performance.
iPhone, iPod are trademarks of Apple Inc., registered in the U.S. and other countries.
This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such
technology outside of this product is prohibited without a license from Microsoft.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
© 2014 All rights reserved by Blaupunkt. This material may be reproduced, copied or distributed for
personal use only.
186
Bitte den ausgefullten Geratepass sicher aufbewahren!
Please keep the filled-in radio pass in a safe place!
Priere de conserver soigneusement Ia carte d'autoradio remplie!
jFavor guardar el documento del aparato debidamente llenado en un Iugar
seguro!
Por favor, guardar o cartao preenchido do aparelho num Iugar seguro!
Simpan dengan baik dokumen perangkat Anda yang sudah terisi!
1187
Name:
Type:
Serial no.:
1 011 402
001
BP ..................................................... ......................................................... .
eBLA UPUN KT
Blaupunkt Europe GmbH
Robert-Bos ch-StraBe 200
D-31139 Hildesheim
http://www .blaupunk t.com
s 101 020 015
03/14
450 290 - de, gb, fr, es, pt, id
CE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement