Task Force Tips VUM, model # AKP111113D manually controlled monitor valve shall be
provided under the monitor. The valve shall be controlled with an NFPA compliant slow-close
crank handle gear operator. A position indicator shall be provided to allow for quick
visualization of the status of the valve in the open, closed or partial positions. The unit shall have
a flow capability of up to 2000 GPM with friction loss no more than 6 psi. For maximum
corrosion protection the aluminum casting shall be hardcoat anodized, with a silver powder coat
internal and external finish. The valve ball shall be stainless steel and have an automatic drain for
draining waterway when valve is closed and unpressurized. The unit shall have a unique serial
number and be covered by a five-year warranty.
The valve shall be configured with a 4" ANSI 150 flange inlet and TFT Code RPM male
connection for a Task Force Tips monitor with TFT Code RPF female inlet. Ports C1, C2, C3,
shall have blind plugs installed. Port C4 shall have a right hand elbow quarter turn valve with 21/2” NH male outlet installed. All 2-1/2” NH male discharges shall have a 2-1/2” NH female by
1-1/2” NH male thread reducer and a 1-1/2” NH female cap with lanyard.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF