Fluke 90i-610s 電流鉗 AC/DC600A Φ34 BNC

Fluke 90i-610s 電流鉗 AC/DC600A Φ34 BNC
90i-610s 1A to 600A AC/DC
Current Probe
Overview:
The 90i-610s is compatible with any Fluke ScopeMeter Test Tool,
Power Harmonics Analyzer, Oscilloscope, Multimeter, or other
voltage measurement device that has the following features: BNC
input connectors or if using a meter a BNC to banana plug adapter
PM9081/001 (included) lets you use this probe with your DMM.
•
Current Range: 1 to 600 A DC or AC Peak
•
Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A)
Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A
Frequency Range: 40 Hz to 400 Hz
•
•
•
•
•
Working Voltage: 600 V AC rms
Maximum Conductor Diameter: 34 mm (1.34 inch)
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation
Category II, Working Voltage 600V
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement