SignaMax Category 6A Screened Toolless Keystone Jacks Installation instructions
Below you will find brief information for Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C. This document provides installation instructions for the Signamax Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C, Keystone Jack KJS458TL-C. It covers topics such as preparing the cables, installing the jack, and securing the termination cap.
Advertisement
Advertisement
Advertisement
Key features
- Toolless installation
- Screened
- IDC termination
- Easy to use
- Reliable connection
- Compact design
Frequently asked questions
Strip back at least 25 mm (1 in) of cable jacket and fix braid to screen, separate twisted pairs, trim, crimp, turn braid, and wrap drain wire around them.
Start inserting termination cap into jack's IDC compartment, press cap firmly down, continue until you hear a click.
Pliers or other appropriate tool may be used to close jaw completely