http://www.d-r.nl/wiki/dokudata/faq/airence/AIRENCE ROUTING USB CHANNELS

http://www.d-r.nl/wiki/dokudata/faq/airence/AIRENCE ROUTING USB CHANNELS
AIRENCE ROUTING USB CHANNELS
The return signals of the USB codec of the Airence are standard routed as followed:
1 - USB audio codec ( the codec corresponding to the first channel of the Airence) – Program Pre fader
2- USB audio codec ( the codec corresponding to the first channel of the Airence) – Program Post fader
3- USB audio codec ( the codec corresponding to the first channel of the Airence) – Sub
4- USB audio codec ( the codec corresponding to the first channel of the Airence) – Aux
In Windows 7 you can rename the USB codec like in the picture below to make the codec selection in
Aircast easier.
As for your encoder you can choose either Prog pre or Prog Post.
For voice tracking you can select Sub as an input so you can do your voice tracking during on-air by
routing the mic channel to the sub bus.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement