Bettis Hand Pump – Direct Mounted for BHH/BHHF Actuators

Bettis Hand Pump – Direct Mounted for BHH/BHHF Actuators
Data sheet
HPDM01
Sheet No.: HPDM01.01 RevA
Date: October 2010
Bettis Hand Pump – Direct Mounted for BHH/BHHF
Actuators
Description:
The direct mounted hand pump is installed directly on single and double line actuators i.e. no
extra pipe or block installation is required. The direct mounted hand pump is mainly together with
valves which are easy to access. For the main part of the double line actuators an additional tank
is not needed, but for the biggest an additional tank must be added to compensate for the oil
compression and decompression. For the single line actuators an additional tank must always be
added to operate the valve. A larger tank is also needed for the biggest single line actuators due
to oil compression and decompression.
Application:
Hand pump type:
Range:
HP-D
HP-D-1
HP-S-1
HP-S-4
BHH 125 - 2000 & BL 65 BHH 4000 - 16000 & BL 250
BHHF 125 - 2000
BHHF 4000 - 16000
Please note that a BLF must be used instead of a BL actuator with a direct mounted hand pump.
Direct mounted hand pump for HP-D and BHH 500 and
HP-S-1 and BHHF 500:
HP-D and BHH 500
www.Bettis.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
HP-S-1 and BHHF 500
Data sheet
HPDM01
Sheet No.: HPDM01.02 RevA
Date: October 2010
Hydraulic diagram for HP-D-1:
ACTUATOR AREA
1.
Double line actuator
2.
Bypass valve
3.
Double pilot operated
4.
Check valve
5.
Throttle valve
6.
Filter
7.
Remote connection line B (OPEN)
8.
Remote connection line A (CLOSE)
9.
Stop valve
10.
Direction valve
11.
Hand pump handle
12.
Tank
(6.69)
(7.64)
(7.64)
(13.46)
Dimension for HP-D-1:
(2.48)
(1.38)
(2.44)
(2.05)
(3.15)
(3.15)
www.Bettis.com
(.78 in.)
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
(5.75)
(7.00)
Data sheet
HPDM01
Sheet No.: HPDM01.03 RevA
Date: October 2010
Hydraulic diagram for HP-S-1/-4:
ACTUATOR AREA
(20.78)
(2.48)
(5.95)
(6.85)
(13.47)
(13.46)
Dimensions for HP-S-1/-4:
(1.38)
(2.05)
(3.15)
(.78 in.)
(3.94)
Note: Not Certified dimensional drawings. Such drawings are available on request. Contact factory with correct model designation and serial number.
Important: Due to Emerson’s continuing commitment to engineered product advancement, data presented herin is subject to change.
The contents of the publication are presented for information purposes only, and while effort has been made to ensure their accuracy,
they are not to be construed as warranties or guarantees, expresses or implied, regarding the products or services described herein or their use or applicability.
All sales are governed by our terms and conditions, which are available on request.
We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
www.Bettis.com
(7.00)
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.bettis.com or from your nearest Valve Automation Center.
USA: +1 281 727 5300 Europe: +31 74 256 1010 Asia-Pacific: +65 6501 4600
(8.19)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement