50281 2 ifs d2100 series ds fin

50281 2 ifs d2100 series ds fin
cription
IFS® Line / Fiber Transmission
D2100 Series
IFS RS-232/422 Drop and Repeat
Data Transceivers
Specifications
Data
Data Interface:
Data Rate:
Operating Mode:
Bit Error Rate:
RS-232 (data lines only), or RS-422 (see note)
DC - 100 Kbps
Asynchronous Simplex or Full-Duplex
<1 in 10˚
OVERVIEW
STANDARD FEATURES
Wavelength
D2100: 850 nm, MM D2120: 1310 nm, MM
D2125:
1310
nm,
SMrepeat
D2100WDM: 850/1310
The IFS D2100 Series data transceivers
provide
drop
and
• Meets nm,
EIA MM
RS-232/422 Specifications (Simplex or Duplex)
transmission
of
simplex
or
duplex
EIA
RS232/RS-422
data
signals
•
Drop
and
Repeat
Network Architecture
NumberOfFibers
D2100WDM: 1 In/1 Out
All Others:feature
2 In/2 optical
Out
over one or two optical fibers. The transceivers
• Transparent to Data Encoding/Compatible with Major Data Protocols
“dropConnectors
& repeat” capability that allows the user to easily configure
• Data Rates up to 100 Kbps
the network
• No In-field Electrical or Optical Adjustments Required
Optical: operation. The transceivers
STare transparent to data
DataThe
andtransceivers
Power:
Terminalwith
Blockthe
with
Clamps • Power, Transmit and Receive Data Status LED Indicators
protocol.
are also compatible
IFSScrew
D1010
Series
data transceivers.
Models within this series are available
• NTCIP Compatible
Electrical&M
echanical
Power:
• Tested and Certified by an Independent Testing Laboratory for Full
for use with multimode or single mode optical fiber. Plug and Play
Surface Mount:
12 VDC @ 250 mA
design ensures ease of installation requiring no electrical or optical
Compliance with the Environmental Requirements (Ambient Operating
Rack:
From Rack
adjustments.
Each
transceiver
incorporates
power and transmit/
Temperature, Mechanical Shock, Vibration, Humidity with
Number of
Rack
Slots:
1
Current
Solid-State Current
Limiters
receive
data Protection:
status indicating LED’s forAutomatic
monitoringResettable
proper system
Condensation,
High-Line/Low-Line Voltage Conditions and Transient
Circuit Board:
Meets IPC Standard
operation.
The modules
Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans
Size (in./cm.)
(LxWxH)are available in either stand-alone or rack
Surface
Mount:
4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
mount
versions.
Specification for Traffic Signal Control Equipment.
Rack Mount:
7.0 x 5.0 x 1.0 in., 17.8 x 12.7 x 2.5 cm •
Integrated WDM for Greater Product Reliability
Shipping Weight:
< 2 lbs./0.9 kg
• Automatic Resettable Solid-State Current Limiters
Environmental
• Hot-Swappable Rack Modules
APPLICATION
EXAMPLES
MTBF:
> 100,000 hours
• Distances up to 26 Miles (42 km)
Operating Temp:
-40° C to +74° C
• Access
Control
Storage
Temp:Systems
-40° C to +85° C
• Comprehensive Lifetime Warranty
Relative
Humidity: and Environmental
0% to
95% (non-condensing)†
• Building
Automation
Control
Systems
• Computer/Data
Equipment
†May be extended
to condensation conditions by adding suffix ‘–C’ to
model
number
for conformal coating.
• Fire & Alarm Systems
• Traffic Signal Control Equipment
NOTE: The D2100 Series is compatible with some RS-485 (4-wire) systems, consult factory.
System Design
SYSTEM DESIGN
up to 2.5 miles
(4 km)
D1010
RS-232
ifs
D2100
International
ifs
Fiber
Systems
Incorporated
203.426.1180
Host
D2100
International
ifs
Fiber
Systems
Incorporated
203.426.1180
D1010
International
ifs
Fiber
Systems
Incorporated
203.426.1180
International
Fiber
Systems
Incorporated
203.426.1180
2 Fibers
62.5/125μm MM
RS-422
RS-422
RS-422
RS-232 host drop and repeat to RS-422 remotes
Remote
Remote
Remote
interlogix.com
FibersRequired
Opt.Pwr.Budget
Max.Distance*
D2100 Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS RS-232/422 Drop and Repeat Data Transceivers
Ordering Information
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
Multimode 62.5/125µm**
D2100
Repeater (850 nm)
2 In/2 Out
14 dB
2.5 miles (4 km)
D2100WDM
Repeater (850/1310 nm)
1 In/1 Out
14 dB
2.5 miles (4 km)
Single Mode 9/125µm
D2125
Repeater (1310 nm)
2 In/ 2 Out
14 dB
26 miles (42 km)
Accessories ♦
PS12VDC1.5A-U
12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
Options
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
GE
Security
Specifications
Data
Data Interface:
RS-232 (data lines only), or RS-422 (see note)
Data Rate:
DC - 100 Kbps
Operating Mode:
Asynchronous Simplex or Full-Duplex
Bit Error Rate:
<1 in 10°
Wavelength
D2100:
850 nm, MM
D2120:
1310 nm, MM
D2125:
1310 nm, SM
D2100WDM:
850/1310 nm, MM
Number Of Fibers
D2100WDM:
1 In/1 Out
All Others:
2 In/2 Out
Connectors
Optical
ST
Data and Power:
Terminal Block with Screw Clamps
Electrical & Mechanical
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Power:
Surface Mount:
12 VDC @ 250 mA
Rack:
From Rack
Number of Rack Slots:
1
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
Specifications subject to
change without notice
Agency Compliance
© 2008 General Electric Company
Complies
with
FDA Performance
All Rights
Reserved
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Size (in./cm.) (LxWxH)
Surface Mount:
4.2 x 4.0 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Rack Mount:
7.0 x 5.0 x 1.0 in., 17.8 x 12.7 x 2.5 cm.
Shipping Weight:
< 2 lbs./0.9 kg
Environmental
MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C*
Storage Temp:
-40° C to +85° C*
Relative Humidity:
0% to 95% (non-condensing)
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Ordering Information
PartNumber
D1010
interlogix.com
NOTE: The D2100 Series may be compatible with some RS-485 (4-wire) systems.
D1010WDMA✧
Multimode
D1010WDMB
62.5/125µm**
Specifications subject
to change without
notice.
D1020
© 2013 United Technologies Corporation
All rights
reserved.
D1030
Interlogix is part of UTC Building
& Industrial
Systems, ✧
Single Mode
D1030WDMA
a unit of United
Technologies Corporation.
9/125µm
D1030WDMB
Accessories♦
Options
De
RS
RS
RS
RS
RS
RS
RS
D2100 Series
PS-12VDC 12 Volt DC Plu
PS-12VDC-230 12 Volt D
Add ‘-R3’ to Model Num
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement