Forward Path:
TECHNICAL
DATA
DRAKE DDA5542R DISTRIBUTION AMPLIFIER
Forward Path:
Gain:
Gain Adjust Range:
Frequency Coverage:
AND
SPECIFICATIONS
1002724
42 dB nominal, 40 dB minumum
15 dB minimum
54 - 550 MHz
Flatness:
± 1.5 dB maximum
Slope Adjust Range:
Flat to >15 dB tilt at 54 MHz
Noise Figure:
6 dB typical, 7 dB maximum (at maximum gain setting)
Impedance:
75 Ohms
Return Loss
16 dB typical, 14 dB worst case
16 dB typical, 14 dB worst case
Input:
Output:
- 30 dB, ± 2 dB
Output Test Port:
Composite Triple Beat (CTB):
- 63 dB typical, - 60 dB maximum *
Cross Modulation (XMD):
- 65 dB typical, - 62 dB maximum *
Composite Second order (CSO):
- 60 dB typical, - 57 dB maximum *
*Measured at +40 dBmV per channel with 77 channel loading
Return Path:
Configuration:
Passive, Insertion loss 2 dB typical, 4 dB maximum
Frequency Range:
5 - 36 MHz
Return Loss:
16 dB typical, 14 dB worst case
General:
Amplifier Type:
Push-Pull Hybrid Amplifier Module
Operating Temperature:
- 20° C to + 50° C (- 4° to + 122° F)
Power Supply:
Included with amplifier
Input Power Rating:
100 - 120 VAC, 50/60 Hz
Input Connection:
3 wire line USA plug
Output Power Rating:
24 VDC, 700mA
Output Connection:
Power Cable with disconnect
Amplifier Unit:
Enclosure:
Extruded aluminum
Dimension:
9" L, including connectors X 5.5" W X 2.5" H
Shipping Weight:
2.4 lbs., including power supply
Power Requirements:
Amplifier: 24 VDC, 12 Watts
Specifications, price, and availability are subject to change without notice or obligation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement