littelfuse switches momentary special purpose 2d prints

littelfuse switches momentary special purpose 2d prints
 —] pe 0.048 [1.21]
=
| — 2.120 (53.84)
CONTACTS OPEN (0.090 [2281 MAX) D
0889 [
MOUNTING HOLE
SCALE 21
[=4———— —— 1.560 [39.62]
ня |
CS
|
#1‚050 [26.67]
| 1
0.420 [10.67] || ||
PAN
KT
|-+— 0.060 (1.521
0.355 [ 9.0
Ro:320 [ Rada
Revision Control! Record
Rev, Description of Change ECN No. | Date
с PANEL VIEW ; 00728 9/27/00
D NORMALLY CLOSED 00864 1214/00
SWITCH ACCEPTS (2)
0.156 [3.96] DIA MALE
BULLET TERMINALS
NOTES!
1. ALL DIMENSIONS REFERENCE
2. CONTACTS NORMALLY
CLOSED
Tolerances Unless otherwise specifically noted, the following | TION ose Desing, and the Key for Spactal Charsctedstos:
a default tolerances; information contalned harain, ls propristany to Cote Herses
* 2-ptaca Decimal Dimensions +07" Company and may not be dsclosed, reproduced, ui In airy other crea charcoal, lang to Safety andfor
* 4place Decimal Airencens es dos" ey transfered or commanicated te amy other party without the Regulstory Camplianc
J Angular G Pensar 1.0
to kei English Dimension Tocino Hersea Company. x Significant Characteristic refating lo Process Control
> hore: "Al otrancas are DESIGN CONTROL | 4 ls the responielbilty of tha Individual Lsing/ (PE)
Dimea sional U ax Ta Ara DAT o Control Dimension relating In Form - Flt - Funedion
{Master Drawing). This ls a NON-CONTROLLED DOCUMEN 28 defined by Cale Nercen Company anta the
excopl oes 58 8 in brackets (ac) are ecpresagd in
millimel
“REF.” of an Asterisk {} =MNon-Tolsranced Refersnce
wes only.
Dimstvslon, shown for clarification pum
etherwisa specifically noted.
Customer
Cole Hersee Co.
20 Old Colony Ava., South Boston, MA, 02427
Cr
Phn: 617-268-2400 W
Description: DOOR SWITCH - N/C
DO NOT SCALE
reproduction.
a printing
perlar specced
Used On
or Ref.
| Scale 2:1
bmn NK ows B/25/60
Pg.1 of 1
Responsible N/A
Engineer
Drawing! Current Rev,
Part No.: D
9075
CAP (SEE NOTE
SHAFT
0.190 DIA, [4.80]
0.210 [23.11]
О
REMAINDER OF TRAVEL
SPRING RETURN TO ON
HEX NUT S/8-32 (2 REQ'ID
TERMINAL INSULATOR
Revision Control Record
Description of Change ECN No.
x
CHANGED TO NEW STYLE CASE {01701 |1261
CASE
TERMINAL 2 REQD>
1.140 SQ,
—
[28.95]
® |
1.300 [32.51]
HE
o —
0.260 [6.60]
1.015 [25.78]
|
NOTES:
1 CAP AND HARDWARE TO BE SHIPPED LOOSE
2. ALL STEEL PARTS PLATED
3. ALL DIMENSIONS ARE REFERENCE ONLY
UNLESS OTHERWISE SPECIFIED
4. 10 AMPS 8 12 VDC
Untess otherwise spacificaliy noted, the hollowing
Key for Bpesiei Charecteripis:… Cole Hersee Co.
e o
telerantas; on e heraln, 16 proprimtan 10 Cole Hote
* 2 clmal Dimers , cria any «ber
ace Decimal Dleensiono oa re a Ea el ir parte Aten © Filament ming tbs nde 20 Old Coleny Ave, Sou South Basten, MA, 02127
+ Angular Dimensions +10 Des expross rites conpant of an authoriped raprusenéative of Cole Pha: 617-208-2100
Моско Refer te equivalent English Dimetrsion Tolerance нение Сонни El у + Characteristic relating to Process Control
» NOTE: AN tolonsices are ry "Description: on:
resgonettéfiy of the Individual using ! pti
Dimpnsionat Units АН dimensions are axpressed in inches rafarsnring easing os are to ha Stet dog ool Contrel Dipetion ratuting fo Foon ~Fit - Furction : SWITCH, MOMENTARY
wxcapt tose shown in bmackets {xxx} ar expressed in "wa a Or Ts à Ro SHOES OLN un es e 2e dame by Cale Harısa Company andlor the
mime
(ce that te lénndiication nf any Character as being
"REC орал Anterigk Ct. = Non-Toleranced Rea SCALE ent Rey.
eee |e == em lien 91042 u
Scale: Braun Date esponsible -
po brain "2996 EXCUPT NORMALLY ON | 1:1 By: JH Drum: 9/2/70 Engineer N/A | Pg. 1 of 1
_ à
i _ . _ | a
MM IN — SHAFT, STEEL Ë 4 |
v= — CAP, RUBBER (SEE NOTE 1) | 91042 05 |
- 304 HEX NUT, STEEL ( 2 REQD) |
_ 635 —MTG STEM, 5/8-32UN-2A, ALUMINUM |
24 —TERMINAL INSULATOR, BAKELITE
2578 CASE , STEEL
28.95 \
2632 1434 SCREW, 8-32UNC-2A X 635 LG , STEEL ( 2REQD) |
A NA Г
— ДН @ 4 28.95 SQ
JU ee |
| / EQ
1.52 | - Y
304 LOCKWASHER, STEEL (2 REQD }
Ÿ
0
D 5 ie RETURN |
| TO ON 36327
E T nu= Ss
НОЕ _ ) |
+ Ц \ 6.60
Ко | DIA. | NOTES: |
23.1! a 2570 | CAP ANT HARD WARE TO BE SHIPRE CLONE
@2. ALL STEEL PARTS PLATED ™MC® ©
| METRIC | | "DO NOT SCALE
ET WAS DATE |BY|LET WAS DATE ву | MATERIAL DRAWN FZ APPRVDI SCALE 191042 EXCEPT WITH DATE DRAWN
| —#— JAV |519| © FULLISCREW TERMINALS 7-30-79
Clgo* M5 5s ke eel FINISH tu DATE BLUEPRINT
| see curovr |1-2/-98|mb) TF T? Cole Hersee Co.
A | NE lasa39 — 1/2>halyH | TOLERANCES
. SEL ens | MOMENTARY SWITCH |91042-05
э ==
к, Ди CH-188(4-78)
À
Confidential Property of Cole Hersee
GE — BUSHING ; 3/8=24UNFO 5 | 92118 8-06
a - O MARK DATE CODE ON CASE
2.20 |.
22 | 43 Max. TRAVEL hse G >)
, 1 , в LOCKWASHER (2 PEO'D
471.
el | CONTACT MAINTAINED HEX NUT
25944 TR MUST MANE STUDIO SEINE _eeminai. TiN PLATED
279 | 30 + HEX
Li]; THESE LIMITS ——— 225 GEE NOTES) \ CAN nom LOCATION) BI THK.
1255 1 De 779
EZ y N |
Baad !
LE у 1.35 » [152 HEX
95 A AY A 3
idl. % 7.28 MIN в
050 | Zed U NOTE": ROLOVER
Ji “i REF. 2 © APRO 20! APR
й \___swrrew CASE ELECTRICAL GROUND enti
© 7.34
я LEE WIDE X #5 DIA UNERCUT
x i ГЕ <:
x NOT
"i. SEALED AT TERMINAL INSULATDR
| 3, 2.82 Nm[25IN-LB) TORQUE APPLIED TD STUD SHALL NOT
| AFFECT THE PHYSICAL INTEGRITY OF THE SWITCH
4. 10,84 Nm{2FT-LE] MAX. INSTALLATION
METRIC 5 ALLSTEEL PARTS PLATED
=== 5 b. 5 AMPS ® 24Y DC
Confidential Property of Cole Hersee | DO NOT SCALE
~ MATERIAL | DRAWN [crseoxen SCALE у DATE DRAWN
+ SAE chien REV 2778 E ся —— 16 : Lal acre 4-29-81
PART 10. A 71 Apo Ghouvt ah _ FINISH 2 - DATE BLUEPRINT
| $ ra Sole den led — У соо нете Со. |
E [Ae аа bowl 1g, dees | MOMENTARY SWITCH | 92/18-0U
- CH-188(4-78)
2.200 [55.88]
CD
60.003 HOLE 2 PL [95.16]
0.840 [21.34]
4
HOUSING, STEEL
32] -— a
0.170 C4
u
—| 1180 [25.97]
1.750 [44.45] 0.830 mo
Y
|
PLUNGER BUTTON —m| |-=— 0.130 [3.30]
BLACK PLASTIC
(a)
+
Revision Control Record
Description of Change
ECN No,
> “
NOTES
00857
12/8/00
NOTES:
1. ALL STEEL PARTS PLATED
и #5 TERMINAL SCREWS
2. ALL DIMENSIONS ARE REFERENCE ONLY
SEOANE
an default tol
lerancas
2place Decimal Dimensions +- 02°
= ue Decimal Dimensions
>: ar Dimensions +18
ers Refer to equivalent Evan Dimension 1 Tee
tojerances
Dimensional Units All dimensions are expressed in Inches
wxcopt those shown ih brackets (00) are expressed in
millimaters
Unioss нае specically notad, the following
o INFORMATION Engihééring Evamding, and the
Maraton
DESIGN CONTROL
referencing this drawing to assure that ihe noted design evi
with
(Master Drawing). This Is A NOM-CONTROLLED DOCUMENT unless.
othernise specifically noted
contained herein, Ia iat Cola Herzas
Doma arel my Ot be diciabes, Te produced, oF In any other
+ 05" Way transfarred or comunicated to any party without the
Harte Company. El
N la the responsisity of the individual using)
fhe revision level of the Controlled et ©
Hey for 9pecial Characteristics:
Critical Characterlstlc, relating to Safety andior
Regulatory Compliance
significant Characteristic relating to Process Control
(SPC)
Centrol Dimension relating to Farm - Fit - Fon
as né Ey Cale Harses Company and/o
Cole Hersee Co.
20 01d Colony Ob South BO ma 02427
- Phun: B4T.984. 2100
Description: HORN BUTTON SWITCH
¿de aren Lis stort Mo =Non-Tolwanced Reference DO NOT SCALE ap Special specifiond Draw Current Rev.
ension, shown far clarification purposes only. reproduction Part No,;
uo cen 1:4 [ame RW om ватт nee NA |Pg.1of1] 96101 A
2 ol | 96102
31,75 1250 5 mien
- 44.06 1.735
UNIVERSAL HORN BUTTON ‘
SWITCH
METRIC
| DO NOT SCALE
LEY WAS DATE |BY|L WAS DATE | BY MATERIAL 1 ра APPRY D nm TO |
FINISH EP cole Hersee Co. DATE BLUEPRINT
TOLERANCES
SSUED ens zae| HORN BUTTON SWITCH | 96102
CH-188(4-78) a
Confidential Property of Cole Hersee
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement