Brochure: Smart Wireless Field Network Solutions

Brochure: Smart Wireless Field Network Solutions
Smart Wireless Field Network Solutions
See your plant in a whole new way
PLANTWEB®
PlantWeb’s network of predictive intelligence enables you
to detect process and equipment problems even before
they occur. So you can move from reactive to proactive and
profitable management.
TAKE BACK CONTROL WITH PREDICTIVE INTELLIGENCE
PlantWeb is the first proven digital
plant architecture, delivering the
future of process automation today.
Grown from a network of predictive
intelligence and integrated
software, PlantWeb delivers
reduced project risk and better
operations.
From measurement and control
devices to mechanical and process
equipment, you can gain access to
information you have never seen.
And not simply more data, but better
data...validated at its source to
ensure reliability.
Now, with Emerson’s Smart
Wireless solutions, the benefits
of PlantWeb can be extended to
areas that were previously out
of physical or economic reach.
With applications ranging from
Process and Asset Monitoring
to Workforce Productivity and
Business and Plant Management,
there are no limits to the benefits
Smart Wireless can deliver.
The information PlantWeb delivers
– whether wired or wireless –
will empower your staff to work
predictively, instead of reactively.
Maintenance can focus on the
repairs that are needed, instead
of fixing things that aren’t broken.
Operations can run production with
greater confidence in automation,
tuning the process for optimal
throughput, quality and availability
while reducing overall cost of
operations.
CONTROL SYSTEMS
Precision control
strategies let you tune
the process for optimal
performance.
You can finally achieve the promise
of automation...better business
results. Results you can quantify.
ASSET MANAGEMENT
Move to predictive
maintenance to improve
asset utilization and
availability.
PlantWeb now offers both wired and
wireless capabilities for even more
applications.
We’ve assembled a vast array of proof and organized it by the industries you
work in. To see the results others have attained, visit us at PlantWeb.com/OPEX
1
SMART WIRELESS
REMOTE MONITORING
Extend insight and improve
operations with wireless
applications for:
• Process and Asset Monitoring
• Workforce Productivity
• Plant Management
A secure view to remote
assets enables predictive
practices that improve
operations and maintenance.
MACHINERY HEALTH
Online monitoring of
critical assets helps ensure
reliability and avoid
catastrophic incidents.
MEASUREMENT
ANALYTICAL
Detect sensor fouling or
process variations with
time to correct.
Online diagnostics alert
you to failing sensors and
environmental risks.
SAFETY SYSTEMS
Integrated systems test all
functions of the safety loop
automatically so you know
it’s always ready.
FINAL CONTROL
Detect worn seals, stem
stiction, or process
variations that may cause
service interruption.
2
SMART WIRELESS
Emerson’s Smart Wireless solutions extend PlantWeb’s
predictive intelligence into areas that were previously out
of physical or economic reach, opening the door for new
possibilities in process improvement.
SMART WIRELESS EXTENDS THE BENEFITS OF PLANTWEB
Emerson’s Smart Wireless solutions
help you touch more of your plant
with predictive intelligence than
ever before...with an installed
cost savings of up to 90% over
wired technologies. You can
eliminate “blind spots” in your
plant where it was previously too
difficult or expensive to install wired
instruments. Remote locations,
physical obstructions, and the high
cost of engineering and integrating
the necessary technologies are
no longer the barriers they were.
Emerson Smart Wireless makes
extending your “information reach”
easy and affordable, enabling you
to unleash your imagination and
operation.
Emerson Smart Wireless seamlessly
scales and integrates with your
wired network. Self-organizing
to provide near perfect reliability,
Emerson Smart Wireless offers
unparalleled ease of use. Installing
and commissioning its open,
WirelessHART standard-based
wireless technologies can be a
snap…going from box to fully
commissioned in minutes.
Whether you want to access control
and asset management information
in the field, enhance your perimeter
security with wireless video,
provide cost-effective, secure
communications wherever your
staff moves, or enhance workforce
safety with pinpoint monitoring
of staff location, Emerson’s Smart
Wireless leverages industrial Wi-Fi
technologies and methods to help
you protect your plant and people.
Start anywhere. Go everywhere.
The Smart Wireless approach gives
you the freedom to choose your
path. You can have as much or as
little wireless as you want, where
you want. With little to no up-front
engineering and design required,
scalable architecture and easy
deployment.
Smart Wireless
90 % Savings
Over Wired Installation
Smart Wireless solutions reduce installation
costs by up to 90%, allowing you to provide
a solid ROI on your project.
0% 10%
3
100%
MOBILE WORKER
TANK LEVEL
PRESSURE
TEMPERATURE
DIAGNOSTICS
CORROSION
SWITCHES
VIBRATION
pH
PEOPLE TRACKING
MOBILE COMMUNICATIONS
VIDEO SECURITY
4
IMAGINE THE POSSIBILITIES
EXTEND THE LIFE OF ASSETS
Hidden Issue The temperature dropped below freezing in
Equipment failures and the
associated maintenance
cost time, money, and
reduce plant throughput and
availability. Small problems,
if undetected, can escalate
into big problems and cause
significant damage, turning a
small maintenance task into
major repairs, reducing asset
life or requiring replacement.
Imagine what you could do in
these scenarios:
your remote pumping station, putting your
pumps at risk.
Solution
Rosemount 648 Wireless Temperature Transmitters
provide remote monitoring to detect heater failure.
Hidden Issue A control valve’s response is decreasing or it
cannot reach a desired position.
Solution
The Smart Wireless THUM Adapter with a Fisher
FIELDVUE Digital Valve Controller can monitor
the valve’s health and alert you before it affects
the process.
Hidden Issue The bearing temperature on your motor has been
trending upward, signaling an impending failure.
Solution
Rosemount 648 Wireless Temperature Transmitters measure bearing temperature,
enabling proactive maintenance programs.
OPTIMIZE PROCESS UNIT EFFICIENCY
Hidden Issue Mineral deposits are forming in your cooling
Increasing plant efficiency
water system and reducing its effectiveness.
reduces material costs and can
Solution
Rosemount Analytical Model 6081 Wireless
increase plant throughput.
pH
Transmitters can monitor water quality,
minimize scale formation and keep your plant
at optimal efficiency.
Small increases in efficiency
can bring a substantial
improvement in plant profits.
Smart Wireless solutions
can cost-effectively enable
Hidden Issue Operations does not notice a manual valve is in
additional measurements
the wrong state.
needed to optimize plant
Solution
efficiency. These include
A Wireless Position Monitor can provide
consistent position feedback which reduces
operation delays.
points that were not possible
to monitor in the past, such as
points on moving or rotating
equipment, or points in harsh
environmental conditions.
Hidden Issue Pump performance has been slowly
degrading, resulting in reduced performance
and increased energy costs.
Solution
Rosemount 3051S Wireless Transmitters can be
used to measure suction and discharge
pressures to monitor pump efficiency.
5
MINIMIZE MAINTENANCE
Hidden Issue A difficult to reach but essential gearbox
develops a fault, requiring maintenance.
Solution
CSI 9420 Wireless Vibration Transmitters alert
you in time to schedule maintenance when it’s
most convenient and cost-effective.
Hidden Issue A filter is plugging and this could damage
the pump.
Solution
Rosemount 3051S Wireless Transmitters are used
to measure differential pressure across filters to detect plugging and provide an alert.
expensive. Most plants still rely
on preventative or reactive
maintenance practices even
Hidden Issue Water is pooling in your steam line, resulting in
a cold spot that could cause corrosion.
Solution
Rosemount 848T Wireless Transmitters
monitor the temperature profile in steam
lines, enabling you to detect trouble spots.
Maintaining plant assets is
though these practices reduce
the availability of plant assets.
Smart Wireless solutions can
help you move to predictive and
proactive maintenance practices.
MEET SAFETY AND ENVIRONMENTAL GOALS
Hidden Issue The caustic tank is about to overflow, resulting
in an environmental issue.
Smart Wireless solutions allow
Solution
Rosemount 702 Wireless Discrete Transmitters
with a high level switch can provide overflow
indication on caustic tanks to alert you to a
potential overspill.
you to wirelessly monitor safety
equipment such as eyewash
stations so that action can
be taken sooner, should an
incident occur. You can also
Hidden Issue The safety valve won’t be checked until the
wirelessly monitor readings in
next shift and your fines are increasing.
hazardous areas of your plant,
Solution
Rosemount 3051S Wireless Transmitters can
detect safety valve releases, and with frequent
monitoring this can lead to reduced fines.
reducing personnel safety risks.
Finally, wireless technology can
minimize the hazard, clean-up
and expense of environmental
Hidden Issue An eyewash station has been activated and your
releases by providing fast
emergency response team needs to be notified.
notification and accurate logging
Solution
The Rosemount 702 Wireless Discrete Transmitters
detect usage of safety equipment so you can
respond as quickly as possible.
of an environmental excursion,
should it occur.
6
MEETING THE CHALLENGE
SMART WIRELESSS DELIVERS COST-EFFECTIVE, EASY TO IMPLEMENT SOLUTIONS TO PROTECT ASSETS
ASSETS
EFFICIENCY
MAINTENANCE
SAFETY
ENVIRONMENT
Challenge
A large power company in the United States utilizes two gas-fired turbines to produce electricity for the
grid. The site includes eleven remote buildings that house water pumping and circulation equipment
serving a variety of needs of the power generation infrastructure. Since winter brings freezing conditions,
small heaters are located in each remote building to ensure the pumps operate properly. Freeze
damage of a pump system would cost $10,000 to $20,000 to repair or replace and take that pump out
of commission for up to three days. The customer wanted to find a technology to bring temperature
measurement into the control room as part of an early warning system. Wiring of these points was not
feasible, since running trays over the roads or conduit under existing structures was cost prohibitive.
Solution
We looked at various technologies and selected
Emerson…Especially important was the easy,
flexible self-organizing network that could be
installed and operational in a very short time…
this is an excellent solution that works well, is
easy to install and very easy to expand…
– Maintenance Supervisor
The customer installed Rosemount 648 Wireless Temperature Transmitters in all eleven remote
buildings around the plant. The devices then communicated through a Smart Wireless Gateway
back to the control room.
Result
Damage to the water pumping and circulation equipment was prevented by monitoring the temperature
with Smart Wireless solutions from Emerson. An early warning detection system for rapid temperature
change was achieved, at a fraction of the cost of a wired solution.
RATE-OF-RISE TEMPERATURE MONITORING CRITICAL FOR SAFETY AND PLANT PERFORMANCE
ASSETS
EFFICIENCY
MAINTENANCE
SAFETY
ENVIRONMENT
Challenge
A major chemical manufacturing company requires large amounts of chemicals to be brought onsite by
24,000 gallon capacity railcars. The internal temperature of the railcars needs to be monitored, because an
increase may indicate a hazardous reaction is occurring. Traditionally, an employee would climb to the top of
each railcar to measure and record the temperature. This was a time consuming and dangerous procedure,
especially during inclement weather. The railcars are being moved often, so there was no practical or costeffective method to continuously monitor the temperatures to ensure a reaction was not taking place.
Solution
The customer installed a Smart Wireless solution. No matter where the railcars are positioned at the plant,
a Rosemount 648 Wireless Temperature Transmitter on each car sends minute-by-minute temperature
There are savings of $14,600 per year in reduced
operation and maintenance costs, but the
incalculable savings were in safety.
– I&E Designer
readings to a central host. The wireless communications pass through a Smart Wireless Gateway and then
on to the plant’s DeltaVTM digital automation system.
Result
The Smart Wireless solution eliminated the need for manual readings. This chemical company uses the
information to improve the performance and safety of their facility. Operators are no longer required to
climb on the railcars to measure temperature, thus improving personnel safety. In this way, Emerson’s
wireless system contributes to overall plant safety, making operators aware of any unexpected
temperature rise while saving the company about $14,600 per year in reduced maintenance costs. While
the operators watch for rising temperatures, transmitter performance and diagnostic information is
available in AMS Device Manager.
7
INSIGHT FROM SMART WIRELESS SOLUTIONS PREVENTS SHUTDOWN
Challenge
ASSETS
Plugged filter detection is critical to preventing damage to pumps. Previously, the refinery was using
older generation pneumatic transmitters which required manual gauge readings to detect loss of
suction. These devices were prone to error and required extensive maintenance. The customer wanted
EFFICIENCY
MAINTENANCE
a technology to bring reliable and repeatable pressure information into the control room as an early
warning system from six locations at the refinery. Wiring the points was not cost-effective and the
customer did not want to run new instrument wiring and power lines to these pump filter applications.
SAFETY
ENVIRONMENT
Solution
Emerson delivered Rosemount 3051S Wireless Pressure Transmitters and a Smart Wireless Gateway.
The pressure transmitters were installed in the Coker Unit, monitoring all of the filter areas. The devices
communicated through the Smart Wireless Gateway back to the control room.
Result
After installation of the network, when a filter started to plug, the transmitter information was relayed
back to the legacy host which indicated an alarm. The filter unit was shut down prior to the filter
completely plugging, which would have caused a process upset, leading to a shutdown. The filter was
then cleaned and put back in a matter of hours, resulting in huge cost savings and a significant reduction
in downtime, since replacing a filter pump takes three days. Overall, the reduction in labor costs, reduced
[Insight] from predictive wireless filter plugging
alerts prevented a shutdown. Operators were
able to shut down the pump, clean the filter
and get it back on line in a matter of hours.
If the alerts were not present, the filter pump
would have been damaged and would have
needed to be completely replaced.
– Project Manager,
Major Refining Company
operating and maintenance costs, and improved throughput rate at each filter added up to a total savings
of $80,540 for the customer.
FLEXIBILITY, SCALABILITY, AND COST SAVINGS PROVIDED WITH WIRELESS TECHNOLOGY
Challenge
At a manufacturing company specializing in chemicals and specialty materials, monitoring of a high
number of pressure, temperature and vibration points was expensive when device installation and wiring
costs were taken into consideration. The customer also required that a wireless measurement solution
coexist with other wireless systems in their facility. The solution also needed to be scalable and
expandable. To help find a solution to this problem, the customer put together a cross-functional team to
evaluate and guide the adoption of wireless technology in the plant environment.
ASSETS
EFFICIENCY
MAINTENANCE
SAFETY
ENVIRONMENT
Solution
The customer installed Rosemount 648 Wireless Temperature Transmitters for profiling of plant steam
headers. Redundant level measurement on caustic tanks was done through measurements from
Rosemount 3051S Wireless Pressure Transmitters. The customer also monitored vibration of brine
centrifuges at this site using the CSI 9420 Wireless Vibration Transmitter.
Result
The conduit and wire savings justified the investment in wireless technology and allowed the customer
to measure points they historically could not access. The CSI 9420 identified centrifuge bearings
that developed lubrication problems, allowing the maintenance staff to correct the problem before
When Emerson first approached me with their
industrial wireless solution, they said ‘We’re plug
and play.’ I have to admit I laughed; nothing I’d
seen so far was that easy. But I’m a believer now.
Five minutes after installing it, the network came
to life. It’s been there ever since.
– Senior Design Engineer
permanent damage occurred. The self-organizing network provided both flexibility to work around
obstacles and the scalability necessary for adding more measurement points in the future.
8
MEETING THE CHALLENGE
GROSS OIL PRODUCTION MONITORING OPTIMIZES PRODUCTION
ASSETS
EFFICIENCY
MAINTENANCE
SAFETY
ENVIRONMENT
Challenge
The customer has several oil fields they would like to monitor more closely to optimize production. Oil and
gas companies compete for the same underground reservoirs, so it is a race to get the oil out first. Good
field monitoring is important to quickly identify anomalies in production; however, wired solutions are
expensive and hard to maintain due to the physical layout of the oil fields. Traditionally, gross production
monitoring at production headers was not made due to the cost of running wires. As a result, it sometimes
takes several days to determine what sections of the field are experiencing production losses. This
troubleshooting period is very costly, resulting in lower production and less efficient worker utilization.
Solution
The customer purchased ten Rosemount 3051S Wireless Pressure Transmitters as well as a Smart Wireless
Gateway. The 3051S pressure transmitters are installed across orifice meters placed on gross production
headers (trunk lines). These gross production headers have 15 to 25 wells flowing into them. The 3051S
pressure transmitters are also used to monitor gauge pressure on these same headers. The devices
connect to a PC through the gateway that is integrated into a historian used to capture the production
information and send it to site operators and corporate management facilities.
Result
Production trends are developed for these headers and a quick check of the header production in the
morning can identify major production shortfalls. Operators can be sent out to determine the cause of
these shortfalls immediately. With wireless monitoring of gross production headers, the customer has rapid
detection of production loss, allowing operators to accurately understand how to take corrective action
and restore production much sooner than had previously been possible.
SMART WIRELESS SOLUTION INCREASES THROUGHPUT OF ROTATING KILN
ASSETS
EFFICIENCY
MAINTENANCE
SAFETY
ENVIRONMENT
Challenge
A pulp and paper mill struggled to properly control calcining in a lime kiln. To do this the customer
needed to measure the internal temperature on a rotating lime kiln. Due to the restrictions of wiring, this
measurement was inferred, decreasing throughput of the kiln.
Solution
The customer purchased two Rosemount 648 Wireless Temperature Transmitters with thermocouples
and a Smart Wireless Gateway. The customer requested shipment as soon as possible, and all items
were on site in a matter of days. The sensors were installed on opposite sides of the kiln’s mid-zone, 180
degrees apart. The temperature transmitters were mounted on a pipe that extends away from the kiln.
This installation took less than one day to complete. Temperature updates are sent to the control room
Four days after the order was placed we
could see minute-by-minute mid-zone
temperatures trending on the control system… Since the wireless system has been
installed, we can see if there’s build-up of
lime in the midzone area. Overall, we have
improved operation of the lime
kiln, and increased throughput by 5%.
– Pulp Mill Leader
9
through the gateway.
Result
Since the installation, the mill is enjoying improvement of throughput with this kiln. The inferred
temperatures were found to be off by 350° F. The Smart Wireless solution circumvented the constraints of
the rotating kiln and made the measurements possible.
ENVIRONMENTAL COMPLIANCE SIMPLIFIED WITH SMART WIRELESS SOLUTIONS
Challenge
Many midstream gas processing facilities have compressor stations which utilize internal combustion
engines that are regulated by local environmental agencies for emissions compliance. They are required
to monitor and report the inlet temperature and differential pressure across a catalyst that burns
harmful chemicals prior to being released into the air. If they are not compliant with the environmental
regulations, they face large fines that can accumulate over time.
ASSETS
EFFICIENCY
MAINTENANCE
SAFETY
ENVIRONMENT
Solution
Emerson proposed a Smart Wireless solution to monitor the inlet temperature and differential
pressure across the exhaust catalyst. These measurements are made with the Rosemount 648 Wireless
Temperature Transmitter and Rosemount 3051S Wireless Pressure Transmitter, which report their
measurements every 15 minutes. The customer’s engineers decided they could integrate the data
with the company’s business Ethernet network through the Smart Wireless Gateway. This allowed the
company to easily log data remotely.
Result
Emerson provided a reliable and cost-effective wireless solution that reduced the total installed cost,
including wiring and labor. In this particular situation, there was a shortage of qualified electricians, so
reducing the installation time was a key benefit. By integrating the measurement data into the business
Ethernet network, environmental engineers were allowed to pull measurement data from the system to
create standard reports for the environmental agency. This reduced the amount of time spent generating
the report. Now the environmental engineers can spend more time analyzing the data to predict potential
problems, resulting in lower fines and cost-effective compliance with local regulations.
STRATEGIC PLACEMENT OF WIRELESS DEVICES SOLVES BENZENE VENTING PROBLEM AT REFINERY
Challenge
A refinery was experiencing issues with their benzene tanks venting into the atmosphere. The local
environmental regulatory agency requires the monitoring of nitrogen blanket pressure on benzene tanks
to ensure no venting has occurred.
Solution
Five Rosemount 3051S Wireless Pressure Transmitters were installed on three tanks to measure nitrogen
ASSETS
EFFICIENCY
MAINTENANCE
SAFETY
ENVIRONMENT
pressure. These were strategically installed in order to monitor the venting of benzene and to help find the
cause of the leak.
Result
The customer was experiencing unmonitored benzene venting on their tanks, and with Smart Wireless
solutions their tanks could be monitored and the data time-stamped. If venting should occur, the event
would be documented accurately. This results in a decrease of regulatory fines and better environmental
compliance.
10
MEETING THE CHALLENGE
SMART WIRELESS SOLUTIONS IMPROVE QUALITY, INCREASING PROFITABILITY
ASSETS
EFFICIENCY
MAINTENANCE
SAFETY
ENVIRONMENT
Challenge
A progressive manufacturer and fabricator of selected metal products expanded their product mix
to include a heavier and wider material that required more run-out table cooling water to maintain
the proper grain structure throughout the strip. Unfortunately, as the new product was being rolled,
the target coiling temperature could not be achieved. The mill loses profit when the wrong amount
of coiling water is used. Loss of pressure in cooling water lines results in costly production delays and
damaged product if the grease system clogs or fails.
Solution
The customer installed Rosemount 3051S Wireless Pressure Transmitters to measure flow and one Smart
Wireless Gateway. The measurements were then integrated into their host system utilizing Modbus®
We are building an infrastructure that
opens up opportunities for more applications. The result is better information from
difficult-to-reach areas of the mill, and this
is helping our personnel prevent unscheduled downtime, meet customers’ quality
requirements, and optimize productivity.
– OPERATIONS MANAGER
output from the gateway. The transmitters monitored coiling water flow in the Hot Strip Mill, cooling
water flow to work rolls in the Roughing Mill, and the pressure of the grease system. The customer also
installed Rosemount 648 Wireless Temperature Transmitters on the drains of the back-up roll bearings to
determine any increase in the inlet and outlet temperatures.
Result
It was discovered that the grease system was malfunctioning and not adequately lubricating the roll
bearings, creating downtime and impacting productivity. The ability to wirelessly monitor these points
has eliminated downtime from rolls freezing up. Wireless pressure transmitters installed on each roughing
stand ensure a practice of maintaining constant flow and pressure of coolant to the work rolls. Since the
addition of the Smart Wireless solutions, roll failures have disappeared. The additional data also decreased
the amount of out-of-spec steel that would have been sold at a lower profit. The combined benefits have
resulted in improved productivity.
PERFORMANCE AND EFFICIENCY IMPROVED ON TURBINE UNITS AT POWER PLANT
ASSETS
EFFICIENCY
MAINTENANCE
SAFETY
ENVIRONMENT
Challenge
A customer at a power plant wanted to instrument multiple points that previously were too expensive to
justify funding, in an effort to reduce downtime and improve plant performance.
Solution
Wireless devices are used to measure steam turbines, pumps, economizers, feed water heaters, boilers,
generators, air heaters and other assets. To make these measurements, the customer purchased 117 Smart
Wireless devices installed on five turbine units. The order was comprised of 56 Rosemount 3051S Wireless
Pressure Transmitters, 61 Rosemount 648 Wireless Temperature Transmitters, and seven Smart Wireless
Gateways. The data from the self-organizing network is integrated into an existing Ovation® system.
Result
The customer compared Emerson to the other vendors in ten categories. Emerson was the clear leader
in robustness, dependability, security, networking, expandability, polling rate, interface to legacy system
and operating cost. Justification for this project became very easy when the customer performed a return
on investment (ROI) calculation. Downtime was reduced by getting predictive measurements, operator
efficiency has increased and maintenance costs have decreased by eliminating operator rounds. There
are many plant performance improvements from improved reporting and increased boiler and turbine
efficiency. Total rework and waste was also reduced.
11
SMART WIRELESS VIBRATION MONITORING USED TO REDUCE ENVIRONMENTAL DAMAGE
Challenge
ASSETS
In refineries, there are parts of the plant that are hazardous. In one such area, a customer had a series of
EFFICIENCY
pumps that moved hydrocarbon-based products and needed to avoid any release of hydrocarbons into the
atmosphere. Since high vibration is an early indicator of a machine problem that can lead to emissions, the
MAINTENANCE
customer was collecting vibration data by sending plant personnel into the area. Because the area could
SAFETY
be hazardous, the customer wanted to collect this data remotely. Various permanently installed vibration
ENVIRONMENT
monitoring solutions had been explored, but none readily met the challenge. Wired vibration monitoring
systems are often an expensive and time-consuming proposition that the customer wanted to avoid.
Solution
The customer installed a network of Rosemount Wireless Transmitters and CSI 9420 Wireless Vibration
Transmitters for monitoring pump vibration levels. The monitoring solution, including the devices and
the gateway, was installed in just a few days. The information was routed back to the plant historian
for trending and the information was available to operators so the vibration levels could be monitored
throughout each shift.
Result
Our need to monitor these points costeffectively eliminated traditional wired
vibration monitoring solutions. Now we
can have information about these pumps
without getting suited up to go in and
collect vibration data.
With Emerson’s Smart Wireless solution, the customer avoided an expensive and lengthy installation
– Plant Vibration Analyst
process. The CSI 9420 enabled plant personnel to monitor the vibration levels of these assets without
having to walk into a potentially hazardous area. With the permanent installation, the data was available
more often than before. Now the customer’s vibration analysts only have to enter the area if a problem is
identified.
SAFETY IMPROVED THROUGH WIRELESS MONITORING OF SAFETY STATIONS
Challenge
At a paper mill in North America, the customer wanted to monitor eye wash and safety shower stations
in the process safety management areas. The mill wanted their operators to be able to respond quickly
to emergencies in these areas. A traditional wired solution was cost prohibitive, so an alternative wireless
solution was explored.
Solution
ASSETS
EFFICIENCY
MAINTENANCE
SAFETY
ENVIRONMENT
The customer installed five Rosemount 702 Wireless Discrete Transmitters at their site. Since the 702
can take two inputs, three of the transmitters were connected to six of the eye wash and safety shower
stations. The remaining 702 transmitters were each connected to a single station. Along with the
transmitters, one Smart Wireless Gateway was mounted on top of a five story building.
Result
The mill is now able to monitor the switches every fifteen seconds, and has the capability to time stamp the
devices to ensure each one is updating properly. Not only did this improve the overall safety of the plant, but
by utilizing a wireless solution versus a traditional wired solution, the mill was able to save nearly sixty percent
in installation costs.
12
SMART WIRELESS ARCHITECTURE
Easily extend the
benefits of PlantWeb
Our DeltaV and Ovation systems
natively support wireless
by providing the necessary
engineering capabilities to define
and manage wireless field devices
– without requiring special wireless
or communication know-how. The
system can also auto-sense the
Smart Wireless Gateway
and the wireless
devices for quick
and easy startup and
commissioning.
Comprehensive asset
management solution
for your wireless devices
and network
AMS Suite predictive maintenance
software enables you to easily
plan a secure, reliable wireless
network using online tools, while
also validating the network against
factory-recommended best practices.
Start Anywhere
Smart Wireless is not a top-down
or bottom-up model. You can
begin anywhere based on what
your highest priority needs are. Whether you start from the Field
Network to monitor plant and
process information, or from the
Plant Network to improve workforce
productivity or business and plant
management, you can seamlessly
and easily expand.
13
Scalable wireless network
that seamlessly integrates
with your wired network
Using Modbus Serial, Modbus
TCP, or OPC, Smart Wireless
integrates directly into your
existing automation architecture,
without the need for upfront
engineering, site surveys or special
commissioning. And to your
operators and maintenance staff,
each Smart Wireless device looks
and behaves like a wired one, no
matter how many you install.
Simple integration with
any legacy host for new
insight that only wireless
can offer
With the Smart Wireless THUM
Adapter, you can upgrade existing
wired HART devices already installed
in your plant to WirelessHART,
gaining wireless access to valuable
diagnostic and process data that
was previously inaccessible.
14
WIRELESSHART ™...THE INDUSTRY STANDARD
self-organizing, adaptive
mesh routing
• No wireless expertise required.
Devices automatically find multiple, efficient communication paths
• Network continuously monitors
paths for degradation and repairs itself • Adaptive behavior provides
reliable, hands-off operation and
simplifies network deployments,
expansion and reconfiguration
• Supports both star and
mesh topologies
INDUSTRY STANDARD RADIO
WTH CHANNEL HOPPING
• Standard IEEE 802.15.4 radios
• 2.4 GHz ISM band sliced into 16
radio-channels
• Continually “hop” across channels to avoid interference and increase reliability
•Frequency hopping spread
spectrum (FHSS) technology
delivers high reliability in
challenging radio environment
self-healing network
•The self-organizing, self-healing
network manages multiple
communication paths for any
given device. If an obstruction is
introduced into the network, the
device has already established paths
and data continues to flow. The
network will then lay in additional
paths as needed for that device.
seamless integration to existing hosts
• Transparent and seamless integration
• Same control system applications
• Gateways connect using
industry protocols
15
RELIABLE
•Data reliability >99%
• Channel hopping to avoid
interference
The newest version of the HART protocol, HART 7,
moves this field-proven technology into the world of
wireless communication with the introduction of the
WirelessHART standard.
•Redundant self-healing network
WirelessHART encompasses evolutionary enhancements
that build on the solid foundation of HART technology
used in more than 24 million installed devices worldwide.
WirelessHART is a backward compatible, cost-effective,
common sense approach to wireless communication
that supports industry requirements for a Simple,
Reliable and Secure wireless communication technology.
WirelessHART complements, but does not replace, wired
HART technology, providing an additional capability that
can benefit both existing wired applications and new
monitoring and control applications.
•Robust, multi-tiered, always-on security
The new WirelessHART standard was developed under
the guidance of the HART Communication Foundation
(HCF) through the combined, cooperative efforts of HCF
member companies, leaders in wireless technology and
the input of industry users.
Easy Installation & Commissioning
Easier than traditional 4-20mA wired installations…
Same tools and know-how, but with no wires!
4-20mA
WirelessHART
Plan cable runs
& junction boxes
Locate wireless devices
SECURE
• Device authentication and passwords
•Industry approved data encryption
SIMPLE
• Easy set-up of HART® network and devices
•Seamless integration to existing hosts
•Self-organizing, adaptive network
Standard specifications
Attribute
Radio Standard
IEEE [email protected]
Frequency Band
2.4 GHz
Frequency
Management
Frequency hopping on
a per packet basis
Power
Battery Powered 1-10 years depending
on implementation
Topologies
Mesh
Star
Combined Star & Mesh
Number of
Devices
Limit not specified.
Number of devices
will depend on
the application
requirements
and any gateway
constraints
Based on
Industrial
Standards
HART - IEC 61158
EDDL - IEC 61804-3
Radio & MAC - IEEE
802.15.4(TM)2006
Burst Rate
Adjustable rate: 8
seconds to 1 hour
Install gateway
Install I/O modules
Add devices to network
Install cable &
make connections
Commission device
Commission device
DESCRIPTION
16
AMS® SUITE: INTELLIGENT DEVICE MANAGER
comprehensive asset management
solution for your wireless devices
and networK
Smart wireless network management capabilities
•Easy planning for secure, reliable wireless network using
online tools
Software Benefits
• Validate the network against factory-recommended best practices
• Common interface for easy access to
predictive diagnostics from HART®,
FOUNDATION™ fieldbus, and wireless
devices
•Identify, troubleshoot and resolve
device problems before they cause
a plant upset
• Seamless integration with DeltaVTM ,
Ovation® and Smart Wireless Gateway
•Based on standards: HART,
FOUNDATION fieldbus, OPC, XML,
Predictive DiagnosticS
•Real-time device information allows plant staff to respond
faster and make informed decisions
•Achieve faster startup and increased availability through
more cost-effective maintenance and improved device
performance
•Capture stranded and advanced diagnostics when used
with the Smart Wireless THUM™ Adapter
Web Services, and WirelessHART
Easier Configuration
•Streamline wireless device configuration
•Confirm, compare or change configurations from the
maintenance shop or control room
•Increase safety by eliminating trips to hazardous or difficult
to reach areas
AMS Suite: Intelligent Device Manager
powers PlantWeb through predictive
and proactive maintenance of intelligent
field devices to improve availability and
performance.
Streamlined Calibration
•Calibration management ensures devices are accurate and
reduces process variability
• Electronic documentation streamlines audits and provides
easy access to calibration records
Automated Documentation
•The Audit Trail option automatically records all device
activities, making it easy to meet regulatory compliance
•Link device database to other documentation, such as
manuals and support websites
17
SMART WIRELESS GATEWAY
FLEXIBLE CONNECTIVITY OPTIONS AND
EASY DEVICE CONFIGURATION
HOST INTEGRATION WITH DELTAV™ AND OVATION®
•Gain real-time
information on
process and assets
with intuitive
operator interface
•Native interface
between control
system and gateway
DEVICE SPECIFICATIONs
• Burst rate: User Selectable 8,
Legacy integration
•Smart Wireless Gateway connects legacy hosts, Serial
Modbus®, and Ethernet or OPC output
16, 32 second or 1 to 60 minutes
•Network Size: Up to 100 devices with
8 second burst rates
• Output: Ethernet, Modbus, OPC
•Approvals: FM, CSA, ATEX, IECEx
Complete Asset management with
AMS Device Manager
•Manage predictive
diagnostics from
wired and wireless
field devices to
identify problems
before the process
is affected
•Streamline wireless
device configuration
through Smart Wireless Gateway
OTHER INTERFACES
• Web interface and AMS Wireless Configurator are
standard with every gateway for set-up and initial
configuration of wireless devices
•Data historian connectivity for documentation and
compliance information
18
SMART WIRELESS THUM™ ADAPTER
unleash the full potential of your
hart devices
ENABLE ENHANCED VALVE CAPABILITIES
•Online, in-service valve testing
•Monitor alerts such as travel deviation, supply pressure,
and electronics health
DEVICE SPECIFICATIONS
•Trend actual valve positions
•Approvals: FM, CSA, ATEX, IECEx
• Input: Either 2 or 4 wire HART 5.0 or
newer device
•SmartPower™: Power scavenging
technology (no battery required)
Gain Access To Advanced instrument Diagnostics
•Rosemount 3051S with Advanced Process Diagnostics
•Micro Motion Coriolis Meter Verification
•Rosemount Radar Echo Curve
•Rosemount Magnetic Flow Meter Verification
Efficiently Gather Data From Multivariable Devices
•Rosemount 3051SMV MultiVariable™ Mass Flow Transmitter
•Rosemount 3300 and 5300 Radar Level Transmitters
•Micro Motion Coriolis Meters
•Rosemount Vortex Flowmeters
MAKE ANY HART DEVICE WIRELESS TO ENABLE NEW
MEASUREMENT POINTS
•Pressure
•Flow
•Temperature
•Valves
•Level
•Liquid and Gas Analytical
REMOTELY MANAGE DEVICES AND MONITOR HEALTH
•Reduce troubleshooting time
•As found, as left data
•Calibration tracking
19
SMARTPOWER™ INNOVATION: INTRINSICALLY SAFE
Engineered FOR SAFETY, Long Life,
and ease of use
Smartpower solutions power module
•The only power solution optimized for both user and
process safety
•Intrinsically safe power module allows field replacements
without removing transmitter from the process, keeping
personnel safe and reducing maintenance costs
•Integral, short circuit protection delivers a safe and proven
power solution
POWER MODULE
SPECIFICATIONS
•Approvals FM, CSA, ATEX, IECEx
Intrinsically Safe
EASY TO USE
• Short circuit protection
• Installation practices require no special training
• Keyed connection
•Keyed connection eliminates the risk of incorrect installation
•No need to handle individual battery cells that can be misplaced or installed incorrectly
RELIABLE
• Advanced power technology and circuitry design provide
robust power solution for the process industry
•Contains two lithium-thionyl chloride battery cells which
have the highest energy density, shelf-life, and working
temperature range available
•Casing design creates a water-tight seal for the power
module and provides reverse polarity protection
20
ROSEMOUNT 3051S WIRELESS SERIES OF INSTRUMENTATION
Scalable Pressure, FLOW, AND LEVEL
Solutions DELIVER Better Efficiency
and More Productivity
INNovative scalable platform
•The Rosemount 3051S is the world’s
first scalable platform that provides
a foundation for integrated pressure,
flow, and level solutions
•Allows you to customize performance,
functionality and process connections
for your application
• Approvals: FM, CSA, ATEX, IECEx
• Power Module life:
1 minute burst rate – 10 years
•Four user configurable alerts for
advanced process monitoring
•Available with aluminum or SST housing
• Calibrated DP spans from 0.1 inH2O
to 2000 psi (0,25 mbar to 140 bar)
•10-year stability
•10-year Power
Module life
COS T
•Reference accuracy: ± 0.025% of span
•12-year limited
warranty
ACCUM ULATI V E M A I N TE N A N CE
PERFORMANCE LIMIT REACHED (CALIBRATION REQUIRED)
Typ
ica
l
• Stability: ± 0.2% of URL for 10 years
Maintenance-free preformance
PERFO RM A N CE D RI F T
DEVICE SPECIFICATIONS
0 YEARS
w
Flo
sic
for
as
a
l
r
C
Ult
ra,
Ult
Base
Performance
5
10
• Calibrated pressure spans from 0.3 to
10,000 psi (20,7 mbar to 689 bar)
INSTALLATION-READY PRESSURE, FLOW, AND
LEVEL SOLUTIONS
• Standardize on compact, rugged and versatile platform
with the Coplanar™ design
• Accelerate start-up with seamless integration of flanges,
manifolds, diaphragm seals and flow elements
• Reduce maintenance and enhance safety with direct
mount capabilities
21
Industry leading capabilities
deliver robust solutions to meet
your application needs
minimize maintenance
• Monitor DP across filters
• Upgrade pneumatic
transmitters
Monitoring
filter DP
• Automate
clipboard
rounds
Integrated Pressure
Solutions
Integrated Liquid
Level Solutions
Extend the life of assets
• Inlet/outlet pump pressure
Inlet / Outlet
Pump Pressure
• Compressor suction line
• Gage replacement
Integrated Orifice and
Annubar® DP Flowmeters
increase efficiency
• Trunk line flow monitoring
Trunk line flow
monitoring
• Measure pump efficiency
•Gage replacement
SAFETY and ENVIRONMENTAL
• Redundant level measurements
• Safety valve release tracking
• Nitrogen blanket tank pressure
Redundant Level
Measurement
22
ROSEMOUNT 848T WIRELESS TEMPERATURE TRANSMITTER
Efficiently access more
temperature measurements for
high density applications
Process Monitoring
• Tank profiles • Rotating lime kilns
• Finished goods storage
• Reactor profiles
• Distillation column profiles
• Turbines
Distillation
Column
Profile
DEVICE SPECIFICATIONS
• Four independently configurable
input channels that support
thermocouple, RTD, millivolt, ohm
and 4 – 20 mA inputs
•Reference accuracy:
± 0.3°C (± 0.54°F) PT100 @ 20°C
• Stability: ± 0.15% of reading or
0.15°C for 24 months
Asset Management
• Bearings on motors, fans,
pumps and compressors
• Approvals: FM, CSA, ATEX, IECEx
• Lube oil • Power Module Life:
• Heat exchangers 1 minute burst rate – 4 years
• Steam traps
10 minute burst rate – 10 years
•Eight user configurable alerts for
•Boiler and furnace
tube skin
advanced process monitoring
Compressor Station:
Bearings and Emissions
• NEMA 4X, IP66 housing allows
installation in harsh process
environments
Environmental Applications
• Emissions monitoring on compressors, motors and turbines
• Effluent temperatures
23
ROSEMOUNT 648 WIRELESS TEMPERATURE TRANSMITTER
installation-ready wireless
temperature solutions deliver
reliable measurment
Complete Temperature Solutions
•Complete transmitter, sensor and thermowell
assemblies
•Factory tested
and calibrated for unmatched
performance and reliability
Rosemount SENSOR PORTFOLIO MEETS WIDE RANGE
DEVICE SPECIFICATIONS
OF APPLICATION REQUIREMENTS
• Reference accuracy: ± 0.23°C
(± 0.41°F) PT100 @ 20°C
• Stability: ± 0.3% of reading or 0.3°C for 24 months
•Approvals: FM, CSA, ATEX, IECEx
General Use Sensors and Thermowells
•English and metric thermocouple and RTD offering
•Wide variety of thermowell styles
• Power Module Life:
1 minute burst rate – 8 years
10 minute burst rate – 10 years
•Transmitter-Sensor Matching
for improved accuracy
• Four user configurable alerts for
advanced process monitoring
•5-point calibration
• Available in aluminum and SST housing
Application & Industry Solution (AIS) Sensors
•Rosemount 1075 high temperature sensor
•Rosemount non-intrusive pipe clamp sensor
24
CSI 9420 WIRELESS VIBRATION TRANSMITTER
CSI 9420 enables wireless vibration
monitoring of any mechanical asset
Machine Applications
• Motors
• Fans
• Horizontal Pumps
• Vertical Pumps
• Cooling Tower Fans
• Compressors
• Gearboxes
DEVICE SPECIFICATIONS
Pump/Motor
Vibration
•Approvals: FM, CSA, ATEX
• Inputs: 2 single low power
accelerometers or one low power
accelerometer with embedded temperature
DETECT Typical Machine Problems
•Outputs: Overall Velocity and
•Imbalance, misalignment, looseness
PeakVue® per sensor
• Power Module Life (with two sensors):
30 minute burst rate – 3 years
60 minute burst rate – 6 years
•Rolling element bearing defects
•Gear defects
•Pump cavitation
• Available in aluminum housing
Monitoring Benefits
•Advance indication of developing problems
•Keep people out of hazardous areas
•Protect health, safety, and environment
•Monitor inaccessible equipment
•Complement portable monitoring programs
25
ROSEMOUNT ANALYTICAL 6081 WIRELESS PH TRANSMITTER
Rosemount ANALYTICAL ph
transmitters offer highly accurate
and reliable process monitoring
Wireless pH Applications
• Cooling water measurement
• Raw receiving water analysis
• Hazardous areas monitoring
• Effluent / waste water monitoring
•Environmental monitoring
DEVICE SPECIFICATIONS
Compatible with existing
Rosemount Analytical pH Sensors
for wide application coverage
•Approvals: FM, CSA, ATEX
•Optimum versatility for various
mounting options
•Accuracy: ±1 [email protected] 25°C ± 0.01 pH
•Enhanced performance and increased life
•Maximum chemical and environmental
resistance
•Embedded smart sensor technology
• Power Module Life:
1 minute burst rate – 3 years
•Repeatability: ±1mV @ 25°C ± 0.01 pH
• Intrinsically safe
• Two-line character display
• Two point calibration
•Automatic temperature compensation
•Cast aluminum enclosure:
NEMA 4X (IP65)
Applications BENEFITS
• High accuracy and reliability for monitoring applications
• Continuously monitor sensor performance through
intelligent diagnostics
• Eliminate cable runs to transmitters
26
WIRELESS DISCRETE SWITCH AND POSITION TRANSMITTERS
Topworx 4310
Wireless Position
Monitor
Fisher® 4320
Wireless Position
Monitor
Rosemount 702
Wireless Discrete
Transmitter
The TopWorx 4310 Wireless Position
The Fisher 4320 Wireless Position Monitor
The Rosemount 702 Wireless
Monitor can detect linear and rotary
can detect linear and rotary movement
Discrete Transmitter takes a variety
movement using non-contact
using non-contact technology. It can
of non-powered switch types such as
technology with limit switch feedback. It
provide both % of span feedback like a
pressure, flow and level switches as
can be used to monitor the on/off status
position transmitter and on/off or open/
input. It has single or dual channel
of equipment such as valves, sliding
closed feedback using two limit switches.
capacity which cost-effectively
stem regulators, displacement and float
It can be used to monitor equipment
enables access to discrete points
level sensors, relief valves, and many
such as valves, sliding stem regulators,
that are not connected to the control
other types of equipment.
displacement and float level sensors, relief
system due to wiring costs and lack
valves and many other types of equipment. of I/O.
Device Specifications
Device Specifications
• Input – rotary or linear movement
• Two limit switches (soft switches –
no contacts)
• Approvals: FM, CSA, ATEX, IECEx
• Power module life:
1 minute burst rate - 8 years
Optional module - 10 years
• Engineered resin housing, designed
for use in higher chemical
concentrated locations
27
• Input – rotary or linear movement
• Position transmitter (% of span) plus
two limit switches (soft switches –
no contacts)
• Approvals: FM, CSA, ATEX, IECEx
• Power module life:
1 minute burst rate - 8 years
Optional module - 10 years
• Engineered resin housing, designed
for use in higher chemical
concentrated locations
DEVICE SPECIFICATIONS
• Input – Two single pole single throw
switches or one single pole double
throw switch
• Approvals: FM, CSA, ATEX, IECEx
• Power Module life:
1 minute burst rate – 8 years
10 minute burst rate – 10 years
• Available in aluminum and SST housing
Discrete solutions
to meet your
Application Needs
% of Span
Pump
Protection
Overflow
Detection
Valve
State
Control Valve Applications
Pressure, level and flow switch applications
•Valves with only an I/P transducer installed
• DP across filters
• Pump protection
•Valves controlled with a local pneumatic controller
• Hydraulic system pressures
• Hi/Low alarms
•% of span plus on/off or open/close
• Overflow detection
Manual Valves
Conveyor Applications
•Reduce manual verification
•Belt break detection
•Incremental valve state information
•Faster response versus manual monitoring
Quarter Turn Applications
Safety and Environmental applications
• Valves with only a solenoid installed
• Safety showers
• Hazardous spill prevention
•Independent feedback of on/off or open/closed status
• Eyewash stations
• New environmental regulations
Regulator Applications
•Travel limit detection
28
Smart Wireless Best Practices Overview
All wireless field networks are easier and less costly to install than traditional wired systems, simply because they’re wireless. But not all
wireless networks are created equal. Self-organizing networks are a proven wireless solution for the process industry, in part because
they’re so easy to plan, commission, and install. Unlike other wireless field network solutions, such as line-of-sight or point-to-point
networks, self-organizing networks don’t require detailed site surveys or specialized equipment to implement. They’re also much
easier to expand. Planning, in advance and for the future using best practices, is key to successful implementation.
Scope the Project
Every process facility in every industry is different in design, but there are many
common features that allow us to apply best practices for network design.
For a large facility such as a refinery or chemical plant, the network should be scoped
to a single process unit. For vertically arranged facilities such as power plants or
factories, the self-organizing network should be scoped to a single floor.
Plot the Devices & NeTwork Connections
Emerson’s AMS Device Manager with the AMS Wireless SNAP-ON™ application
includes tools to help you easily plan and incorporate best practices into your design.
Instead of needing an in-depth site survey, you can upload an image of the plant into
the application to plan the wireless network.
The next step is to identify all the Smart Wireless solutions available in a single process
unit. You can simply drag and drop devices and gateways on the plant image. Emerson
has developed guidelines to help you design a robust self-organizing network and the
AMS Wireless SNAP-ON application will validate your network against best practices.
Place the Smart Wireless Gateway
In small networks, the Smart Wireless Gateway should be located in the center of
the network. The Smart Wireless Gateway has many integration options including
Ethernet, Modbus, and OPC. For large networks or applications that require the Smart
Wireless Gateway to be mounted inside a control room or rack room with a remote
antenna, it is best practice to build the initial self-organizing network around the
location of the Smart Wireless Gateway. Then the network can be expanded to reach
remote areas of the process unit. These practices will provide a solid foundation on
which to expand your network.
29
Smart Wireless Resources
Emerson offers a variety of resources
to ensure that Smart Wireless solutions
provide you with optimal results:
PlantWeb University Wireless Courses
Emerson’s online wireless courses at PlantWeb University are fast, free and will teach
you everything you need to know about taking your process or plant wireless – from
security and power management to implementation considerations and typical use
cases. Get started today at PlantWebUniversity.com.
Smart Wireless Website
Visit us at www.EmersonProcess.com/SmartWireless for information on:
• Wireless Applications • Technology & Products
• Getting Started
• News & Resources Industry Experts
While our wireless architecture and applications are designed for ease of engineering,
installation, and use, we also offer a broad range of services to help you get up and
running quickly – and make the most of wireless technology. Our wireless experts
ensure that your business needs are met and help you decide and implement the best
combination of wired and wireless technologies and products to meet your goals.
Emerson also offers SmartStartSM Services, which include on-the-job training in
network fundamentals, basic operation and troubleshooting. Our skilled technicians
will provide training on how to use the equipment correctly, perform routine
maintenance, and diagnose and resolve any potential issues.
For more information About
For a list of local locations in
Wireless, contact your local
the emerson Global network,
emerson representative today!
visit emersonprocess.com
30
For more information, visit us online at www.EmersonProcess.com/SmartWireless
The Emerson logo is a trademark and servicemark of Emerson Electric Co. PlantWeb, DeltaV™, Fisher®, Micro Motion®, Rosemount®, Annubar®, Ovation®, and AMS® Suite, are marks of one of the Emerson Process Management family of
companies. All other marks are the property of their respective owners.©2008 Emerson Process Management. All rights reserved. The contents of this publication are presented for information purposes only, and while effort has been made
to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or implied, regrading the products or services described herein or their use or applicability. All sales are governed be our terms and conditions,
which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice.
Emerson Process Management
12301 Research Blvd
Research Park Plaza, Building III
Austin, TX 78759 USA
Tel +1 512 835-2190
Fax +1 512 834-7600
www.EmersonProcess.com
00803-0100-6129 Rev AB 2/11
MC - 001066, 2/11
D351571X012
Emerson Process Management
Blegistrasse 23
P.O. Box 1046
CH 6341 Baar
Switzerland
Tel +41 0 41 768 6111
Fax +41 0 41 768 6300
Emerson Process Management
Asia Pacific Private Limited
1 Pandan Crescent
Singapore 128461
Tel +65 6777 8211
Fax +65 6777 0947
[email protected]
Emerson FZE
P.O. Box 17033
Jebel Ali Free Zone
Dubai, UAE
Tel +971 4 811 8100
Fax +971 4 886 5465
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement