Siemens 49EC14JB251409R Clamshell Enclosure Instructions

SIEMENS
For replacement parts information or an application
guide, visit our website at www.usa.siemens.com
or contact your local Siemens sales office.
E87010-A0142-T003-A4
Instructions
Listed Ind
Cont Eq
A163
January, 2016
Supersedes Issue of
April, 2015
LR6535
Size 4 Clamshell Enclosure
Cat. No. 49EC14JB251409R
E n c l losure
o s u r e C oCover
v e r w i thwith
O /LL O/L
R e s eReset
t
Enc
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR
VARIATIONS IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE
CONTINGENCY TO BE MET IN CONNECTION WITH INSTALLATION,
OPERATION OR MAINTENANCE. SHOULD FURTHER INFORMATION
BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE WHICH ARE
NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERREDTO THE LOCAL SIEMENS SALES
OFFICE.
THE CONTENTS OFTHIS INSTRUCTION MANUAL SHALL NOT BECOME
PART OF OR MODIFY ANY PRIOR OR EXISTING AGREEMENT, COMMITMENT OR RELATIONSHIP. THE SALES CONTRACT CONTAINS THE
ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY CONTAINED IN
THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE
NEW WARRANTIES OR MODIFY THE EXISTING WARRANTY.
C as e
Case
Figure 1
Description
Select device by Cat. No. from Table 1, case mount in hole locations
as specified in Figure 2. Tighten all screws per torques specifications
included with devices. If a pilot device is required, assemble and wire
according to the instructions provided with each pilot device kit.
When the O/L Reset is not needed, remove and replace with a
NEMA 1 hole plug 49MZPB2.
Contents of kit: (1) enclosure case, (1) enclosure cover, (1) Reset
Button Assembly Kit, and miscellaneous self-tapping screws.
Hazardous voltage.
Can cause death, serious personal
injury, or property damage.
Disconnect power before working on
this equipment.
Catalog
Number
Mounting
Hole
Location
Mntng. Screw
Schedule by
Hole Location
Self Tapping
Torque
Mounting
(in-lb)
Screw
14 H,I
A
A, B, C
1/4-20 x 5/16
40J
B
10-32 x 5/16
14J
C
F, G, H, I, J, K
L, M, N, O
22H, I
D
P, R
8-32 x 5/16
H1, H2
10-32 x 1/2
22J
E
30C, D, E (1 Winding)
F
30F, G (2 Windings)
G
LEN00C
H1
LEN00D
H2
CLM0F
I
KT*050
J
KT*100
K
KT*150
L
KT*200
M
KT*250
N
KT*300
O
3RH
P
49MAFH2
R
20
Plus Flat Washer
1/4-20 x 3/4
D, E
Plus Flat Washer
Table 1
Siemens Industry, Inc. 5300 Triangle Parkway, Norcross, GA 30092
35
A5E31166531A-003
35
Instructions
Siemens Industry,Inc. 5300 Triangle Parkway, Norcross,GA 30092
For replacement parts information or an application
guide, visit our website at www.usa.siemens.com
or contact your local Siemens sales office.
A5E31166531A-003
">