OM13054 Web
LPC-Link 2 :: NXP Semiconductors
Page 1 of 1
Global / English
■ You are not logged in
■ Login
■ Register
LPC-Link 2
Demo board description
LPC-Link 2 is a stand-alone debug adapter that can be configured to support various development tools and IDEs by downloadable
Available firmware images include:
J-Link by Segger
Code Red Technologies Redlink
The order code for this board is OM13054
■ Compatible with the LPCXpresso-IDE and Code Red Technologies Red Suite via the Redlink interface
■ Compatible with tools/IDEs that support the Segger J-Link via downloadable firmware image.
■ Compatible with tools/IDEs that support CMSIS-DAP by ARM via downloadable firmware image.
Descriptive summary
LPC-Link 2 stand alone debug adapter.
The LPC-Link 2 is the latest addition to the LPCXpresso development platform. It is an extensible, stand-alone debug adapter, that can be
connecter to virtually any development board, and that support a broad variety of development tools and IDEs via downloadable firmware
The LPC-Link 2 includes a standard 10-pin JTAG/SWD connector; a 20-pin JTAG/SWD/ETM connector; and analog, digital and serial
expansion headers, making it a highly extensible platform.
Available downloads
Configuration tool for LPC-Link 2.
LPCXpresso - Information about the LPCXpresso platform.
LPCXpresso Forums
Download the LPCXpresso IDE
All information on this product information page is subject to the subsequent disclaimers:
■ General product disclaimer
■ Quality and reliability disclaimer
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF