x National Rule VOC Chart

x National Rule VOC Chart
Spies Hecker® VOC Compliance Chart
US National Rule for Automotive Refinishing - Effective 01/11/1999
Surface Preparation
Permanent® Silicone Remover 7010 Slow (in a spray bottle)
Permahyd® Plastic Cleaning Paste 7081
Permahyd® Silicone Remover 7085 (in a spray bottle)
Permahyd® Silicone Remover 7085 (Aerosol)
Permaloid® Silicone Remover 7087 (Aerosol)
Permahyd® Silicone Remover 7096 (in a spray bottle)
Priomat® Plastic Reducer 8581
Remarks
6.2
0.1
1.5
No Surface Preparation limits are set forth in the National Rule.
Check local Surface Preparation regulations for limits.
0.2
7.1
Description
Pretreatment VOC Limit = 6.5 lbs/gal (780 g/L)
Priomat® Primer 3255
Priomat® Primer 3255 (Aerosol)
Priomat® Wash Primer 4075
Priomat® 1K Primer Surfacer 4085
Priomat® 1K Primer Surfacer 4085 (Aerosol)
Primers/Primer-Surfacers VOC Limit = 4.8 lbs/gal (580 g/L)
Permahyd® 1K Productive Primer Surfacer 4100
Permasolid® EP Primer Surfacer 4500
Permasolid® HS Premium Surfacer 5310
Permasolid® HS Premium Surfacer 5310
Permacron® 2.1 VHS Surfacer 5150
Applied VOC
lbs/gal
Compliant Rules
Description
Mix Ratio
Reducer/
Additive
Hardener
Addtl Product
Max Applied
VOC (LE)
lbs/gal
Remarks
+50%
Aerosol
1:1
+50%
Aerosol
N/A
N/A
4076
N/A
N/A
8580, 3363, 3365
N/A
N/A
8580, 3363, 3365
N/A
N/A
N/A
N/A
N/A
N/A
6.5
EXEMPT
6.5
6.5
EXEMPT
+5-10%
3:1+25-30%
4:1+0-10%
7:1+10-20%
2:1 5 + 5-10%
N/A
4501
3307, 3309, 3310, 3315, 3320, 3325
3220, 3230, 3240
3220, 3230, 3240
N/A
N/A
N/A
N/A
N/A
4.8
4.8
4.8
4.8
4.8
N/A
4.8
+30% 9050
4.8
9050 must be added before hardener.
N/A
+30% 9050
N/A
4.8
4.8
4.8
9050 must be added before hardener.
9050 must be added before hardener.
Permasolid® 2.1 Surfacer 5157
4:1 + 5-10%
3307, 3309, 3310, 3315, 3320, 3325
Permasolid® 2.1 Surfacer 5157 Elastified
4:1 +10-20%
3307, 3309, 3310, 3315, 3320, 3325
Permasolid® Spectro Surfacer 5400
Permasolid® Spectro Surfacer 5400 Elasticized
Permasolid® Spectro Surfacer 5400
4:1+0-15%
2:1+0-15%
7:1+25%
3307, 3309, 3310, 3315, 3320, 3325
3307, 3309, 3310, 3315, 3320, 3325
3220, 3230, 3240
6000
3363, 3365
8580, 3363, 3365
8580, 3363, 3365
8580, 3363, 3365, 5408
8580, 3363, 3365, 5408, 5409,
5410
8580, 3363, 3365, 5408, 5409,
5410
8580, 3363, 3365
8580, 3363, 3365
8580, 3363, 3365
Permasolid® Spectro Surfacer 5400 Elasticized
3:1+25%
3220, 3230, 3240
8580, 3363, 3365
+30% 9050
4.8
Permasolid® Spectro Sealer 5450
Permasolid® Spectro Sealer 5450 Elasticized
Permasolid® Spectro Sealer 5450
Permasolid® Spectro Sealer 5450 Elasticized
Permasolid® Vario Surfacer 8590
Permasolid® Vario Surfacer 8590 Elasticized
Permasolid® Vario Surfacer 8590
Permasolid® Vario Surfacer 8590 Elasticized
Primer-Sealers VOC Limit = 4.6 lbs/gal (550 g/L)
Permasolid® Spectro Surfacer 5400
3:1+20-25%
2:1+20-25%
5:1+25-30%
4:1+25-30%
3::1+5-10%
3:1+5-10%
5:1+10-20%
5:1+10-20%
3307, 3309, 3310, 3315, 3320
3307, 3309, 3310, 3315, 3320
3220, 3230, 3240
3220, 3230, 3240
3307, 3309, 3310, 3315, 3320, 3325
3307, 3309, 3310, 3315, 3320, 3325
3220, 3230, 3240
3220, 3230, 3240
5408
5408
5408
5408
8580, 3363, 3365
8580, 3363, 3365
8580, 3363, 3365
8580, 3363, 3365
N/A
15-30% 9050
N/A
15-30% 9050
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
2:1+20-30%
3307, 3309, 3310, 3315, 3320, 3325
5407
Permasolid® Spectro Surfacer 5400 w/Permacron Reducer
2:1+20-25%
3307, 3309, 3310, 3315, 3320, 3325
5407
4.6
Permasolid® Spectro Surfacer 5400 Elasticized
2:1+20-30%
3307, 3309, 3310, 3315, 3320, 3325
N/A
+0-5% 8580,
3363, 3365
+30% 9050
+30% 9050
4.6
N/A
+0-5% 8580,
3363, 3365
+30% 9050
4.6
+30% 9050
4.6
N/A
N/A
15-30% 9050
N/A
15-30% 9050
30% 9050
30% 9050
4.6
4.6
4.6
4.6
4.6
4.6
4.6
Permasolid® Spectro Surfacer 5400
3:1+40-50%
3220, 3230, 3240
5407
+20-25% 5407
+0-5% 8580, 3363, 3365
5407
Permasolid® Spectro Surfacer 5400 w/Permacron Reducer
3:1+40-45%
3220, 3230, 3240
5407
Permasolid® Spectro Surfacer 5400 Elasticized
3:1+40-50%
3220, 3230, 3240
Permasolid® Spectro Surfacer 5400 Elasticized w/Permacron Reducer 2:1
3307, 3309, 3310, 3315, 3320, 3325
+30% 9050
+30% 9050
9050 must be added before hardener.
9050 must be added before hardener.
9050 must be added before hardener.
9050 must be added before hardener.
4.6
4.6
9050 must be added before hardener.
4.6
Permasolid® Spectro Surfacer 5400 Elasticized w/Permacron Reducer 3:1
3220, 3230, 3240
Permahyd® Stonechip Protector 7100
+0-10%
Permasolid® Spectro Sealer 5450
3:1+20-25%
Permasolid® Spectro Sealer 5450 Elasticized
2:1+20-25%
Permasolid® Spectro Sealer 5450
5:1+25-30%
Permasolid® Spectro Sealer 5450 Elasticized
4:1+25-30%
Permasolid® Vario Surfacer 8590 Elasticized
3:1+20%
Permasolid® Vario Surfacer 8590 Elasticized
5:1+10-20%
Single Stage Topcoats VOC Limit = 5.0 lbs/gal (600 g/L)
Permacron® Acrylic Urethane Series 257
3:1+5-10%
2-stage Topcoat VOC Limit = 5.0 lbs/gal (600 g/L) applied as a system
Basecoats: Must be used with specific clearcoats for compliance
N/A
3307, 3309, 3310, 3315, 3320
3307, 3309, 3310, 3315, 3320
3220, 3230, 3240
3220, 3230, 3240
3307, 3309, 3310, 3315, 3320, 3325
3220, 3230, 3240
5407
+40-45% 5407
+0-5% 8580, 3363, 3365
6000
5409, 5410
5409, 5410
5409, 5410
5409, 5410
8580, 3363, 3365
8580, 3363, 3365
4.6
3307, 3309, 3310, 3315, 3320, 3325
8580, 3363, 3365
N/A
5.0
Permahyd® Hi-TEC Base Coat
+10-30%
N/A
6050, 6051, 6052
N/A
5.0
Permahyd® Hi-TEC Base Coat w/ Hardeners
Permahyd® Base Coat Series 280/285
+5-10% +10-30%
+0-15%
3080
N/A
6050, 6051, 6052
6000
N/A
N/A
5.0
5.0
9050 must be added before hardener.
9050 must be added before hardener.
9050 must be added before hardener.
9050 must be added before hardener.
9050 must be added before hardener.
Spies Hecker® VOC Compliance Chart
US National Rule for Automotive Refinishing - Effective 01/11/1999
Permahyd® Base Coat Series 280/285
+0-10%
N/A
6002
N/A
Permahyd® Base Coat Series 280/285
+5-10%
9007
+10-20% 6000 or 0-10% 6002
N/A
5.0
5.0
Permacron® Base Coat Series 293/295
+40-50%
N/A
3054, 3055, 3056
N/A
5.0
Permacron® FP2003
+15% +40-50%
3307, 3309, 3310, 3315, 3320, 3325
3055, 3054, 3056
N/A
5.0
Permacron® FP2003
+10% +45%
3220, 3230, 3240
3054, 3055, 3056
N/A
5.0
Permacron® Base Coat Series 293/295 - GMW 15406
+15% +40-50%
3307, 3309, 3310, 3315, 3320, 3325
3054, 3055, 3056
N/A
5.0
Permacron® Base Coat Series 293/295 - High Temp/Humidity
+35% +15%
N/A
Clearcoats: Must be used as a system with basecoats at/under 5.0 lbs/gal (600 g/L) 2-stage or 5.2 lbs/gal (630 g/L) 3-stage for compliance
Permacron® HS Clear Coat 8035
2:1+0-10%
3307, 3309, 3310, 3315, 3320, 3325
3056
9015
5.0
8580, 3363, 3365, 9025
N/A
5.0
Permacron® HS Clear Coat 8035 Elasticized
2:1+0-10%
8580, 3363, 3365, 9025
+15-30% 9050
5.0
Permasolid® HS Clear Coat 8035
3:1+15-20%
3220, 3230, 3240
8580, 3363, 3365, 9025
N/A
5.0
Permasolid® HS Clear Coat 8035 Elasticized
3:1+15-20%
3220, 3230, 3240
8580, 3363, 3365, 9025
+15-30% 9050
5.0
Permacron® MS Express Clear Coat 8046
Permacron® MS Express Clear Coat 8046 Elasticized
Permacron® MS Express Clear Coat 8046
2:1+0-5%
2:1+0-5%
3:1+10%
3307, 3309, 3310, 3315, 3320, 3325
3307, 3309, 3310, 3315, 3320, 3325
3220, 3230, 3240
8580, 3363, 3365, 9025
8580, 3363, 3365, 9025
8580, 3363, 3365, 9025
N/A
+15-30% 9050
N/A
5.2
5.2
5.0
3307, 3309, 3310, 3315, 3320, 3325
Permacron® MS Express Clear Coat 8046 Elasticized
3:1+10%
3220, 3230, 3240
8580, 3363, 3365, 9025
+15-30% 9050
5.0
Permasolid® Low VOC Clear Coat 8096
Permasolid® Low VOC Clear Coat 8096
3:2 + 5-15%
2.5:1 +20-25%
3307, 3309, 3310, 3315, 3320, 3325
3220, 3230, 3240
3363, 3365, 8580
3363, 3365, 8580
N/A
N/A
5.0
5.0
Permasolid® Low VOC Clear Coat 8096 Elasticized
3:2 + 5-15%
3307, 3309, 3310, 3315, 3320, 3325
3363, 3365, 8580
+15-30% 9050
5.0
Permasolid® Low VOC Clear Coat 8096 Elasticized
2.5:1 +20-25%
3220, 3230, 3240
3363, 3365, 8580
+15-30% 9050
5.0
Permacron® MS Clear Coat 8180
2:1
3307, 3309, 3310, 3315, 3320
N/A
N/A
5.0
Permacron® MS Clear Coat 8180 Elasticized
2:1
3307, 3309, 3310, 3315, 3320
N/A
+15-30% 9050
5.0
Permacron® MS Clear Coat 8180
3:1+0-10%
3220, 3230, 3240
8580, 3363, 3365, 9025
N/A
5.0
Permacron® MS Clear Coat 8180 Elasticized
3:1+10%
3:1 w/3220, 3230, 3240
8580, 3363, 3365, 9025
+15-30% 9050
5.0
Permasolid® HS Diamond Clear Coat 8450
Permasolid® HS Diamond Clear Coat 8450 - ASAP
Permasolid® HS Optimum Clear Coat 8600
Permasolid® HS Optimum Clear Coat 8600 Elasticized
3:1+0-5%
2:1+0-5%
3:1+0-5%
3:1
3240
3240
3220, 3230, 3240
3220, 3230, 3240
8580, 3363, 3365
8580, 3363, 3365
8580, 3363, 3365, 9025
8580, 3363, 3365, 9025
N/A
+10% 9050
N/A
+15-30% 9050
5.2
5.2
5.2
5.2
See TDS 997.0 for Mixing Recommendations
Permasolid® Clear Coat Color Additive 9045
Specialty Coatings VOC Limit = 7.0 lbs/gal (840 g/L)
Adhesion Promoters
Permacron® Transparent Surfacer 8550
Permacron® Transparent Surfacer 8550
Permasolid® Vario Surfacer 8590
Permasolid® Vario Surfacer 8590
Elastomeric Coatings
Permacron® 1:1 Elastic Primer Surfacer 3300
Priomat® Elastic Primer 3304
Priomat® Elastic Primer 3304 (Aerosol)
Priomat® Elastic Primer 4190
Permacron® Matte Clear Coat Additive 8091 with 8035 Flat Finish
3:1+20-30%
4:1+ 35%
3:1+20-30%
5:1+30-40%
3307, 3309, 3310, 3315, 3320, 3325
3220, 3230, 3240
3307, 3309, 3310, 3315, 3320, 3325
3220, 3230, 3240
8580, 3363, 3365
8580, 3363, 3365
8580, 3363, 3365
8580, 3363, 3365
N/A
N/A
N/A
N/A
7.0
7.0
7.0
7.0
1:1
Ready to Use
Aerosol
Ready to Use
4:1 w/8035
3301
N/A
N/A
N/A
2:1 w/3315, 3320
N/A
N/A
N/A
N/A
+0-5% 3363
N/A
N/A
N/A
N/A
N/A
7.0
7.0
EXEMPT
7.0
7.0
3:1+5-10%
5:1+20%
3:1+5-10%
3307, 3309, 3310, 3315, 3320, 3325
3220, 3230, 3240
3307, 3309, 3310, 3315, 3320, 3325
8580, 3363, 3365
8580, 3363, 3365
8580, 3363, 3365
N/A
N/A
N/A
7.0
7.0
7.0
25ml:1 w/RTS 2k Clear Coat
N/A
N/A
N/A
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
See TDS 8092 for Mixing Recommendations
Permasolid® Matte Clear Coat Additive 8092 with 8035
Permacron® Semi-gloss Elastic Clear Coat 8070
Permacron® Semi-gloss Elastic Clear Coat 8070
Permacron® FP1004 Rally Matte Black
Fisheye Eliminator
Permacron® Antisilicone 8510
Uniform Finish Coatings
Permacron® Speed Blender 1036
Permacron® Base Coat Blender 8560
Permahyd® Blend-in Additive 9005
Permahyd® Blend-in Additive 9017
Permahyd® Blend-in Additive 9017
Permahyd® Hi-TEC Blend-in Additive 1050 or 1051
Permahyd® Hi-TEC Blend-in Additive 1050
Other Products
Permahyd® Sanding Paste 1120
Raderal® Spray Polyester 3508
Permacron® Fine Putty 7715
4:1 w/Permacron® or Permasolid® Clear Coats (RTS)
1:2 w/293/295 RTS
1:1 w/Permahyd® Base Coat Series 280/285 (RTS)
1:2 w/Permahyd® Base Coat Series 280/285 (RTS)
+50%
N/A
+10%
N/A
+5%
N/A
9016
6050, 6052
1053
N/A
N/A
N/A
Ready to Use
+5%
Ready to Use
N/A
+5% 7690 or +2.5% 9010
N/A
N/A
N/A
N/A
N/A
9520
N/A
Only compliant when used as a system with Permacron HS Clear
Coat 8035.
Only compliant when used in a 2-stage coating system.
Only compliant when used in a 2-stage coating system.
9050 must be added before hardener.
Only compliant when used in a 2-stage coating system.
Only compliant when used in a 2-stage coating system.
9050 must be added before hardener.
9050 must be added before hardener.
Only compliant when used in a 2-stage coating system.
Only compliant when used in a 2-stage coating system.
9050 must be added before hardener.
Only compliant when used in a 2-stage coating system.
9050 must be added before hardener.
Only compliant when used in a 2-stage coating system.
9050 must be added before hardener.
Only compliant when used in a 2-stage coating system.
Only compliant when used in a 2-stage coating system.
9050 must be added before hardener.
Only compliant when used in a 2-stage coating system.
Only compliant when used in a 2-stage coating system.
9050 must be added before hardener.
9050 must be added before hardener.
9050 must be added before hardener.
Spies Hecker® VOC Compliance Chart
US National Rule for Automotive Refinishing - Effective 01/11/1999
For complete product usage and mixing recommendations, see the product specific technical data sheet located on www.SpiesHeckerUSA.com.
Copyright © 2016 Axalta Coating Systems. Spies Hecker® and all products designated with TM or ® are trademarks or registered trademarks of Axalta Coatings Systems for its brands of refinish systems. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement