DQ40-ID

DQ40-ID
SELECTABLE GALLONAGE NOZZLE
Task Force Tips model # DQ40-ID QuadraFog selectable gallonage nozzle shall be supplied.
The nozzle shall be provided in a tip only configuration. The nozzle shall be capable of
producing a variety of stream patterns from a straight stream to a narrow fog or extremely wide
fog. For corrosion resistance the nozzle shall be constructed from hardcoat anodized aluminum.
The nozzle shall be configured for flow settings of 5, 10, 24 and 40 GPM at 100 PSI, have a 1"
female NPSH rigid inlet and have a twist off position for break and extend operations.
The nozzle shall be designed to accept the TFT FoamJet, FJ-DQ low expansion or FJ-MX-DQ
multi-expansion aspirating attachments. The nozzle shall have reflective labeling, fixed or
stainless steel spinning teeth, protective front bumper, laser engraved serial number and a five
year warranty.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement