jordan_66

jordan_66
CRN Registration Number Available
Air Loaded Pressure Regulators
The Mark 66 is a highly accurate and economical air
loaded pressure regulator that provides regulation
from a local station or from a remote station.
The operation of the Mark 66 requires no control
spring or pilot. Instead, a static air signal is applied to
the top of the diaphragm to determine the setpoint.
The Mark 66 has a rangeability of approximately 40:1;
the same as our pilot-type sliding gate regulator, the
Mark 67. Because of its lack of a pilot valve, the Mark
66 is not as susceptible to problems caused by dirty
service.
Our JPR regulator (see Low Flow section) is ideal for
controlling the pressure load to the top of the diaphragm.
Features
•
•
•
All metal-to-metal contacts – no gaskets or o-rings
to wear out (2"/DN50 and under)
Versatile application – use on steam, air, gas,
liquids or chemicals
Sliding Gate Seats – all of Jordan Valve's differential regulators feature advanced sliding gate seat
technology
– Straight-through flow for reduced turbulence
and quiet operation
– Short stroke for fast response and accurate
regulation
– Easily interchangeable Cv's
– Tight Shutoff
Specifications
Sizes: 1/2" through 6" (DN15 through DN150)
End Connections
• Threaded – FNPT, BSPT, BSPP
• ANSI Flanges – 150#, 300#
• DIN Flanges – PN10/16, PN25/40
• JIS Flanges – 10K, 20K
Body Materials
• Ductile Iron
• Bronze (1/2" to 2"/DN15 to DN50)
• Carbon Steel
• Stainless Steel
• Cast Iron (2-1/2" to 6" only/DN65 to
DN150)
Trim Materials
• 303SS for DI, CI, BRZ & CS body valves
• 316 for SS body valves
Jordan Valve a division of Richards Industries
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.jordanvalve.com
Mark 66 Air Loaded Pressure Regulators
The Mark 66 setpoint is adjusted by controlling the air
pressure supplied to the top of the diaphragm. This
supplied air pressure opens the valve to allow the
process media to pass through the seats. The downstream pressure is sensed beneath the diaphragm.
As the downstream pressure exceeds the setpoint,
pressure is exerted on the diaphragm which raises the
stem to modulate the seats toward the closed position.
Pressure Regulators
Mark 66 Series
Mark 66 Series Air Loaded Pressure regulator
Specifications
Cv (Kv) Values & Maximum Differential Pressures
Seat Materials
• Jorcote on SST – Standard
• Jorcote/Jordanic on SST – For severe service
• Chrome Plated SST – Optional
Diaphragm Materials
• Stainless Steel
• Jorlon
• Viton
• Buna-N
Diaphragm Case
• DI (1/2" to 2" / DN15 to DN50)
• Steel (2-1/2" to 6" / DN65 to DN150)
Dome Loading Pressure: matches body pressure
rating
Service: Steam, water, air, gas, oil, chemicals
Shutoff: ANSI Class IV
Cv*
(Kv)
2.5
2,2)
4.4
(3,8)
6.4
(5,5)
9.5
(8,2)
15
(12,9)
25
(21,5)
30
(25,8)
55
(47,3)
115
(98,9)
200
(172)
395
(339,7)
Features
Jorlon diaphragm available
for optimal performance
and long life
Valve Size
Max ∆P, PSI
Seat Material
(DN)
(Bar)
1/2" & 3/4"
SST
125 (8,6)
Jorcote
550 (37,9)
(DN15 & DN20)
1/2" & 3/4"
SST
125 (8,6)
Jorcote
550 (37,9)
(DN15 & DN20)
1" & 1-1/4"
SST
125 (8,6)
Jorcote
400 (27,6)
DN25 & DN32)
1" & 1-1/4"
SST
125 (8,6)
Jorcote
400 (27,6)
(DN25 & DN32)
1-1/2"
SST
75 (5,2)
Jorcote
325 (22,4)
(DN40)
2"
SST
75 (5,2)
Jorcote
325 (22,4)
(DN50)
2"
SST
75 (5,2)
Jorcote
325 (22,4)
(DN50)
2-1/2"
Jorcote
150 (10,3)
(DN65)
3"
Jorcote
150 (10,3)
(DN80)
4"
Jorcote
150 (10,3)
(DN100)
6"
Jorcote
150 (10,3)
(DN165)
* Low Flow Cv's (Kv's) available: reduced Cv's (Kv's) can be
placed in any size valve as long as it is a smaller value than
the standard Cv (Kv) for that particular size. In addition, the
following special low flows can be provided:
Increased sensitivity
through sensing port
Dome loading up to
maximum rating of the
valve
1.6
(1,4)
0.02
(0,12)
0.84
(0,7)
0.008
(0,007)
0.42
(0,4)
0.004
(0,003)
0.21
(0,2)
0.002
(0,002)
0.08
0.04
(0,07)
(0,03)
0.0008 (N/A in
316SS) (0,0007)
Body Rating
1/2" – 2"
• Ductile Iron* up to 600 psi (41,4 bar) @ 100°F
(38°C) and 600 psi (41,4 bar) @ 650°F (343,3°C).
• Carbon Steel* and Stainless Steel* up to 950 psi
(65,5 bar) @ 100°F (38°C) and 890 psi (61,4 bar)
@ 650°F (343,3°C).
• Bronze* up to 500 psi (34,5 bar) @ 100°F (38°C)
and 325 psi (22,4 bar) @ 500°F (260°C)
• Temperature limit of -20°F (-28,9°C) on all materials; for other temperatures consult factory
Very little droop
* Note: Double bolting is required to reach these pressures.
Consult factory for details.
•
•
Seats available in wide range
of Cvs and materials
•
Short stroke for greater
accuracy
•
-2-
2-1/2" – 6"
Ductile Iron up to 500 psi (34,4 bar) @ 100°F
(38°C) and 450 psi (31,0 bar) @ 650°F (343,3°C).
Carbon Steel up to 500 psi (34,4 bar) @ 100°F
(38°C) and 500 psi (34,5 bar) @ 650°F (343,3°C)
Stainless Steel up to 500 psi (34,4 bar) @ 100°F
(38°C) and 445 psi (30,7 bar) @ 650°F (343,3°C)
Cast Iron up to 500 psi (34,4 bar) @ 100°F (38°C)
and 250 psi (17,2 bar) @ 450°F (232,2°C)
Mark 66 Series Air Loaded Pressure regulator
Dimensions
Flanged Ends, DIN
D
Dimensions (mm)
Weight
Valve
Flange
Kgs
A1
B
C
D
Size
(PN)
(DN)
DI/BRZ CS/SS DI/BRZ CS/SS ALL ALL DI/BRZ CS/SS
15
1/4" NPT
20
B
25
32
40
50
Valve ANSI
Size Flange
10/16
65
25/40
10/16
80
25/40
10/16
100
25/40
10/16
150
25/40
C
A
A1
Flanged Ends
Dimensions (inches)
Valve ANSI
Size Flange
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
150#
300#
150#
300#
150#
300#
150#
300#
150#
300#
150#
300#
Valve ANSI
Size Flange
125-150
2-1/2"
250-300
125-150
3"
250-300
125-150
4"
250-300
125-150
6"
250-300
A1
B
C
D
Weight
Lbs
DI/BRZ CS/SS DI/BRZ CS/SS ALL ALL DI/BRZ CS/SS
9.62
9.62
4.11
4.03 1.69 7.12
9.62 10.25 4.11
4.03 1.69 7.12
9.62
9.62
4.11
4.03 1.69 7.12
9.62 10.25 4.11
4.03 1.69 7.12
7.25
7.25
4.31
4.60 2.62 7.12
8.75
7.75
4.31
4.60 2.62 7.12
7.87
—
4.31
— 2.22 7.12
8.37
—
4.31
— 2.22 7.12
8.75
8.75
4.27
4.85 2.31 7.12
10.25 9.25
4.27
4.85 2.31 7.12
10.00 10.00 4.49
4.82 2.75 7.12
10.50 10.50 4.49
4.82 2.75 7.12
Larger Sizes (Only for DI/CS/SS)
Dimensions (inches)
A
B
C
D
10.87
10.68
6.93 12.75
11.50
10.68
6.93 12.75
11.75
10.68
6.93 12.75
12.50
10.68
6.93 12.75
13.87
11.88
8.00 12.75
14.50
11.88
8.00 12.75
17.75
12.57
9.00 12.75
18.62
12.57
9.00 12.75
18
20
20
22
22
24
22
26
26
32
32
36
10/16
25/40
10/16
25/40
10/16
25/40
10/16
25/40
10/16
25/40
10/16
25/40
21
23
23
25
27
29
—
—
30
36
36
40
Weight
Lbs
160
160
180
180
210
210
300
300
244
244
104
102 43
244
260
104
102 43
244
244
104
102 43
244
260
104
102 43
184
160
109
117 67
184
160
109
117 67
200
—
109
—
67
200
—
109
—
67
222
200
108
123 59
222
200
108
123 59
254
230
114
122 70
254
230
114
122 70
Larger Sizes (Only for DI/CS/SS)
Dimensions (mm)
A
B
C
283
271
176
283
271
176
312
271
176
312
271
176
350
302
203
350
302
203
471
320
229
471
320
229
181
181
181
181
181
181
181
181
181
181
181
181
D
324
324
324
324
324
324
324
324
8,2
9,1
9,1
10,0
10,0
10,9
10,0
11,8
11,8
14,5
14,5
16,3
9,5
10,4
10,4
11,3
12,2
13,2
—
—
13,6
16,3
16,3
18,1
Weight
Kgs
73
73
82
82
95
95
136
136
Threaded Ends
Valve
Size
1/2" &
3/4"
1"
1-1/4"
1-1/2"
2"
Material
DI/BRZ
CS/SS
DI/BRZ
CS/SS
DI/BRZ
DI/BRZ
CS/SS
DI/BRZ
CS/SS
Dimensions (inches)
A
3.62
3.62
4.12
4.18
4.12
4.50
4.81
4.50
5.50
B
4.11
4.03
4.31
4.60
4.31
4.27
4.85
4.49
4.82
C
1.69
1.69
2.62
2.62
2.62
2.31
2.25
2.75
2.75
D
7.12
7.12
7.12
7.12
7.12
7.12
7.12
7.12
7.12
Weight
Lbs
16
19
18
23
18
20
24
22
26
Threaded Ends, DIN
Valve
Size
(DN)
15 & 20
25
32
40
50
-3-
Material
DI/BRZ
CS/SS
DI/BRZ
CS/SS
DI/BRZ
DI/BRZ
CS/SS
DI/BRZ
CS/SS
Dimensions (mm)
A
B
C
D
Weight
Kgs
92
92
105
106
105
114
122
114
140
104
104
109
117
109
108
123
114
122
43
43
67
67
67
59
59
70
70
181
181
181
181
181
181
181
181
181
7,3
8,6
8,2
10,4
8,2
9,1
10,9
10,0
11,8
MK66/0111/10K/AB
Mark 66 Series Air Loaded Pressure Regulator
Ordering Schematic
Model No Size
Body Mat'l
1
2
66
Model
Standard
050
075
100
125
150
200
250
300
400
600
Size
1/2" (DN15)
3/4" (DN20)
1" (DN25)
1-1/4" (DN32)
1-1/2" (DN40)
2" (DN50)
2-1/2" (DN65)
3" (DN80)
4" (DN100)
6" (DN150)
DI
BR
CS
S6
CI
Body Material
Ductile Iron
Bronze
Carbon Steel (WCB)
Stainless Steel (CF8M)
Cast Iron
1&2
PT
BT
BP
SW
I1
F1
I5
F5
I2
F2
I3
F3
ZZ
End Connections
NPT
BSPT
BSPP
FSW
125# IFE
125# FE (Except IFE)
150# IFE
150# FE (Except IFE)
250# IFE
250# FE (Except IFE)
300# IFE
300# FE (Except IFE)
Non-Standard
3&4
S3
S6
I3
I6
ZZ
Trim
303SS
316SS
303SS F/IFE
316SS F/IFE
Non-Standard
3
4
5 6
7
8
9
10
5
A
B
V
W
X
Y
6
1
2
3
4
5
6
7
8
9
11 12
13
14
15
Seats
303SST
316SST
303SS/Jorcote
316SS/Jorcote
303SS/Jorcote/Jordanic
316SS/Jorcote/Jordanic
Cv
0.21
0.42
0.84
1.6
2.5
4.4
6.4
9.5
15
Kv
0,18
0,36
0,72
1,4
2,2
3,8
5,5
8,2
12,9
Cv's (Kv's)
A
B
D
F
G
H
I
J
Cv
25
30
55
85
115
130
200
395
7&8
00
Range
None
9 & 10
S6
VI
BN
JL
DD
ZZ
Diaphragm
316SST
Viton
Buna-N
Jorlon
Separate Double Diaphragm
Non-Standard
11 & 12
MD
ED
ZZ
Actuator
For Metal Diaphragm
For Elastomer Diaphragm
Non-Standard
13 & 14
00
DZ
Double Bolting
None
Double Bolting
15
0
6
8
Z
Accessories
None
316SS Bolting
High Temperature Bolting
Non-Standard
Kv
21,5
25,8
47,4
73,3
99,1
112
172
341
Jordan Valve a division of Richards Industries
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.jordanvalve.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement