User manual | ISO Certification Document

CERTIFICATE OF APPROVAL
This is to Certify that the Quality Management System of:
Power and Signal Group
6675 Parkland Blvd
Solon, OH 44139
(Page 1 of 2; see Appendix)
has been assessed and approved by Smithers Quality Assessments, Inc., to
the following quality management system standards and requirements:
ISO 9001:2008 without Design
The Quality Management System is Applicable to:
The distribution of automotive components, including connectors, terminals, conduits,
and sensors for the transportation industry with sales & customer service support
from Balcke-Duerr-Alle 2, Ratingen, Germany 40882.
Approval
Certificate Number: 02.179.1
Original Approval:
June 28, 2002
Current Certificate:
June 5, 2014
Certificate Expires:
June 4, 2017
Form SQA-13.1b | ISO Multi-Site Sampling | Revised: 04/09/13 | (4035-Q-979, 978, 979) – Multi-Site Sampling | Current Certificate Revision Date: June 5, 2014
APPENDIX A
TO THE CERTIFICATE
OF REGISTRATION NO. 02.179.1
Page 2 of 2
SMITHERS QUALITY ASSESSMENTS, INC.
Power and Signal Group
6675 Parkland Blvd
Solon, OH 44139
Services provided by this location: Distribution
is certified by Smithers Quality Assessments, Inc. with regard to ISO 9001:2008
without design
In addition to the corporate office in Solon, Ohio, the following sites have been
assessed and found to be in compliance with the applicable requirements of ISO
9001:2008 without design utilizing a multi-site sampling approach.
Locations:
Power and Signal Group
5440 Naiman Parkway
Solon, OH 44139
Services provided by this location: Distribution, calibration and maintenance
Power and Signal Group
Balcke-Duerr-Alle 2
Ratingen, Germany 40882
Services provided by this location: Customer support, material management and
quality support
This appendix applies only to those sites listed above. As other sites are assessed and approved, or as sites
already approved are removed from active services, this appendix will be amended to show the current status.
Sites not listed on this appendix shall not be viewed as approved.
Form SQA-13.1b | ISO Multi-Site Sampling | Revised: 04/09/13 | (4035-Q-977, 978, 979) – Multi-Site Sampling | Current Certificate Revision Date: June 5, 2014

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project