null  null
CompactPCI® goes Serial!
Solutions with CompactPCI®,
CompactPCI® PlusIO and
CompactPCI® Serial
CompactPCI®Serial SBCs
CompactPCI® Serial is based on the mechanics of CompactPCI®, so it remains compatible to IEC 1101, but it only
supports modern point-to-point connections. The CompactPCI® Serial architecture, a simple star combined with a
complete mesh for Ethernet, functions without switches and bridges. There is a system slot and up to eight peripheral slots with congruent pin assignments.
G51 – 3U CompactPCI® Serial PowerPC®
Communications CPU Board
router, NAS and wireless platform with up to 8 Gb Ethernet
�P3041 Freescale™ QorIQ™ quad-core PowerPC® processor
�4 HP system master and peripheral slot
�PICMG CPCI-S.0 CompactPCI® Serial
�Up to 8 GB DDR3 SDRAM soldered, ECC
�eMMC multimedia card, mSATA card slot
�Standard front I/O: 3 Gb Ethernet, 2 USB 2.0
�Standard rear I/O: 4 PCIe®, 5 Gb Ethernet, 4 USB 2.0, 2 SATA (3 Gb)
�-40°C to +85°C with qualified components
�Compliant to EN 50155 (railways) and ISO 7637-2 (E-mark, automotive)
G22 – 3U CompactPCI® Serial Intel® Core™ i7 SBC
Core™ i7, 3rd generation
�Quad-core 64-bit processor
�4 HP system master and peripheral slot
�4 or 8 GB DDR3 DRAM soldered, ECC
�mSATA and microSD™ card slots
�Standard front I/O: 2 DisplayPorts, 2 Gb Ethernet, 2 USB 2.0
�Standard rear I/O: 7 PCIe®, 4 USB 2.0, 4 USB 3.0, 5 SATA,
�Intel® Turbo Boost, Hyper-Threading, AMT 8.0, Open CL support
G20 – 3U CompactPCI® Serial Intel® Core™ i7 SBC
Core™ i7-610E, 2.53 GHz
�Dual-core 64-bit processor
�4 HP system master and peripheral slot
�Up to 4 (8) GB DDR3 DRAM soldered, ECC
�mSATA and microSD™ card slots
�Standard front I/O: 2 DisplayPorts, 2 Gb Ethernet, 2 USB 2.0
�Standard rear I/O: 7 PCIe®, 8 USB 2.0, 6 SATA, DisplayPort®/HDMI
�Intel® Turbo Boost, Hyper-Threading, Active Management Technology
GM2/GM1 – Octal/Quad Gigabit Ethernet
Mezzanine Card
card for CompactPCI® Serial SBCs
10/100/1000Base-T Ethernet channels
�Support of full mesh and star architecture
�TCP/IP checksum offload
CompactPCI®PlusIO SBCs
CompactPCI® PlusIO SBCs (PICMG 2.30) can be used in parallel CompactPCI® 2.0 systems, with the advantage
to support a standardized rear I/O pinout. Their primary function however is to combine the enhanced speed
and data throughput of CompactPCI® Serial peripheral cards with legacy CompactPCI® peripheral cards in
hybrid system configurations.
F75P – 3U CompactPCI® PlusIO Safe Railway Computer
Intel® Atom™ E6xx, 512 MB DDR2 RAM (each) for onboard
dual redundancy
�1x Intel® Atom™ E6xx, 1 GB DDR2 for I/O
�Fail-safe and fail-silent board architecture
�Certifiable up to SIL 4 (with report from TÜV SÜD)
�Full EN 50155 compliance, -40°C to +85°C qualified
F22P – 3U CompactPCI® PlusIO Intel® Core™ i7 SBC
Core™ i7, 3rd Gen., 2.3 GHz, up to 16 Gb DDR3 DRAM (soldered, ECC)
and microSD™ card slots
�Standard front I/O: VGA, 2 Gb Ethernet, 2 USB
�Standard rear I/O: 4 PCIe®, 4 USB, 4 SATA, 1 Gb Ethernet
�2.0 to 3.0 GHz Turbo Boost, Hyper-Threading, AMT, Open CL 1.1 support
F21P – 3U CompactPCI® PlusIO Intel® Core™ i7 SBC
Core™ i7-2715QE, 2.1 GHz, up to 16 GB DDR3 RAM (soldered, ECC)
card and mSATA slots
�Standard front I/O: VGA, 2 Gb Ethernet, 2 USB
�Standard rear I/O: 4 PCIe®, 4 USB, 4 SATA, 1 Gb Ethernet
�Other I/O (onboard, side card): SDVO, HDMI/Display Port®, HD Audio, etc.
�2.0 to 3.0 GHz Turbo Boost, Hyper-Threading, Active Management Technology
F19P – 3U CompactPCI® PlusIO Intel® Core™ 2 Duo SBC
Core™ 2 Duo SP9300, 2.26 GHz, up to 4 GB DDR3 DRAM (soldered)
and microSD™ card slots
�Standard front I/O: VGA, 2 Gb Ethernet, 2 USB
�Standard rear I/O: 4 PCIe®, 4 USB, 4 SATA, 1 Gb Ethernet
�Other I/O (onboard, side card): SATA, SDVO, HD audio, USB, UART etc.
F50P – 3U CompactPCI® PlusIO MPC8548 SBC
(or MPC8543), up to 1.5 GHz
HP or 12 HP with front I/O
�Up to 2 GB (ECC) DDR2 SDRAM
�Up to 128 KB FRAM, 2 MB SRAM, up to 16 GB SSD Flash
�Standard front I/O: 2 Gb Ethernet, 2 USB
�Standard rear I/O: 4 USB, 2 SATA
�FPGA for user-defined I/O functions (option)
CompactPCI®Serial Peripheral Boards
G214 – 3U Multi-Display Controller
processor Radeon E6760, 600 MHz
SIMD engines, 480 shaders
�1 GB integrated graphics RAM
�AMD EyeSpeed, Eyefinity and HD3D technologies
�PCIe® x8 CPU interface
�Up to 6x DisplayPort® (4x DP 1.2, 2x DP 1.1a)
�DirectX® 11, OpenGL® 4.1, OpenCLTM 1.1
G201 – 3U USB 3.0 Interface
USB 3.0 host interfaces
rate up to 5 Gbit/s per direction per port
�-40°C to +85°C screened
G215 – 3U Universal Interface Board
G204 – 3U M-ModuleTM Carrier Board
M-Module™ slot
�-40°C to +85°C with qualified components
G211 – 3U Quad Gigabit Ethernet Interface
10/100/1000Base-T Ethernet channels
two redundant channel pairs
�Full-duplex or half-duplex
�RJ45 or robust M12 connectors
�1500 V isolation voltage
�-40°C to +85°C screened
G211F – 3U Quad Fiber Optics Interface
optical transceiver channels 1000Base-SX
�Alternatively two redundant channel pairs
�Full-duplex or half-duplex depending on transceiver
�-40°C to +85°C screened (without transceivers)
G301 – 3U Unmanaged 4+1-Port Ethernet Switch
Gigabit Ethernet ports on RJ45 or M12 connectors
Power over Ethernet (PoE) PSE
�LEDs for Ethernet activity
�-40°C to +85°C screened
G302/G303 – 3U 16-Port Ethernet Switches
and unmanaged versions
to 16 Gigabit Ethernet ports at rear side
�Or: 3 ports at front and up to 13 ports at rear
�Service interface via M12 connector
�-40°C up to +85°C with qualified components
G212 – 3U PCIe® MiniCard Carrier for Wireless Functions
G501 – 3U SATA HDD/SSD Shuttle
to 2 PCI Express® MiniCards (full-size)
�Optional 2 Express Cards 34 or 54
�For cards with internal PCIe® and USB interface
�For HF applications (WLAN, UMTS, GPS, GSM, HSDPA)
�-40°C to +85°C screened
G213 – 3U XMC Carrier
XMC slot (PCIe® 2 x4 links)
�Or 1 PMC slot (32/64 bits, 33/66/133 MHz, PCI-X)
�-40°C to +85°C screened
HP CompactPCI® Serial with 5 interfaces at the front
�Physical layers via SA-Adapters™
�For protocols/physical layers like RS232/422/485, HDLC,
CAN bus, binary I/O
�Standard configuration: 2 CAN, 2 UART, 1 binary I/O port (8-bit)
�Other functions via FPGA IP cores
�-40°C to +85°C with qualified components
disk drive or solid state drive shuttle
�-40°C to +85°C with qualified components
�Compliant with EN 50155
F100/G100 – CompactPCI® Serial to
CompactPCI® Interface Cards
- Replaces system slot card in CompactPCI® systems
�G100 - For operation together with F100 system slot card
for CompactPCI®
�1 PCI Express® x1 link
�-40°C to +85°C with qualified components
CompactPCI®PlusIO/Serial Systems
To package CompactPCI®, CompactPCI® PlusIO and CompactPCI® Serial boards we use enclosures and backplanes
from Schroff®. In addition to their maintenance friendly and robust architecture, 19” systems have a modular setup regarding housing dimensions, backplane sizes and pinout, PSUs and use of different mass storage devices. The
following enclosures are the basis for individually tailored system configurations.
CPCI Serial Rack – Single Euro with Conduction Cooling
standard 3U cards within CCA frames
3U backplane
�System slot left, horizontal installation
�Outline 200 mm x 350 mm x 145 mm
�4 MIL-C-38999 connectors (59 user I/O pins)
�PSU 18-32 V, 35 W
�-40°C to +85°C operating temperature
�IP65 compliant
CPCI to CPCI Serial Hybrid Rack for Single Eurocards
/ 84 HP system (incl. 1U fan tray)
�8-slot hybrid backplane
�CompactPCI® PlusIO system slot
�4 CompactPCI® Serial peripheral slots to the right
�3 CompactPCI® peripheral slots to the left
�All slots prepared for rear I/O
�250 W plug-in PSU 90-264 VAC
�44HP space for individual extensions
CPCI Serial Rack for Single Eurocards
Rack for Single Eurocards
�19“ rack-mountable
�4U / 84 HP system (incl. 1U fan tray)
�9-slot CompactPCI® Serial backplane
�System slot left
�Full Ethernet mesh
�460 W ATX PSU, 90-264 VAC
�Prepared for slim-line DVD drive
System Solutions & Application Examples
The rugged CompactPCI® Serial/PlusIO products from MEN are especially suited for transportation and other
mobile applications, e.g. for infotainment systems, as well as for mission-critical industrial systems.
RAID Storage Systems
CompactPCI® PlusIO systems are downward-compatible to CompactPCI®
2.0 and feature additional high-speed serial interfaces on the backplane.
With 4 SATA interfaces (up to 8 SATA in CompactPCI® Serial systems) RAID
systems for the storage of video data can be built very effectively. A train
can contain several (redundant) recorders typically operating 24 hours a
day. Every recorder can have a memory of several terabytes and can store
data from 20 cameras for up to 30 days.
Automatic Train Operation
Mass transit vehicles are more and more often equipped with driverless
systems to increase traffic speed and frequency, lower energy consumption, or to stop at the station precisely. ATO computers are typically based
on modular systems because they control a multitude of functions and
communicate with wayside equipment. As ATO functions are always
safety-critical, the same computer can be used to control other safety
systems of the train.
Passenger Information Systems
High-performance passenger information systems (PIS) with flexible I/O
are becoming increasingly important in trains, busses, ships and airplanes.
Using wireless functions like WLAN, UMTS, GPS, GSM-P (public) or GSM-R
(rail), all data need to be transmitted reliably and without interruptions –
even at high speeds. They provide reliable wireless communication based
on CompactPCI and rugged panel PCs.
Internet & Wireless Access Systems
Industrial internet access points can be used in passenger information
systems as content servers or multimedia access units as well as surveillance systems for the recording and management of camera data or for
ticketing. These are flexible, certified and rugged CompactPCI-based
internet and wireless access systems for extreme conditions in transportation applications.
Camera Control
CompactPCI® PlusIO and Serial systems can flexibly be populated with
standard, modified and custom cards. These systems can be extended
by additional boards or scaled with CPU cards of different performance
levels. Several independent subsystems may also find space inside a
single enclosure. Connection to IP cameras is realized via Fast or Gigabit
Ethernet, while analog cameras are typically connected via FireWire.
Key Features of CompactPCI® Serial
With CompactPCI® Serial (PICMG CPCI-S.0) the CompactPCI® architecture moves to serial high-speed interconnects. A configuration of one system slot and up to eight peripheral slots does not need switches and
bridges. Keeping the proven 19” mechanics of the IEC 1101 as well as hot-plug, the standard introduces a
new rugged connector with a signal density of up to 184 pin pairs (on 3U) and transmission frequencies of
12 Gbit/s. The system slot supports 8 PCI Express® links, 8 SATA/SAS, 8 USB 2.0/3.0 and 8 Ethernet interfaces plus signals for general system management. It is supplied with 12 V. Each peripheral slot offers 1 PCI
Express® link, 1 SATA/SAS and 1 USB 2.0/3.0 interface and supports up to 8 Ethernet interfaces to build a
full mesh. The pin assignment of the system and the peripheral slot is congruent. This way it is possible to
plug a system slot board into each peripheral slot to support symmetrical multiprocessing. Ethernet is wired
as a full mesh. Transmission is based on the proven standards for copper connections up to 10GBase-T to
allow configuration of redundant, safety-critical systems.
Key Features of CompactPCI® PlusIO
Rugged and Safe Computing with CompactPCI® from MEN
The modularity and maintenance-friendliness of the 19“ mechanics together with the robust connection
and compact Eurocard size of the CompactPCI® boards, plus hotswappability, multi-processing capabilities
and conductive cooling possibilities are the ideal basis to build and offer solutions for harsh environments
and for mission-critical applications. CompactPCI® PlusIO and CompactPCI® Serial combine all these advantages with much higher speed and data throughput using modern serial interconnects. MEN COTS and
custom boards come in 3U and 6U for operating temperatures up to -40°C to +85°C, prepared for coating,
with all components firmly soldered, using onboard FPGAs where additional flexibility is required. The
outstanding product quality is guaranteed by development and production according to market standards
like EN 50155 or DO-178, based on quality management systems ISO 9001, EN/AS 9100 and IRIS. MEN
computer systems are made in Germany on fully automated production lines supporting traceability. A well
implemented obsolescence management allows long-term delivery agreements up to 15 years and more.
ISO 9001:2008
ISO 14001:2005
EN 9100:2009
Learn more about CompactPCI®/
CompactPCI® PlusIO/ CompactPCI® Serial!
Germany, February 2014. Copyright © MEN Mikro Elektronik®. Printed in Germany. All rights reserved.
CompactPCI® PlusIO (PICMG 2.30) is downward-compatible to CompactPCI® (PICMG 2.0). It offers the
modularity, robustness and economic efficiency of CompactPCI®, adding fast serial data transfer inside the
same 19” standard environment via a different connector from 3M with 5 Gbit/s. PICMG 2.30 solely fixes
the pin assignment and the function of the free user pins of PICMG 2.0 on the J2 connector for 32-bit system slots. The pin number is sufficient for leading 4 PCI Express® x1 links, 4 SATA, 4 USB 2.0 as well as 2
Ethernet 1000Base-T interfaces to the backplane. These new serial interfaces can either be wired via a rear
I/O adapter or up to 4 new peripheral slots are added to the system backplane. These slots have identical
assignment for PCI Express®, SATA and USB. The first 2 peripheral slots support Ethernet in addition.
CompactPCI® PlusIO can be combined with existing CompactPCI® boards in hybrid systems which also
offer the possibility to integrate boards with serial interconnects beside the parallel bus-based boards – an
easy and cost-saving way to migrate to modern technologies like CompactPCI® Serial.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF