Task Force Tips Mid Matic, model # HMK-V low pressure automatic nozzle with shutoff shall
be provided. The nozzle design shall allow for straight stream through dense wide fog patterns
and be able to be flushed without shutting down. For corrosion resistance and durability the
nozzle shall be constructed from hardcoat anodized aluminum alloy, have a six (6) position
detent flow control stainless steel slide valve, a protective rubber bumper with fog teeth, stainless
steel inlet debris screen, laser engraved serial number, reflective labeling and five year warranty.
The nozzle shall comply with the current NFPA 1964 standard.
The nozzle shall have a 1-1/2" female NH inlet which allows the nozzle to swivel when
tightened, a flow range of 70-180 GPM at 50 PSI and be designed to accept the Task Force Tips
FJ-LX-HM low expansion or FJ-MX-HM multi expansion FoamJet foam attachments.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF