series2000

2000 Series Inverted Bucket Steam Trap
All Stainless Steel With 360° Connector/IS-2/TVS-4000
Steam Trapping and
Steam Tracing Equipment
For Pressures to 650 psig (45 bar)...Capacities to 1,300 lb/hr (590 kg/hr)
Description
How to Order
• A sealed, tamperproof package
• A compact, lightweight trap
• The ability to withstand freeze-ups without damage
• Exceptional corrosion resistance
• A three-year guarantee against defective materials, defective workmanship.
For a fully detailed certified drawing, refer to:
2000 Series with Standard Connector
CD #1003
2000 Series with IS-2 Conncector
CD #1113
With the 2000 Series’ 360° universal connector, you can install inverted bucket
efficiency and long service life in any piping configuration with little or no
repiping. You get the reliability of the inverted bucket operating principle, plus
all the benefits of all-stainless steel construction:
Specify:
• Model number
• Size and type of pipe connection
• Type of 360° connector (with or without strainer)
• Maximum working pressure that will be encountered or orifice size
• Any options required
Allow 2-1/2'' clearance for bolt
installation and removal.
2000 Series steam traps combine savings in three important areas: energy,
installation and replacement. The 360° universal connector provides quick,
easy in-line replacement along with all the proven advantages of inverted
bucket operation.
Allow 2-1/2'' clearance for trap
installation and removal.
E
F
Also available with optional IS-2 integral strainer connector.
Maximum Operating Conditions
Maximum allowable pressure (vessel design):
Model 2010, 2011:
400 psig @ 800°F
Model 2022:
650 psig @ 600°F
627 psig @ 700°F
600 psig @ 800°F
Maximum operating pressure:
Model 2010:
200 psig (14 bar)
Model 2011:
400 psig (28 bar)
Model 2022:
650 psig (45 bar)
C
(28
(45
(43
(41
bar
bar
bar
bar
@
@
@
@
427°C)
315°C)
371°C)
427°C)
B
D
A
Model 2011 Trap With Standard Connector
Connections
E
F
Screwed NPT and BSPT
Socketweld
Flanged (consult factory)
C
2"
WITHDRAWAL
LENGTH
Materials
Body: ASTM-A 240 Grade 304L
Internals: All stainless steel—304
Valve and seat: Hardened chrome steel—17-4PH or Titanium
Connector body (std & IS-2):
Stainless steel—304
Flange
ASTM A105 Zinc plated
D B
1/4" Plug
Options
A
• Insu-Pak™ insulation for Models 2010/2011
• Stainless steel pop drain for Models 2011/2022
• Probe connection for Models 2011/2022
• Strainer blowdown valve for IS-2 connector
• Wiggle wire
Series 2010-2022 With IS-2 Connector
2000 Series Traps With Standard Connector
Model No.
2010
Pipe Connections
360° Connector Styles
• Standard connector
• IS-2 connector with integral strainer
• IS-2 connector with integral strainer with blowdown valve
“A” (Diameter)
“B” (Height)
Specification
Inverted bucket steam trap, type ... in all stainless steel, freeze resistant,
with 360° universal connector, having continuous air venting at steam
temperature, free-floating stainless steel mechanism, and orifice at the top of
the trap.
2011
2022
in
mm
in
mm
in
mm
1/2, 3/4
15, 20
1/2, 3/4
15, 20
1/2, 3/4
15, 20
2-11/16
68
2-11/16
68
3-7/8
98
6
152
6-15/16
176
8-11/16
221
“C” (Face to Face)
2-3/8
60
2-3/8
60
2-3/8
60
“D” (Bottom to CL)
4-19/32
117
5-9/16
141
7-3/8
187
“E” (CL to Outside)
146
4-9/16
115
4-9/16
115
5-3/4
“F” (CL to Bolt)
1
25
1
25
1
Weight lb (kg)
4-1/4 (1.9)
4-1/2 (2.0)
25
7 (3)
2000 Series Traps With IS-2 Integral Strainer Connector
Model No.
2011
2022
mm
in
mm
in
mm
in
mm
in
mm
in
mm
1/2, 3/4
15, 20
1
25
1/2, 3/4
15, 20
1
25
1/2, 3/4
15, 20
1
25
“A” (Diameter)
2-11/16
68
2-11/16
68
2-11/16
68
2-11/16
68
3-7/8
98
3-7/8
98
“B” (Height)*
6
152
6
152
6-15/16
176
6-15/16
176
8-11/16
221
8-11/16
221
Pipe Connections
“C” (Face to Face)
3-1/2
89
4
102
3-1/2
89
4
102
3-1/2
89
4
102
“D” (Bottom to CL)*
5
127
5
127
6
152
6
152
7-3/4
197
7-3/4
197
“E” (Outside to Bolt)
5-1/2
140
5-11/16
144
5-1/2
140
5-11/16
144
6-11/16
170
6-7/8
175
“F” (CL to Outside)
4-5/8
117
4-13/16
122
4-5/8
117
4-13/16
122
5-13/16
148
6
152
Weight lb (kg)
104
2010
in
4-3/4 (2.2)
5-1/4 (2.4)
5 (2.3)
5-1/2 (2.5)
7 (3)
*Add 1/2" (15 mm) to “B” and “D” dimensions when optional probe connection is required.
Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit armstronginternational.com for up-to-date information.
North America • Latin America • India • Europe / Middle East / Africa • China • Pacific Rim
armstronginternational.com
2000 Series Inverted Bucket Steam Trap
All Stainless Steel With 360° Connector/IS-2/TVS-4000
For Pressures to 650 psig (45 bar)...Capacities to 1,300 lb/hr (590 kg/hr)
Model 2011 Capacity
1
2
5
3
7
10
700
500
250
Capacity lb/hr
400
150
100
#38
200
200
70
150
50
100
40
#38
R60*
70
Capacity kg/hr
Capacity lb/hr
250
400
250
7/64
200
2022 Trap
#38
300
250
100
10
2
3
5
7
Pressure, psi
100
2
5/64
150
100
70
50
5
7
10
2
5
3
7
100
2
5
3
Pressure, psi
Model 2022 Capacity
Pressure, bar
5
3
7
1
2
5
3
7
10
2
5
3
1,500
*NOTE: Because the orifice is located at the top, inverted bucket steam traps
handle dirt and scale better than other types of traps. However, in applications
where extremely dirty conditions exist, care should be exercised in the use of
all types of restricted-orifice, reduced-capacity traps.
Connectors
Besides the inverted bucket
traps, the standard connector,
IS-2 connector, and TVS-4000
connector with integral strainer
can also be used on thermostatic,
thermostatic wafer and disc traps.
500
1,000
400
700
300
250
7/64
500
200
400
#38
150
300
250
100
200
70
150
100 5
7
650
300
Capacity lb/hr
7
400
250 400
300
10
5
200
150
15
25
125
3
2
5/32 1/8
20
30
10
7
70
500
25
40
5
3
200
30
50
2
700
200
300
Pressure, bar
1
1,000
300
200
7
5
2
Capacity kg/hr
7
Capacity kg/hr
Pressure, bar
5
3
Steam Trapping and
Steam Tracing Equipment
Model 2010 Capacity
50
7
10
2
3
5
7
100
2
3
5
7
1,000
Pressure, psi
CD-3300 Disc Trap
With IS-2 Integral Strainer Connector
Options
Pop Drain for Freeze Protection
Valve
In general, a properly selected and
Retainer
installed Armstrong trap will not freeze
SS
as long as steam is coming to the
Polished
trap. If the steam supply is shut off,
Ball
a pop drain should be used to automatically drain the trap. Stainless steel
pop drain available for Models 2011
O-Ring
and 2022.
Maximum Operating Conditions
Pressure: 600 psig (41 bar)
Temperature: 350°F (177°C)
Body
Spring
Insu-Pak
Now you can insulate the in-line traps
in your plant without complicating
regular trap maintenance. Insu-Pak,
a simple reusable insulation package,
cuts the time and cost of in-field installation because it goes on in a snap. And it
comes off just as easily. The Insu-Pak
can prevent trap freeze-up when used
with a properly designed condensate
manifold. Designed for use with Model
2010 and Model 2011 traps.
Probe connections are available
for trap monitoring for Models 2011
and 2022.
Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit armstronginternational.com for up-to-date information.
Next
North America • Latin America • India • Europe / Middle East / Africa • China • Pacific Rim
armstronginternational.com
105

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project