Memorex MX5310 Operating instructions

Memorex MX5310 Operating instructions
MINI SYSTEM STEREO AM/FM
3 CD CHANGER WITH DUAL
CASSETTE RECORDER
MODEL: MX5310
BEFORE OPERATING THIS PRODUCT,
PLEASE READ THESE INSTRUCTIONS COMPLETELY
E-1
Memorex.p65
1
11/8/01, 11:11 AM
WARNING:
To reduce the risk of fire or electric shock, do not expose it is appliance to rain or moisture.
CAUTION:
Use of controls or adjustments or performance of procedures other than those specificed may result in
hazardous radiation exposure.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service personnel
The lightning flash with arrowhead symbol within an equilateral symbol, with an
equilateral triangle, is intended to alert user to the presence of uninsulated “dangerous
voltage” within the products enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenace (servicing) instruction in the literature
accompanying the appliance.
CAUTION
For Compact Disc Units only.
INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCK FAILED OR DEFEATED.
AVOID DIRECT EXPOSURE TO LASER BEAM.
E-2
Memorex.p65
2
11/8/01, 11:11 AM
IMPORTANT SAFEGUARDS
CAUTION :
•
•
•
Read all of these instructions.
Save these instructions for later use.
Follow all warnings and instructions marked on the audio equipment.
1.
READ INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
2.
RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3.
HEED WARNINGS
All warnings on the product and in the operating instructions should be adhered to.
4.
FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5.
WATER AND MOISTURE
The product should not be used near water – for example, near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool, etc.
6.
CARTS AND STANDS
The product should be used only with a cart or stand that is
recommended by the manufacturer.
6A. An appliance and cart combination should be moved with care. Quick
stops, excessive force, and uneven surfaces may cause the appliance
and cart combination to overturn.
7.
WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling as recommended by the manufacturer.
8.
HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products ( including amplifiers ) that produce heat.
9.
VENTILATION
The product should be situated so that its location or position does not interfere with its proper
ventilation. For example, the product should not be situated on a bed, sofa, rug, or similar surface that
may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet
that may impede the flow of air through the ventilation openings.
10. POWER SOURCES
The product should be connected to a power supply only of the type described in the operating
instructions or as marked on the product.
11. GROUNDING OR POLARIZATION
Precautions should be taken so that the grounding or polarization means of a product is not defeated.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the product.
13. CLEANING
The product should be cleaned only as recommended by the manufacturer.
14. POWER LINES
An outdoor antenna should be located away from power lines.
E-3
Memorex.p65
3
11/8/01, 11:11 AM
15. OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to
provide some protection against voltage surges and built up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA 70 provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode. See Figure.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
16. NONUSE PERIODS
The power cord of the product should be unplugged from the outlet when left unused for a long period
of time.
17. OBJECT AND LIQUID ENTRY
Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through
openings.
18. DAMAGE REQUIRING SERVICE
The product should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen or liquid has been spilled into the product; or
C. The product has been exposed to rain; or
D. The product does not appear to operate normally or exhibits a marked change in performance; or
E. The product has been dropped, or the enclosure damaged.
19. SERVICING
The user should not attempt to service the product beyond that described in the operating instructions.
All other servicing should be referred to qualified service personnel.
20. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.
PRINTED IN HONG KONG
E-4
Memorex.p65
4
11/8/01, 11:11 AM
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS
AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT IN CABINET OR IN ANOTHER
CONFINED SPACE IN ORDER TO KEEP WELL VENTILATED CONDITION. ENSURE THAT CURTAINS
AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION CONDITION TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING.
CONNECTIONS
Speaker connections
•
•
•
Connect the right speaker to terminal R, with the red wire to + and the black wire to –.
Connect the left speaker to terminal L, with the red wire to + and the black wire to –.
Clip the stripped portion of the wire as shown.
AUX INPUT SOCKETS
•
You can connect TV. or VCR audio left and right outputs to the AUX at the rear of the system.
AC POWER SUPPLY
•
After all other connections have been made, connect the AC power cord to the wall outlet.
HEADPHONES SOCKET
•
You can plug headphones into the PHONES socket if you want to listen in private. Ensure you set the
volume to a low to avoid damage to your hearing.
PRESET EQ EFFECTS
The quality of tone can be adjusted by the preset sound equalizer which has been set into 4 modes
(CLASSIC, ROCK, POP, JAZZ). By pressing the corresponding sound preset button you can choose one
of your favourite mode according to you music style.
E-5
Memorex.p65
5
11/8/01, 11:11 AM
LOCATION OF CONTROLS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
CD Door
Disc skip button
Disc number button
CD Open / Close button
CD stop button
CD Play / Pause button
Remote sensor
Standby indicator
Display
Power button
Clock adjust button
Volume control
Headphone jack
Sleep button
CD button
Tuner button
Band button
Remain button
Random button
Repeat button
Program button
Tuner up / CD skip track (Forward) / Search button
Preset EQ button
Preset up button
Preset down button
X-Bass button
Tape button
Aux button
Tuner down / CD skip track (Back) / Search button
TAPE A
30.
31.
32.
33.
34.
35.
Cass door (A)
Play button
Rewind button
F.FWD button
Stop / Eject button
Pause button
TAPE B
36.
37.
38.
39.
40.
41.
42.
Cass door (B)
Record button
Play Button
Rewind button
F.FWD button
Stop / Eject button
Pause button
43.
44.
45.
46.
47.
Speaker
FM antenna
Speaker jacks
Beat Cut FM mode / Dubbing speed selector
Aux input sockets
E-6
Memorex.p65
6
11/8/01, 11:11 AM
LISTENING TO THE RADIO
Manual tuning
1. Press the TUNER button to select tuner mode.
2. Press the BAND SELECT button to the desired band.
a) For FM Stereo reception:
The unit provides FM MONO / STEREO selector (combined with Beat Cut selector). In Stereo mode,
the unit will automatically switch to stereo when an FM stereo broadcast is received and stereo mark
turn on in the display.
b) For FM MONAURAL (MONO) reception:
To receive weak (noisy) FM station, to set FM MONO / STEREO selector to MONO position. The
reception may be improved, but the sound is monaural (MONO).
3. Press the (–) TUNING (+) button softly to execute 1 step / 1 push tuning.
Auto tuning
1.
2.
3.
Follow steps 1 and 2 of “Manual tuning”.
Press the (–) TUNING (+) button continuously to start automatic tuning.
To stop the auto tuning, press the (–) TUNING (+) button again.
STORING PRESET STATIONS
You can store up to 30 stations in the memory. When a preset station is selected, the preset number
appears next to the frequency.
1. Press TUNER on the set or remote control to select TUNER mode.
2. Press BAND again to select the desired waveband.
3. Press TUNING (–) or (+) to tune to the desired frequency.
4. Press briefly PROGRAM
– PRGM flashes on the display.
5. Press PRESET
or
to select a preset number.
– The preset number flashes on the display.
6. Press PROGRAM again.
– The station and the preset number are stored.
• Repeat the above procedure to store other preset stations.
TUNING TO PRESET STATIONS
•
–
Press PRESET
or
(or on the remote control) to select the desired preset number.
The preset number, frequency and waveband appear on the display.
LOADING AND PLAYING CDs
1.
2.
3.
4.
Press POWER button to “ON” the unit.
Press the CD button.
Press the OPEN / CLOSE button to open the disc tray.
Place the CD(s) on the disc tray. Label side up.
• CDs can be placed on any open position on the disc tray.
CAUTION:
Do not stack CDs in the tray.
This could damage the player and the CDs.
5. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the
open position.
6. Press the OPEN / CLOSE button to close the disc tray.
• The total number of tracks will be displayed.
• The music schedule will be displayed only for the number of tracks on the disc.
7. Press DISC SKIP button to select the DISC 1 – DISC 3.
8. Press the PLAY / PAUSE
button.
• Playback will begin from track 1 on the disc you have specified to play.
Note:
If the OPEN / CLOSE button is pressed whilst a CD is being played, the current CD will continue its
playback, the disc tray will open and you can replace any CD other than the one which is being played.
E-7
Memorex.p65
7
11/8/01, 11:11 AM
TO INTERRUPT PLAYBACK:
1.
2.
Press the PLAY / PAUSE
• “
“ will appear.
Press the PLAY / PAUSE
button.
button to resume playback from the same point.
TO STOP PLAYBACK:
Press the STOP
button.
TO REMOVE THE CDs:
Whilst in the stop mode, press the OPEN / CLOSE button.
• The disc tray will open. Remove the two discs. Then press the DISC SKIP button to rotate the disc
tray and remove the remaining disc.
SKIP SEARCH
The skip search function allows you to “SKIP” tracks in the forward or reverse direction in order to go
quickly to the desired selection.
CAUTION:
•
•
Only load to replace CDs on the two forward
disc holders. Do not try to force a CD into the
back disc holder as this will cause the CD to
become jammed resulting in malfunction and / or
damage to the system.
Make sure that CDs are properly placed in the
disc holders.
To skip tracks in the forward direction:
• Press the
button
To skip tracks in the reverse direction:
• Press the
button
MANUAL SEARCH
Use the manual search function to search for any point on the compact disc. Manual search operates from
the playback or pause mode only.
To search in the forward direction:
• Press and hold the
button until the desired point is found.
To search in the reverse direction:
• Press and hold the
button until the desired point is found.
Note:
•
During manual search from the playback mode the playback volume will be reduced.
•
During manual search from the pause mode the volume will be cut completely and the search speed
will be increased by approximately 2 times the normal speed.
To restart playback, press the
/ button.
DISC CONTROL BUTTON
•
Direct disc selection.
Press the CD control button (DISC 1 to DISC 3) corresponding to the no. of the required CD
Example: To designate DISC 2.
The tracks on the designated CD are played in sequence.
E-8
Memorex.p65
8
11/8/01, 11:11 AM
PROGRAMME PLAYBACK
Use this function to programme the CD player to playback tracks in the order that you like. Up to 20 tracks
can be programmed. Programme play is operated with the remote control or cabinet.
1. Press the PROG button
If a disc(s) has already been loaded, the CD player will go directly to the programming mode and the
“PROG” indicator will show on the system display. The disc number displayed indicates the disc that
is ready to be programmed.
Before proceeding:
When more than one CD is loaded: If you want to start programming on a disc other than the one
displayed at this point, first press the DISC SKIP Button to select disc 1, 2 or 3 for that disc in order
to select it before continuing with step 2.
2. To programme select tracks
Use the PROGRAM button to programme the tracks you want.
Each time a button is pressed the tracks number and programme number (P-01, P-02 etc.) will appear.
To programme all tracks:
Press the DISC SKIP to select disc button 1, 2 or 3 of the disc you are programming.
The programme number will appear (all tracks).
3. To continue programming on another disc. Press the DISC SKIP Button to select disc 1, 2 or 3 for that
disc and repeat step 2.
4. Press the
button to start programme playback.
After playback of all programmed tracks has finished, playback will stop automatically.
To stop programme playback:
• Press the STOP
button.
Note: The program memory will be cleared when press and hold the STOP button over 3 seconds.
Random playback
Use this function to programme the CD player to playback tracks in a random order. When more than one
disc is loaded, tracks will be randomly played back form all disc.
• Press the RANDOM button.
If a disc(s) has already been loaded, the CD player will go directly to the random mode and “RANDOM”
will show on the system display. Once tracks are programmed random playback will start automatically.
To cancel the random programme and stop playback:
• Press the STOP
button.
Repeat play
Press the Repeat button before or during play. It is possible to perform repeat play of a single track, all
tracks on one CD, or all tracks on all CDs in the CD changer.
Each time the Repeat button is pressed, the mode will change in the order from 1 track repeat, to 1 disc
repeat, to all disc repeat, to clear mode.
LISTENING TO TAPE
This unit has 2
Cassette decks
Stop / Eject Key
Fast Forward Keys
& Rewind Keys
Play Keys
Pause Keys
Record Key
TAPE A / 1 and TAPE B / 2
The difference between them is TAPE B / 2 has record function but TAPE A / 1
hasn’t.
Press to stop all deck operations. Press again to open the Cassette Doors.
Press to start rapid tape Fast winding in either forward or reverse direction.
Press
Press
Press
Press
to stop playing a tape.
to stop tape operation temporarily.
again to resume tape operation.
together with Play (TAPE B / 2 ONLY) Key to start recording.
E-9
Memorex.p65
9
11/8/01, 11:11 AM
INSERTION AND REMOVAL OF CASSETTE
–
–
–
–
Press Stop / Eject Key to open the cassette door.
Put your cassette tape down the holder properly, with the exposed section Downward and the playback
side facing you.
Close the cassette door securely before starting.
When finished press Stop / Eject Key to open the cassette door and retrieve your cassette tape.
PLAYBACK
–
–
–
–
–
–
–
You can choose either TAPE A / 1 or TAPE B / 2 for playback.
Press the TAPE Button.
Put in your cassette tape.
Press Play Key to activate playback.
Adjust the Volume Controls to the desired level.
Use Pause Key whenever you want to stop playback temporarily.
Press Stop / Eject Key when finished.
CONTINUOUS PLAYBACK (ONLY FROM A / 1 TO B / 2 DECK)
–
–
–
–
–
–
–
–
Press the TAPE Button.
Put in your Cassette Tapes.
Press Play Key of Deck A / 1.
Press Pause Key and Play Key of Deck B / 2.
Deck A / 1 will activate while Deck B / 2 is at Rest.
Adjust Volume Control to the desired level.
When Tape A / 1 reaches its end and stops. Tape B / 2 starts playing automatically.
When Tape B / 2 runs to its end. It will automatically stop.
RECORDING
A. RECORDING FROM RADIO
– Press the Tuner button.
– Tune in your station and put in your cassette tape.
– Press Record Key and the Play Key of deck at the same time to start recording.
– Press STOP / EJECT Key when finished.
Note: If beat noise is present when recording. Adjust the position of the Beat Cut Switch on rear panel
for AM only.
B. RECORDING FROM CD
–
–
–
–
Press the CD Button.
Insert a cassette suitable for recording, press pause key then press record key. Recording function will
be on stand by.
Activate the CD player, and then press (to release) Pause Key to start recording.
To stop recording, first press STOP Button on CD player – then press the STOP / EJECT Key on tape
deck.
SYNCHRONIZE DUBBING (USING DECK A / 1 & DECK B / 2)
Set in tape mode
–
–
Insert a pre-recorded cassette with full reel on the left into Deck A / 1.
Insert a blank cassette Tape with full reel on the left into Deck B / 2.
Normal speed dubbing
–
–
–
–
Press the Tape Function Selector, set the dubbing mode selector to “NORMAL” position.
Press Play key of Tape A / 1 and Record Key together with the Play Key of Tape B / 2 at the some
time then both Tapes start dubbing synchronously.
Adjust the Volume Controls to the desired output level and also for the monitoring purpose.
To Stop Dubbing, press both Stop / Eject Keys.
High speed dubbing
–
Following the steps of normal speed dubbing procedure, but set the dubbing mode selector to “HIGH
SPEED DUBBING” position.
E-10
Memorex.p65
10
11/8/01, 11:11 AM
CLOCK SETTING
•
–
•
•
–
•
•
Press the CLOCK set button twice.
The hours start flashing.
Press the TUNING Button (
or
) to adjust the
hours.
Press the CLOCK Set button again.
The Minutes start flashing.
Press the TUNING Button (
or
) to adjust the
minutes.
Press the CLOCK Set button or wait a few seconds and the clock
will start running.
TIME DISPLAY FORMAT:
•
–
All the time information is shown in either 12h or 24h format.
Pressing and holding the Clock button for some seconds will access the time format change mode.
The actual time format will be shown in the display, and then it could be changed by using the CLOCK
button between 12h or 24h format.
SETTING THE TIMER
•
The system can switch on to TUNER, CD mode or TAPE automatically at a preset time. It can serve
as an alarm to wake you up.
• Before setting the timer, make sure the clock is set correctly.
IMPORTANT: Performing the settings below should be done quickly. When waiting too long before
pressing a button, the clock leaves the programming mode and returns to time-of-day
indication.
• Press the TIMER button once. (Using the remote control unit)
– TIMER appears on the display.
• Press the ON / OFF button once.
– The TIMER flag flashes.
• Press TUNING / SKIP
/
button to select the desired source.
• Press ON / OFF to confirm your selection.
Note: When select the TUNER source, the display will show “PR”, press TUNING / SKIP
/
to select the preset station. Press ON / OFF button again.
– The display will shows TIMER ON and “00:00” flashes.
*
In case of a 12-hour clock, watch the AM / PM indication.
• Press TUNING / SKIP
/
button to set the hour for timer start.
• Press ON /OFF button once.
– The minutes and ON start flashing.
• Press TUNING / SKIP
/
button to adjust the minutes.
• Press ON / OFF button again.
– The display will shows TIMER OFF and “00:00” flashes.
• Set the hours and minutes in the same way as above.
• Press POWER to turn the unit off.
• Wake up cassette playback.
– Set the system to the standby mode insert a recorded cassette and press the PLAY
button.
SWITCHING OFF THE TIMER FUNCTION COMPLETELY
•
•
–
Set the “TIMER ON / OFF” at same time (i.e. if “TIMER ON” is set at “03:00”, set “TIMER OFF” at
“03:00” as well to set timer completely off).
Press the TIMER button until the word TIMER disappears from the display.
The timer function is now completely switched off.
E-11
Memorex.p65
11
11/8/01, 11:11 AM
SLEEP TIMER
The sleep timer is a countdown timer for switching the system to standby mode after a specified time.
It enables you to listen to the radio, a CD or a cassette prior to falling asleep. The sleep timer can be set
from 120 to 15 minutes.
• Switch on the system by pressing the STANDBY (power) button, either on the system or on the remote
control.
– The STANDBY indicator disappears.
• Select the sound source by pressing TAPE, TUNER / BAND, AUX or CD.
• Press the SLEEP button to set the sleep time.
– The word SLEEP and the number 120 will appear on the display.
– The system will now play for 120 minutes.
• To decrease the sleep time in steps of 15 minutes. Press SLEEP button to number 15 will appear on
the display.
– After a few seconds, the previous display is shown again.
• To switch off the system before the SLEEP time has elapsed, press STANDBY (power), either on the
system or on the remote control.
SPECIFICATION
POWER SOURCE
AC:
120V~60Hz
RADIO FREQUENCY COVERAGE
FM:
AM:
87.5 – 108 MHz
520 – 1720 kHz
RECORDING SYSTEM
Recording System
Erasing System
AC Bias
Magnetic Erase
GENERAL
Speaker
Power Output
Headphones:
4 Ohms
10 Watt at 10% T.H.D. per channel
3.5MM stereo jack plug, 8 – 32Ω
CD PLAYER
Pick Up:
Encoding:
3-Beam, semiconductor laser
1-Bit linear 8 x oversampling
E-12
Memorex.p65
12
11/8/01, 11:11 AM
REMOTE CONTROL TRANSMITTER
CONTROL FUNCTIONS
BATTERY INSTALLATION
The infrared transmitter requires 3.0 volts for operation.
BUTTON DESCRIPTION
1.
2.
POWER button
Function Mode
CD
TAPE
TUNER (BAND)
AUX
3. PROGRAM
4. DISC SKIP
5. REPEAT
6. TIMER
ON / OFF
7. VOLUME + / –
8. PLAY / PAUSE
9. STOP
10. TUNING / SKIP + / –
For CD
11.
12.
13.
14.
15.
16.
For Tuner
For Clock setting
MUTE
CLOCK
PRESET-EQ
RANDOM
PRESET /
REMAIN
17. SLEEP
– To switch the unit to standby mode.
–
–
–
–
–
–
–
–
–
–
–
–
Press to select CD mode.
Press to select TAPE mode.
Press to select TUNER mode and select the desired waveband.
Press to select AUX mode.
To program CD tracks or radio preset stations.
Press once to select the desire CD.
Press to enable repeat play.
To set the timer.
To adjust the Start / Stop time.
To adjust the volume.
To start or interrupt CD playback.
Press to terminate CD playback.
–
–
–
–
–
–
–
–
–
–
To select previous / next CD track.
To search Forward
or Backward
within a track.
To select a Lower / Higher tuner.
To select the hour and minutes.
To mute the sound output. Press again to restore the sound.
To set the clock.
To select sound control: CLASSIC, POP, ROCK, JAZZ.
To enable Random play for CD.
To select a radio station in memory.
Display track and disc time information (elapsed and remain time).
Track elapsed time → Track remain time → Disc elapsed time → Disc
remain time.
– To activate the sleep function.
E-13
Memorex.p65
13
11/8/01, 11:11 AM
TROUBLESHOOTING GUIDE
BEFORE REQUESTING SERVICE, PLEASE REFER TO THE FOLLOWING CHART FOR THE SYMPTOM
AND POSSIBLE SOLUTION.
SYMPTOMS
POSSIBLE CAUSES
POSSIBLE SOLUTIONS
FUNCTION SELECTOR SWITCH
NOT SET TO CD POSITION
SET FUNCTION SELECTOR
SWITCH TO CD POSITION.
CD NOT INSTALLED OR
INSTALLED UPSIDE DOWN.
INSERT CD WITH LABEL SID E UP.
DISC IS DIRTY OR SCRATCHED.
WIPE DISC WITH A SOFT CLOTH
OR TRY ANOTHER DISC.
CD PLAYER
CD PLAYER WILL NOT
OPERATE
CD SKIP WHILE PLAYING.
RADIO
FM STEREO INDICATOR
DOESN’T LIGHT
STATION NOT PROPERLY TUNED. RETUNE THE FM STATION.
BAND/FM MODE SWITCH IS SET
TO FM POSITION OR STATION IS
BROADCASTING IN MONO.
SET BAND/FM MODE SWITCH TO
FM STEREO POSITION OR TUNE
TO A STEREO BROADCAST
STATION.
NOISE OR SOUND
DISTORTEDON AM OR FM
BROADCASTS
FM PIGTAIL ANTENNA NOT
EXTENDED OR WEAK STATION.
FM – EXTEND THE PIGTAIL
ANTENNA.
AM – ROTATE UNIT UNTIL BEST
RECEPTION IS OBTAINED.
NO SOUND
STATION NOT PROPERLY TUNED. RETUNE AM OR FM STATION.
FUNCTION SELECTOR SWITCH
NOT SET TO RADIO POSITION.
SET FUNCTION SELECTOR
SWITCH RADIO POSITION.
VOLUME CONTROL IS AT
MINIMUM POSITION.
INCREASE VOLUME.
FUNCTION SELECTOR SWITCH
NOT SET TO TAPE POSITION.
SET FUNCTION SELECTOR
SWIT CH TO TAPE POSITION.
NO RECORDING ON TAPE.
CHECK CASSETTE.
CASSETTE
NO SOUND
CASSETTE DOES NOT PLAY PLAY BUTTON IS NOT PRESSED PRESS THE PLAY BUTTON OR
THE PLAYBACK
OR THE TAPE MUST BE REWIND. REWIND THE TAPE.
SOUND DISTORTION OR
SLOW ERRATIC SPEED.
DIRTY HEAD, TAPE TOO OLD OR
WORN OUT.
CLEAN THE HEAD OR REPLACE
PRE-RECORDED CASSETTE
TAPE.
WEAK OR DISTORTED
RECORDING.
CASSETTE TAPE IS POOR
QUALITY OR BATTERIES ARE
WEAK.
CHANGE TO ANOTHER
CASSETTE TAPE.
CHECK BATTERIES.
AC CORD NOT CONNECTED
PROPERLY OR WEAK OR DEAD
BATTERIES.
CHECK AC CORD CONNECTIONS
OR REPLACE WEAK OR DEAD
BATTERIES.
HEADPHONE PLUGGED INTO
PHONE JACK.
REMOVE HEADPHONE PLUG
FROM JACK.
VOLUME CONTROL SET TO
MINIMUM.
INCREASE THE VOLUME
GENERAL
NO SOUND
Customer Service : 1-800-919-3647
E-14
Memorex.p65
14
11/8/01, 11:11 AM
LIMITED WARRANTY
AUDIO/PHONES
We at MEMOREX believe you will be pleased with your new Product. Please read this Warranty
carefully. Memorex warrants this product to be free from manufacturing defects including original parts
and workmanship for a period of ninety (90) days from the date of original purchase in, and if used in,
the United States.
Should you find your unit is not operating properly during the terms of full coverage of this warranty,
ninety (90) days, you should contact your original place of purchase for an exchange with a valid receipt.
If necessary, Memorex will provide one of the following options (at Memorex’s discretion), providing the
manufacturing defect is verified along with the date of purchase.
–
–
Repair service for ninety (90) days from date of original purchase at no charge for labor and parts
at their authorized warranty service facility, providing the manufacturing defect is verified along
with the date of purchase.
Replacement of defective unit with either a new, refurbished, or equivalent model at no charge
for ninety (90) days from date of original purchase.
This warranty is void if the product is:
A) Damaged through negligence, abuse, misuse, accident, or acts of God.
B) Used in commercial applications or rentals.
C) Modified or repaired by anyone other than Memorex or their expressly authorized representative.
D) Damage resulting from the improper connection to equipment of other manufacturers.
This warranty does not cover:
A) Cost incurred in the shipping of the product to and from the Memorex authorized repair facility
listed.
B) Damage or improper operation caused by the failure to follow the operating instructions
provided with the product.
C) Routine adjustments to the product, which can be performed by the customer as outlined in
the owner’s manual.
D) Signal reception problems caused by external factors.
E) Products not purchased in the United States.
F) Damage to the products used outside the United States.
G) Damage to audiocassette tapes.
H) Damage to Compact Discs.
In the event that service is required under this warranty, please contact CUSTOMER SERVICE at
1-800-919-3647 or contact our website at www.memorex.com.
THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES SOLELY TO THE ORIGINAL PURCHASER
AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION
TO A PERIOD OF THE EXPRESSED WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE
DATE OF THE ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESSED
OR IMPLIED SHALL APPLY TO THE PRODUCT THEREAFTER. MEMOREX MAKES NO WARRANTY
AS TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR PURPOSE OR USE.
THE EXTENT OF MEMOREX’S LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AT THE SOLE DISCRETION OF MEMOREX. IN NO EVENT
SHALL MEMOREX’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER. UNDER
NO CIRCUMSTANCES SHALL MEMCORP BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,
INCIDENTAL, FORESEEN, UNFORESEEN, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT
OF OR IN CONNECTION WITH THE USE OF THIS PRODUCT.
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO
STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES OR EXCLUSION
OF CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.
E-15
© 1999, Memorex is a registered trademark of Memorex Telex N.V.
Memorex.p65
15
11/8/01, 11:11 AM
MPD8845.O/M.QXD
6/25/02
11:55 AM
Page 23
Memcorp, Inc.
Weston, Fl
Printed in Hong Kong
Visit our website at www.memcorpinc.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement