Task Force Tips VUM, model # AKE111111D electrically controlled monitor valve shall be
provided under the monitor. The valve shall be controlled by a remote panel-mounted pushbutton switch with LED lights to indicate valve position and shall be included. The valve can
also be controlled with an NFPA compliant slow-close knob which can be configured for left or
right hand operation on the valve. A position indicator shall be provided on the valve to allow for
quick visualization of the status of the valve in the open, closed or partial positions. The unit
shall have a flow capability of up to 2000 GPM with friction loss no more than 6 psi. For
maximum corrosion protection the aluminum casting shall be hardcoat anodized, with a silver
powder coat internal and external finish. The valve ball shall be stainless steel and have an
automatic drain for draining waterway when valve is closed and unpressurized. The unit shall
have a unique serial number and be covered by a five-year warranty.
The valve shall be configured with a 4" ANSI 150 flange inlet and TFT Code RPM male
connection for a Task Force Tips monitor with TFT Code RPF female inlet. Ports C1, C2, C3,
and C4 shall have blind plugs installed.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF