Smartflow Colour Brochure (English)

Smartflow Colour Brochure (English)
Smartflow Fluid Control, Ejector Couplings and Mould Safety
Cool, connect and protect your mould with Smartflow
®
Smartflow Fluid Control, Ejector Couplings and Mould Safety
For more information and full
technical specification visit:
www.invotecsolutions.co.uk/smartflow
Aluminium
Manifolds
High quality and
manufactured to exacting
standards. One piece
extrusion and anodized
for corrosion protection.
Predrilled for easy mounting
Anodized for corrosion protection
Interlocking bodies (3/4" to 1-1/2")
Bespoke to your porting
requirements
• 3/4" to 2" BSPP Supply - 1/4 to 1"
BSPP Ports
• Available with connectors,
ball valves and flow meters
•
•
•
•
Stainless Steel
Manifolds
Smartflow
Duoflow™
Manifolds
304SS construction giving
you corrosion and chemical
protection.
Duoflow Manifolds are robust
extruded aluminium manifolds
similar to the original Smartflow
one-piece design. The manifolds
are divided internally and
anodized for long term
protection.
The Duoflow design is available
with standard port spacing or a
shorter footprint specifically for
mounting directly to an injection
mould tool.
•
•
•
•
Shorter Length for easier
mounting directly to injection
moulds
Mould-Mount to speed up mould
changes
Economical, Proven Design for
reliability
Optional Quick Disconnect Fittings
for convenience and ease of
installation
Significantly
reduce tool
change times!
•
•
•
•
•
•
•
Leak tested
Single or parallel
Chemical protection
Predrilled for easy mounting
Bespoke to your porting
requirements
3/4" to 1-1/2" BSPP Supply - 1/4 to
1/2" BSPP Ports
Available with connectors, ball valves
and flow meters
Delta-Q Modular
Flow Regulator
Delta-Q Modular Flow Regulator is used in conjunction
with other Smartflow® components such as threaded
end caps, flowmeters,
temperature and
pressure gauges, Tracer
Electronic Flowmeters
or Dr. Eddy Turbulent
Flow Indicators.
Mechanical
Flow
Meters
Compact solid
brass or
aluminium
construction with
Polysulfone
windows.
• Temperature rating to 115°C
• Anodized corrosion resistance
• Pressure rated to 100 psi (6.89 bar)
• Optional thermometer and pressure gauge
• Liquid-filled pressure gauge also available
The Delta-Q Regulator
allows full adjustability
of flow volume from
unrestricted flow to
complete shut off using
the manual flow control
knob.
•
•
•
Compact size works
well in restricted-space locations.
Rugged construction gives years of dependable
service.
210°F (99°C) Temperature Rating allows installation
into a wide range of applications.
• Common
Flowmeter
Configurations
Stocked to provide
same-day delivery
in many cases.
• No Mounting
Restrictions ease
installation in any
position without
extra brackets or
hardware.
• Leak-Free
installation is
based on proven
flowmeter design.
Hot Water/Oil Flowmeters
Stainless steel construction to 288°C
• Throughput 6 gpm (us)
• Temperature rating to 288°C
• All stainless steel construction
• Pressure rated to 150 psi (10.34 bar)
Hot Oil
Flowmeters
Safety and
performance
to 288°C
• Throughput 40
•
•
•
•
gpm (us)
Temperature
rating to 288°C
Stainless steel
internal parts
Pressure rated to 150 psi (10.34 bar)
Body carbon steel with black oxide (1") supply
Smartflow Fluid Control, Ejector Couplings and Mould Safety
Mould Temperature
Regulators
Flow Regulators
Inline or manifold mounted
• Leak free design
• Solid Brass Body
• Needle valve control
• Optional Temperature gauge
• Temperature rating to 115°C
• Pressure rated to 150 psi
(10.34 bar)
Tracer®
Electronic
Flowmeters
Digital process control, local and
remote signal outputs
• All model 3/8" to 2" BSP(P) supply
• 2-418 litres per minute
• Display of Temperature, Flow and BTU's
• Temperature and flow alarms
• Local display, remote alarm,*
and variable output*
Temperature rating
to 110°C
• 100 psi (6.89 bar) or
150 psi (10.34 bar)
3/8" only
* see table
•
For more information and full
technical specification visit:
www.invotecsolutions.co.uk/smartflow
Accurate Mould heating control with no
power or floor space required.
• No Power required
• Very low running costs
• Inlet 1/4" - Outlet 1/2"
• Temperature control 27° to 49°C
• Pressure rated to 125 psi (8.6 bar)
• Unaffected by water pressure changes
• Unaffected by supply temperature changes
• Nickel plated brass and 303 stainless steel
construction
Model
8-28VDC
Battery powered
Brass nickel plated body (3/8” model only)
Aluminium anodized body
Temp. Flow and BTU monitor
Temp. or Flow SDPT switch output
Temp or flow analogue output to pc process
NEW
DD DDS
5
3
3
5
3
3
3
3
3
3
5
3
5
3
Smartflow Fluid Control, Ejector Couplings and Mould Safety
FasTie® Ejector
fast connectors
Automatically lock your ejector to tooling
with fast pneumatic release.
•
•
•
•
•
•
Flexible modular system
Hardened steel components
Super Fast mould changes
No mould or ejector modifications required
Ejector force 2.5 tonnes (1") 7.5 tonnes (2")
Space saving connectors only 1" or 2" diameter
Dr Eddy Diagnoses
Flow Conditions
NEW! Dr. Eddy™ Featuring
Fluid Characteristic
Indication (FCI) Technology
"Takes Care of Water and
Energy Conservation”
Not just a flowmeter, but a tool to help
conserve cooling water resources. In
moulding applications, many
mould operators try to
maximize the flow of water
through their cooling
systems to ensure turbulent
flow. Doing so increases
energy costs for pumping
more water than necessary
through the system. This practice may also
limit the amount of cooling water available
for additional presses on the same cooling
circuit.
Using FCI Technology, Dr. Eddy displays the
condition of the water as it relates to flow
efficiency: laminar flow, transient flow,
or turbulent flow.
•
•
•
•
•
•
•
Brass or Reinforced Nylon Ends with
1/4” or 3/8” NPT or British Parallel
Threads
Scales in English or Metric Units
Polysulfone Sight Glass
Standard Dual-Scale Temperature
Gauge
Optional Quick-Disconnect Fittings
Max. Operating Temperature:
210°F/99°C
Max. Pressure: 100 psi/6.9 bar
For more information and full
technical specification visit:
www.invotecsolutions.co.uk/smartflow
Ferrogard™
Magnetic port filtration keep your mould cooling
channels clear and increase your cycle time.
• Solid brass end caps
• Magnets C5C8 Ferrite
• Negligible pressure drop
• Collector plates Nickel plated steel
• Decreased wear in pumps, heaters and chillers
• Reduced tool and hydraulic system maintenance
Mould Safety Switches
A complete suite of ejector plate and core protection switch,
potentially saving you thousands in broken tooling.
EJECTOR PLATE THIN SWITCHES
CORE SAFETY SWITCHES
The Global
Thinswitch®
•
•
•
•
•
Thinswitch®
•
•
•
2 minute fitting. (No milling
necessary)
Liquid resistant
ONLY 3 or 4mm Thick
Over 14 million cycle life
Temperature max. 79.4°C @
70 mA load
•
•
3/16" Thick
Over 10 million cycle life
Temperature max. 79.4°C @
2 A load
Optional Liquid Resistant model
available
Optional High Temperature model
max. 121.1°C @ 3.5 A load
Smartlock®
Core slide
retainer and
limit switch
•
•
•
•
•
Over 10 million cycle life
17-27 pounds holding force
Superior flush mounted switch
Temperature max. 79.4°C @
2 A load
Optional High Temperature model
max. 121.1°C @ 3.5 A load
The SWAP® Valve
Empty your mould tool of water in seconds.
• Full port design
• No water to dispose
• Body 360 solid brass
• Environmentally friendly
• Valves discs 303 stainless steel
• Significantly reduce tool change times
• Protect tools from corrosion during storage
For more information contact your local distributor
Affix distributor stamp here.
Discover us at:
www.invotecsolutions.co.uk
®
In the event there are no distributor details above, please contact:
Sales and Distribution Invotec Solutions Limited, Unit 8 Park Farm, Tyringham (UK), MK16 9ES
Telephone: 0845 838 1510 • Fax: 0845 838 1520 • Email: [email protected]
Accounts and Administration Invotec Solutions Limited, The Old School, 3 Forest Road, Hartwell (UK), NN7 2HE
stamixco
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement