DE14TN HF Drivers FE - 1.0 Inches 60 W continuous program power capacity 1" horn throat diameter 36 mm (1.4 in) CCAW voice coil Titanium diaphragm 1500 - 18000 Hz response 105 dB sensitivity Specifications1 Mounting And Shipping Info 25 mm (1.0 in) Overall diameter 90 mm (3.5 in) 8Ω Depth 49 mm (2.0 in) Minimum impedance 7.4 Ω Net weight 1.1 kg (2.4 lb) Nominal power handling2 30 W Shipping units 8 Shipping weight 9.4 kg (20.7 lb) Shipping box 245x245x185 mm (9.65x9.65x7.3 in) Throat diameter Nominal impedance Continuous power handling3 60 W Sensitivity (1W/1m)4 105.0 dB Frequency range 2 - 18 kHz Recommended crossover5 2.2 kHz Service Kit Voice coil diameter 36 mm (1.4 in) Winding material Aluminium Replacement diaphragm Inductance 0.14 mH Diaphragm material Titanium Flux density 1.45 T Magnet material Ceramic MMD014TN8 Mounting And Shipping Info Two M5 holes 180° on 76 mm (3 in) diameter Three M6 holes 120° on 57 mm (2.2 in) diameter 1. 2. 3. 4. 5. Driver mounted on B&C ME 45 horn. 2 hour test made with continuous pink noise signal (6 dB crest factor) within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Power on Continuous Program is defined as 3 dB greater than the Nominal rating. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance. 12 dB/oct. or higher slope high-pass filter.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021