User manual | 595 812 E 30 31

Mast feet and heel
The range of super-light, carbon-friendly mast heel and
adaptors are designed for use on all Seldén dinghy mast
extrusions. Three types of interchangeable mast heel –
standard, hinging and multi-sheave, have been designed
to work alongside a series of section adaptors. The new
range reduces the number of mast heel that stockists need
to hold, and makes for easier installation and retrofitting.
A feature of the new mast heel is the slight radius on the
bearing surface to help spread the load of the mast and
ensure a constant load distribution through the full range
of rake. A locating notch has been incorporated into the
design as an aid when stepping the mast, and an A-line is
used on all fittings to help guarantee perfect alignment
between the heel and mast section.
Injection moulded from an advanced composite, the new
mast heel and adaptors are significantly lighter in weight
than aluminium ones, have high shear strength and are
very durable. Unlike the more traditional alloy mast heel,
this new range does not react with carbon.
Seldén can also provide a rotating mast solution.
Manufactured from cast aluminium, it works with the
same range of section adaptors, and is ideal for stayed,
rotating masts.
Simple interchangeable
sheave option.
Adaptor system allows standard heel fittings to suit all sections.
28
Art. No.
Description
Suitable for section
502-601-01
Tenon heel assy
Series II
502-517
Standard tenon (large)
Cumulus, Epsilon, Kappa, F, Gamma, D,
D Plus, Orbis, Series 3, Series 4
502-518
Standard tenon (small)
E, C, Lambda
502-554
Hinging heel
Cumulus, Epsilon, Kappa, F, Gamma, D,
D Plus, Orbis, Series 3, Series 4
502-519-02
4 sheave mast heel
Cumulus, Epsilon, Kappa, F, Gamma, D,
D Plus, Orbis, Series 3, Series 4
502-519-03
6 sheave mast heel
Cumulus, Epsilon, Kappa, F, Gamma, D,
D Plus, Orbis, Series 3, Series 4
502-520-02
3 sheave mast heel
E, C, Lambda
502-520-03
5 sheave mast heel
E, C, Lambda
502-140-01
Rotating mast heel
Cumulus, Epsilon, Kappa, F, Gamma, D,
D Plus, Orbis, Series 3, Series 4
510-158-01
Hinging step for use with
hinging heel 502-554
510-148-01
Mast step (composite)
510-155-01
Heavy Duty Aluminium
Mast Step
510-155-02
Heavy Duty Aluminium
Mast Step with fasteners
502-501
Adaptor
F
502-503
Adaptor
Gamma
502-504
Adaptor
Epsilon
502-506
Adaptor
Cumulus
502-507
Adaptor
Kappa
502-510
Adaptor
D and D Plus
502-511
Adaptor
E
502-513
Adaptor
C
502-514
Adaptor
Lambda
502-551
Adaptor
Series 3
502-528
Adaptor
Series 4
502-574-01
GP14 heel plug (square)
504-360
Composite front sheave for
use with all sheave heels
504-361
Aft centre sheave for items
502-519-02 / 502-519-03
504-362
Aft outer sheave for use with
all sheave heels
504-107
Ball bearing sheave upgrade
for 504-362
504-106
Ball bearing sheave upgrade
for 504-361
504-109
Ball bearing sheave upgrade
for 504-360
166-219
Aft stainless steel shaft pin
(8mm x 48mm) for use with
all sheave heels
166-220
Forward stainless steel shaft
pin (4mm x 32mm) for use
with all sheave heels
502-521
Shaft pin retaining clip for
use with all sheave heels
Hinging heel mechanism.
29

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project