NEX Brochure (pdf 1Mb)

NEX Brochure (pdf 1Mb)
Medium voltage
NEX switchgear
Withdrawable circuit breaker
Quite simply efficient
NEX, a simple and flexible
solution
NEX is the result of worldwide acquired experience and provides
you with a high level of safety and reliability. It is particulary suitable
for the MV section of HV/MV and MV/MV substations.
You will benefit from its simplicity and flexibility.
NEX, simplicity and robustness
NEX complies with IEC 62271-200 standard and exists in 3 voltage levels:
12, 17.5 and 24 kV.
The answer for typical HV/MV substations
NEX is the perfect answer for general type applications, thanks to:
■ pre-designed solutions,
■ easy installation and reduced maintenance,
■ robust design.
NEX is an indoor switchgear
assembly intended to meet
electrical distribution needs
from 1 to 24kV. It incorporates
a set of innovative solutions
using proven techniques:
■ high-performance breaking
devices (Vacuum technology)
digital protection and control system
■ a range of pre-designed
■
and tested cubicles
A design which meets user requirements
NEX design takes into account three categories of user requirements:
■ reliability,
■ simplicity,
■ safety of operators.
NEX, main characteristics
The figures below are given for normal operating conditions,
as defined in IEC 62271-200 and 60694 standards. Operating temperature
range from -5°C to +40°C, altitude less than or equal to 1 000 m
and relative humidity less than or equal to 95%.
Rated voltage (kV)
Insulation level
12
17.5
24
50 Hz/ 1 mn (kV rms) 28
38
50
1.2/ 50 µs (kV peak)
95
125
75
Maximum short-time withstand current and nominal current
Functional unit with vacuum circuit breaker
Ith max (kA/3s)
In max (A)
31.5
31.5
25
2 500 2 500 2 000
Internal arc withstand
IAC-AFLR (kA/s)
25/ 0.5 25/ 0.5
25/ 1
Protection index
IP3X
IP4X
Evolis circuit breaker:
the very best of vacuum technology
NEX is equipped with Evolis, withdrawable, vacuum technology circuit breaker.
The Schneider Electric guarantee
All components of Evolis circuit breaker are produced
by Schneider Electric, including the vacuum interrupters,
manufactured in an ultra-modern production unit in France.
From design to production, our industrial process expertise
guarantees a product that meets standards of quality and reliability.
In compliance with standards
At every stage of development and production, Evolis has been
subjected to a series of tests to guarantee its performance levels.
Evolis is in conformity with IEC 62271-100 standard.
Development and production sites are certified according to ISO 9000:
2000 and ISO 14000.
NEX, a simple design
Busbar
compartment
This section connects
the switcboard cubicles
via busbars
Low voltage
cabinet
This section includes:
■ the Sepam protection
and control unit
■ the low voltage
components
Switchgear
compartment
This section contains
the MV protection
devices:
■ vacuum breaking devices
(circuit breakers)
■ lever-type propulsion
mechanism for racking
in-out
■ interlocks to anchor
the withdrawable part.
Cable compartment
This compartment,
located in the lower part
of the cubicle, includes:
■ the earthing switch
■ the current sensors
and voltage transformers.
NEX, flexiblity
A complete offer
NEX is a medium voltage offer comprising cubicles with
Evolis vacuum circuit breaker, sensors, MV connections, etc.,
easy to select and implement.
Adaptability
NEX offers you flexible and adapted solutions:
■ NEX can take into account technical needs (medium voltage,
low voltage cabinet) according to customer exploitation habits.
Closer to you
NEX allows a quick response to requests for quotes and tenders,
and gives you the benefit of local support centres all over the world:
■ NEX is produced in 44 plants, distributed in 17 countries in the world
(in 2006),
■ you have the guarantee of a Merlin Gerin product, thanks to training,
technical assistance, regular quality audits…
Ask for validation certificates.
NEX, a range of functional units
NEX, a complete offer based on 4 functions.
Incomer/ Feeder (IF)
Line (LI-B, LF-B)
Transformer
(TI-B, TF-B)
■ Generator (GI-B)
■
❶ busbar
❷ LV cabinet
❸ withdrawable part
❹ current sensors
❺ earthing switch
❻ voltage transformers
❶
❷
■
❸
❹
❺
❻
Feeder (motor, capacitor) (IF)
■
■
Motor (MF-B)
Capacitor (CB-B)
❶ busbar
❷ LV cabinet
❸ withdrawable part
❹ current sensors
❺ earthing switch
❻ voltage transformers
❶
❷
❸
❹
❺
❻
Bus coupler/ riser (BC – RF – RW)
■
■
Switchboard (BS-B)
Substation (SS-B)
❶
❷
❸
❶ busbar
❷ LV cabinet
❸ withdrawable part
❹ voltage transformers
❹
Metering and busbar earthing (VT - BM)
Switchboard (BB-V)
❶
❷
❶ busbar
❷ LV cabinet
❸ earthing switch
❹ voltage transformers
❸
❹
Schneider Electric Industries SAS
Head Office
89, bd Franklin Roosevelt
92506 Rueil-Malmaison Cedex
FRANCE
www.schneider-electric.com
ART. 818830
As standards, specifications and designs change from time to time, please ask for confirmation of the information given in this
publication.
This document has been
printed on ecological paper
Design: www.adncom.fr
Photos: Schneider Electric - adncom - Artechnique
Printing:
04/2006
MVSED106011EN © 2006 Schneider Electric - All rights reserved
■
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement