SET POINT ADJUSTMENT SCREW H DIA. CONVERSION TABLE DIM. INCHES mm A 4.688 119.1 B 3.563 90.5 C 1.781 45.2 D .906 23.0 E 313 7.9 COMMON | F .406 10.3 NORMALLY OPEN - р но NORMALLY CLOSED G LOW PRESSURE > HIGH PRESSURE в |< E — = D «— STANDARD TOLERANCES UNLESS NOTED: AL GEAR OMENSONS” À da SCALE 1:2 ALL ANGLES £10 DATE NAME MATERIAL DWN BY 1700 SERIES FINISH LOW DIFFERENTIAL PRESSURE CHKD SWITCH DWYER INSTRUMENTS, INC, APPD MICHIGAN CITY, INDIANA 46360 U.S.A. NO. CHANGES BY/DATE ACADR12 NOTICE: This drawing and the principles and elements of design embodied therein are the exclusive property of DWYER INSTRUMENTS, INC. and are not to be communicated, disclosed, reproduced or used except as previously authorized in writing by such corporation and must not be submitted to outside parties for examination without the written consent of said corporation. FR. NO.