White Pages for Modular Small Cabinet Fan (construction features, dimensional data, wieghts, performance, and technical data on various options and accessories)

White Pages for Modular Small Cabinet Fan (construction features, dimensional data, wieghts, performance, and technical data on various options and accessories)
Modular Small Cabinet Fan
Model MSCF
•
Modular Design
•
Ultra-Low Profile
•
Easy Access
Unique Construction Features
Ultra-Low Profile - Compact design enables unit to be placed in tight ceiling spaces.
Double Wall - Allows unit to be wiped down with a dry or damp rag. Eliminates exposed insulation fibers and
reduces the contaminants in the air stream such as mildew and mold. It has a solid interior liner with 1 inch, 1.5
lb. density fiberglass insulation between the walls to prevent unit from sweating or dripping. (3 pound optional)
Lifting Lug/Mounting Bracket - Enable installers to lift unit into place and may be used to fasten the unit to a
permanent fixed structure.
Insulated Stainless Steel Drain Pan - Corrosion resistant drain pan utilizes a sloped, double pitched, two
connection design to prevent overflowing, directing the condensation to either a main or auxiliary drain
connection. It is insulated with an additional 1 inch of 1.5 lb density fiberglass insulation.
Side Access Panels - Two panels on every module are interchangeable and may be removed for inspection or
servicing and are bolted to the unit. Bolt holes are threaded to prevent it from stripping out while tightening.
Removal of either side panel allows easy access to all internal components. (1/4 turn fastners optional)
Inlet/Outlet Duct Collars - Collars provide for quick, easy duct connection.
Drive Frame - This unique drive frame is mounted to a rail, which allows it to slide making belt tensioning easy.
The drive frame is constructed of heavy gauge steel enabling it to support the motor, scroll, and wheel to
ensure long life and durability.
Vibration Isolation - Internal neoprene isolators reduce the transmission of noise and vibration to the building
structure. They are placed between the housing and the drive frame rail, which supports the entire drive
assembly, wheel, and scroll to assure long life and quiet operation. (Spring isolators are optional)
Motor - Motors are carefully matched to the fan load for every application. In the event that a heating coil is
used, the max motor temperature is 40 degrees C (104 degrees F), based on the motor ambient rating.
Belts/Sheaves/Pulleys - Belts and pulleys are sized for 150% of driven horsepower. Machined cast pulleys are
adjustable for final system balancing. Belts are static free and oil resistant.
Bearings with Grease Fittings - Sealed cast pillow block bearings are 100% factory tested and designed
specifically for air handling applications with minimum (L10) life in excess of 100,000 hours.
Shafts - Turned, ground, and polished to precise tolerances. Close tolerance between the shaft and bearing
result in longer life.
Wheel - The MSCF houses a forward curved wheel (FC). All wheels are statically and dynamically balanced to
ensure smooth vibration free operation. The FC wheel is constructed of galvanized steel and provides high
efficiency with low sound levels.
Name Plate - A mylar name plate is used for model, mark and serial number identification.
2
Table of Contents
Introduction
• Construction Features . . . . . . . . . . . . . . .2
• Options and Accessories . . . . . . . . . . . . .3
General Data
• Dimensions and Weight . . . . . . . . . . . . . .4
• Model Number Description . . . . . . . . . . .4
• Performance . . . . . . . . . . . . . . . . . . . . . . .5
Technical Data
•
•
•
•
•
•
•
•
•
•
Fan Data . . . . . . . . . . . . . . . . . . . . . . . .6-12
Plenums . . . . . . . . . . . . . . . . . . . . . . . . . .13
Steam Coils . . . . . . . . . . . . . . . . . . . .14-15
Hot Water Coils . . . . . . . . . . . . . . . . .16-18
Electrical Coils . . . . . . . . . . . . . . . . . . . . .19
Chilled Water Coils . . . . . . . . . . . . . .20-21
Direct Expansion Coils . . . . . . . . . . .22-23
Filters . . . . . . . . . . . . . . . . . . . . . . . . .24-25
Mixing Boxes . . . . . . . . . . . . . . . . . . .26-27
Specifications . . . . . . . . . . . . . . . . . . . . .28
Options and Accessories
Sealed Double Wall - Allows the unit to be wiped down with hot water. Eliminates exposed insulation fibers
from entering the air stream and significantly reduces the chance of mildew or mold buildup.
Insulation - Cabinet may also be selected with 1 inch, 3 lb. density hardboard insulation.
Spring Vibration Isolation - Internal spring vibration is available on all units 14 inches and taller.
Base or Hanging isolators - Complete base and hanging isolator kits are available with either neoprene or
spring isolators. The isolators are sized to match the weight of the fan. (Hanging rods supplied by others)
Disconnect Switch - Nema-1 switch is factory mounted and wiring is provided from the motor as standard
(other switches are available). All wiring and electrical components comply with the National Electric Codes
(NEC) and are either UL listed or recognized.
Coils - Available for both heating and cooling applications. Coil modules may be attach in any order.
Hot Water - 1 or 2 or 4 row
Chilled Water - 4, 6, or 8 row
Direct Expansion - 4, 6, or 8 row - Sizes 45-85 will have Interlaced DX Coils
Steam - 1 or 2 row
Electric - See CAPS for more information
Filters - Sloped or vertical pre-filters are available as either aluminum or pleated. Aluminum 2 inch filters are
70% efficient and the 4 inch pleated filters efficiencies are MERV-8 (30%) and MERV-11 (60%).
Mixing Box - The mixing box may be configured in multiple ways. Inlet positions may be selected in any two
of the three inlet positions, top, end, or bottom. Selection include dampers, 24 volt actuators and vertical or
sloped filter banks.
Plenums - Access plenums may be placed between any module providing additional access, space for
mounting controls, or reducing turbulent air.
1/4 Turn Fastners - An option that allows easy access to module without any tools necessary.
Stainless Steel Shafts - are available in all sizes.
3
MSCF General Data
Mixing Box
Plenum
Filter
Heating
Cooling
Fan
H
A
B
C
D
G
E
F
MSCF Dimensional Data
Unit
Size
15
20
25
30
45
50
65
85
A
w/o Filter w/ Filter
11.0
14.0
16.0
18.5
18.5
21.0
26.0
26.0
24.5
24.5
27.0
31.0
32.0
32.0
38.0
38.0
B
C
12"
24"
Vertical
Sloped
12.75
12.75
12.75
12.75
12.75
12.75
12.75
12.75
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
12.75
12.75
12.75
12.75
12.75
12.75
12.75
12.75
24.5
24.5
27.0
31.0
32.0
32.0
38.0
38.0
D
E
F
G
H
12.75
12.75
12.75
12.75
12.75
12.75
12.75
12.75
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
25
25
29
32
32
38
42
42
38
38
38
38
50
50
50
62
11.0
14.0
16.0
18.5
18.5
21.0
26.0
26.0
Inlet
Outlet
Height Width Height Width
9.0
12.0
14.0
16.5
16.5
19.0
24.0
24.0
36
36
36
36
36
48
48
60
6.75
6.75
8.50
9.00
10.00
10.00
12.75
15.00
4.0
6.5
8.0
9.0
9.0
6.5
12.0
12.0
For complete dimensional information, see CAPS submittal drawings. All dimensions are in inches.
MSCF Weight Information
Unit
A
Size w/o Filter w/ Filter
15
20
25
30
45
50
65
85
80
95
105
118
132
151
197
226
107
126
140
157
176
202
263
302
B
C
12"
31
36
40
45
50
58
75
85
24"
57
68
75
84
94
108
141
170
Vertical
34
41
45
50
55
64
77
90
Sloped
D
HW
E
CW/DX
61
72
80
90
100
115
150
175
61
72
80
88
99
113
136
140
145
171
190
209
234
269
323
350
Fan
94
111
130
150
194
253
328
360
F
Motor
Total
50
50
60
75
75
100
125
140
144
161
190
225
269
353
453
500
For complete dimensional information, see CAPS submittal drawings. All dimensions are in pounds.
Model Number Code
The Model number system is designed to identify the fan. The correct code letters must be specified to designate size,
pressure rating, wheel type and horsepower. The remainder of the model number is determined by the size and
performance selected from pages 5 through 15.
MSCF - 15 - L
5
Wheel Type
FC - Forward Curved
Nominal Face Area
4
FC
Motor HP
Modular
Small
Cabinet
Fan
15 - 1.5 sq. ft.
45 - 4.5 sq. ft.
20 - 2.0 sq. ft.
50 - 5.0 sq. ft.
25 - 2.5 sq. ft.
65 - 6.5 sq. ft.
30 - 3.0 sq. ft
85 - 8.5 sq. ft.
Pressure Rating
L - Pressures up to 2.5 in. wg
H - Pressures up to 4 in. wg
4
3
5
7
=
=
=
=
1/4
1/3
1/2
3/4
(Belt Drive only)
10 = 1
50 = 5
15 = 1 1/2
75 = 7 1/2
20 = 2
100 = 10
30 = 3
MSCF General Data
Unit Size
Nominal CFM
Fan/Motor Data
RPM Range
HP Range
Max. BHP
CFM Range
Vertical Filter Data
Qty. & Size - in.
Area - ft2
Velocity - ft/min.
Sloped Filter Data
Qty. & Size - in.
Area - ft2
Velocity - ft/min.
Coil Data
Area - ft2
Width - in.
Length - in.
Velocity- ft/min.
1- Row
Max. gpm
Dry coil weight - lbs.
Wet coil weight - lbs.
2- Row
Max. gpm
Dry coil weight - lbs.
Wet coil weight - lbs.
4 - Row
Max. gpm
Dry coil weight - lbs.
Wet coil weight - lbs.
6- Row
Max. gpm
Dry coil weight - lbs.
Wet coil weight - lbs.
8 - Row
Max. gpm
Dry coil weight - lbs.
Wet coil weight - lbs.
15
800
20
1100
25
1350
30
1600
45
2250
50
2600
65
3350
85
4300
1100 - 3500
.25 - 2
2.1
300 - 800
1100 - 3500
.25 - 2
2.1
600 - 1100
800 - 3050
.25 - 3
3.15
900 - 1800
750 - 2500
.25 - 3
3.15
1200 - 2400
725 - 2400
.25 - 3
3.15
1500 - 2900
650 - 2200
.25 - 5
5.25
1800 - 3600
500 - 2000
.25 - 7.5
7.875
2400 - 4200
500 - 2200
.25 - 10
10.5
3000 - 5800
2- 9x18
1.8
444
1-12x12
1-12x24
2.5
440
2-14x18
3
450
1-16x16
1-16x20
3.4
471
2-16x24
4.8
469
2-18x24
5.4
481
2-24x24
7.2
465
1-12x24
2-24x24
8.9
483
1 - 12x12
1 - 12x24
2.5
320
1 - 16x16
1 - 16x20
3.4
324
2 - 16x20
3.8
355
1 - 12x24
1 - 24x24
5.3
302
2 - 24x24
7.2
313
2 - 24x24
7.2
361
4 - 24x24
14.4
233
2 - 12x24
4 - 24x24
17.8
242
1.6
7.50
31.00
500
2.2
10.00
31.00
500
2.7
12.50
31.00
500
3.2
15.00
31.00
500
4.5
15.00
43.00
500
5.2
17.50
43.00
500
6.7
22.50
43.00
500
8.6
22.50
55.00
500
20
6.2
7.6
28
8.1
10.0
35
10.5
13.6
42
12.3
16.0
42
14.7
19.2
48
17.9
24.0
62
24.7
33.6
62
28.2
37.5
20
9.5
12.1
28
12.6
16.2
35
16.1
20.5
42
19.2
24.4
42
23.6
30.6
48
28.3
38.6
62
37.5
51.6
62
44.2
61
10
16.2
21.5
14
21.3
28.3
16
27.1
35.9
20
32.3
42.7
20
41.1
55.0
24
50.0
69.1
30
63.7
88.1
30
77.0
106.8
10
22.8
30.6
14
30.1
40.5
16
38.3
51.3
20
45.5
61.0
20
58.7
79.6
24
70.5
97.6
30
90.1
124.8
30
110.0
152.7
10
31.3
43
14
41.0
56.5
16
50.8
70
20
60.5
83.5
20
79.2
110.6
24
92.0
128.6
30
117.6
164.5
30
144.0
201.5
MSCF Performance Chart
5.0
4.0
Static Pressure
H - High Pressure Wheels
ETL Listed for Fan Coil Unit
and in accordance with
UL/cUL 1995.
3.0
2.0
L - Low Pressure Wheels
1.0
R
0
1000
2000
3000
4000
5000
6000
7000
8000
CFM
5
MSCF Fan Data
3
15 L
21/2
1/2
36
38
2
9
25
63/4
4
2
11
11/2
155/8
All dimensions are in inches.
Total Static Pressure
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
RPM
BHP
350
1311
0.08
1567
0.11 1792
0.15
1994
0.20
2192
0.25
2376
0.30
2546
0.35
400
1421
0.11
1659
0.14 1869
0.18
2063
0.23
2241
0.29
2413
0.34
2583
450
1536
0.14
1761
0.18 1958
0.23
2137
0.27
2311
0.33
2471
0.39
2621
500
1650
0.18
1865
0.23 2052
0.28
2226
0.32
2384
0.37
2541
0.44
550
1768
0.23
1975
0.28 2154
0.33
2316
0.39
2472
0.44
2615
600
1887
0.28
2088
0.34 2258
0.40
2415
0.46
2562
0.52
650
2010
0.35
2203
0.41 2366
0.47
2518
0.54
2658
700
2134
0.42
2318
0.49 2478
0.56
2622
0.63
750
2259
0.51
2434
0.58 2592
0.66
2730
0.73
800
2386
0.61
2553
0.68 2707
0.76
2842
0.84
2.50
3.00
RPM
BHP
RPM
BHP
RPM
BHP
0.40
2741
0.46
3030
0.58
0.45
2777
0.52
3066
2689
0.50
2827
0.57
3103
0.65
3327
0.78
0.72
3364
0.49
2758
0.56
2895
0.64
0.86
3149
0.79
3401
2704
0.58
2835
0.63
2966
0.95
0.70
3217
0.87
3446
0.60
2794
0.66
2924
0.73
1.03
3046
0.79
3287
0.95
2760
0.70
2888
0.76
3014
2864
0.80
2989
0.87
3107
0.83
3135
0.90
3358
1.04
0.95
3225
1.02
3446
2969
0.92
3092
1.00
3208
1.17
1.07
3318
1.15
3
20 L
21/2
1/2
36
38
41/2
12
25
63/4
61/2
2
14
11/2
155/8
All dimensions are in inches.
Total Static Pressure
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
RPM
BHP
RPM
BHP
650
1627
0.20
1836
0.25 2019
0.29
2183
0.33
2332
0.38
2475
0.43
2614
0.48
2744
0.52
700
1718
0.24
1919
0.30 2096
0.34
2255
0.38
2402
0.44
2538
0.49
2671
0.54
2800
750
1810
0.29
2003
0.35 2174
0.40
2330
0.45
2474
0.50
2608
0.55
2733
0.60
2857
800
1906
0.34
2089
0.41 2255
0.47
2407
0.52
2547
0.56
2679
0.62
2803
0.68
850
2002
0.40
2177
0.48 2338
0.54
2485
0.59
2623
0.64
2751
0.69
2874
900
2100
0.46
2266
0.54 2422
0.62
2565
0.67
2700
0.73
2826
0.78
950
2198
0.53
2356
0.62 2507
0.70
2647
0.77
2778
0.83
2902
1000
2297
0.61
2447
0.70 2594
0.80
2731
0.87
2857
0.93
1050
2396
0.70
2539
0.79 2682
0.89
2815
0.97
2939
1.04
1100
2496
0.79
2635
0.89 2771
0.99
2900
1.09
3023
1.16
2.50
RPM
BHP
0.59
3039
0.69
0.66
3094
0.77
2919
0.74
3150
0.76
2989
0.82
3207
2945
0.84
3060
0.91
0.88
3019
0.94
3131
2979
0.99
3095
1.05
3058
1.11
3171
1.17
3137
1.23
3249
1.30
3.00
RPM
BHP
0.85
3366
0.97
0.94
3421
1.07
3271
1.04
3478
1.17
1.01
3341
1.14
3204
1.11
3412
1.26
3279
1.23
3483
1.38
3356
1.37
Performance shown is for installation type D: ducted inlet, ducted outlet. Power ratings (BHP/kW) does not include drive losses. Performance ratings do not
include the effects of appurtenances in the airstream. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication
210 and comply with the requirements of AMCA Certified Ratings Program.
6
MSCF Fan Data
3
25 L
21/2
1/2
36
38
41/2
14
29
81/2
8
2
16
11/2
143/4
All dimensions are in inches.
Total Static Pressure
0.25
0.50
0.75
1.00
1.25
1.50
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
925
1094
0.24
1252
0.32 1388
0.38
1512
0.44
1628
0.51
1000
1156
0.29
1308
0.38 1438
0.44
1559
0.51
1669
0.58
1777
0.66
1075
1219
0.35
1364
0.44 1492
0.52
1607
0.59
1716
0.67
1817
1150
1283
0.42
1422
0.51 1546
0.60
1657
0.68
1764
0.76
1862
1225
1348
0.50
1481
0.59 1602
0.69
1711
0.78
1812
0.86
1300
1414
0.58
1540
0.68 1658
0.79
1765
0.89
1863
1375
1479
0.67
1602
0.77 1716
0.89
1820
1.00
1450
1545
0.77
1665
0.89 1774
1.00
1876
1525
1612
0.89
1728
1.01 1833
1.12
1600
1678
1.01
1792
1.14 1892
1.26
1.75
2.00
RPM
BHP
RPM
BHP
0.74
1916
0.82
0.84
1957
1910
0.94
2001
0.92
2049
1.01
1.03
2089
0.97
1958
1.06
2048
1.15
2133
1916
1.10
2007
1.19
2096
1.28
1.13
1971
1.23
2059
1.33
2145
1933
1.26
2026
1991
1.40
2081
1.38
2113
1.48
1.53
2167
1.64
2.25
2.50
RPM
BHP
RPM
BHP
1.11
2176
1.21
2258
1.30
1.24
2217
1.33
2298
1.43
2180
1.38
2260
1.47
2339
1.57
1.43
2228
1.53
2307
1.62
2195
1.58
2276
1.69
2248
1.75
2325
1.86
3
25 H
21/2
1/2
36
38
41/2
14
29
81/2
8
2
16
11/2
143/4
All dimensions are in inches.
Total Static Pressure
1.00
1.25
1.50
1.75
2.00
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
900
1733
0.48
1837
0.55 1935
0.63
2026
0.70
1000
1837
0.60
1931
0.67 2025
0.74
2115
0.83
2199
0.91
1100
1944
0.73
2035
0.80 2120
0.88
2206
0.97
2289
1.06
1200
2049
0.88
2141
0.96 2224
1.05
2302
1.13
2380
1.22
1300
2153
1.04
2248
1.14 2330
1.24
2406
1.33
2479
1400
2258
1.24
2351
1.34 2438
1.45
2512
1.55
1500
2367
1.45
2456
1.57 2541
1.68
2620
1600
2479
1.69
2562
1.82 2645
1.94
1700
2592
1.95
2672
2.09 2750
2.23
1800
2707
2.24
2784
2.39 2858
2.54
2.25
BHP RPM
2.50
BHP
RPM
BHP
2368
1.15
2443
1.24
2458
1.32
2532
1.42
2550
1.51
2623
2583
1.65
2651
1.75
1.79
2689
1.90
2756
2724
2.06
2797
2.18
2827
2.36
2901
2.49
2932
2.68
3004
2.82
2.75
3.00
RPM
BHP
RPM
BHP
1.42
2603
1.52
2672
1.62
1.62
2693
1.73
2761
2717
1.85
2785
1.96
2851
2.01
2820
2.11
2882
2.22
2943
2.33
2862
2.30
2925
2.41
2986
2.52
3044
2.64
2970
2.61
3031
2.73
3.50
RPM
BHP
1.83
2889
2.04
2.07
2978
2.30
Performance shown is for installation type D: ducted inlet, ducted outlet. Power ratings (BHP/kW) does not include drive losses. Performance ratings do not
include the effects of appurtenances in the airstream. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication
210 and comply with the requirements of AMCA Certified Ratings Program.
7
MSCF Fan Data
3
30 L
21/2
1/2
36
38
61/2
161/2
32
9
9
2
181/2
11/2
141/2
All dimensions are in inches.
Total Static Pressure
0.25
0.50
0.75
1.00
1.25
1.50
1.75
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
1200
1057
0.36
1149
0.43 1232
0.49
1321
0.55
1409
0.62
1497
0.70
1300
1130
0.45
1216
0.52 1295
0.59
1375
0.66
1454
0.72
1538
1400
1199
0.54
1285
0.62 1361
0.70
1430
0.77
1508
0.85
1580
1500
1267
0.65
1355
0.74 1427
0.82
1495
0.90
1563
0.98
1600
1335
0.77
1426
0.88 1495
0.96
1560
1.05
1622
1700
1405
0.91
1497
1.03 1564
1.12
1627
1.21
1800
1474
1.06
1569
1.20 1633
1.29
1694
1900
1545
1.23
1642
1.38 1704
1.48
2000
1615
1.41
1709
1.58 1775
1.70
2100
1687
1.62
1777
1.79 1847
1.93
2.00
RPM
BHP
RPM
BHP
0.80
1618
0.88
0.92
1659
1634
1.06
1701
1.00
1734
1.09
1.14
1775
1.13
1688
1.22
1754
1.30
1817
1686
1.30
1743
1.39
1808
1.48
1.39
1752
1.48
1807
1.58
1863
1762
1.58
1818
1831
1.80
1886
1.69
1872
1.79
1.91
1938
2.02
1901
2.04
1953
2.15
2.25
2.50
RPM
BHP
RPM
BHP
1.23
1846
1.33
1913
1.42
1.38
1887
1.49
1953
1.59
1869
1.57
1928
1.66
1994
1.76
1.68
1923
1.77
1981
1.87
1923
1.89
1978
1.99
1988
2.13
3
30 H
21/2
1/
2
36
38
61/2
161/2
32
9
9
2
181/2
11/2
141/2
All dimensions are in inches.
Total Static Pressure
1.00
1.25
1.50
1.75
2.00
2.25
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
1450
1393
0.81
1461
0.89 1524
0.96
1596
1.05
1679
1.15
1550
1449
0.94
1517
1.03 1579
1.11
1637
1.19
1706
1.28
1784
1.39
1650
1498
1.08
1574
1.18 1635
1.27
1692
1.36
1746
1.44
1811
1750
1547
1.22
1628
1.34 1692
1.44
1748
1.54
1801
1.63
1852
1850
1598
1.39
1677
1.51 1749
1.64
1804
1.74
1857
1.83
1950
1648
1.56
1727
1.70 1800
1.83
1862
1.95
1913
2050
1698
1.74
1777
1.90 1849
2.04
1917
2.18
2150
1748
1.93
1828
2.11 1899
2.27
1965
2250
1798
2.14
1877
2.33 1949
2.51
2350
1849
2.37
1927
2.57 1999
2.77
2.50
RPM
BHP
1.54
1885
1.66
1.72
1912
1907
1.93
1955
2.06
1962
2.16
1970
2.30
2019
2.41
2028
2.55
2015
2.66
2078
2064
2.93
2126
3.00
RPM
BHP
1.82
2050
2.06
2.02
2077
2.26
2010
2.26
2104
2.41
2065
2.51
2154
2076
2.67
2122
2.79
2.82
2133
2.96
2179
3.09
2186
3.25
2236
3.50
3.75
RPM
BHP
RPM
BHP
2.46
2230
2.74
2290
2.87
2.72
2257
2.97
2317
3.11
2209
3.01
2292
3.23
2344
3.37
3.08
2265
3.32
2347
3.55
2386
3.66
3.39
2321
3.64
2402
3.89
2441
4.01
Performance shown is for installation type D: ducted inlet, ducted outlet. Power ratings (BHP/kW) does not include drive losses. Performance ratings do not
include the effects of appurtenances in the airstream. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication
210 and comply with the requirements of AMCA Certified Ratings Program.
8
MSCF Fan Data
3
45 L
21/2
1/
2
48
50
41/2
161/2
32
10
9
2
181/2
11/2
20
All dimensions are in inches.
Total Static Pressure
0.25
0.50
0.75
1.00
1.25
1.50
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
1500
974
0.43
1104
0.54 1224
0.64
1337
0.74
1446
0.85
1557
0.98
1650
1048
0.55
1162
0.67 1281
0.78
1383
0.89
1487
1.00
1586
1800
1123
0.70
1228
0.82 1338
0.94
1439
1.06
1530
1.18
1627
1950
1200
0.86
1297
1.00 1396
1.13
1496
1.26
1586
1.39
2100
1277
1.06
1367
1.20 1457
1.35
1553
1.49
1642
2250
1356
1.28
1440
1.43 1525
1.58
1611
1.74
2400
1437
1.54
1515
1.69 1594
1.85
1671
2550
1519
1.84
1591
1.98 1664
2.15
1739
2700
1601
2.17
1667
2.31 1736
2.49
2850
1684
2.54
1744
2.67 1811
2.86
1.75
2.00
RPM
BHP
RPM
BHP
1.12
1686
1.26
1.31
1718
1669
1.52
1759
1.44
1807
1.57
1.66
1844
1.63
1724
1.76
1801
1.90
1885
1699
1.89
1780
2.04
1855
2.19
2.02
1757
2.19
2.33
1815
2.51
1837
2.34
1911
1894
2.68
1968
1807
2.68
1876
1877
3.05
1944
2.87
1952
3.05
3.26
2010
3.46
2.50
2.75
RPM
BHP
RPM
BHP
1.80
2012
2.12
2098
2.31
2.06
2040
2.35
2118
2.52
1927
2.33
2081
2.66
2.50
1981
2.66
2122
2.99
2.85
2037
3.02
2025
3.23
2094
3.41
2082
3.65
3
45 H
21/2
1/2
48
50
41/2
161/2
32
10
9
2
181/2
11/2
20
All dimensions are in inches.
Total Static Pressure
1.00
1.25
1.50
1.75
2.00
2.25
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
1700
1434
1.01
1509
1.12 1585
1.22
1656
1.31
1722
1.41
1800
1481
1.15
1556
1.26 1627
1.37
1697
1.47
1763
1.57
1826
1.67
1900
1530
1.30
1603
1.42 1671
1.53
1738
1.65
1804
1.75
1866
2000
1578
1.45
1650
1.59 1717
1.71
1781
1.83
1845
1.95
1907
2100
1626
1.62
1698
1.77 1764
1.90
1827
2.03
1887
2.15
2200
1675
1.80
1746
1.96 1812
2.10
1874
2.24
1932
2300
1724
1.99
1795
2.16 1860
2.32
1921
2.47
2400
1774
2.19
1843
2.37 1908
2.55
1969
2500
1824
2.42
1893
2.60 1956
2.79
2600
1873
2.65
1942
2.85 2005
3.04
2.50
RPM
BHP
1.86
1925
1.96
2.06
1966
1948
2.28
2007
2.37
1990
2.50
1979
2.61
2034
2.71
2026
2.86
2017
2.97
2073
2065
3.24
2121
2.75
RPM
BHP
2.17
2022
2.28
2.40
2063
2048
2.63
2104
2.75
2090
2.88
2080
3.01
2133
3.13
2127
3.28
3.41
2174
3.57
3.00
RPM
BHP
2.51
2117
2.63
2.76
2157
2145
3.02
2198
3.15
2187
3.29
2179
3.43
2229
2226
3.73
2275
3.25
RPM
BHP
2.88
2209
3.00
3.15
2249
3.28
2239
3.43
2290
3.57
3.58
2281
3.73
2332
3.88
3.89
2323
4.05
2373
4.20
Performance shown is for installation type D: ducted inlet, ducted outlet. Power ratings (BHP/kW) does not include drive losses. Performance ratings do not
include the effects of appurtenances in the airstream. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication
210 and comply with the requirements of AMCA Certified Ratings Program.
9
MSCF Fan Data
3
50 L
21/2
1/
2
48
50
81/2
19
42
10
61/2
2
21
11/2
20
All dimensions are in inches.
Total Static Pressure
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
RPM
BHP
RPM
BHP
1800
864
0.48
932
0.52 1031
0.60
1128
0.70
1220
0.80
1305
0.88
1387
0.99
1464
1.11
2000
945
0.64
1008
0.69 1082
0.76
1172
0.86
1258
0.97
1342
1.07
1420
1.17
1495
2200
1027
0.84
1086
0.90 1140
0.95
1221
1.05
1302
1.16
1380
1.29
1457
1.40
1529
2400
1109
1.07
1165
1.14 1216
1.20
1274
1.28
1350
1.39
1425
1.52
1496
1.65
2600
1192
1.35
1244
1.43 1293
1.50
1339
1.56
1402
1.66
1471
1.78
1540
2800
1271
1.65
1325
1.76 1371
1.84
1415
1.91
1456
1.97
1523
2.10
3000
1352
1.99
1406
2.14 1450
2.22
1492
2.30
1532
2.37
1576
3200
1432
2.38
1488
2.57 1530
2.66
1570
2.75
1609
2.83
3400
1513
2.82
1571
3.05 1611
3.15
1649
3.25
1686
3.34
3600
1595
3.31
1654
3.60 1692
3.70
1729
3.81
1764
3.90
2.50
3.00
RPM
BHP
RPM
BHP
1.28
1635
1.53
1.51
1665
1566
1.78
1699
1.75
1793
2.02
2.01
1823
1.92
1607
2.07
2.28
1736
2.34
1855
1587
2.23
1651
2.59
2.38
1773
2.70
1892
2.46
1639
2.60
2.98
1698
2.73
1817
3.07
1645
2.90
1692
1722
3.42
1756
3.01
1750
3.16
1862
3.47
3.50
1803
3.63
1799
4.00
1832
4.09
1864
4.17
3
50 H
21/2
1/2
48
50
81/2
19
42
10
61/2
2
21
11/2
20
All dimensions are in inches.
Total Static Pressure
1.00
1.50
2.00
2.25
2.50
2.75
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
2100
1425
1.39
1550
1.63 1663
1.85
1709
1.92
1753
1.99
2200
1470
1.54
1590
1.80 1701
2.04
1753
2.15
1796
2.22
1837
2.29
2300
1515
1.71
1631
1.98 1741
2.24
1792
2.36
1839
2.47
1880
2400
1561
1.89
1671
2.18 1780
2.45
1831
2.58
1879
2.70
1924
2500
1607
2.08
1714
2.39 1820
2.67
1870
2.81
1918
2.94
2600
1652
2.30
1758
2.61 1860
2.91
1910
3.06
1957
2700
1697
2.54
1803
2.84 1901
3.17
1950
3.32
2800
1741
2.79
1848
3.09 1942
3.44
1990
2900
1787
3.06
1894
3.36 1985
3.72
2031
3000
1832
3.35
1940
3.64 2029
4.01
2072
3.00
RPM
BHP
2.54
1920
2.62
2.81
1963
1964
3.07
2006
3.20
2003
3.34
1997
3.47
2042
3.59
2037
3.75
3.89
2077
4.05
4.19
2118
4.37
3.25
RPM
BHP
2.89
2001
2.97
3.18
2044
2047
3.47
2087
3.61
2086
3.76
2082
3.90
2125
4.05
2121
4.21
2164
4.37
2161
4.53
3.50
RPM
BHP
3.27
2080
3.35
3.58
2123
3.67
2129
3.90
2167
4.01
2167
4.20
4.00
RPM
BHP
2193
3.83
Performance shown is for installation type D: ducted inlet, ducted outlet. Power ratings (BHP/kW) does not include drive losses. Performance ratings do not
include the effects of appurtenances in the airstream. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication
210 and comply with the requirements of AMCA Certified Ratings Program.
10
MSCF Fan Data
3
65 L
21/2
1/
2
48
50
83/4
24
42
123/4
2
12
26
11/2
185/8
All dimensions are in inches.
Total Static Pressure
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.50
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
RPM
BHP
RPM
BHP
2575
768
0.66
858
0.79
940
0.93
1.08
1.22
1.36
1231
1.51
1296
1.67
2750
810
0.78
893
0.93
971
1.06
1047
1.22
1119
1.38
1187
1.53
1251
1.67
1315
1.84
1435
2.17
2925
851
0.92
930
1.07 1005
1.22
1077
1.38
1146
1.55
1213
1.72
1276
1.87
1335
2.03
1454
3100
894
1.08
967
1.24 1040
1.40
1107
1.56
1175
1.74
1238
1.91
1301
2.09
1360
2.25
3275
936
1.26
1005
1.42 1075
1.59
1140
1.76
1205
1.94
1267
2.13
1327
2.31
1385
3450
979
1.45
1044
1.62 1110
1.80
1175
1.98
1235
2.15
1296
2.36
1354
2.55
3625
1022
1.67
1083
1.83 1148
2.03
1209
2.22
1268
2.40
1326
2.60
1383
2.81
3800
1065
1.90
1124
2.08 1185
2.28
1244
2.48
1302
2.67
1357
2.86
1413
3975
1109
2.16
1165
2.35 1223
2.55
1280
2.76
1337
2.96
1390
3.16
4150
1153
2.44
1207
2.64 1261
2.84
1317
3.06
1372
3.28
1424
3.49
1018
1093
1162
RPM
BHP
2.38
1562
2.73
1474
2.60
1581
2.98
2.49
1494
2.84
1601
3.24
1411
2.75
1519
3.12
1620
3.51
1437
3.02
1544
3.42
1642
3.80
3.09
1466
3.31
1569
3.74
1443
3.38
1495
3.61
1595
4.07
1474
3.69
1525
3.94
1622
4.42
3
RPM
3.00
CFM
BHP
65 H
21/2
1/2
48
50
83/4
24
42
123/4
2
12
26
11/2
185/8
All dimensions are in inches.
Total Static Pressure
1.00
1.50
2.00
2.25
2.50
2.75
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
2400
1186
1.30
1280
1.50 1394
1.77
1449
1.90
1501
2.04
2575
1243
1.53
1335
1.75 1430
2.00
1484
2.15
1536
2.30
1586
2.45
2750
1296
1.77
1391
2.04 1471
2.27
1520
2.42
1572
2.58
1621
2925
1349
2.04
1448
2.35 1526
2.60
1563
2.72
1608
2.88
1657
3100
1403
2.33
1505
2.70 1582
2.97
1618
3.10
1653
3.23
3275
1458
2.66
1559
3.06 1638
3.37
1674
3.51
1708
3450
1511
3.01
1612
3.44 1695
3.81
1730
3.96
3625
1563
3.39
1666
3.85 1753
4.29
1787
3800
1616
3.80
1720
4.30 1805
4.76
3975
1669
4.24
1775
4.78 1859
5.27
3.00
3.25
RPM
BHP
RPM
BHP
2.74
1668
2.89
1714
3.05
3.05
1704
3.22
1749
1693
3.38
1740
3.56
1785
3.65
1741
3.78
1776
3.93
1763
4.11
1796
4.25
1827
4.45
1820
4.60
1852
4.76
1845
4.98
1877
5.14
1908
1898
5.50
1934
5.72
1965
3.50
RPM
BHP
3.39
1793
3.55
3.75
1828
1821
4.13
1864
4.39
1858
4.53
1882
4.91
1913
5.31
1938
5.47
1968
5.90
1995
6.07
4.00
RPM
BHP
3.92
1911
4.28
4.32
1947
4.70
1901
4.74
1982
5.14
5.06
1942
5.21
5.63
1997
5.78
Performance shown is for installation type D: ducted inlet, ducted outlet. Power ratings (BHP/kW) does not include drive losses. Performance ratings do not
include the effects of appurtenances in the airstream. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication
210 and comply with the requirements of AMCA Certified Ratings Program.
11
MSCF Fan Data
3
85 L
21/2
1/
2
60
62
61/2
24
42
15
2
12
26
11/2
231/2
All dimensions are in inches.
Total Static Pressure
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.50
3.00
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
RPM
BHP
RPM
BHP
RPM
BHP
RPM
3000
797
0.85
899
1.03
983
1.22
1056
1.38
1135
1.60
1209
1.81
1278
2.00
1344
2.19
1464
2.54
BHP
3200
838
1.00
935
1.19 1018
1.40
1090
1.58
1160
1.78
1233
2.01
1300
2.23
1366
2.44
1486
3400
880
1.18
970
1.37 1053
1.60
1124
1.80
1188
1.99
1258
2.22
1325
2.46
1388
2.70
1507
2.82
1594
3.19
3.12
1616
3600
923
1.37
1006
1.58 1088
1.81
1159
2.04
1222
2.24
1283
2.45
1350
2.71
1412
2.96
3.53
1529
3.44
1638
3800
965
1.59
1042
1.81 1123
2.04
1194
2.29
1256
2.51
1314
2.73
1375
2.97
1437
3.88
3.24
1551
3.77
4000
1008
1.83
1079
2.06 1159
2.29
1228
2.56
1291
2.81
1348
3.04
1402
3.26
4200
1052
2.10
1118
2.33 1195
2.58
1264
2.85
1326
3.12
1383
3.37
1436
3.61
1462
3.53
1576
4.10
1487
3.84
1600
4400
1096
2.39
1159
2.63 1231
2.89
1299
3.16
1361
3.45
1417
3.73
1470
4.44
3.98
1520
4.22
1625
4600
1141
2.71
1201
2.96 1267
3.23
1335
3.49
1396
3.80
1452
4.10
4.80
1504
4.37
1554
4.64
4800
1186
3.06
1243
3.32 1303
3.59
1371
3.87
1431
4.18
1487
4.50
1539
4.80
1588
5.07
3
85 H
21/2
1/2
60
62
61/2
24
42
15
2
12
26
11/2
231/2
All dimensions are in inches.
Total Static Pressure
1.00
1.50
2.00
2.25
2.50
2.75
3.00
3.25
3.50
4.00
CFM
RPM
BHP
RPM
BHP RPM
BHP RPM
BHP RPM
BHP RPM
BHP
RPM
BHP
RPM
BHP
RPM
BHP
RPM
BHP
3500
1330
2.54
1424
2.91 1540
3.36
1594
3.57
1658
3.84
1720
4.11
1780
4.38
1838
4.64
1898
4.96
2013
5.58
3750
1398
3.00
1488
3.41 1588
3.85
1641
4.09
1692
4.32
1747
4.58
1807
4.88
1864
5.16
1919
5.44
2030
6.07
4000
1460
3.50
1553
3.96 1636
4.39
1688
4.65
1738
4.90
1787
5.15
1834
5.40
1891
5.72
1946
6.02
2051
6.63
4250
1522
4.06
1620
4.57 1698
5.03
1737
5.26
1786
5.54
1834
5.81
1880
6.07
1924
6.33
1973
6.63
2078
7.29
4500
1586
4.68
1687
5.24 1763
5.73
1799
5.97
1834
6.22
1881
6.51
1927
6.80
1971
7.08
2013
7.36
2105
7.98
4750
1650
5.37
1751
5.97 1828
6.51
1863
6.76
1898
7.02
1931
7.27
1975
7.58
2018
7.88
2060
8.18
2141
8.77
5000
1716
6.12
1813
6.76 1895
7.35
1929
7.62
1962
7.90
1995
8.17
2026
8.43
2066
8.74
2108
9.07
2188
9.70
5250
1785
6.95
1876
7.62 1962
8.27
1996
8.56
2028
8.85
2060
9.13
2091
9.42
2121
9.70
2156
10.01
5500
1853
7.86
1940
8.56 2025
9.25
2063
9.58
2095
9.88
5750
1923
8.84
2004
9.58
Performance shown is for installation type D: ducted inlet, ducted outlet. Power ratings (BHP/kW) does not include drive losses. Performance ratings do not
include the effects of appurtenances in the airstream. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication
210 and comply with the requirements of AMCA Certified Ratings Program.
12
MSCF Plenum Data
Access plenums are available to be placed between any
module providing additional access, space for mounting
controls, or reducing turbulent air.
Plenum Module
Size
A
15
20
25
30
45
50
65
85
38
38
38
38
50
50
50
62
B
12
12.75
12.75
12.75
12.75
12.75
12.75
12.75
12.75
24
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
C
11
14
16
18.5
18.5
21
26
26
Weight
12
24
29
54
34
64
40
75
46
86
53
99
61 114
70 131
80 151
C
A
B
All dimensions are in inches.
13
MSCF Coil Data
Steam - 1 Row
Dimensional Data
Size Face
15
1.6
20
2.2
25
2.7
30
3.2
45
4.5
50
5.2
65
6.7
85
8.6
A
38
38
38
38
50
50
50
62
B
15.5
15.5
15.5
15.5
15.5
15.5
15.5
15.5
C
7.75
7.75
7.75
7.75
7.75
7.75
7.75
7.75
D
3.31
3.00
3.31
3.00
3.00
4.31
3.00
3.00
E
1.5
1.5
2.5
2.5
2.5
2.5
2.5
2.5
F
5.18
6.50
7.69
9.00
9.00
10.18
12.50
12.50
G
11.0
14.0
16.0
18.5
18.5
21.0
26.0
26.0
G
All dimensions are in inches.
F
D
A
E
C
Performance Data
Refer to CAPS 2.1 for performance data information.
14
B
MSCF Coil Data
Steam - 2 Row
Dimensional Data
Size Face
15
1.6
20
2.2
25
2.7
30
3.2
45
4.5
50
5.2
65
6.7
85
8.6
A
38
38
38
38
50
50
50
62
B
15.5
15.5
15.5
15.5
15.5
15.5
15.5
15.5
C
7.75
7.75
7.75
7.75
7.75
7.75
7.75
7.75
D
3.31
3.00
3.31
3.00
3.00
4.31
3.00
3.00
E
1.5
1.5
2.5
2.5
2.5
2.5
2.5
2.5
F
5.18
6.50
7.69
9.00
9.00
10.18
12.50
12.50
G
11.0
14.0
16.0
18.5
18.5
21.0
26.0
26.0
G
All dimensions are in inches.
F
D
A
E
C
Performance Data
B
Refer to CAPS 2.1 for performance data information.
15
MSCF COIL Data
Hot Water - 1 Row
Dimensional Data
Size Face
15
1.6
20
2.2
25
2.7
30
3.2
45
4.5
50
5.2
65
6.7
85
8.6
A
38
38
38
38
50
50
50
62
B
12.75
12.75
12.75
12.75
12.75
12.75
12.75
12.75
C
11.0
14.0
16.0
18.5
18.5
21.0
26.0
26.0
D
2.25
3.19
3.19
3.19
3.19
3.19
3.19
3.19
E
3.0
4.5
4.0
4.0
4.0
4.0
4.0
4.0
H
0.75
0.75
0.88
0.88
0.88
1.13
1.38
1.38
3
E
C
H
All dimensions are in inches.
D
A
6
B
Performance Data
Heating Capacities based on 60°F EAT and 180°F EWT.
1.0 GPM
CFM MBH LAT LWT WPD
400 14.0 92.2 151.4 0.08
600 16.1 84.8 147.0 0.08
800 17.6 80.3 144.0 0.08
MBH
16.4
19.4
21.7
2.0 GPM
LAT LWT
97.7 163.3
89.9 160.1
85.0 157.8
20
700
900
1100
18.6
20.0
21.1
84.5 142.0 0.04
80.5 139.1 0.04
77.7 136.9 0.04
23.0
25.3
27.1
90.3 156.4 0.16
85.9 154.1 0.16
82.7 152.3 0.16
25.1 93.0 162.9 0.35
27.8 88.5 161.0 0.35
30.1 85.2 159.5 0.35
26.3 94.6 166.5 0.60
29.3 90.0 165.0 0.60
31.8 86.7 163.7 0.60
27.1 95.7 168.9 0.92
30.3 91.1 167.6 0.92
33.0 87.7 166.5 0.92
25
1000
1150
1300
22.1
22.8
23.5
80.3 135.0 0.03
78.3 133.4 0.03
76.7 132.0 0.03
28.5
29.9
31.1
86.3 150.9 0.11
84.0 149.5 0.11
82.1 148.2 0.11
31.7 89.2 158.4 0.23
33.4 86.8 157.2 0.23
34.9 84.8 156.2 0.23
33.6 90.9 162.8 0.40
35.5 88.5 161.8 0.40
37.3 86.5 160.9 0.40
34.8 92.1 165.7 0.60
37.0 89.7 164.9 0.60
38.9 87.6 164.1 0.60
30
1200
1400
1600
24.3
25.2
25.9
78.7 130.5 0.02
76.6 128.7 0.02
74.9 127.2 0.02
32.3
33.9
35.3
84.8 147.0 0.08
82.3 145.4 0.08
80.3 144.0 0.08
36.4 87.9 155.2 0.16
38.5 85.3 153.8 0.16
40.3 83.2 152.6 0.16
38.9 89.9 160.1 0.28
41.3 87.2 158.9 0.28
43.4 85.0 157.8 0.28
40.6 91.2 163.4 0.43
43.2 88.5 162.3 0.43
45.6 86.3 161.3 0.43
2.0 GPM
CFM MBH LAT LWT WPD
1650 42.0 83.5 137.2 0.09
1950 44.1 80.9 135.0 0.09
2250 45.9 78.9 133.2 0.09
MBH
51.9
55.2
58.1
4.0 GPM
LAT LWT
89.0 153.5
86.1 151.8
83.8 150.3
MBH
56.4
60.4
63.9
1800
2200
2600
83.1 133.9 0.07
80.0 131.3 0.07
77.7 129.1 0.07
56.7
61.1
64.7
89.1 151.0 0.24
85.6 148.8 0.24
82.9 147.0 0.24
4.0 GPM
CFM MBH LAT LWT WPD
2575 69.8 85.0 144.4 0.15
2925 72.8 82.9 142.9 0.15
3275 75.4 81.2 141.5 0.15
MBH
78.2
82.0
85.4
LAT
88.0
85.8
84.0
15
45
50
65
85
3000
3600
4250
45.2
47.8
49.9
82.7
87.6
92.1
WPD
0.28
0.28
0.28
WPD
0.32
0.32
0.32
6.0 GPM
LWT WPD
153.4 0.32
152.1 0.32
150.9 0.32
MBH
17.4
20.9
23.6
6.0 GPM
LAT LWT
91.5 160.8
88.6 159.4
86.2 158.2
WPD
0.60
0.60
0.60
WPD
0.69
0.69
0.69
62.1 91.8 158.8 0.51
67.4 88.3 157.0 0.51
71.9 85.5 155.5 0.51
MBH
78.2
82.0
85.4
LAT
88.0
85.8
84.0
8.0 GPM
LWT WPD
153.4 0.32
152.1 0.32
150.9 0.32
MBH
18.0
21.8
24.7
MBH
59.0
63.4
67.4
4.0 GPM
LAT LWT
101.4 170.8
93.4 168.9
88.4 167.4
8.0 GPM
LAT LWT
93.0 164.9
90.0 163.8
87.6 162.8
WPD
1.04
1.04
1.04
WPD
1.18
1.18
1.18
65.3 93.5 163.3 0.88
71.2 89.8 161.8 0.88
76.2 87.0 160.5 0.88
MBH
86.7
91.4
95.7
LAT
91.0
88.8
87.0
10.0 GPM
LWT WPD
162.3 0.83
161.3 0.83
160.4 0.83
MBH
18.3
22.3
25.4
MBH
60.7
65.4
69.6
5.0 GPM
LAT LWT
102.3 172.5
94.3 170.9
89.3 169.6
10.0
LAT
93.9
90.9
88.5
GPM
LWT
167.6
166.6
165.7
WPD
1.60
1.60
1.60
WPD
1.79
1.79
1.79
67.4 94.5 166.2 1.34
73.7 90.9 164.9 1.34
79.1 88.1 163.8 1.34
MBH
89.1
94.2
98.8
12.0 GPM
LAT LWT WPD
91.9 164.8 1.17
89.7 163.9 1.17
87.8 163.2 1.17
85.7 137.8 0.17 93.5 88.7 148.2 0.35 100.0 90.7 154.4 0.60 104.4 92.1 158.6 0.90 107.6 93.1 161.6 1.27
82.4 135.3 0.17 99.9 85.6 146.0 0.35 107.5 87.5 152.5 0.60 112.7 88.9 157.0 0.90 116.4 89.8 160.1 1.27
80.0 133.1 0.17 105.8 83.0 144.0 0.35 114.4 84.8 150.8 0.60 120.4 86.1 155.4 0.90 124.7 87.1 158.7 1.27
MBh - Million British Thermal Units Per Hour
LAT - Leaving Air Temperature (°F) - Do not operate at over 105 °F.
LWT - Leaving Water Temperature (°F)
WPD - Water Pressure Drop
GPM - Gallons per Minute
16
3.0 GPM
LAT LWT
100.1 168.
92.1 165.7
87.2 163.9
MSCF COIL Data
Hot Water - 2 Row
Dimensional Data
Size Face
15
1.6
20
2.2
25
2.7
30
3.2
45
4.5
50
5.2
65
6.7
85
8.6
A
38
38
38
38
50
50
50
62
B
12.75
12.75
12.75
12.75
12.75
12.75
12.75
12.75
C
11.0
14.0
16.0
18.5
18.5
21.0
26.0
26.0
D
2.25
3.19
3.19
3.19
3.19
3.19
3.19
3.19
E
3.0
4.5
4.0
4.0
4.0
4.0
4.0
4.0
H
0.75
0.75
0.88
0.88
0.88
1.13
1.38
1.38
3
E
C
H
All dimensions are in inches.
D
A
6
B
Performance Data
Heating Capacities based on 60°F EAT and 180°F EWT.
15
20
1.0 GPM
CFM MBH LAT LWT WPD
400 21.9 110.4 135.4 0.09
600 25.6 99.3 127.8 0.09
800 28.1 92.4 122.7 0.10
CFM
700
900
1100
MBH
37.0
41.1
44.4
2.0 GPM
LAT LWT
108.8 142.2
102.2 138.0
97.2 134.7
WPD
0.20
0.21
0.21
MBH
25.9
31.7
36.0
2.0 GPM
LAT LWT
119.8 153.5
108.8 147.6
101.5 143.3
WPD
0.32
0.33
0.33
MBH
27.6
34.4
39.6
3.0 GPM
LAT LWT
123.7 161.2
112.9 156.5
105.6 153.0
WPD
0.67
0.68
0.68
MBH
28.6
35.9
41.7
4.0 GPM
LAT LWT
125.8 165.4
115.2 161.6
108.0 158.7
WPD
1.13
1.13
1.14
MBH
29.1
36.9
43.1
5.0 GPM
LAT LWT
127.2 168.1
116.7 164.9
109.6 162.4
WPD
1.70
1.70
1.70
MBH
40.7
45.9
50.1
4.0 GPM
LAT LWT
113.6 152.3
107.0 148.7
102.0 145.9
WPD
0.42
0.43
0.43
MBH
42.8
48.7
53.6
6.0 GPM
LAT LWT
116.4 158.1
109.9 155.1
104.9 152.6
WPD
0.71
0.71
0.72
MBH
44.2
50.5
55.8
8.0 GPM
LAT LWT
118.2 161.9
111.8 159.3
106.8 157.2
WPD
1.07
1.07
1.07
MBH
45.2
51.8
57.5
10.0 GPM
LAT LWT
119.5 164.6
113.1 162.3
108.2 160.4
WPD
1.49
1.49
1.49
25
1000 45.6 102.1 133.5 0.14
1150 48.1 98.5 131.0 0.14
1300 50.2 95.6 128.9 0.14
51.5 107.5 144.9 0.30
54.8 103.9 142.7 0.30
57.6 100.9 140.8 0.30
55.0 110.7 151.9 0.50
58.8 107.1 150.0 0.50
62.1 104.1 148.3 0.50
57.4 112.9 156.5 0.75
61.5 109.3 154.8 0.75
65.2 106.3 153.3 0.75
59.0 114.4 159.9 1.04
63.4 110.9 158.4 1.04
67.4 107.8 157.0 1.04
30
1200
1400
1600
-
-
51.2
53.9
56.2
99.3 127.8 0.11
95.5 125.0 0.11
92.4 122.7 0.11
63.4 108.8 147.6 0.37
68.0 104.8 145.3 0.37
72.0 101.5 143.3 0.37
66.6 111.1 152.8 0.56
71.7 107.2 150.7 0.56
76.1 103.9 148.9 0.56
68.8 112.9 156.5 0.78
74.3 109.0 154.7 0.78
79.2 105.6 153.0 0.78
CFM
1650
1950
2250
MBH
83.1
89.1
94.2
LAT
106.5
102.1
98.6
MBH
91.6
99.2
105.8
LAT
111.2
106.9
103.3
45
-
-
4.0 GPM
LWT WPD
137.6 0.46
134.6 0.46
132.0 0.47
6.0 GPM
LWT WPD
148.8 0.96
146.2 0.96
144.0 0.96
MBH
96.5
105.0
112.6
8.0 GPM
LAT LWT WPD
113.9 155.3 1.61
109.7 153.2 1.61
106.1 151.2 1.62
MBH
99.7
108.9
117.0
LAT
115.7
111.5
108.0
10.0 GPM
LWT WPD
159.6 2.41
157.7 2.42
156.1 2.42
MBH
101.9
111.6
120.2
LAT
117.0
112.8
109.3
12.0 GPM
LWT WPD
162.6 3.36
161.0 3.36
159.5 3.37
50
1800 90.1 106.1 134.1 0.36 100.2 111.3 145.9 0.75 106.0 114.3 152.9 1.26 109.8 116.3 157.5 1.88 112.5 117.6 160.8 2.62
2200 97.6 100.9 130.3 0.36 109.9 106.1 142.6 0.75 117.2 109.1 150.1 1.26 121.9 111.1 155.1 1.89 125.3 112.5 158.6 2.63
2600 103.7 96.8 127.1 0.36 118.1 101.9 139.8 0.75 126.7 104.9 147.6 1.26 132.4 107.0 152.9 1.89 136.5 108.4 156.7 2.63
65
2575 109.7 99.3 124.1 0.24 125.8 105.1 137.2 0.50
2925 115.2 95.7 121.3 0.24 132.6 101.8 134.9 0.50
3275 118.8 93.5 119.5 0.24 138.6 99.0 132.9 0.50
85
3000 126.5 98.9 115.6 0.27 147.2 105.2 130.0 0.56 159.8 109.1 139.2 0.93 168.2 111.7 145.6 1.39 174.3 113.6 150.3 1.94
3600 134.0 94.3 111.8 0.27 158.1 100.5 126.3 0.56 173.1 104.3 135.9 0.93 183.3 107.0 142.6 1.40 190.7 108.9 147.5 1.94
4250 140.6 90.5 108.5 0.27 167.9 96.4 123.0 0.56 185.3 100.2 132.8 0.94 197.3 102.8 139.7 1.40 206.0 104.7 144.9 1.94
83.3 89.8 158.7 0.55 142.0 110.8 151.0 1.25 146.6 112.5 155.0 1.74
87.6 87.6 157.6 0.55 151.0 107.6 149.1 1.25 156.3 109.3 153.4 1.74
91.5 85.8 156.6 0.55 159.1 104.8 147.5 1.25 165.1 106.5 151.9 1.75
MBh - Million British Thermal Units Per Hour
LAT - Leaving Air Temperature (°F) - Do not operate at over 105 °F.
LWT - Leaving Water Temperature (°F)
WPD - Water Pressure Drop
GPM - Gallons per Minute
17
MSCF
COIL Data
Hot Water - 4 Row
Dimensional Data
Size Face A B
C
D
E
F
G
15
1.6 38 15.50 9.38 3.188 0.750 4.0 11.0
20
2.2 38 15.50 9.38 3.188 0.750 4.5 14.0
25
2.7 38 15.50 9.38 3.188 0.875 4.0 16.0
30
3.2 38 15.50 9.38 3.188 0.875 4.0 18.8
45
4.5 50 15.50 9.38 3.188 1.375 4.0 21.0
50
5.2 50 15.50 9.38 3.188 1.375 4.0 26.0
65
6.7 50 15.50 9.38 3.188 1.375 4.0 26.0
85
8.6 62 12.75 9.38 3.188 1.375 4.0 26.0
G
F
All dimensions are in inches.
D
A
E
C
B
Performance Data
Refer to CAPS 2.1 for performance data information.
18
MSCF Coil Data
Electrical
Dimensional and Performance Data
Refer to CAPS 2.1 for dimensional and performance data information.
19
MSCF COIL Data
Chilled Water
Size Face A
4, 6 or 8 Row
15
20
25
30
45
50
65
85
Dimensional Data
1.6
2.2
2.7
3.2
4.5
5.2
6.7
8.6
38
38
38
38
50
50
50
62
B
C
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
11.0
14.0
16.0
18.5
18.5
21.0
26.0
26.0
4
10
10
10
10
10
10
10
10
J
6
12
12
12
12
12
12
12
12
K
8
14
14
14
14
14
14
14
14
4&6
0.75
0.75
0.88
0.88
0.88
1.38
1.38
1.38
8
1.38
1.38
1.38
1.38
1.38
1.63
1.63
1.63
All dimensions are in inches.
3.88
3
K
.75
C
1
1.5 3.75
2
6.5
J
13.25
A
B
18.5
Performance Data
Cooling Capacities based on 80°F DB, 67°F WB, and 45°F EWT.
Coil Rows
Unit Size
4
15 6
8
4
20 6
8
4
25 6
8
4
30 6
8
CFM
400
600
800
400
600
800
400
600
800
700
900
1100
700
900
1100
700
900
1100
1000
1150
1300
1000
1150
1300
1000
1150
1300
1200
1400
1600
1200
1400
1600
1200
1400
1600
TC
17.0
23.1
28.3
20.2
27.9
35.0
22.0
31.1
39.4
27.8
33.4
38.5
33.6
40.9
47.7
37.0
45.7
53.9
38.4
42.5
46.3
46.6
51.9
57.1
51.8
58.2
64.2
46.1
51.5
56.5
55.9
63.0
70.0
62.2
70.7
78.9
6º F
LWB
SC
LDB
11.1
15.3
19.0
12.9
18.1
22.9
13.8
19.8
25.4
18.4
22.3
25.9
21.6
26.7
31.4
23.5
29.3
34.7
25.5
28.3
31.1
30.2
33.9
37.5
33.0
37.3
41.4
30.6
34.4
38.0
36.3
41.2
45.8
39.6
45.3
50.8
54.6
56.7
58.3
50.6
52.4
53.8
48.4
49.8
51.0
56.0
57.4
58.5
51.8
52.9
53.9
49.2
50.2
51.2
56.7
57.5
58.1
52.4
53.0
53.6
49.8
50.4
50.9
56.7
57.5
58.3
52.4
53.1
53.8
49.8
50.4
51.0
53.1
54.6
55.7
50.0
51.5
52.6
48.2
49.4
50.5
54.1
55.1
55.8
51.0
52.0
52.8
49.0
49.9
50.6
54.6
55.1
55.6
51.5
52.1
52.6
49.4
49.9
50.4
54.6
55.2
55.7
51.5
52.1
52.6
49.4
50.0
50.5
GPM
6.0
9.0
12.1
6.0
9.0
12.1
6.0
9.0
12.1
10.6
13.6
16.6
10.6
13.6
16.6
10.6
13.6
16.6
15.1
17.3
19.6
15.1
17.3
19.6
15.1
17.3
19.6
18.1
21.1
24.1
18.1
21.1
24.1
18.1
21.1
24.1
WPD
4.6
9.3
15.2
6.9
13.9
22.9
9.3
18.6
30.6
7.5
11.6
16.4
11.2
17.3
24.5
14.9
23.0
32.6
9.6
12.3
15.2
14.3
18.3
22.6
19.0
24.2
29.9
9.9
12.9
16.3
14.6
19.0
24.0
19.2
25.1
31.7
TC
SC
15.2
20.6
25.5
18.0
25.1
31.3
19.9
28.1
35.7
24.9
30.0
34.7
29.9
36.5
42.7
33.5
41.4
48.7
34.4
38.2
41.6
41.8
46.5
51.3
46.8
52.6
58.1
41.3
46.0
50.9
50.1
56.4
62.6
56.7
63.8
71.3
10.3
14.3
17.8
11.9
16.9
21.4
12.9
18.5
23.7
17.1
20.9
24.3
20.1
24.8
29.3
22.0
27.4
32.5
23.8
26.5
29.1
28.1
31.6
34.9
30.8
34.8
38.7
28.5
32.2
35.7
33.7
38.4
42.8
37.0
42.3
47.5
10º F
LDB
LWB
56.4
58.3
59.6
52.7
54.3
55.5
50.5
51.8
52.9
57.6
58.8
59.8
53.8
54.8
55.7
51.3
52.2
53.0
58.3
58.9
59.5
54.3
54.9
55.4
51.8
52.3
52.8
58.3
59.0
59.6
54.3
54.9
55.5
51.8
52.4
52.9
54.8
56.0
57.0
52.2
53.4
54.3
50.2
51.4
52.3
55.6
56.4
57.1
53.0
53.8
54.4
51.0
51.8
52.4
56.0
56.5
56.9
53.4
53.8
54.2
51.4
51.9
52.2
56.0
56.6
57.0
53.4
53.9
54.3
51.4
51.9
52.3
GPM WPD
3.6
5.4
7.2
3.6
5.4
7.2
3.6
5.4
7.2
3.1
8.1
10.0
6.3
8.14
10.0
6.3
8.1
10.0
9.0
10.4
11.8
9.0
10.4
11.8
9.0
10.4
11.8
10.9
12.7
14.5
10.9
12.7
14.5
10.9
12.7
14.5
MBh - Million British Thermal Units Per Hour
SC - Sensible Capacity (MBh)
LAT - Leaving Air Temperature (°F) - Do not operate at over 105 °F.
LWT - Leaving Water Temperature (°F)
20
1.9
3.8
6.3
2.9
5.8
9.5
3.8
7.7
12.6
2.7
4.8
6.7
4.6
7.1
10.1
6.1
9.5
13.4
4.0
5.0
6.2
5.9
7.5
9.3
7.8
10.0
12.3
4.0
5.3
6.7
6.0
7.8
9.8
7.9
10.3
13.0
TC
12.9
17.7
22.1
15.6
21.7
27.3
17.4
24.5
31.1
21.3
25.8
30.0
25.9
31.7
37.3
29.2
33.2
42.6
29.5
32.8
35.9
36.2
40.6
44.7
40.9
46.0
50.9
35.4
32.9
44.1
43.4
49.2
54.5
49.0
55.8
62.1
SC
9.4
13.1
16.5
11.0
15.5
19.8
11.8
17.0
21.9
15.7
19.2
22.5
18.5
22.9
27.0
20.2
24.0
29.9
21.8
24.4
26.9
25.9
29.2
32.3
28.3
32.1
35.7
26.2
29.6
32.9
31.1
35.4
39.5
34.0
39.0
43.7
16º F
LDB
LWB GPM
58.5
60.0
61.2
55.0
56.3
57.4
52.9
54.1
55.0
59.5
60.5
61.3
55.9
56.8
57.5
53.7
55.6
55.1
60.0
60.6
61.1
56.3
56.8
57.3
54.1
54.5
54.9
60.0
60.7
61.2
56.3
56.9
57.4
54.1
54.6
55.0
56.8
57.8
58.4
54.4
55.4
56.2
52.7
53.7
54.4
57.4
58.0
58.5
55.1
55.7
56.2
53.4
55.1
54.5
57.8
58.1
58.4
55.4
55.7
56.0
53.7
54.0
54.3
57.8
58.1
58.4
55.4
55.8
56.2
53.7
54.1
54.4
2.3
3.4
4.5
2.3
3.4
4.5
2.3
3.4
4.5
4.0
5.1
6.2
4.0
5.1
6.2
4.0
4.1
6.2
5.7
6.5
7.4
5.7
6.5
7.4
5.7
6.5
7.4
6.8
7.9
9.1
6.8
7.9
9.1
6.8
7.9
9.1
WPD - Water Pressure Drop
GPM - Gallons per Minute
WPD
TC
SC
0.8
1.7
2.8
1.3
2.5
4.2
1.7
1.9
5.6
1.4
2.1
2.7
2.0
3.2
4.5
2.7
2.8
5.9
1.7
2.2
2.8
2.6
3.3
4.1
3.5
4.4
5.4
1.8
2.3
2.9
2.6
3.4
4.3
3.5
4.6
5.7
11.9
16.3
20.3
14.3
20.1
25.3
16.0
22.6
28.7
19.6
23.8
27.9
23.9
29.3
34.4
27.0
33.2
39.3
27.2
30.2
33.3
33.5
37.4
41.1
37.6
42.3
46.8
32.7
36.8
40.5
40.1
45.3
50.6
45.2
51.5
57.4
9.0
12.6
15.8
10.4
14.8
19.0
11.3
16.2
20.9
15.1
18.4
21.6
17.6
21.9
25.9
19.2
24.0
28.7
20.9
23.5
25.9
24.7
27.9
30.9
27.0
30.6
34.1
25.1
28.4
31.6
29.7
33.9
37.9
32.4
37.1
41.8
20º F
LDB LWB
GPM WPD
59.4
60.9
61.9
56.1
57.4
58.3
54.3
55.3
56.1
60.3
61.3
62.0
57.0
57.7
58.4
54.9
55.6
56.2
60.9
61.4
61.8
57.4
57.8
58.3
55.3
55.7
56.0
60.9
61.4
61.9
57.4
57.9
58.3
55.3
55.7
56.1
1.8
2.7
3.6
1.8
2.7
3.6
1.8
2.7
3.6
3.2
4.1
5.0
3.2
4.1
5.0
3.2
4.1
5.0
4.5
5.2
5.9
4.5
5.2
5.9
4.5
5.2
5.9
5.4
6.3
7.2
5.4
6.3
7.2
5.4
6.3
7.2
57.7
58.5
59.2
55.5
56.4
57.0
54.0
54.9
55.5
58.3
58.8
59.2
56.1
56.7
57.1
54.5
55.1
55.6
58.5
58.8
59.1
56.4
56.7
57.0
54.9
55.2
55.5
58.5
58.8
59.2
56.4
56.7
57.0
54.9
55.2
55.5
0.6
1.1
1.9
0.9
1.7
2.8
1.1
2.3
3.8
0.9
1.4
2.0
1.4
2.1
3.0
1.8
2.8
4.0
1.2
1.2
1.9
1.8
2.2
2.8
2.3
3.0
3.7
1.2
1.6
2.0
1.8
2.3
2.9
2.4
3.1
3.9
MSCF
COIL Data
Chilled Water
Size Face A
4, 6 or 8 Row
15
20
25
30
45
50
65
85
Dimensional Data
1.6
2.2
2.7
3.2
4.5
5.2
6.7
8.6
38
38
38
38
50
50
50
62
B
C
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
11.0
14.0
16.0
18.5
18.5
21.0
26.0
26.0
4
10
10
10
10
10
10
10
10
J
6
12
12
12
12
12
12
12
12
K
8
14
14
14
14
14
14
14
14
4&6
0.75
0.75
0.88
0.88
0.88
1.38
1.38
1.38
8
1.38
1.38
1.38
1.38
1.38
1.63
1.63
1.63
All dimensions are in inches.
3.88
3
K
.75
C
1
1.5 3.75
2
6.5
J
13.25
A
B
18.5
Performance Data
Cooling Capacities based on 80°F DB, 67°F WB, and 45°F EWT.
Coil Rows
Unit Size
4
45 6
8
4
50 6
8
4
65 6
8
4
85 6
8
CFM
1650
1950
2250
1650
1950
2250
1650
1950
2250
1800
2200
2600
1800
2200
2600
1800
2200
2600
2575
2925
3275
2575
2925
3275
2575
2925
3275
3000
3600
4250
3000
3600
4250
3000
3600
4250
TC
SC
65.1 42.9
73.5 48.6
81.5 54.2
78.6 50.6
89.7 58.1
100.0 65.3
87.1 55.2
100.0 63.8
112.4 72.1
72.6 47.5
83.9 55.4
94.2 62.7
87.0 55.9
101.8 65.9
116.0 75.5
95.9 60.8
113.5 72.3
130.3 83.3
100.9 66.3
110.3 72.9
119.6 79.5
121.6 78.6
134.5 87.1
146.5 95.5
134.8 85.7
150.1 95.7
164.5 105.3
122.3 79.7
140.0 91.7
157.1 103.7
146.2 93.7
169.1 108.9
191.9 124.7
161.0 101.8
187.6 119.2
215.2 137.5
6º F
LDB LWB
GPM
56.2
57.2
58.0
52.0
52.8
53.5
49.4
50.1
50.7
55.9
57.0
58.0
51.6
52.6
53.4
49.1
49.9
50.7
56.5
57.2
57.8
52.1
52.8
53.2
49.6
50.1
50.6
55.7
56.7
57.7
51.4
52.3
53.2
49.0
49.7
50.4
24.9 20.9 59.0 40.2
29.4 27.9 61.5 45.7
33.9 35.9 74.0 51.1
24.9 30.8 70.8 47.3
29.4 41.2 81.4 54.5
33.9 52.8 90.7 61.3
24.9 40.7 79.3 51.8
29.4 54.4 91.0 59.8
33.9 69.7 102.2 67.7
27.1 19.0 65.5 44.5
33.1 27.0 75.7 52.1
39.2 36.1 85.5 59.1
27.1 27.8 78.5 52.2
33.1 39.5 92.5 62.0
39.2 52.8 105.2 71.0
27.1 36.7 87.5 56.9
33.1 52.0 103.3 67.9
39.2 69.4 118.5 78.3
38.8 24.1 90.9 62.2
44.1 30.2 99.8 68.6
49.3 36.8 108.7 74.7
38.8 34.7 109.7 73.4
44.1 43.4 122.1 81.8
49.3 52.9 133.0 89.8
38.8 45.3 122.7 80.4
44.1 56.6 136.5 89.7
49.3 68.9 149.7 98.9
45.2 36.1 111.3 75.1
54.2 49.8 127.1 86.4
64.0 66.6 143.7 98.1
45.2 52.2 133.8 88.2
54.2 71.8 154.4 102.6
64.0 95.9 175.6 117.5
45.2 68.3 147.4 95.6
54.2 93.8 171.5 112.1
64.0 125.2 196.6 129.4
54.2
54.9
55.4
51.1
51.8
52.3
49.1
49.7
50.2
53.9
54.7
55.4
50.8
51.6
52.3
48.9
49.6
50.1
54.3
54.9
55.3
51.3
51.8
52.2
49.2
49.7
50.1
53.7
54.4
55.1
50.7
51.4
52.1
48.7
49.3
49.9
WPD
TC
SC
10º F
LDB
LWB
GPM
WPD
57.7
58.6
59.2
53.8
54.4
55.1
51.3
51.9
52.5
57.4
58.4
59.2
53.5
54.3
55.0
51.1
51.8
52.5
57.9
58.6
59.1
53.9
54.4
54.9
51.4
51.9
52.4
57.1
58.0
58.9
53.1
53.9
54.7
50.9
51.5
52.2
55.6
56.2
56.6
52.9
53.4
53.9
50.9
51.5
52.0
55.4
56.0
56.6
52.7
53.3
53.8
50.7
51.4
51.9
55.7
56.2
56.5
53.0
53.4
53.8
51.1
51.5
51.9
55.1
55.7
56.3
52.3
52.9
53.5
50.5
51.1
51.6
14.9
17.6
20.4
14.9
17.6
20.4
14.9
17.6
20.4
16.3
19.9
23.5
16.3
19.9
23.5
16.3
19.9
23.5
23.3
26.5
29.6
23.3
26.5
29.6
23.3
26.5
29.6
27.1
32.6
38.4
27.1
32.6
38.4
27.1
32.6
38.4
8.6
11.4
14.7
12.7
16.9
21.7
16.7
22.4
28.6
7.8
11.0
14.8
11.4
16.2
21.6
15.1
21.3
28.5
9.8
12.3
14.9
14.2
17.7
21.6
18.6
23.2
28.2
14.7
20.3
27.1
21.3
29.3
39.2
28.0
38.4
51.2
MBh - Million British Thermal Units Per Hour
SC - Sensible Capacity (MBh)
LAT - Leaving Air Temperature (°F) - Do not operate at over 105 °F.
LWT - Leaving Water Temperature (°F)
TC
SC
16º F
LDB
51.2 37.0
58.1 42.3
64.6 47.2
62.1 43.7
71.1 50.3
79.4 56.6
69.6 47.7
80.0 55.2
90.0 62.4
56.4 40.9
65.9 48.0
75.0 54.8
68.6 48.1
80.6 57.0
91.7 65.6
76.7 52.4
90.5 62.5
104.0 72.3
79.1 57.2
87.1 63.4
94.5 69.2
96.2 67.6
106.7 75.4
116.5 83.0
107.8 74.0
120.0 82.8
131.5 91.4
96.8 69.1
111.2 79.9
125.9 90.9
116.5 81.0
135.1 94.5
153.8108.6
129.9 88.1
151.3103.4
173.7119.5
59.5
60.2
60.8
55.8
56.4
57.0
53.6
54.1
54.6
59.2
60.1
60.7
55.6
56.3
56.9
53.4
54.0
54.6
59.7
60.2
60.7
56.0
56.4
56.8
53.7
54.1
54.5
59.0
59.7
60.4
55.3
56.0
56.6
53.1
53.7
54.3
LWB
57.2
57.7
58.0
54.9
55.3
55.7
53.2
53.6
54.0
57.1
57.6
58.0
54.7
55.2
55.7
53.0
53.6
54.0
57.2
57.7
58.0
55.0
55.3
55.6
53.3
53.6
54.0
56.8
57.3
57.7
54.4
54.9
55.4
52.8
53.3
53.7
GPM WPD
9.3
11.0
12.7
9.3
11.0
12.7
9.3
11.0
12.7
10.2
12.5
14.7
10.2
12.5
14.2
10.2
12.5
14.7
14.6
60.6
18.5
14.6
16.6
18.5
14.6
16.6
18.5
17.0
20.4
24.0
17.0
20.4
24.0
17.0
20.4
24.0
3.8
5.0
6.5
5.6
7.5
9.6
7.4
9.9
12.6
3.4
4.8
6.5
5.0
7.1
9.5
6.6
9.4
12.5
4.3
5.4
6.5
6.2
7.8
9.5
8.2
10.2
12.4
6.4
8.9
11.9
9.4
12.9
17.2
12.3
16.9
22.5
TC
SC
20º F
LDB
47.3 35.5
53.8 40.6
59.9 45.5
57.2 41.7
65.5 48.1
73.6 54.2
64.1 45.5
74.0 52.7
83.4 59.8
52.5 39.3
61.0 46.1
69.2 52.6
63.2 45.9
74.3 54.6
85.4 62.9
70.9 50.0
83.8 59.7
96.3 69.1
73.0 55.0
80.6 61.0
87.7 66.7
88.9 64.8
98.3 72.2
107.6 79.5
99.6 70.7
111.0 79.1
121.4 87.4
89.3 66.2
103.2 76.7
117.2 87.5
107.6 77.5
124.8 90.7
142.8104.1
120.0 84.1
139.8 98.9
160.6114.2
60.4
60.9
61.5
56.9
57.4
58.0
54.8
55.3
55.7
60.1
60.8
61.5
56.7
57.3
57.9
54.6
55.2
55.7
60.5
60.9
61.4
57.0
57.4
57.8
54.9
55.3
55.6
59.8
60.5
61.2
56.4
57.0
57.6
54.4
54.9
55.4
LWB
GPM WPD
58.0
58.4
58.7
55.9
56.3
56.6
54.4
54.8
55.1
57.9
58.4
58.7
55.8
56.3
56.6
54.2
54.7
55.1
58.1
58.4
58.7
56.0
56.3
56.6
54.5
54.8
55.1
57.7
58.0
58.4
55.5
55.9
56.3
54.0
54.4
54.8
7.5 2.6
8.8 3.4
10.2 4.4
7.5 3.8
8.8 5.1
10.2 6.5
7.5 5.0
8.8 6.7
10.2 8.6
8.2 2.3
10.0 3.3
11.8 4.4
8.2 3.4
10.0 4.8
11.8 6.5
8.2 4.5
10.0 6.4
11.8 8.5
11.7 2.9
13.2 3.6
14.8 4.4
11.7 4.2
13.2 5.3
14.8 6.4
11.7 5.5
13.2 6.9
14.8 8.4
13.6 4.4
16.3 6.0
19.2 8.0
13.6 6.3
16.3 8.7
19.2 11.6
13.6 8.3
16.3 11.4
19.2 15.2
WPD - Water Pressure Drop
GPM - Gallons per Minute
21
MSCF COIL Data
Unit Face
Size Area
15
1.6
20
2.2
25
2.7
30
3.2
45
4.5
50
5.2
65
6.7
85
8.6
Direct Expansion (DX)
4, 6 or 8 Row
Dimensional Data
A
B
C
38
38
38
38
50
50
50
62
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
11.0
14.0
16.0
18.5
18.5
21.0
26.0
26.0
L
6
10.75
10.75
10.75
10.75
10.75
10.75
10.75
10.75
4
8.75
8.75
8.75
8.75
8.75
8.75
8.75
8.75
M
N
8
All
All
12.75 5.25 0.63
12.75 7.00 0.63
12.75 8.00 0.88
12.75 9.00 0.88
12.75 9.00 0.88
12.75 10.25 0.88
12.75 13.00 1.13
12.75 13.00 1.13
P
4&6
0.63
0.63
1.38
1.38
1.38
1.38
1.38
1.38
8
1.38
1.38
1.38
1.38
1.38
1.63
1.63
1.63
All dimensions are in inches.
3.88
3
N
2*
C
2
1.5 3.75
1
6.5
L
13.25
A
18.5
B
Performance Data
* Indicates diameter of hole in panel
Cooling Capacities based on Refrigerant R-22.
Coil Rows
Unit Size
4
15 6
8
4
20 6
8
4
25 6
8
4
30 6
8
CFM
TC
400
600
800
400
600
800
400
600
800
700
900
1100
700
900
1100
700
900
1100
1000
1150
1300
1000
1150
1300
1000
1150
1300
1200
1400
1600
1200
1400
1600
1200
1400
1600
18.1
23.6
27.9
23.1
31.3
38.0
25.4
35.1
43.2
31.7
36.6
40.4
37.8
45.3
51.7
42.0
51.1
58.8
39.3
42.7
45.9
52.1
57.4
62.3
58.5
64.9
70.8
51.4
55.9
59.6
62.5
69.6
76.1
70.2
78.7
86.4
40º F Suction Temp.
SC
LDB LWB RPD
11.7
15.7
19.2
14.2
19.6
24.4
15.4
21.6
27.0
20.2
23.9
27.1
23.6
28.7
33.2
25.7
31.6
36.9
26.2
28.9
31.5
32.7
36.4
39.9
36.0
40.2
44.2
33.2
36.7
39.9
39.3
44.2
48.8
43.2
48.8
54.1
52.9
55.7
57.8
47.1
49.7
51.8
44.3
46.7
48.7
53.2
55.4
57.2
48.8
50.5
52.0
46.0
47.5
49.0
55.7
56.7
57.6
49.7
50.7
51.6
46.7
47.6
48.5
54.4
55.7
56.9
49.7
50.8
51.8
46.7
47.7
48.7
52.2
54.4
56.0
47.1
49.5
51.3
44.3
46.7
48.7
55.2
53.9
55.4
48.7
50.2
51.5
46.0
47.5
48.9
54.4
55.2
55.9
49.5
50.3
51.1
46.7
47.6
48.5
53.1
54.2
55.2
49.5
50.4
51.3
46.7
47.7
48.7
0.4
0.6
0.8
0.9
1.6
2.4
1.4
2.7
4.1
5.0
6.6
8.1
1.3
1.9
2.5
2.2
3.2
4.3
0.6
0.7
0.8
1.6
2.0
2.3
2.7
3.4
4.0
5.8
6.9
7.9
1.6
2.0
2.4
2.7
3.4
4.1
TC
13.9
17.9
21.1
18.6
25.0
30.3
21.0
28.9
35.6
25.8
30.1
33.5
30.4
36.2
41.3
34.8
42.0
48.5
49.8
32.3
34.6
41.7
45.9
49.8
48.2
53.4
58.3
42.1
46.1
49.4
50.1
53.6
60.6
57.9
64.8
71.2
45º F Suction Temp.
SC
LDB LWB
RPD
TC
10.0
13.5
16.6
12.2
17.0
21.2
13.3
18.8
23.8
17.8
21.4
24.5
20.4
24.8
28.9
22.5
27.6
32.4
22.6
25.0
27.3
28.3
31.6
34.6
31.4
35.2
38.8
29.5
32.9
36.0
34.0
38.3
42.4
37.7
42.7
47.5
0.2
0.3
0.4
0.5
0.9
1.4
0.9
1.7
2.5
3.0
4.0
5.0
0.8
1.1
1.4
1.4
2.0
6.6
0.3
0.4
0.4
0.9
1.1
1.3
1.7
2.0
2.4
3.5
4.2
4.8
0.9
1.1
1.4
1.7
2.1
2.5
9.9
12.8
15.2
13.7
18.5
22.3
16.1
22.1
27.2
19.6
22.8
25.4
24.2
28.1
31.3
26.7
32.2
36.8
21.3
23.2
24.9
30.8
35.7
36.6
36.9
40.9
44.5
31.9
34.8
37.4
39.4
42.8
46.3
44.3
49.5
54.4
56.8
59.1
60.8
51.7
53.8
55.5
49.1
50.9
52.5
56.4
58.0
59.4
53.1
54.5
55.6
50.3
51.6
52.7
59.1
59.9
60.6
53.8
54.6
55.3
50.9
51.7
52.4
57.3
58.3
59.2
53.8
54.7
55.5
50.9
51.8
52.5
MBh - Million British Thermal Units Per Hour
SC - Sensible Capacity (MBh)
LDB - Leaving Dry Bulb (°F) - Do not operate at over 105 °F.
22
P
56.1
57.8
59.0
51.7
53.5
55.0
49.1
50.9
52.5
55.3
56.6
57.6
52.9
54.1
55.1
50.3
51.6
52.6
57.8
58.4
58.9
53.2
54.2
54.8
50.9
51.7
52.3
56.0
56.7
57.4
53.5
54.3
55.0
50.9
51.8
52.5
50º F Suction Temp.
SC
LDB LWB
RPD
8.5
11.7
14.5
10.2
14.4
18.1
11.3
16.0
20.4
15.5
18.6
21.5
17.9
21.7
25.1
19.1
23.6
27.7
19.5
21.7
23.8
24.0
28.7
29.6
26.7
30.1
33.3
25.6
28.7
31.6
29.7
33.3
36.8
32.1
36.5
40.7
0.1
0.1
0.2
0.3
0.5
0.7
0.5
0.9
1.3
1.5
2.1
2.6
3.5
4.8
5.9
0.7
1.0
1.4
0.1
0.2
0.2
0.5
0.6
0.6
0.9
1.1
1.3
1.8
2.2
2.5
4.2
4.9
5.8
0.9
1.1
1.3
60.3
62.0
63.2
56.3
57.8
59.0
53.9
55.3
56.4
59.5
60.8
61.9
56.4
57.7
58.9
54.8
55.7
56.7
62.0
62.6
63.1
57.8
58.7
58.9
55.3
55.8
56.3
60.2
61.0
61.7
57.1
58.0
58.7
55.3
55.9
56.4
59.5
60.6
61.4
56.3
57.5
58.4
53.9
55.3
56.3
58.4
59.3
60.1
56.1
57.3
58.3
54.8
55.7
56.5
60.6
61.0
61.3
57.5
58.3
58.4
55.3
55.8
56.2
58.9
59.5
60.0
56.8
57.5
58.1
55.3
55.8
56.3
LWB - Leaving Wet Bulb (°F)
RPD - Refrigerant Pressure Drop (R-22)
M
MSCF COIL Data
Unit Face
Size Area
15
1.6
20
2.2
25
2.7
30
3.2
45
4.5
50
5.2
65
6.7
85
8.6
Direct Expansion (DX)
4, 6 or 8 Row
Dimensional Data
A
B
C
38
38
38
38
50
50
50
62
24.5
24.5
24.5
24.5
24.5
24.5
24.5
24.5
11.0
14.0
16.0
18.5
18.5
21.0
26.0
26.0
L
6
10.75
10.75
10.75
10.75
10.75
10.75
10.75
10.75
4
8.75
8.75
8.75
8.75
8.75
8.75
8.75
8.75
M
N
8
All
All
12.75 5.25 0.63
12.75 7.00 0.63
12.75 8.00 0.88
12.75 9.00 0.88
12.75 9.00 0.88
12.75 10.25 0.88
12.75 13.00 1.13
12.75 13.00 1.13
P
4&6
0.63
0.63
1.38
1.38
1.38
1.38
1.38
1.38
8
1.38
1.38
1.38
1.38
1.38
1.63
1.63
1.63
All dimensions are in inches.
3.88
3
N
2*
C
P
2
1.5 3.75
1
M
6.5
L
13.25
A
18.5
B
Performance Data
* Indicates diameter of hole in panel
Cooling Capacities based on Refrigerant R-22.
Coil Rows
Unit Size
45
50
65
85
CFM
1650
4 1950
2250
1650
6 1950
2250
1650
8 1950
2250
1800
4 2200
2600
1800
6 2200
2600
1800
8 2200
2600
2575
4 2925
3275
2575
6 2925
3275
2575
8 2925
3275
3000
4 3600
4250
3000
6 3600
4250
3000
8 3600
4250
TC
70.6
78.4
84.9
87.2
97.2
106.4
94.6
107.6
119.6
79.0
89.3
98.6
97.2
111.1
123.4
104.7
122.3
138.5
108.1
117.7
125.3
134.3
145.9
156.4
146.3
161.3
175.5
134.1
149.5
163.5
156.8
178.6
199.9
178.5
205.7
232.3
40º F Suction Temp.
SC
LDB LWB
RPD
TC
45.7
51.4
56.5
54.5
61.6
68.2
58.5
67.1
75.2
50.8
58.4
65.5
60.5
70.2
79.1
64.6
76.2
87.1
70.3
77.1
83.1
84.3
92.4
100.1
90.7
100.6
110.1
85.7
97.0
108.1
98.5
113.5
128.6
109.5
127.1
144.9
1.7
2.1
2.5
4.0
4.9
5.9
0.8
1.0
1.2
1.6
2.0
2.5
3.6
4.7
5.8
0.7
1.0
1.2
1.8
2.1
2.4
4.2
4.9
5.7
0.8
1.0
1.2
3.3
4.2
5.0
0.9
1.1
1.4
1.5
2.0
2.5
55.9
61.4
66.7
71.9
80.4
87.9
79.1
88.8
97.2
62.3
70.3
77.4
80.1
91.7
101.9
88.0
101.3
112.7
85.4
92.1
98.2
110.8
120.5
129.4
122.0
133.2
143.1
108.5
121.0
132.7
131.6
147.6
162.2
145.8
167.5
189.1
54.4
55.6
56.8
49.4
50.8
51.9
47.2
48.2
49.1
53.9
55.4
56.7
48.9
50.5
51.8
46.8
48.0
49.0
54.7
55.6
56.5
49.7
50.8
51.7
47.4
48.2
48.9
53.6
55.1
56.5
49.6
50.8
52.0
46.2
47.3
48.4
53.1
54.1
55.0
49.2
50.4
51.4
47.2
48.2
49.0
52.7
53.9
54.9
48.7
50.1
51.3
46.8
48.0
49.0
53.4
54.1
54.8
49.4
50.4
51.2
47.4
48.2
48.9
52.4
53.6
54.7
49.4
50.5
51.5
46.2
47.3
48.4
45º F Suction Temp.
SC
LDB LWB RPD
39.8
44.7
49.5
48.0
54.5
60.6
51.6
58.8
65.5
44.1
51.0
57.3
53.1
62.0
70.2
57.1
66.9
75.9
61.2
67.1
72.6
74.2
81.7
88.9
79.9
88.2
96.1
75.3
85.7
96.1
87.7
100.4
113.1
94.7
110.2
126.1
57.7
58.8
59.7
53.1
54.1
55.1
51.1
52.1
53.0
57.3
58.6
59.6
52.7
53.9
55.0
50.7
51.8
53.0
58.0
58.8
59.5
53.3
54.1
54.9
51.3
52.1
52.8
56.8
58.0
59.1
52.9
54.2
55.4
50.8
51.7
52.5
MBh - Million British Thermal Units Per Hour
SC - Sensible Capacity (MBh)
LDB - Leaving Dry Bulb (°F) - Do not operate at over 105 °F.
56.4
57.2
57.9
52.8
53.7
54.5
51.1
52.1
53.0
56.1
57.1
57.8
52.5
53.5
54.5
50.7
51.8
52.9
56.6
57.2
57.7
53.0
53.7
54.4
51.3
52.1
52.8
55.6
56.5
57.3
52.7
53.8
54.8
50.8
51.7
52.5
7.8
1.2
1.4
2.4
3.0
3.6
3.9
4.9
5.9
0.9
1.1
1.4
2.2
2.9
3.6
3.6
4.7
5.9
1.0
1.2
1.3
2.6
3.0
3.5
4.2
4.9
5.7
2.0
2.4
2.9
4.4
5.5
6.6
0.9
1.2
1.5
TC
50º F Suction Temp.
SC
LDB LWB RPD
44.7 35.6 60.0
48.4 39.9 61.1
51.7 44.0 61.9
54.2 40.9 57.1
61.5 47.1 57.6
67.0 52.5 58.4
62.5 47.7 54.9
70.2 51.3 55.7
77.1 57.5 56.4
45.0 37.7 60.6
50.8 43.8 61.6
56.0 49.6 62.4
61.0 45.5 56.6
70.1 53.4 57.5
77.7 60.8 58.4
69.4 49.3 54.6
80.0 58.2 55.5
89.4 66.6 56.3
61.8 52.5 61.1
66.6 57.7 61.7
71.1 62.7 62.3
83.9 63.5 57.2
92.3 70.6 57.6
98.6 77.0 58.2
96.4 69.3 55.1
105.2 76.9 55.7
113.4 84.2 56.2
80.4 64.6 60.1
89.6 74.0 61.0
98.4 83.5 61.8
103.2 76.3 56.5
116.0 87.9 57.4
127.9 99.8 58.3
112.8 81.0 55.0
126.8 93.6 55.9
142.3 107.3 56.6
58.7
59.5
60.1
56.8
57.2
57.8
54.9
55.6
56.2
59.4
60.0
60.6
56.4
57.1
57.8
54.6
55.5
56.2
59.8
60.2
60.5
56.8
57.2
57.7
55.1
55.6
56.1
58.8
59.5
60.0
56.2
57.0
57.7
55.0
55.9
56.5
4.5
5.3
6.0
1.2
1.6
1.9
2.2
2.8
3.3
0.4
0.5
0.6
1.2
1.5
1.9
2.0
2.7
3.3
0.5
0.6
0.6
1.3
1.6
1.8
2.3
2.8
3.2
1.0
1.2
1.5
2.4
3.0
3.7
3.9
4.9
0.8
LWB - Leaving Wet Bulb (°F)
RPD - Refrigerant Pressure Drop (R-22)
23
MSCF FILTER Data
In recent years building owner and contractors are have been challenged with designing HVAC systems which
provide better indoor air quality (IAQ). A new standard known as ASHRAE 52.2 (Method of Testing General
Ventilation Air Cleaning Devices for Removal Efficiency by Particle Size) is offering a significant step forward in
filter and IAQ testing. This new standard complements the old standard, it does not replace them, and has
established a new controlled method of laboratory testing, which provides us with at Minimum Efficiency
Reporting Value (MERV). It is to this standard to which Greenheck filters are tested.
Aluminum filter - Seven layer aluminum mesh 2 inch
Pleated filter - MERV-8 (30%) - controls mold spores 2 and 4 inch
Box filter - MERV-11 (60%) - controls lead dust, milled flour 2 and 4 inch
Filter Module Dimensional
Size
A
15
20
25
30
45
50
65
85
38
38
38
38
50
50
50
62
Vert.
12.75
12.75
12.75
12.75
12.75
12.75
12.75
12.75
B
Sloped
24.5
24.5
27.0
31.0
32.0
32.0
38.0
38.0
C
11.0
14.0
16.0
18.5
18.5
21.0
26.0
26.0
Weight
Vert. Sloped
33
54
38
64
45
75
52
86
60
99
68
114
79
131
91
151
C
All dimensions are in inches.
A
B
Filters Dimensional
Size Vertical Qty Face Sloped Qty Face
12x12
1
15
9x18
2
1.8
2.5
12x24
1
12x12
1
16x16
1
20
2.5
3.4
12x24
1
16x20
1
25
14x18
2
3.0
16x20
2
3.8
16x16
1
12x24
1
30
3.4
5.3
16x20
1
24x24
1
45
16x24
2
4.8
24x24
2
7.2
50
18x24
2
5.4
24x24
2
7.2
65
24x24
2
7.2
24x24
4
14.4
12x24
1
12x24
2
85
8.9
17.8
24x24
2
24x24
4
All dimensions are in inches.
24
C
A
B
MSCF FILTER Data
Size
15
20
25
30
45
50
65
85
CFM
300
400
500
600
700
800
600
700
800
900
1000
1100
900
990
1080
1170
1260
1350
1200
1280
1360
1440
1520
1600
1500
1650
1800
1950
2100
2250
1800
1960
2120
2280
2440
2600
2400
2590
2780
2970
3160
3350
3000
3260
3520
3780
4040
4300
Filter
Velocity
167
222
278
333
389
444
240
280
320
360
400
440
300
330
360
390
420
450
353
376
400
424
447
471
313
344
375
406
438
469
333
363
393
422
452
481
333
360
386
413
439
465
337
366
396
425
454
483
Alum.
2 in.
0.056
0.100
0.157
0.226
0.307
0.401
0.117
0.159
0.208
0.263
0.325
0.393
0.183
0.221
0.263
0.309
0.358
0.411
0.253
0.288
0.325
0.364
0.406
0.450
0.198
0.240
0.285
0.335
0.389
0.446
0.226
0.267
0.313
0.362
0.414
0.471
0.193
0.225
0.259
0.296
0.335
0.377
0.198
0.233
0.272
0.314
0.359
0.406
Vertical Filters
Pleated
30%
65%
2 in.
4 in.
2 in.
4 in.
0.068
0.065
0.088
0.085
0.121
0.116
0.157
0.151
0.188
0.182
0.245
0.236
0.271
0.262
0.353
0.340
0.369
0.356
0.480
0.463
0.482
0.465
0.627
0.604
0.141
0.136
0.183
0.176
0.191
0.185
0.249
0.240
0.250
0.241
0.325
0.313
0.316
0.305
0.411
0.397
0.391
0.377
0.508
0.490
0.473
0.456
0.614
0.592
0.220
0.212
0.286
0.275
0.266
0.256
0.346
0.333
0.316
0.305
0.411
0.397
0.371
0.358
0.483
0.465
0.431
0.415
0.560
0.540
0.494
0.477
0.643
0.620
0.304
0.293
0.395
0.381
0.346
0.334
0.450
0.434
0.391
0.377
0.508
0.490
0.438
0.422
0.569
0.549
0.488
0.470
0.634
0.612
0.541
0.521
0.703
0.678
0.238
0.230
0.310
0.299
0.288
0.278
0.375
0.362
0.343
0.331
0.446
0.430
0.403
0.388
0.524
0.505
0.467
0.451
0.607
0.586
0.536
0.517
0.697
0.672
0.271
0.262
0.353
0.340
0.322
0.310
0.418
0.403
0.376
0.363
0.489
0.472
0.435
0.420
0.566
0.545
0.498
0.481
0.648
0.625
0.566
0.546
0.736
0.709
0.310
0.299
0.403
0.389
0.361
0.348
0.469
0.453
0.416
0.401
0.541
0.521
0.475
0.458
0.617
0.595
0.537
0.518
0.699
0.674
0.604
0.582
0.785
0.757
0.317
0.306
0.412
0.397
0.374
0.361
0.487
0.469
0.436
0.421
0.567
0.547
0.503
0.485
0.654
0.631
0.575
0.554
0.747
0.721
0.651
0.628
0.847
0.816
Sloped Filters
Filter
Velocity
120
160
200
240
280
320
176
206
235
265
294
324
237
261
284
308
332
355
226
242
257
272
287
302
208
229
250
271
292
313
250
272
294
317
339
361
167
180
193
206
219
233
169
183
198
212
227
242
Alum.
2 in.
0.033
0.059
0.093
0.134
0.182
0.238
0.072
0.098
0.128
0.163
0.201
0.243
0.130
0.157
0.187
0.220
0.255
0.293
0.119
0.135
0.153
0.171
0.191
0.211
0.101
0.122
0.145
0.170
0.197
0.227
0.145
0.172
0.201
0.233
0.266
0.303
0.064
0.075
0.086
0.099
0.112
0.126
0.066
0.078
0.091
0.105
0.120
0.135
Pleated
30%
2 in.
0.040
0.071
0.112
0.161
0.219
0.286
0.087
0.118
0.154
0.195
0.241
0.292
0.157
0.189
0.225
0.264
0.307
0.352
0.143
0.163
0.184
0.206
0.229
0.254
0.121
0.147
0.174
0.205
0.237
0.272
0.174
0.207
0.242
0.280
0.320
0.364
0.078
0.090
0.104
0.119
0.134
0.151
0.079
0.094
0.109
0.126
0.144
0.163
4 in.
0.039
0.069
0.108
0.155
0.211
0.275
0.084
0.114
0.149
0.188
0.233
0.282
0.151
0.183
0.217
0.255
0.296
0.340
0.138
0.157
0.177
0.199
0.221
0.245
0.117
0.141
0.168
0.197
0.229
0.263
0.168
0.199
0.233
0.270
0.309
0.351
0.075
0.087
0.100
0.114
0.130
0.146
0.076
0.090
0.105
0.121
0.139
0.157
65%
2 in.
4 in.
0.052
0.050
0.093
0.090
0.145
0.140
0.209
0.201
0.284
0.274
0.371
0.358
0.113
0.109
0.154
0.148
0.201
0.194
0.254
0.245
0.314
0.303
0.380
0.366
0.203
0.196
0.246
0.237
0.293
0.282
0.344
0.332
0.399
0.384
0.458
0.441
0.186
0.179
0.212
0.204
0.239
0.230
0.268
0.258
0.298
0.288
0.331
0.319
0.157
0.152
0.190
0.184
0.227
0.219
0.266
0.257
0.309
0.297
0.354
0.342
0.227
0.219
0.269
0.259
0.314
0.303
0.364
0.351
0.417
0.402
0.473
0.456
0.101
0.097
0.117
0.113
0.135
0.130
0.154
0.149
0.175
0.168
0.196
0.189
0.103
0.099
0.122
0.117
0.142
0.137
0.164
0.158
0.187
0.180
0.212
0.204
Max Velocity Limits
2 in. Aluminum - 650 fpm
2 in. Pleated - 500 fpm
4 in. Pleated - 625 fpm
25
MSCF MIXING BOX Data
The 20 is a general purpose damper intended for applications in low to medium pressure and velocity systems
under circumstances where low leakage performance is not necessary. This dampers has 3-V style blades for
applications as an automatic control or manual balancing damper.
Blades: 16 gauge galvanized steel, reinforced with 3 longitudinal structurally
designed vee's.
Linkage: Side linkage out of airstream (concealed in frame)
3-V Blade
Seals: None
The low leakage control damper intended for applications in low to medium pressure and velocity systems. This
damper has 3-V style blades for applications as an automatic control or manual balancing damper.
Blades: 16 gauge galvanized steel, reinforced with 3 longitudinal structurally designed vee's.
Linkage: Side linkage out of airstream (concealed in frame)
Seals: Extruded vinyl blade seals flexible metal compression type jamb seals
The Airfoil is designed to meet the highest standards established for commercial
control dampers. It is an extremely low leakage damper intended for application in
medium to high pressure and velocity systems. May be used for applications as an
automatic control or balancing damper.
Blades: 16 gauge galvanized steel, reinforced with 3 longitudinal structurally designed
vee's.
Linkage: Side linkage out of airstream (concealed in frame)
Seals: Extruded silicone rubber blade seals. Flexible metal compression type jamb seals
Airfoil Blade
Mixing Box Dimensional
Size
A
15
20
25
30
45
50
65
85
38
38
38
38
50
50
50
62
Vert.
12.75
12.75
12.75
12.75
12.75
12.75
12.75
12.75
B
Sloped
24.5
24.5
27.0
31.0
32.0
32.0
38.0
38.0
C
D
E
11.0
14.0
16.0
18.5
18.5
21.0
26.0
26.0
6.0
9.0
11.0
13.5
13.5
16.0
21.0
21.0
33
33
33
33
45
45
45
57
Weight
Vert. Sloped
33
54
38
64
45
75
52
86
60
99
68
114
79
131
91
151
All dimensions are in inches.
1
A
35/8
21/2
C
D
E
21/2
26
B
MSCF MIXING BOX Data
Velocity Limitations
74
Damper Pressure Drop
60
Damper Height (in.)
15.0
48
12
24
36
48
Damper Width (in.)
Pressure Limitations
5.0 in. wg
5
4.0 in. wg
Pressure (in. wg)
4
3
3.0
2.0
1.0
.9
.8
.7
.6
20
0
4.0
.5
.4
D-
0
5.0
VC
12
6.0
3
24
10.0
9.0
8.0
7.0
D2
Static Pressure Difference (in. wg)
36
2000
fpm
VC
2500
fpm
3000
fpm
.3
2.5 in. wg
.2
2
1
1
2
3
4 5 6 7 8 9 10
20
30
4050 60 708090100
150
Air Leakage (cfm/ft2)
0
0
12
24
36
48
Damper Width (in.)
Velocity Limitations
74
Damper Pressure Drop
8.5
8.0
7.0
48
3500
fpm
4000
fpm
36
3000
fpm
2500
fpm
6.0
5.0
24
4.0
Static Pressure Difference (in. wg)
Damper Height (in.)
60
12
0
0
12
24
36
60
48
Damper Width (in.)
Pressure Limitations
8.0 in. wg
8
6.3 in. wg
Pressure (in. wg)
6
4.7 in. wg
4
3.0
2.0
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
3.0 in. wg
0.2
2
0
0
12
24
36
Damper Width (in.)
48
60
1
2
3
4
5
6 7 8 9 10
20
30
40
50 60 70 80 90 100
150
Air Leakage (cfm/ft2)
27
Fan Coils and Indoor Air Handlers
MSCF (Modular Small Cabinet Fan) is designed for schools, medical facilities,
office buildings, and many other commercial applications. Modules include:
mixing boxes (with or with out filters and dampers), plenums (12 or 24 in.), and
coils (hot water, chilled water, and direct expansion), filters (2 in. 30% or 4 in.
60% efficiencies). Ultra low profile ranging from 11 to 26 inches. Capacities
range from 250 to 5,000 cfm and up to 4 in. wg.
LFC (Low Profile Fan Coil) is a low profile blower coil unit designed as a low
cost method of air conditioning/heating buildings or specific spaces. The LFC
includes: heating coils (1, 2, or 4 row) and/or cooling coils (4, 6, or 8 row), and
an optional (Inlet) vertical pre-filter (2 in. 30% or 4 in. 60% efficiencies).
Capacities range from 250 to 5,000 cfm and up to 4 in. wg.
UFT (Underfloor Fan Terminal) is designed for raised floor applications and
comes in two standard heights of 10 and 13 inches. The are both available
with a single or double power pack. Hot water, electric, or no coiled units are
available with a control center as standard. Capacities range from 130 to 1,798
cfm and up to .875 in. wg.
Warranty
Greenheck warrants this equipment to be free from defects in material and workmanship for a period of one year from the
purchase date. Any units or parts which prove defective during the warranty period will be replaced at our option when returned to
our factory, transportation prepaid.
Motors are warranted by the motor manufacturer for a period of one year. Should motors furnished by Greenheck prove defective
during this period, they should be returned to the nearest authorized motor service station. Greenheck will not be responsible for
any removal or installation costs.
Due to continuing research, Greenheck reserves the right to change specifications without notice.
®
Number one in air movement and control.
Centrifugal and Vane Axial Fans
Fans and Ventilators
Energy Recovery Ventilators &
Make-Up Air Units
Kitchen Ventilation Systems
Dampers and Louvers
Visit the Greenheck website for the most current information available
www.greenheck.com
Greenheck • P.O. Box 410 Schofield, WI 54476-0410 • Phone (715) 359-6171 • Fax (715) 355-2399 • www.greenheck.com
Copyright © 2003 Greenheck Fan Corp.
28
MSCF White Paper
Rev 2 December 2003
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement