Task Force Tips model #AP3SX-NX-PS manually operated lightweight aluminum high flow
straight inlet ball intake valve shall be provided. The unit shall be equipped with an adjustable
pressure relief valve under the main valve body. The valve shall be controlled with an NFPA
compliant slow-close crank handle gear operator located on top of the gear box. A 3/4" bleeder
valve shall be provided to exhaust excess air or water from the valve and hoseline. A position
indicator shall be provided to allow for quick visualization of the status of the valve in the open,
closed or partial positions. For maximum corrosion protection the aluminum casting shall be
hardcoat anodized, with a powder coat internal and external finish and all components typically
facing the wet side of the valve shall be constructed from stainless steel.
The connections shall be: 6" Storz swivel and a 6" female NH swivel long handle connection and
include polymer bearing strips for prevention of galvanic corrosion. The Storz coupling shall be
easily configurable from swivel to rigid. The unit shall be covered by a five-year warranty.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF