Task Force Tips Thunder Fog, model # JTS250PS selectable gallonage nozzle with shutoff shall
be provided. The nozzle design shall allow for straight stream through wide fog patterns with
user selectable flows and be able to be flushed without shutting down. For corrosion resistance
and durability the nozzle shall be constructed from hardcoat anodized aluminum alloy, have a
stainless steel ball valve with quick change polymer valve seat, a protective rubber bumper,
stainless steel spinning fog teeth, laser engraved serial number, reflective labeling and five year
warranty. An integral pistol grip handle shall be positioned directly below the valve handle. The
nozzle shall comply with the current NFPA 1964 standard.
The nozzle shall have five (5) selectable flow settings @ 100 PSI:
95 GPM
125 GPM
150 GPM
200 GPM
250 GPM
The nozzle shall have a 2-1/2" female NH swivel rocker lug inlet which allows the nozzle to
swivel when tightened and be designed to accept the Task Force Tips FJ-MX-FT FoamJet multi
expansion foam attachment.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF