Panther-Declaration of conformity

Panther-Declaration of conformity
Déclaration de conformité
Declaración de Conformidad
Dichiarazione di conformità
Mettler-Toledo, Inc.
1150 Dearborn Drive
Worthington, Ohio 43085
declare under our sole responsibility that the product,
erklären, in alleiniger Verantwortung, daß dieses Produkt,
déclarons sous notre seule responsabilité que le produit,
declaramos, bajo nuestra sola responsabilidad, que el producto,
verklaren onder onze verantwoordelijkheid, dat het product,
dichiariamo sotto nostra unica responsabilitá, che il prodotto,
to which this declaration relates is in conformity with the following standard(s) or other normative document(s).
auf das sich diese Erklärung bezieht, mitder/den folgenden Norm(en) oder Richtlinie(n) übereinstimmt.
Auquel se réfère cette déclaration est conforme à la (aux) norme(s) ou au(x) document(s) normatif(s).
Al que se refiere esta declaración es conforme a la(s) norma(s) u otro(s) documento(s) normativo(s).
Waarnaar deze verklaring verwijst, aan de volende norm(en) of richtlijn(en) beantwoordt.
A cui si riferisce questa dichiarazione è conforme alla/e sequente/i norma/e o documento/i normativo/i.
in combination with a weighing platform produced by Mettler-Toledo is in conformity with the following directives and standards.
Council directive on the harmonization of the laws of the Member
Certificate number
(if applicable)
relating to non-automatic weighing instruments (90/384/EEC) amended
by directive (93/68/EEC)
relating to electromagnetic compatibility (89/336/EEC) amended by
directive (93/68/EEC; 92/31/EEC)
relating to electrical equipment designed for use within certain voltage
limits (73/23/EEC amended by directive (93/68/EEC)
Relating to electrical equipment designed for use in potentially explosive
atmospheres (94/9/EC) (Refer to note 1)
Worthington, Ohio USA,
December, 2002
EN 45501:1992
TC 2969
Article 1.2.a
EN 55022, B
EN 50082-2
EN 60950
EN 50021 : 1999
EN 50281-1-1 : 1998
(Refer to note 1)
Mettler-Toledo, Inc.
Darrell Flocken, Manager - Weights & Measures
Office of Weights and Measures
Original issue:
Certificate KEMA 02ATEX1163 X applies only to Panther units with a Factory Number of PTPN 1xxx xxx where x
equals any number or letter.
January, 1997
February, 1997
November, 2000
December, 2002
added compliance to Non-automatic Weighing Instrument Directive
added compliance to Heavy Industrial Immunity, EN 50082-2
added compliance to ATEX Directive for Factory Number PTPN 1xxx xxx.
According to EN 45014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF