solid state amplifiers Exciters/All-in-One Transmitters Solid State Amplifiers Tube Amplifiers Radio Links Solid state transmitters Liquid Cooled transmitters Tube transmitters Numerical Radio transmitters Telemetry & Changeover Audio & RDS equipment Accessories 1 solid state transmitter TX8K PLUG-IN CA >Plug-in Compact series Features >Tunable over entire FM band (87.5 – 108 MHZ), without tuning. >Overall efficiency better than 70%. >Hot-pluggable and broadband power amplifier modules. >Each module features switching mode power supply to control and stabilize power supply voltage. >Each amplifier module provides Automatic Power Control. >Suitable for mono & stereo broadcast operations. >Protection against high VSWR, overdrive, overcurrent and overtemperature. >Compliance to IEC safety standards. >Compliance to ETSI – CCIR – FCC standards. >Entire transmitter can be switched off through an emergency button. >High redundancy guaranteed by 4 power modules of 2.2 kW RF power. >All measurement and working parameters are displayed on front panel. >Remotely controllable by telemetry system. >Design for 24/7 non-stop operation. >The transmitter include an integrated system for automatic and manual switching between two exciters. In Automatic mode the changeover is activated when active power of exciter falls below 3dB. Caratteristiche TX10KSS/60D41 front view > Sintonizzabile su tutta la banda FM (87.5 - 108 MHz), senza messa a punto. > Efficienza complessiva migliore del 70%. > Moduli amplificatori di potenza di tipo hot-plug e a banda larga. > Ogni modulo include un alimentatore switching che regola e stabilizza la tensione di alimentazione. > Ogni modulo amplificatore offre la funzione di Controllo della Potenza Automatica. > Adatto per trasmissioni in banda larga sia stereo che mono. > Protezione contro alto ROS, sovrapilotaggio, sovracorrente e sovratemperatura. > Conformità alle norme di sicurezza IEC. > Conformità agli standard ETSI - CCIR - FCC. > Tutto il trasmettitore può essere disattivato tramite un pulsante di emergenza. > Alta ridondanza garantita da 4 moduli di potenza di 2,2 kW di potenza RF. > Tutte le misure ed i parametri di lavoro vengono visualizzati sul pannello frontale. > Controllabile da remoto attraverso il sistema di telemetria. > Progettato per funzionamento no-stop 24/7. > Il trasmettitore comprende un sistema integrato per la commutazione automatica e manuale tra due eccitatori. In modalità automatica lo scambio si attiva quando la potenza attiva di eccitazione scende al di sotto dei 3dB. ISO 9001:2000 certified since 2000 Via del Fonditore, 2/2c • Zona Industriale Roveri • 40138 Bologna • Italy Phone: +39 051 6010506 • Fax: +39 051 6011104 • [email protected] • www.RVR.it ELETTRONICA solid state transmitter Technical specifications solid state amplifiers 8.5 kW All pictures are RVR’s property and they are only indicative and not binding. The pictures can be modified without notice. These are general specifications. They show typical values and are subject to change without notice. Revision: 06/14 Ordering Information Example Code Description ___________________________________________________________________ TX8KSS/60D41 FM plug-in transmitter, 8kW (composed of PJ8KPS-CA + 2x PTX30DDS) TX8KSS/41D41 FM plug-in transmitter, 8kW (composed of PJ8KPS-CA + 2x PTX30LCDDSP) TX8KSS/20D41 FM plug-in transmitter, 8kW (composed of PJ8KPS-CA + 2x PTX30LCD) TX8KSS/60S41 FM plug-in transmitter, 8kW (composed of PJ8KPS-CA + PTX30DDS) TX8KSS/41S41 FM plug-in transmitter, 8kW (composed of PJ8KPS-CA + PTX30LCDDSP) TX8KSS/20S41 FM plug-in transmitter, 8kW (composed of PJ8KPS-CA + PTX30LCD) ISO 9001:2000 certified since 2000 Via del Fonditore, 2/2c • Zona Industriale Roveri • 40138 Bologna • Italy Phone: +39 051 6010506 • Fax: +39 051 6011104 • [email protected] • www.RVR.it ELETTRONICA
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021