Energy Saving Brochure Warehouses Manufacturing Retail Stores

Energy Saving Brochure Warehouses Manufacturing Retail Stores
TM
Energy Saving Brochure
Warehouses
Manufacturing
Retail Stores
Gymnasiums
Cafeterias
Food Processing
And much more!
Visit us online at HowardLightingProducts.com or call us at 800.956.3456.
2
Howard Lighting Overview
We are your one source for lighting needs ......................................
Howard has many lighting solutions to save you time, energy and money. Our LED roadway
and track lighting systems are just two of the many LED solutions we offer. You will save
time because the long LED life reducing maintenance needs. You will save energy because
LEDs operate using almost half the energy than the system it is replacing. The benefits of
saving time and money will also translate to you saving money! A reduction in maintenance
costs, replacements costs, and energy costs over time will give you a payback that makes
switching to LED lighting well worth the investment!
Howard also offers linear fluorescent lighting solutions that also will save you time, energy
and money. Compared to HID lighting systems, linear fluorescent fixtures operate at
reduced energy costs, longer life, which allows for reduced maintenance and upkeep
costs. We offer several linear fluorescent options such as our highbay fluorescents, CEE
listed High Efficiency Ballasts, and CEE listed F32T8 High Lumen linear fluorescent
lamps. Additionally, our recently introduced retrofit strip kit will allow you to convert a
old magnetic fluorescent strip to a newer electronic fluorescent T8 strip without having to
replace the whole fixture. You simply add the retrofit kit over the existing system! We offer
our retrofit kit strips in both four and eight foot options.
In addition we offer a full line of Induction lighting products. An induction lamp is an
electrodless lamp that offers greater efficiency, longer life (up to 100K hours), and lower
maintenance costs compared to HID lighting. With a smaller up front cost than LED,
Induction lighting provides you with a middle road to energy efficiency and lower energy
and maintenance costs.
We are a manufacturer that stands by our products. In addition to the products we offer,
Howard can help you with lighting layouts. Go to our home page and click on the “Lighting
Layout Request” link. If you need to create and test your own photometrics, we can provide
IES files for our products. Want to know how much you can potentially save, go to our
home page and click on the “Cost of Ownership Calculator”. Let us be the solution to your
lighting needs.
.................................................................................. Lighting for life
• Specifications are subject to change without notice.
3
Howard Lighting Overview
Table of Contents
Linear Fluorescent ............................................................................................................................... 4 - 40
Highbay Fluorescent ........................................................................................................................................ 6 - 18
Strip & Troffer Retrofit Kits ........................................................................................................................ 19 - 23
Vaporproof Highbay/Strips and Strips & Wraps ...................................................................................... 24 - 34
Luminaire Efficiencies ........................................................................................................................................... 35
Linear Fluorescent Lamps & Ballast ............................................................................................................ 36- 38
Linear Fluorescent Accessories ......................................................................................................................... 39
Cord Options ........................................................................................................................................................... 40
LED ........................................................................................................................................................... 41 - 47
Exit/Emergency ......................................................................................................................................48-51
Compact Fluorescent ............................................................................................................................... 52 - 53
HID Pulse Start Metal Halide Lamps and Ballast ................................................................................ 54
Self Ballasted Compact Fluorescent Lamps ........................................................................................ 55
Rebate Information .............................................................................................................................. 56 - 57
Howard Lighting Overview ................................................................................................................ 58 - 59
Warranty ................................................................................................................................................ 60 - 62
We make ordering easy!
1
Order Direct
Contact the authorized
representative that you
have purchased from in
the past.
2
Order by phone
You can also contact
us at 800.956.3456 to
discuss your needs or
place an order.
3
Order by fax
Or if you prefer, you
can reach us by fax at
601.422.1652.
• Specifications are subject to change without notice.
4
Linear Fluorescent
Energy Saving Brochure
Linear Fluorescent Fixtures
from Howard are engineered
to the last detail. We ensure our products meet customer and market
expectations. In this guide, we have included detailed information, including
ordering information, about our linear fluorescent, highbays, retrofit kits, strips,
wraps and vaporproof highbays & strips. At the end of our Highbay Fluorescent
section we have included some popular models with efficiency information.
It is estimated that over 4 million commercial buildings currently have older
fluorescent and HID systems. And almost 1 billion inefficient T12 lamps should
be replaced with T5 or T8 lamps.
By optimizing efficiency in our products, we provide fixtures that ensures the
greatest energy and cost savings. You should not have to sacrifice energy
savings or cost savings to get the most out of your investment. Let us be your
solution for lighting efficiency.
• Specifications are subject to change without notice.
5
Energy Saving Brochure
Explanation of our Highbay Fluorescent model number configuration:
HFA#
E
Model
Family
#
32
Number
Of Lamps
Reflector
Type
Page 33
A
SE
CRI/CCT
Page 34
Wattage
Page 34
MV
000
Input
Voltage
Page 34
Ballast Type
Page 34
00
I
Cord
Options
Pages 38-40
Factory
Installed
Options
Page 37
Packaging
Model Family
Each model family is named based on a prescribed design (4 lamps, louvered, tandem, etc).
Reflector Type
We offer three reflector types, enhanced specular aluminum, standard specular aluminum and white reflective.
Number of Lamps
Each model family offers a prescribed number of lamps. For example, HFA1 Series is a 6-lamp highbay and HFB3
Series is a 4-lamp highbay. Additionally, we offer models that are 8 lamps side-by-side (HFC1) and 8 or 12 lamps
that are tandem mounted (HFC7 &HFE7).
Wattage
Wattage relates to the type of lamps you want to run in your fixture. This might be prescribed by a job or engineer.
Our most common types are F32T8 and F54T5/HO.
Color Rendering Index(CRI)/Color Correlated Temperature (CCT)
This will be used when you want to have lamps installed at the time the fixture is built. We offer lamp installation
with several of our models. We include a table to show our lamp offering.
Ballast Type/Input Voltage
The type of ballast required may also be prescribed by job specs. We offer standard and high efficiency ballasts in
several configurations and ballast factors. Multi-volt is the most common voltage.
Factory Installed Options
We offer multiple factory installed options, such as occupancy sensors, emergency ballasts, doors and wire guards.
Cord Options
We offer several cordset options from a standard disconnect to multiple lengths and plug types. It is important to
understand what each ordering code means to ensure you have the proper cord wired with your fixture.
Packaging
Packaging is important. We want to ensure you receive your fixtures the way you need them in the best shape
possible. We offer individual packaging and bulk packaging. Bulk packaging offers less packaging to deal with
when working with contractors to install multiple highbays for a job.
• Specifications are subject to change without notice.
Linear Fluorescent
Linear Fluorescent Model Configuration
Linear Fluorescent
6
Energy Saving Brochure
Highbay Fluorescent Model Families
Benefits include
• Energy saving compared to HID Systems
• Exceptional color rendering
• High system efficacy
• Long lamp life
• Instant on/Re-strike capability
• Howard ballast and lamps as a system is
covered by Howard Industries warranty
• Quality lamp holders
• Computer designed reflectors
• Compliant with safety and performance
standards
Features include
• 3 to 12 lamp options
• Flat or curved profile body
• T8 or T5
• Instant Start or Program Rapid Start Ballasts
• High Efficiency (CEE listed) Ballasts
Additional options+
• Occupancy Sensor
• Door
• Lens
• Wireguard
• Pendant Mount
• Chain Hanging Kits
• Emergency Ballast
HFA#-E-#-32-A-SE-MV-000-01-I
HIB Series
HFLP Series
HFA1 Series
HFA2 Series
HFA3 Series
HFB3 Series
HFC1 Series
HFC7 Series
2-10 lamps
Various Reflector/
Disitrubition Options
6 lamp
Flat profile
6 lamp
Curved profile
8 lamp
Flat profile
HFB9 Series
+ All options are not available on every model. Consult factory.
• Specifications are subject to change without notice.
3 or 4 lamp
Louvered architectural
4 lamps T5
Low profile
4 lamp
Flat profile
4 lamp
Curved profile
8 lamp
Curved profile-tandem
HFE7 Series
12 lamp
Curved profile-tandem
7
Energy Saving Brochure
Linear Fluorescent
HFLP Series - 4 lamp Low Profile Design (T5 only)
Holes for Cable Hanging
Access Plate with Knockout Options
Holes for V-clip
Hanging Option
1.557”
”
300
46.
2.561”
11
.08
0”
Model
Family
HFLP
HFLP
Reflector
(p35)
No. of Lamp Type/
Lamps Wattage(1)
E
E: Enhanced
4
Specular (95%)
A: Spec. Al. (86%)
W: White Refl (91%)
4
CRI/CCT
(p36)
54
T5 Lamps
54: F54T5HO
Ballast
(p36)
A
PS
A: No Lamps
F:
G:
H:
I:
J:
PS: PRS T5
CRI
CCT
T5
85
85
85
85
85
3000
3500
4100
5000
6500
X
X
X
X
X
Input Volts
(p36)
MV
MV: 120-277v
HV: 347-480v (T5HO)
Factory Installed
Options
(p39)
00A
000: No FIOs
A: Occ Sensor(2)(3)
I: Special Wiring
Instructions
Cordset Options
(p40)
T
B
A
07
0
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
11: 16/3, no plug spec len
17: 18/3, no plug spec len
Pack.
I
I: Single
B: Bulk(3)
*Other cordsets available,
consult customer service.
(1) Lamp installation available. See pages 36-37 for more information.
(2) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(3) Bulk packaging is not available when occupancy sensor is ordered as a Factory Installed Option.
Sample Ordering Number:
HFLP E 4 54 A PS MV 00A 07 I
HFLP Series Highbay Fluorescent Low Profile
Enhanced Specular Aluminum Reflector
4-lamps (none installed)
F54T5 Program Rapid Start Ballast
Multi-volt (120-277v)
Occupancy Sensor Installed
Door with lens & safety cable installed
6’ SJT 18/3; L7-15 twist lock 277v Cordset
Single Packaging
• Specifications are subject to change without notice.
Linear Fluorescent
8
Energy Saving Brochure
Highbay Fluorescent HIB Series
Benefits include
• Energy saving compared to HID Systems
• Exceptional color rendering
• High system efficacy
• Long lamp life
• Instant on/Re-strike capability
• Quality lamp holders
• Computer designed reflectors
• Compliant with safety and performance
standards
Occupancy sensor
is inside the fixture,
not coming out of
the ends.
Features include
• 4 lamp (2 to 10 available 2Q2012)
• Heavy duty pre-painted steel construction
• Easy access to wiring compartments & ballast
• T8 or T5
• Instant Start or Program Rapid Start Ballasts
• High Efficiency (CEE listed) Ballasts
Additional options
• Standard or high efficiency designs
• 10% uplight available
• Integral Occupancy Sensor
• Emergency Ballast
• Wireguard
• Chain Hanging Kits
• Cord options
Holes for “v-clip”
or wire-cable
hanging kit
Access Plate
Reflector
(multiple options)
2.43”
48”
DIM A
Low Profile
Design
Dimension A
(Width in inches)
• Specifications are subject to change without notice.
2 Lamps*
8.90”
4 Lamps
13.25”
6 Lamps
16.30”
8 Lamps*
24.10”
10 Lamps*
24.10”
Easy Access Ballast Compartment
Available with surface mount
occupancy sensor
9
Energy Saving Brochure
Model
Family
Distribution/Reflector
(see tables 1-5)
No. of
Lamps
HA
4
HIB
HIB
H: Highbay
F: Highbay
high eff.
U: Highbay
10% uplight
T: Highbay
10% uplight
high eff.
W: Wide
distribution
high eff.
Y: Wide
distribution
10% uplight
high eff.
Lamp Type/
Wattage(1)
(p36)
CRI/CCT
(p36)
Ballast
(p36)
A
PS
54
T8 Lamps
28: F28T8
32: F32T8
E: Enhanced 2*
Specular
A: Spec.
4
W: White
6
8*
10*
* Avail
2Q2012
CRI
CCT
A: No Lamps
B: 75 3000
T5Lamps
C: 75 3500
54: F54T5HO
D: 75 4100
49: F54T5HO/ES E: 75 5000
F: 85 3000
G: 85 3500
H: 85 4100
I: 85 5000
J: 85 6500
K: 85 3000
L: 85 3500
M: 85 4100
N: 85 5000
X
X
X
X
X
X
X
X
Yes
Yes
Yes
Yes
X
X
X
X
Table 1: Fixture Efficiency
Table 2: Fixture Efficiency
2 LAMP
4 LAMP
Type
A
E
W
H
NA
NA
NA
NA
Highbay
NA
NA
NA
NA
F
T8
86
91
84
Highbay
High eff.
T5
88
93
87
U
T8
NA
NA
NA
Highbay
10% uplight
T5
NA
NA
NA
T
Highbay
High eff.
10% uplight
T8
88
93
88
T5
90
95
89
W
T8
78
86
83
Wide Dist.
High eff.
T5
81
88
Y
T8
82
T5
84
Wide Dist.
High eff.
10% uplight
SE: SBF High Eff(2)
HE: HBF High Eff(2)
LE: LBF High Eff(2)
P8: PRS T8(2)
X T5 Program Rapid Start
X PS: PRS T5
X
X
X
E
W
H
85
90
85
Highbay
T5
86
91
85
F
T8
86
91
85
Highbay
High eff.
T5
89
94
88
U
T8
88
93
89
Highbay
10% uplight
T5
90
99
91
T
Highbay
High eff.
10% uplight
T8
88
93
88
T5
91
95
91
W
T8
80
87
85
85
Wide Dist.
High eff.
T5
84
91
88
89
86
Y
T8
84
89
87
91
88
T5
86
92
89
A
E
W
H
T8
83
88
84
U
Highbay
10% uplight
T
Highbay
High eff.
10% uplight
W
Wide Dist.
High eff.
Y
Wide Dist.
High eff.
10% uplight
T5
Type
A
E
W
H
T8
82
88
83
Highbay
T5
F
86
92
88
T8
84
89
83
Highbay
High eff.
T5
88
93
87
U
T8
86
90
87
Highbay
10% uplight
T5
89
93
90
T
T8
87
91
87
T5
91
95
90
Highbay
High eff.
10% uplight
W
T8
79
85
83
Wide Dist.
High eff.
T5
83
89
87
Y
T8
83
88
86
T5
87
92
90
Wide Dist.
High eff.
10% uplight
10 LAMP
Type
F
Dist
Table 5: Fixture Efficiency
Dist
Highbay
High eff.
I
I: Single
B: Bulk
Standard Reflector Option
Standard Reflector Option
8 LAMP
Highbay
01
00: Standard Disconnect
01: 6’, no plug
Integral Occupancy Sensor 02: 10’, no plug
L: Lowbay (20ft MH)
03: 6’, twist lock 120v
H: Highbay (40ft MH)
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
B: Emergency Ballast(5)
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
G: Wireguard
08: 10’ twist lock 277v
I: Special Wiring
09: 6’ non twist lock 277v
Instructions
10: 10’ non twist lock 277v
T: Toggle switch bi-level
(6)
11: 16/3, no plug spec len
lighting cont.
17: 18/3, no plug spec len
22: 6’ 16/3, twist lock 277v
23: 6’ 18/3, twist lock 240v
6 LAMP
A
T8
Table 4: Fixture Efficiency
00L
000: No FIOs
Pack.
Table 3: Fixture Efficiency
Type
Standard Reflector Option
Cordset Options
(p40)
Sample Ordering Number:
HIB HA 4 54 A PS MV 00L 01 I
HIB Series Highbay Fluorescent
Highbay Distribution & Specular Aluminum Reflector
4-lamps (none installed)
F54T5 Program Rapid Start Ballast
Multi-volt (120-277v)
Factory Installed Integral Occupancy Sensor - Lowbay (20ft Mounting Height)
6’ 18/3 SJT cord, no plug
Single Packaging
Dist
Wide Dist.
High eff.
10% uplight
Factory Installed
Options
(p39)
MV
MV: 120-277v
HV: 347-480v
(T5HO)
AX: 480-277(3)
High
T8 T5
Lumen
High Efficiency (CEE)
(1) Lamp installation available. See page 36 & 37 for more information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
(4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(5) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request. See page 51 for more information.
(6) Allows for separate control of two ballasts through simple “toggling” of a standard wall switch.
Recommend use of programmed rapid start ballast with this control.
Dist
Input Volts
(p36)
86
92
88
T8
84
90
84
T5
89
94
88
T8
86
90
87
T5
89
93
91
T8
88
92
87
T5
91
95
91
T8
80
86
94
T5
84
90
88
T8
84
89
87
T5
87
92
90
Standard Reflector Option
Dist
Type
A
E
W
H
T8
78
84
81
T5
87
Highbay
F
Highbay
High eff.
U
Highbay
10% uplight
T
Highbay
High eff.
10% uplight
W
Wide Dist.
High eff.
Y
Wide Dist.
High eff.
10% uplight
84
90
T8
80
86
80
T5
87
92
86
T8
82
87
84
T5
87
92
89
T8
84
88
84
T5
89
94
89
T8
77
83
80
T5
83
89
86
T8
81
85
84
T5
86
90
88
Standard Reflector Option
• Specifications are subject to change without notice.
Linear Fluorescent
Highbay Fluorescent HIB Series
Linear Fluorescent
10
Energy Saving Brochure
HFA1 Series - 6 lamp Flat Profile Design
Holes for “V” clip
& chain hanging
Cable hanging
Factory Installed Option J
Pendant Mount Kit (PMK2)
installs from the outside: no
need to open the fixture
Access plate
3.875”
”
48
19
.87
Model
Family
HFA1
HFA1
5”
Reflector
(p35)
No. of
Lamps
E
E: Enhanced
Specular
A: Spec.
W: White
6
6
CRI/CCT
(p36)
Lamp Type/
Wattage(1)
(p36)
32
28: F28T8
32: F32T8
28:F28T5
54: F54T5HO
A
CRI
CCT
A: No Lamps
B: 75 3000
C: 75 3500
D: 75 4100
E: 75 5000
F: 85 3000
G: 85 3500
H: 85 4100
I: 85 5000
J: 85 6500
K: 85 3000
L: 85 3500
M: 85 4100
N: 85 5000
High
T8 T5
Lumen
X
X
X
X
X
X
X
X
Yes
Yes
Yes
Yes
X
X
X
X
Ballast
(p36)
Input Volts
(p36)
SE
MV
SE: SBF High Eff(2) MV: 120-277v
HE: HBF High Eff(2) HV: 347-480v
LE: LBF High Eff(2) (T5HO)
AX: 480-277(3)
PS: PRS T5
P8: PRS T8(2)
X
X
X
X
X
(1) Lamp installation available. See pages 36 & 37 for more information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
(4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(5) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request. See page 51 for more information.
(6) Standard acrylic prismatic, pattern 12, 0.100” thick. Call for options.
(7) Unless otherwise specified, fixture will include field installed J-box. Supply wires will exit the center of the fixture, not
the access plate. J-box can be installed without entering the fixture.
(8) Allows for separate control of two ballasts through simple “toggling” of a standard wall switch.
Recommend use of programmed rapid start ballast with this control.
• Specifications are subject to change without notice.
Factory Installed
Options
(p39)
000
000: No FIOs
A: Occ Sensor(4)
B: Emergency Ballast(5)
C: Door W/Lens &
Safety Cable(6)
D: Door W/Lens(6)
G: Wireguard
I: Special Wiring
Instructions
J: J-box config.(7)
T: Toggle switch bi-level
lighting cont.(8)
Cordset Options
(p40)
T
B
A
00
0
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Sample Ordering Number:
HFA1 E 6 32 A SE MV 000 00 I
HFA1 Series Highbay Fluorescent
Enhanced Specular Aluminum Reflector
6-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Options
No Cordset
Single Packaging
Pack.
I
I: Single
B: Bulk
11
Energy Saving Brochure
Linear Fluorescent
HFA2 Series - 4 lamp Flat Profile Design
Holes for “V” clip
& chain hanging
Holes for Cable hanging
Factory Installed Option J
Pendant Mount Kit (PMK2)
installs from the outside: no
need to open the fixture
Access plate
3.875”
”
48
13
.75
Model
Family
HFA2
HFA2
”
Reflector
(p35)
No. of
Lamps
E
E: Enhanced
Specular
A: Spec.
W: White
4
4
CRI/CCT
(p36)
Lamp Type/
Wattage(1)
(p36)
54
28: F28T8
32: F32T8
28:F28T5
54: F54T5HO
A
CRI
CCT
A: No Lamps
B: 75 3000
C: 75 3500
D: 75 4100
E: 75 5000
F: 85 3000
G: 85 3500
H: 85 4100
I: 85 5000
J: 85 6500
K: 85 3000
L: 85 3500
M: 85 4100
N: 85 5000
High
T8 T5
Lumen
X
X
X
X
X
X
X
X
Yes
Yes
Yes
Yes
X
X
X
X
Ballast
(p36)
Input Volts
(p36)
PS
MV
SE: SBF High Eff(2) MV: 120-277v
HE: HBF High Eff(2) HV: 347-480v
LE: LBF High Eff(2) (T5HO)
AX: 480-277(3)
PS: PRS T5
P8: PRS T8(2)
X
X
X
X
X
(1) Lamp installation available. See pages 36 & 37 for more information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
(4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(5) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request. See page 51 for more information.
(6) Standard acrylic prismatic, pattern 12, 0.100” thick. Call for options.
(7) Unless otherwise specified, fixture will include field installed J-box. Supply wires will exit the center of the fixture, not
the access plate. J-box can be installed without entering the fixture.
(8) Allows for separate control of two ballasts through simple “toggling” of a standard wall switch.
Recommend use of programmed rapid start ballast with this control.
Factory Installed
Options
(p39)
0AC
000: No FIOs
A: Occ Sensor(4)
B: Emergency Ballast(5)
C: Door W/Lens &
Safety Cable(6)
D: Door W/Lens(6)
G: Wireguard
I: Special Wiring
Instructions
J: J-box config.(7)
T: Toggle switch bi-level
lighting cont.(8)
Cordset Options
(p40)
T
B
A
07
0
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Pack.
I
I: Single
B: Bulk
Sample Ordering Number:
HFA2 E 4 54 A PS MV 0AC 07 I
HFA2 Series Highbay Fluorescent
Enhanced Specular Aluminum Reflector
4-lamps (none installed)
F54T5 Program Rapid Start Ballast
Multi-volt (120-277v)
Occupancy Sensor Installed
Door with lens & safety cable installed
6’ SJT 18/3; L7-15 twist lock 277v Cordset
Single Packaging
• Specifications are subject to change without notice.
Linear Fluorescent
12
Energy Saving Brochure
HFA3 Series - 6 lamp Curved Profile Design
Rigid heavy gage
prepainted steel body
Contractor friendly one
screw access to electrical
connections through this
access plate removable
from the outside
Hinged reflector/socket bar
assembly for easy two screw
access to the ballast compartment
Curved design for
better light distribution
”
48
3.6”
Factory Installed Option J
Pendant Mount Kit (PMK2) installs from the
outside: no need to open the fixture
Wire Cable Hanging mounting option (WCH)
16.
23”
Chain and V-Clip mounting option (CV)
Six 3/4” knockouts for easy wiring access
4 on top and one on each end provides clean
mounting for occupancy sensor
Model
Family
HFA3
HFA3
Reflector
(p35)
No. of
Lamps
E
E: Enhanced
Specular
A: Spec.
W: White
6
6
CRI/CCT
(p36)
Lamp Type/
Wattage(1)
(p36)
32
28: F28T8
32: F32T8
28:F28T5
54: F54T5HO
A
CRI
CCT
A: No Lamps
B: 75 3000
C: 75 3500
D: 75 4100
E: 75 5000
F: 85 3000
G: 85 3500
H: 85 4100
I: 85 5000
J: 85 6500
K: 85 3000
L: 85 3500
M: 85 4100
N: 85 5000
Ballast
(p36)
Input Volts
(p36)
Factory Installed
Options
(p39)
HE
MV
00D
SE: SBF High Eff(2) MV: 120-277v
000: No FIOs
HE: HBF High Eff(2) HV: 347-480v (T5HO) A: Occ Sensor(4)
LE: LBF High Eff(2) AX: 480-277(3)
B: Emergency Ballast(5)
D: Wrap Lens(6)
PS: PRS T5
I: Special Wiring
(2)
P8: PRS T8
Instructions
J: J-box config.(7)
T: Toggle switch bi-level
X
lighting cont.(8)
X
X
X
X
High
T8 T5
Lumen
X
X
X
X
X
X
X
X
Yes
Yes
Yes
Yes
X
X
X
X
(1) Lamp installation available. See pages 36 & 37 for more information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
(4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(5) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request. See page 51 for more information.
(6) Standard acrylic prismatic, pattern 12, 0.100” thick. Call for options.
(7) Unless otherwise specified, fixture will include field installed J-box. Supply wires will exit the center of the fixture, not
the access plate. J-box can be installed without entering the fixture.
(8) Allows for separate control of two ballasts through simple “toggling” of a standard wall switch.
Recommend use of programmed rapid start ballast with this control.
• Specifications are subject to change without notice.
Cordset Options
(p40)
T
B
A
07
0
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Sample Ordering Number:
HFA3 E 6 32 A HE MV 00D 07 I
HFA3 Series Highbay Fluorescent
Enhanced Specular Aluminum Reflector
6-lamps (none installed)
F32T8 High Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
Factory Installed Wrap Lens
6’ SJT 18/3; L7-15 twist lock 277v Cordset
Single Packaging
Pack.
I
I: Single
B: Bulk
13
Energy Saving Brochure
Linear Fluorescent
HFB3 Series - 4 lamp Curved Profile Design
Rigid heavy gage
prepainted steel body
Contractor friendly one
screw access to electrical
connections through this
access plate removable
from the outside
Curved design for
better light distribution
Hinged reflector/socket bar
assembly for easy two screw
access to the ballast compartment
”
48
Factory Installed Option J
Pendant Mount Kit (PMK2) installs from the
outside: no need to open the fixture
3.6”
Wire Cable Hanging mounting option (WCH)
13.0
”
Chain and V-Clip mounting option (CV)
Six 3/4” knockouts for easy wiring access
4 on top and one on each end provides clean
mounting for occupancy sensor
Model
Family
HFB3
HFB3
Reflector
(p35)
No. of
Lamps
E
E: Enhanced
Specular
A: Spec.
W: White
4
4
CRI/CCT
(p36)
Lamp Type/
Wattage(1)
(p36)
32
28: F28T8
32: F32T8
28:F28T5
54: F54T5HO
A
CRI
CCT
A: No Lamps
B: 75 3000
C: 75 3500
D: 75 4100
E: 75 5000
F: 85 3000
G: 85 3500
H: 85 4100
I: 85 5000
J: 85 6500
K: 85 3000
L: 85 3500
M: 85 4100
N: 85 5000
High
T8 T5
Lumen
X
X
X
X
X
X
X
X
Yes
Yes
Yes
Yes
X
X
X
X
Ballast
(p36)
Input Volts
(p36)
P8
MV
SE: SBF High Eff(2) MV: 120-277v
HE: HBF High Eff(2) HV: 347-480v
LE: LBF High Eff(2) (T5HO)
AX: 480-277(3)
PS: PRS T5
(2)
P8: PRS T8
X
X
X
X
X
(1) Lamp installation available. See pages 36 & 37 for more information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
(4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(5) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request. See page 51 for more information.
(6) Standard acrylic prismatic, pattern 12, 0.100” thick. Call for options.
(7) Unless otherwise specified, fixture will include field installed J-box. Supply wires will exit the center of the fixture, not
the access plate. J-box can be installed without entering the fixture.
(8) Allows for separate control of two ballasts through simple “toggling” of a standard wall switch.
Recommend use of programmed rapid start ballast with this control.
Factory Installed
Options
(p39)
Cordset Options
(p40)
T
B
A
07
0
00A
000: No FIOs
A: Occ Sensor(4)
B: Emergency Ballast(5)
D: Wrap Lens(6)
I: Special Wiring
Instructions
J: J-box config.(7)
T: Toggle switch bi-level
lighting cont.(8)
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Pack.
I
I: Single
B: Bulk
Sample Ordering Number:
HFB3 E 4 32 A PS MV 00A 07 I
HFB3 Series Highbay Fluorescent
Enhanced Specular Aluminum Reflector
4-lamps (none installed)
F32T8 Program Rapid Start High Efficiency Ballast
Multi-volt (120-277v)
Occupancy Sensor Installed
6’ SJT 18/3; L7-15 twist lock 277v Cordset
Single Packaging
• Specifications are subject to change without notice.
Linear Fluorescent
14
Energy Saving Brochure
HFC1 Series - 8 lamp Flat Profile Design
Holes for “V” clip
& chain hanging
Cable hanging
Factory Installed Option J
Pendant Mount Kit (PMK2)
installs from the outside: no
need to open the fixture
Access plate
5.5”
”
48
19
.87
Model
Family
HFC1
HFC1
5”
Reflector
(p35)
No. of
Lamps
E
E: Enhanced
Specular
A: Spec.
W: White
8
8
CRI/CCT
(p36)
Lamp Type/
Wattage(1)
(p36)
32
28: F28T8
32: F32T8
28:F28T5
54: F54T5HO
A
CRI
CCT
A: No Lamps
B: 75 3000
C: 75 3500
D: 75 4100
E: 75 5000
F: 85 3000
G: 85 3500
H: 85 4100
I: 85 5000
J: 85 6500
K: 85 3000
L: 85 3500
M: 85 4100
N: 85 5000
High
T8 T5
Lumen
X
X
X
X
X
X
X
X
Yes
Yes
Yes
Yes
X
X
X
X
Ballast
(p36)
Input Volts
(p36)
SE
MV
SE: SBF High Eff(2) MV: 120-277v
HE: HBF High Eff(2) HV: 347-480v
LE: LBF High Eff(2) (T5HO)
AX: 480-277(3)
PS: PRS T5
(2)
P8: PRS T8
X
X
X
X
X
(1) Lamp installation available. See pages 36 & 37 for more information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
(4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(5) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request. See page 51 for more information.
(6) Standard acrylic prismatic, pattern 12, 0.100” thick. Call for options.
(7) Unless otherwise specified, fixture will include field installed J-box. Supply wires will exit the center of the fixture, not
the access plate. J-box can be installed without entering the fixture.
(8) Allows for separate control of two ballasts through simple “toggling” of a standard wall switch.
Recommend use of programmed rapid start ballast with this control.
• Specifications are subject to change without notice.
Factory Installed
Options
(p39)
OCJ
000: No FIOs
A: Occ Sensor(4)
B: Emergency Ballast(5)
C: Door W/Lens &
Safety Cable(6)
D: Door W/Lens(6)
G: Wireguard
I: Special Wiring
Instructions
J: J-box config.(7)
T: Toggle switch bi-level
lighting cont.(8)
Cordset Options
(p40)
T
B
A
01
0
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Sample Ordering Number:
HFC1 E 8 32 A SE MV 0CJ 01 I
HFC1 Series Highbay Fluorescent
Enhanced Specular Aluminum Reflector
8-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
Factory Installed Door with lens and safety cable
Factory Installed J-box mounting plate
6’ SJT 18/3; no plug Cordset
Single Packaging
Pack.
I
I: Single
B: Bulk
15
Energy Saving Brochure
Linear Fluorescent
HFC7 Series - 8 lamp (tandem) Curved Profile Design
Contractor friendly one screw
access to electrical connections
through this access plate.
Removable from outside.
Rigid heavy-gauge
prepainted steel body
Wire cable hanging
mounting option (WCH)
Curved design
for better light
distribution
.0”
96
Chain and V clip
mounting option (CV)
13
.0”
Four 1/2” knockouts for easy wiring access.
2 on top and one on each end provides clean
mounting for occupancy sensor.
Model
Family
HFC7
HFC7
Reflector
(p35)
No. of
Lamps
E
E: Enhanced
Specular
A: Spec.
W: White
8
8
CRI/CCT
(p36)
Lamp Type/
Wattage(1)
(p36)
32
28: F28T8
32: F32T8
28:F28T5
54: F54T5HO
A
CRI
CCT
A: No Lamps
B: 75 3000
C: 75 3500
D: 75 4100
E: 75 5000
F: 85 3000
G: 85 3500
H: 85 4100
I: 85 5000
J: 85 6500
K: 85 3000
L: 85 3500
M: 85 4100
N: 85 5000
High
T8 T5
Lumen
X
X
X
X
X
X
X
X
Yes
Yes
Yes
Yes
X
X
X
X
Ballast
(p36)
Input Volts
(p36)
SE
MV
SE: SBF High Eff(2) MV: 120-277v
HE: HBF High Eff(2) HV: 347-480v
LE: LBF High Eff(2) (T5HO)
AX: 480-277(3)
PS: PRS T5
(2)
P8: PRS T8
X
X
X
X
X
(1) Lamp installation available. See pages 36 & 37 for more information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
(4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(5) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request. See page 51 for more information.
(6) Standard acrylic prismatic, pattern 12, 0.100” thick. Call for options.
(7) Allows for separate control of two ballasts through simple “toggling” of a standard wall switch.
Recommend use of programmed rapid start ballast with this control.
Factory Installed
Options
(p39)
OBD
000: No FIOs
A: Occ Sensor(4)
B: Emergency Ballast(5)
D: Wrap Lens(6)
I: Special Wiring
Instructions
T: Toggle switch bi-level
lighting cont.(7)
Cordset Options
(p40)
T
B
A
01
0
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Pack.
I
I: Single
B: Bulk
Sample Ordering Number:
HFC7 E 8 32 A SE MV 0BD 01 I
HFC7 Series Highbay Fluorescent
Enhanced Specular Aluminum Reflector
8-lamps (none installed)
F32T8 Standard Ballast Factory High Efficiency Ballast
Multi-volt (120-277v)
Factory Installed Emergency Ballast
Factory Installed Wrap Lens
6’ SJT 18/3; no plug Cordset
Single Packaging
• Specifications are subject to change without notice.
Linear Fluorescent
16
Energy Saving Brochure
HFB9 Series - 3 or 4 lamp Louvered Architectural Design
4.31”
10”
48.2”
Model
Family
HFB9
HFB9
Reflector
(p35)
No. of
Lamps
E
E: MIRO-4
Lamp Type/
Wattage(1)
(p36)
4
3
4
Ballast
(p36)
54A
32A: F32T8
54A: F54T5HO
PS
SE: SBF High Eff
HE: HBF High Eff
LE: LBF High Eff
Input Volts
(p36)
Factory Installed Options
T
B
A
00L
00
MV
MV: 120-277v
HV: 347-480v (T5HO)
AX: 480-277(2)
000: No FIOs
L: With Louvers
PS: PRS T5
P8: PRS T8
(1) Lamps not included. See page 36 for lamp ordering information.
(2) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
Chain mount option
Pendant mount option
• Specifications are subject to change without notice.
Sample Ordering Number:
HFB9 E 4 54 A PS MV 0L 00 I
HFB9 Series Highbay Fluorescent
MIRO-4 Reflector
4-lamps (none installed)
F54T5HO Program Rapid Start Ballast
Multi-volt (120-277v)
Factory Installed Louvers
Single Packaging
Pack.
I
I: Single
B: Bulk
17
Energy Saving Brochure
Linear Fluorescent
HFE7 Series - 12 lamp (tandem) Curved Profile Design
Contractor friendly one screw
access to electrical connections
through this access plate.
Removable from outside.
Rigid heavy-gauge
prepainted steel body
Wire cable hanging
mounting option (WCH)
Curved design
for better light
distribution
.0”
96
16
Chain and V clip
mounting option (CV)
.23
”
Four 3/4” knockouts for easy wiring access.
2 on top and one on each end provides clean
mounting for occupancy sensor.
Model
Family
HFE7
HFE7
Reflector
(p35)
No. of
Lamps
E
E: Enhanced
Specular
A: Spec.
W: White
12
12
CRI/CCT
(p36)
Lamp Type/
Wattage(1)
(p36)
54
28: F28T8
32: F32T8
28:F28T5
54: F54T5HO
A
CRI
CCT
A: No Lamps
B: 75 3000
C: 75 3500
D: 75 4100
E: 75 5000
F: 85 3000
G: 85 3500
H: 85 4100
I: 85 5000
J: 85 6500
K: 85 3000
L: 85 3500
M: 85 4100
N: 85 5000
High
T8 T5
Lumen
X
X
X
X
X
X
X
X
Yes
Yes
Yes
Yes
X
X
X
X
Ballast
(p36)
Input Volts
(p3)
PS
MV
SE: SBF High Eff(2) MV: 120-277v
HE: HBF High Eff(2) HV: 347-480v
LE: LBF High Eff(2) (T5HO)
AX: 480-277(3)
PS: PRS T5
(2)
P8: PRS T8
X
X
X
X
X
(1) Lamp installation available. See pages 36 & 37 for more information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
(4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(5) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request. See page 51 for more information.
(6) Standard acrylic prismatic, pattern 12, 0.100” thick. Call for options.
(7) Allows for separate control of two ballasts through simple “toggling” of a standard wall switch.
Recommend use of programmed rapid start ballast with this control.
Factory Installed
Options
(p39)
000
000: No FIOs
A: Occ Sensor(4)
B: Emergency Ballast(5)
D: Wrap Lens(6)
I: Special Wiring
Instructions
T: Toggle switch bi-level
lighting cont.(7)
Cordset Options
(p40)
T
B
A
00
0
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Pack.
I
I: Single
B: Bulk
Sample Ordering Number:
HFE7 E 12 32 A SE MV 000 00 0 I
HFE7 Series Highbay Fluorescent
MIRO-4 Reflector
12-lamps (none installed)
F54T5 Program Rapid Start Ballast
Multi-volt (120-277v)
No Factory Installed Options
No Cordset
Single Packaging
• Specifications are subject to change without notice.
Linear Fluorescent
18
Energy Saving Brochure
Highbay Fluorescent - Linear Fluorescent
Quick Reference+ - These fixtures listed come with CEE** listed high efficiency ballast & lamps and an
enhanced specular aluminum reflector.
Ballast
CEE Listed
Ballast &
Lamps
Luminaire
Efficiency
HFA1E632MSEMV000000I
Yes
0.91
HFA1E654HPSMV000000I
No
0.94
Model Number
Ballast
Factor
Lamps
Fixture
Input
Watts
Lamp Type
Initial Lumens
# of
Lamps
Approx.
Luminaire
Light
Output
Lighting
System
Efficacy
LPW
HFA1 Series - 6 lamps - flat profile design
0.88
166
F32T8/841/HL/ECO/IC
3100
6
14895
90
1.00
360
F54T5/841/HO
5400
6
30456
85
HFA2 Series - 4 lamps - flat profile design
HFA2E432MSEMV000000I
Yes
0.91
HFA2E454HPSMV000000I
No
0.94
0.88
108
F32T8/841/HL/ECO/IC
3100
4
9930
92
1.00
240
F54T5/841/HO
5400
4
20304
85
HFA3 Series - 6 lamps - curved profile design
HFA3E632MSEMV000000I
Yes
0.88
0.88
166
F32T8/841/HL/ECO/IC
3100
6
14404
87
HFA3E654HPSMV000000I
No
0.92
1.00
360
F54T5/841/HO
5400
6
29808
83
HFB3E432MSEMV000000I
Yes
0.9
0.88
108
F32T8/841/HL/ECO/IC
3100
4
9821
91
HFB3E454HPSMV000000I
No
0.93
1.00
240
F54T5/841/HO
5400
4
20088
84
HFC1E832MSEMV000000I
Yes
0.84
HFC1E854HPSMV000000I
No
0.89
HFB3 Series - 4 lamps - curved profile design
HFC1 Series - 8 lamps - flat profile design
0.88
216
F32T8/841/HL/ECO/IC
3100
8
18332
85
1.00
480
F54T5/841/HO
5400
8
38448
80
HFC7 Series - 8 lamps (tandem) - curved profile design
HFC7E832MSEMV000000I
Yes
0.9
0.88
216
F32T8/841/HL/ECO/IC
3100
8
19642
91
HFC7E854HPSMV000000I
No
0.93
1.00
480
F54T5/841/HO
5400
8
40176
84
HFE7 Series - 12 lamps (tandem) - curved profile design
HFE7E1232MSEMV00000I
Yes
0.88
0.88
324
F32T8/841/HL/ECO/IC
3100
12
28808
89
HFE7E1254HPSMV00000I
No
0.92
1.00
720
F54T5/841/HO
5400
12
59616
83
HFB9E432MSEMV000000I
Yes
0.96
0.88
108
F32T8/841/HL/ECO/IC
3100
4
10476
97
HFB9E454HPSMV000000I
No
0.95
1.00
240
F54T5/841/HO
5400
4
20520
86
HFB9 Series - 4 lamps - louvered
* Subject to change without notice. Actual ballast model may differ from that shown in table. Consult factory before ordering.
** T5 ballast and lamps are not CEE listed, but will meet certain efficiency standards required by utility rebates. Consult factory and rebate organizations for more information.
+ Other configurations available
• Specifications are subject to change without notice.
19
Energy Saving Brochure
Benefits include
• Lower cost of ownership through energy
savings
• Modern look
• Modern efficient lamp and ballast technology
• Utility rebates
• Reduced cost and waste relative to installing
new fixtures
Features include
• Code gauge steel
• 1 to 4 lamp options
• High quality lamp holders
• Designed for trouble-free installation
• T8 or T5
• Instant Start or Program Rapid Start Ballasts
• High Efficiency (CEE listed) Ballasts
Additional options+
• Reflector options
• Emergency Ballast
HUGE ENERGY
REDUCTION WITH
BRIGHTER LIGHT
AND LESS HEAT!
Reflector sold
separately!
See page 23
FSR4 Series
1 or 2 lamp
4’ Strip Channel Retrofit
FSR8 Series
2 or 4 lamp
8’ Strip Channel Retrofit
Did You Know?
NEW US DEPT. OF ENERGY
REGULATIONS AS OF JULY 14, 2012:
ALL 75W F96T12 & 110W F96T12HO, AND
MOST 60W F96T12/ES LAMPS
WILL NO LONGER BE MANUFACTURED.
FTR1 Series
2 or 4 foot
2 Lamp T5 Troffer Retrofit
Direct or Indirect
• Specifications are subject to change without notice.
Linear Fluorescent
Strip & Troffer Retrofit Kits
Linear Fluorescent
20
Energy Saving Brochure
FSR4 Series - 4 Foot Fluorescent Strip Retrofit
Existing
fixture
Reflector sold
separately!
See page 23
Geartray tethers
Lampholders
Geartray
Lampholders
Reflector
Reflector
Retainer
Screw
Model
Family
FSR
FSR
Fixture
Length
4
4: Four Foot
Width
No. of
Lamps
4
2
4: 4.25”
1
5: 5”
2
O: Other
(Specify Width)
Lamp Type/
Wattage(1)
(p36)
32A
32A: F32T8
28A:F28T5
54A: F54T5HO
Ballast
(p36)
Input Volts
(p36)
SE
MV
SE: SBF High Eff(2) MV: 120-277v
HE: HBF High Eff(2) HV: 347-480v (T5HO)
LE: LBF High Eff(2) AX: 480-277(3)
000
000: No FIOs
Cordset Options
(p40)
T
B
A
00
0
00: Standard Disconnect
PS: PRS T5
P8: PRS T8(2)
(1) Lamps not included. Please use “PS” Ballast Ordering Options for T5 lamp type. See page 36 for lamp ordering information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
• Specifications are subject to change without notice.
Factory Installed Options
Sample Ordering Number:
FSR 4 4 2 32A SE MV 000 00 0 I
FSR4 Fluorescent Strip Retrofit Kit
4-foot 4.25” Wide Cover
2-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Options
No Cordset
Single Packaging
Pack.
I
I: Single
21
Energy Saving Brochure
Reflector sold
separately!
See page 23
Existing
fixture
Geartray tethers
Lampholders
Geartray
Lampholders
Reflector
Reflector
Retainer
Screw
Model
Family
FSR
FSR
Fixture
Length
84
8: Four Foot
Width
No. of
Lamps
4
4: 4.25”
5: 5”
O: Other
(Specify
Width)
4
2
4
Lamp Type/
Wattage(1)
(p36)
32A
32A: F32T8
28A:F28T5
54A: F54T5HO
Ballast
(p36)
Input Volts
(p36)
SE
MV
SE: SBF High Eff(2) MV: 120-277v
HE: HBF High Eff(2) HV: 347-480v (T5HO)
LE: LBF High Eff(2) AX: 480-277(3)
Factory Installed
Options
000
000: No FIOs
Cordset Options
(p40)
T
B
A
00
0
00: Standard Disconnect
Pack.
I
I: Single
PS: PRS T5
P8: PRS T8(2)
(1) Lamps not included. Please use “PS” Ballast Ordering Options for T5 lamp type. See page 36 for lamp ordering information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
Sample Ordering Number:
FSR 8 4 4 32A SE MV 000 00 0 I
FSR8 Fluorescent Strip Retrofit Kit
8-foot 4.25” Wide Cover
4-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Options
No Cordset
Single Packaging
• Specifications are subject to change without notice.
Linear Fluorescent
FSR8 Series - 8 Foot Fluorescent Strip Retofit
Linear Fluorescent
22
Energy Saving Brochure
FTR1 Series - Fluorescent Troffer Retrofit
3.25”
23.75”
Minimum Required Width & Depth
Model
Family
FTR1
FTR1
Fixture
Length
No. of
Lamps
4
2
Lamp Type/
Wattage(1)
(p36)
28A
2: 2’ x 2’
2
14A: F14T5
4: 2’ x 4’
2
28A: F28T5
54A: F54T5HO
Ballast
(p36)
Input Volts
(p36)
PS
PS: Program Rapid Start T5
MV
MV: 120-277v
HV: 347-480v (T5HO)
(1) Lamps not included. Please use “PS” Ballast Ordering Options for T5 lamp type. See page 36 for lamp ordering information.
(2) Please specify Emergency Ballast lumen requirements at time of request. See page 51 for more information.
• Specifications are subject to change without notice.
Factory Installed Options
000
000: No FIOs
B: Emergency Ballast(2)
Sample Ordering Number:
FTR1 4 2 28A PS MV 000 0 I
FTR1 Fluorescent Troffer Retrofit Kit
2ft by 4ft
2-lamps (none installed)
F28T5 Program Rapid Start Ballast
Multi-volt (120-277v)
No Factory Installed Options
White Steel Body
Single Packaging
Body Material
0
0: White Steel
Pack.
I
I: Single
23
Energy Saving Brochure
Quick Reference+
Model #
Description
FSR4 Series
FSR44232AHEMV000000I
FSR4 Fluor. Retrofit Strip, 4-ft, 4.25 Wide, 2 Lamp 32W T8 (1 4’ Retrofit Cover), Instant Start Ballast, High Ballast Factor, High Efficiency, Multi-Volt
FSR44232ASEMV000000I
FSR4 Fluor. Retrofit Strip, 4-ft, 4.25 Wide, 2 Lamp 32W T8 (1 4’ Retrofit Cover), Instant Start Ballast, Standard Ballast Factor, High Efficiency, Multi-Volt
FSR44254APSMV000000I
FSR4 Fluor. Retrofit Strip, 4-ft, 4.25 Wide, 2 Lamp 54W T5 (1 4’ Retrofit Cover), (1) Program Start Multi-Volt Ballast
FSR84432AHEMV000000I
FSR8 Fluor. Retrofit Strip, 8-ft, 4.25 Wide, 4 Lamp 32W T8 (2 4’ Retrofit Covers, High Ballast Factor High Efficiency Multi Volt Ballast
FSR84432ASEMV000000I
FSR8 Fluor. Retrofit Strip, 8-ft, 4.25 Wide, 4 Lamp 32W T8 (2 4’ Retrofit Covers, Instant Start Standard Ballast Factor, High Efficiency, Multi-Volt
FSR84454APSMV000000I
FSR8 Fluor. Retrofit Strip, 8-ft, 4.25 Wide, 4 Lamp 54W T5 (2 4’ Retrofit Covers, (2) Program Start Multi-Volt Ballast
FSR8 Series
FTR1 Series
FTR12214APSMV0000I
FTR1 Direct/Indirect Fluorescent Troffer Retrofit Kit, 2’x2’, Steel, 2 Lamp 14W T5, Programmed Rapid Start, Multi-Volt
FTR14228APSMV0000I
FTR1 Direct/Indirect Fluorescent Troffer Retrofit Kit, 2’x4’, Steel, 2 Lamp 28W T5, Programmed Rapid Start, Multi-Volt
FTR14254APSMV0000I
FTR1 Direct/Indirect Fluorescent Troffer Retrofit Kit, 2’x4’, Steel, 2 Lamp 54W T5, Programmed Rapid Start, Multi-Volt
Field Installed Reflectors
Model #
Description
FSR4-A
FSR4 Retrofit Kit Specular Aluminum Reflector (86%)
FSR4-E
FSR4 Retrofit Kit Enhanced Specular Aluminum Reflector (95%)
FSR4-W
FSR4 Retrofit Kit White Aluminum Reflector (91%)
FSR8-A
FSR8 Retrofit Kit Specular Aluminum Reflector (86%)
FSR8-E
FSR8 Retrofit Kit Enhanced Specular Aluminum Reflector (95%)
FSR8-W
FSR8 Retrofit Kit White Aluminum Reflector (91%)
Experience the savings!
Below is an example of the potential money saved in energy costs for 1 year by retrofitting a T12 Magnetic
Fluorescent Fixtures for an eight foot Retrofit Strip. With energy saving costs like this, the fixtures will pay
for themselves! Also, if you act now, there are rebate incentives with local utilities when you purchase lamps!
Energy Cost Estimator
Existing System
New System
2x 110W T12HO
FSR84432AHI
High Ballast Factor
Fluorescent Strip Retrofit
Hours
burned
per year
4368
Number
of Fixtures
1
Number of
Fixtures
1
Cost per
kWh$
0.12
Watts per
Fixture
(existing
system)
244
Watts per
Fixture
(new
system)
154
Energy
used
per year
(existing
system)
$128
Energy
used per
year (new
system)
$81
Energy Cost
Estimation
Energy saving per
year (per fixture)
$47.00
+ Other model configurations available
• Specifications are subject to change without notice.
Linear Fluorescent
Strip and Troffer Retrofit Kits
Linear Fluorescent
24
Energy Saving Brochure
Vaporproof Highbay and Strips
Benefits include
• High corrosion resistance
• Low dirt depreciation
• Easy maintenance
• Resists abuse
• Durable construction
• Long service life
Features include
• One piece upper body; no seams to crack,
break or leak
• Reinforced fiberglass body is corrosion resistant
• Latches for positive lens retention
• Stainless steel hardware for maximum durability
• High gloss, baked enamel reflective front
• High gasket compression recovery ensures a
solid seal over life of fixture
• Frosted ends and lineal prisms on sides reduce
glare
VHA1 Series
3 to 6 lamps
Vaporproof Highbay
VSA4 Series
1, 2 or 3 lamps
4’ Vaporproof Strip
VSA8 Series
1, 2, 4 or 6 lamps
8’ Vaporproof Strip
Strips and Wraps
Applications
• Great for area lighting, display cases, shops,
sheds, task lighting, storage areas, hallways and
corridors, schools and offices
Features include
• Die-formed code gauge steel
• High gloss baked enamel finish
• NEC compliant luminaire power disconnect
• Shipped fully wired
• Shipped fully assembled (wrap only)
• Tool Free Snap together assembly
• High quality lamp holders
• Numerous knockouts on side, back and ends
• Specifications are subject to change without notice.
FSA4 Series
4’ foot Strip
1 or 2 lamps
FSA8 Series
8’ foot Strip
2 or 4 lamps
FW24 Series
2’ x 4’ Wrap
2 lamps
FW44 Series
4’ x 4’ Wrap
4 lamps
25
Energy Saving Brochure
Linear Fluorescent
VHA1 Series - 3 - 6 lamp Vaporproof Highbay
14.6”
6”
52”
Note: VHA1 comes standard with 2 versatile V-hook mounting brackets.
OR Optional Wire Hanging Kit (FIO option W)
Model
Family
Lens
VHA1
A
VHA1
A: Impact
resistant
acrylic
P: UV
stabilized
polycarb.
CRI/CCT
(p36)
No. of Lamp Type/
Lamps Wattage(1)
(p36)
6
3
4
5
6
32
28: F28T8
32: F32T8
28:F28T5
54: F54T5HO
A
CRI
CCT
A: No Lamps
B: 75 3000
C: 75 3500
D: 75 4100
E: 75 5000
F: 85 3000
G: 85 3500
H: 85 4100
I: 85 5000
J: 85 6500
K: 85 3000
L: 85 3500
M: 85 4100
N: 85 5000
Yes
Yes
Yes
Yes
X
X
X
X
(1) Lamp installation available. See pages 36 & 37 for more information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
(4) Occupancy Sensors should be used with programmed rapid start ballasts for maximum lamp life.
Standard Occupancy Sensor requires neutral wired fixtures (ex. -120v or -277v).
For phase-to-phase voltage applications (240v) advise Customer Service at time of request.
(5) Consult factory when ordering 3 or 5 lamp reflector.
IP66
CERTIFIED
Guardian
seal
™
Input Volts
(p36)
Factory Installed Options
SE
MV
00C
SE: SBF High Eff(2) MV: 120-277v
000: No FIOs
HE: HBF High Eff(2) HV: 347-480v (T5HO) A: Occ Sensor(4)
LE: LBF High Eff(2) AX: 480-277(3)
C: Lens Tether Safety Cable(5)
E: Enhanced Specular
PS: PRS T5
Reflector(5)
(2)
P8: PRS T8
M: End Mount Bracket
R: Rough Service
Lampholders (6LT5)
X
W: Wire Cable Hanging Kit
X
X
X
X
High
T8 T5
Lumen
X
X
X
X
X
X
X
X
Ballast
(p36)
Cordset Options
(p40)
T
B
A
01
0
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Y1: Yellow 6’ STOW, no plug
Pack.
I
I: Single
Sample Ordering Number:
VHA1 A 6 32 A SE MV 00C 01 I
VHA1 Series Vaporproof Highbay Fluorescent
Impact Resistant Acrylic Lens
6-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
Factory Installed Lens Tether Safety Cable
6 foot 18/3 SJT cord
Single Packaging
1500
PSI
• Specifications are subject to change without notice.
Energy Saving Brochure
VSA4 Series - 4 Foot Vaporproof Strip
Wide Distribution Reflector
Basic Reflector
4.13”
6.77”
7.33”
2.23”
Linear Fluorescent
26
51.6”
Model
Family
VSA4
VSA4
Lens
No. of
Lamps
A
A: Impact
resistant
acrylic
P: UV
stabilized
polycarb.
2
1
2
3
CRI/CCT
(p36)
Lamp Type/
Wattage(1)
(p36)
32
28: F28T8
32: F32T8
28:F28T5
54: F54T5HO
F: Deep
impact
resistant
frosted acrylic
A
CRI
CCT
A: No Lamps
B: 75 3000
C: 75 3500
D: 75 4100
E: 75 5000
F: 85 3000
G: 85 3500
H: 85 4100
I: 85 5000
J: 85 6500
K: 85 3000
L: 85 3500
M: 85 4100
N: 85 5000
(1) Lamp installation available. See pages 36 & 37 for more information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(3) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
(4) Wide distribution reflector available with lens option F (frosted acrylic)
High
T8 T5
Lumen
X
X
X
X
X
X
X
X
Yes
Yes
Yes
Yes
X
X
X
X
Ballast
(p36)
Input Volts
(p36)
SE
MV
SE: SBF High Eff(2) MV: 120-277v
HE: HBF High Eff(2) HV: 347-480v (T5HO)
LE: LBF High Eff(2) AX: 480-277(3)
PS: PRS T5
P8: PRS T8(2)
X
X
X
X
X
Factory Installed
Options
Cordset Options
(p40)
T
B
A
00
0
000
000: No FIOs
E: Enhanced specular
aluminum reflector
H: Chain hanging
bracket
I: Special Wiring
Instructions
S: Stainless steel latches
W: Wide distribution
reflector(4)
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
I
I: Single
Sample Ordering Number:
VSA4 A 2 32A SE MV 000 00 I
VSA4 Series 4-Foot Vaporproof Strip
Impact resistant acrylic lens
2-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Options
No Cordset
Single Packaging
1500
PSI
• Specifications are subject to change without notice.
Pack.
Guardian
seal
™
27
Energy Saving Brochure
Linear Fluorescent
VSA8 Series - 8 Foot Vaporproof Strip
4.13”
2.23”
6.77”
7.33”
100.0”
Model
Family
Lens
VSA8
A
VSA8
A: Impact
resistant
acrylic
No. of
Lamps
Lamp Type/
Wattage(3)
(p36)
2
59
8-Foot Lamps 28: F28T8
1(1)
30: F30T8
32: F32T8
2
4-Foot Lamps 28: F28T5
54: F54T5HO
4(2)
6(2)
59: F96T8 (8’)(4)
9S: F96T12 (8’)(4)
9H: F96T12HO (8’)(4)
CRI/CCT
(p36)
Ballast
(p36)
A
CRI
CCT
A: No Lamps
B: 75 3000
C: 75 3500
D: 75 4100
E: 75 5000
F: 85 3000
G: 85 3500
H: 85 4100
I: 85 5000
J: 85 6500
K: 85 3000
L: 85 3500
M: 85 4100
N: 85 5000
SI
High
T8 T5
Lumen
X
X
X
X
X
X
X
X
Yes
Yes
Yes
Yes
X
X
X
X
4-Foot Lamps
SE: SBF High Eff(5)
HE: HBF High Eff(5)
LE: LBF High Eff(5)
PSI
Guardian
seal
MV: 120-277v
AX: 480-277(6)
Factory Installed
Options
000
000: No FIOs
E: Enhanced specular
aluminum reflector
H: Chain hanging
bracket
I: Special Wiring
Instructions
S: Stainless steel latches
PS: PRS T5
P8: PRS T8(5)
(1) Fixture is designed to accept two 8’ lamps. In one-lamp installation, the lamp is offset to one side, not in the center of
the fixture.
(2) Tandem 4’ lamps
(3) Lamp installation available. See pages 36 & 37 for more information.
(4) Consult factory for availability of 8’ T8 and T12 lamps. Two lamp maximum.
(5) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
(6) Step-down autotransformer. Allows hook-up of standard MV ballast to 480v.
1500
MV
8-Foot Lamps
RS: 8-ft T12 HO
SBF Rapid Start
SI: 8-ft T8/T12 SBF
Instant Start
X
X
X
X
X
Input Volts
(p36)
Cordset Options
(p40)
T
B
A
00
0
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Pack.
I
I: Single
B: Bulk
Sample Ordering Number:
VSA8 A 2 59A SI MV 000 00 I
VSA8 Series 8-Foot Vaporproof Strip
Impact resistant acrylic lens
2-lamps (none installed)
F96T8 59W Standard Ballast Factor Ballast
Multi-volt (120-277v)
No Factory Installed Options
No Cordset
Single Packaging
™
• Specifications are subject to change without notice.
Linear Fluorescent
28
Energy Saving Brochure
Vaporproof Strip for Food Processing
Applications
• Meat or prepared food processing plants
• Carwashes
VFP Series
• Bottling plants
2 foot
• Canning plants
4 foot
8 foot
• Pharmaceutical plants
• Any industrial application requiring exposure to
heave hose-down and caustic cleaning chemicals
Options
Features include
• Clear acrylic tube with smooth water shed design
• Water resistant seal
Mounting Options
• Fully gasketed endcaps
• Stainless steel hardware
• Heavy duty steel channel Fixed Mounting Bracket
End Caps is corrosion and rust
White & Stainless Steel
resistant
Stainless Steel
Chain Mount
Mini Receptacle
Mini Connector
Quick Reference+
Model #
Description
VFP2 Series
VFP2A217ASEMV000110I
Vaporproof Food Processing - 2-foot, Acrylic Lens, 2 lamp (not included) F17T8 Standard BF Electronic Instant Start HE Ballast Multi-Volt, 6ft cord
VFP2A224APSMV000110I
Vaporproof Food Processing - 2-foot, Acrylic Lens, 2 lamp (not included) F24T5HO Program Rapid Start Ballast Multi-Volt, 6ft cord
VFP4A232ASEMV000110I
Vaporproof Food Processing - 4-foot, Acrylic Lens, 2 lamp (not included) F32T8 Standard BF Electronic Instant Start HE Ballast Multi-Volt, 6ft cord
VFP4A254APSMV000110I
Vaporproof Food Processing - 4-foot, Acrylic Lens, 2 lamp (not included) F54T5HO Program Rapid Start Ballast Multi-Volt, 6ft cord
VFP8A432ASEMV000110I
Vaporproof Food Processing - 8-foot, Acrylic Lens, 4 lamp (not included) F32T8 Standard BF Electronic Instant Start HE Ballast Multi-Volt, 6ft cord
VFP8A654APSMV000110I
Vaporproof Food Processing - 8-foot, Acrylic Lens, 6 lamp (not included) F54T5HO Program Rapid Start Ballast Multi-Volt, 6ft cord
VFP4 Series
VFP8 Series
+ Other model configurations available
• Specifications are subject to change without notice.
29
Energy Saving Brochure
VFP2
VFP2
No. of
Lamps
Lens
A
2
A: Acrylic
2
3
17
24: F24T5HO
17: F17T8
VFP2 - 2 foot
CRI/CCT
(p36)
Lamp Type/
Wattage(1)
(p36)
Ballast
(p36)
A
CRI
CCT
SE
High
T8 T5
Lumen
A: No Lamps
G: 85 3500
H: 85 4100
No
No
X
X
SE: SBF High Eff(2)
PS: PRS T5
Model
Family
VFP4
VFP4
No. of
Lamps
Lens
A
2
A: Acrylic
2
3
32
32: F32T8
54: F54T5HO
VFP4 - 4 foot
CRI/CCT
(p36)
Ballast
(p36)
A
CRI
CCT
High
T8 T5
Lumen
A: No Lamps
G: 85 3500
H: 85 4100
L: 85 3500
M: 85 4100
No
No
Yes
Yes
X
X
Model
Family
VFP8
VFP8
No. of
Lamps
Lens
A
4
A: Acrylic
4(1)
CRI/CCT
(p36)
32
A
32: F32T8
54: F54T5HO
6(1)
F54T5HO
2
59: F96T8
86: F86T8
CRI
CCT
A: No Lamps
G: 85 3500
H: 85 4100
L: 85 3500
M: 85 4100
No
No
Yes
Yes
(1) 4’ lamps are tandem mounted.
(2) Lamp Installation Available. See pages 36 & 37 for information.
(3) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
98.25”
8’ Fixture
Input Volts
(p36)
6.75”
0
Factory Installed Options
Pack.
I
I: Single
Cordset Options
T
B
A
0
000
11
000: No FIOs
S: Stainless Steel Endcaps
F: Stainless Steel Fixed Mounting
B: Stainless Steel Band Mounting
11: 6ft 16AWG 3-cond STOW
cable
3R: 3-wire mini-receptacle male
4R: 4-wire mini-receptacle male
3S: 3-wire mini connector 6ft
4S: 4-wire mini connector 6ft
Pack.
I
I: Single
Sample Ordering Number:
VFP4 A 2 32 A SE MV 000 11 I
VFP4 Series Vaporproof Strip for Food Processing
4 foot with acrylic lens
2-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Option
18/3 SJT cord
Single Packaging
VFP8 - 8 foot
X
X
X
X
11
11: 6ft 16AWG 3-cond STOW
cable
3R: 3-wire mini-receptacle male
4R: 4-wire mini-receptacle male
3S: 3-wire mini connector 6ft
4S: 4-wire mini connector 6ft
MV
Ballast
(p36)
X
X
000
000: No FIOs
S: Stainless Steel Endcaps
F: Stainless Steel Fixed Mounting
B: Stainless Steel Band Mounting
MV: 120-277v
HV: 347-480v
(T5HO)
HL: High Lumen
Ballast (T8)
X
X
X
X
High
T8 T5
Lumen
T
B
A
SE
6.75”
Lamp Type/
Wattage(1)
(p36)
Cordset Options
SE: SBF High Eff(2)
PS: PRS T5
(1) Lamp Installation Available. See pages 36 & 37 for information.
(2) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
50”
4’ Fixture
Factory Installed Options
Sample Ordering Number:
VFP2 A 2 17 A SE MV 000 11 I
VFP2 Series Vaporproof Strip for Food Processing
2 foot with acrylic lens
2-lamps (none installed)
F17T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Option
18/3 SJT cord
Single Packaging
6.75”
Lamp Type/
Wattage(1)
(p36)
MV
MV: 120-277v
HV: 347-480v
(T5HO)
X
X
(1) Lamp Installation Available. See pages 36 & 37 for information.
(2) High Efficiency ballasts are CEE Listed. See pages 37 & 38 for more information.
26”
2’ Fixture
Input Volts
(p36)
Input Volts
(p36)
Factory Installed Options
Cordset Options
T
B
A
0
SE
MV
000
11
SE: SBF High Eff(3)
PS: PRS T5
MV: 120-277v
HV: 347-480v
(T5HO)
HL: High Lumen
Ballast (T8)
000: No FIOs
S: Stainless Steel Endcaps
F: Stainless Steel Fixed Mounting
B: Stainless Steel Band Mounting
11: 6ft 16AWG 3-cond STOW
cable
3R: 3-wire mini-receptacle male
4R: 4-wire mini-receptacle male
3S: 3-wire mini connector 6ft
4S: 4-wire mini connector 6ft
Pack.
I
I: Single
Sample Ordering Number:
VFP8 A 4 32 A SE MV 000 11 I
VFP8 Series Vaporproof Strip for Food Processing
8 foot with acrylic lens
4-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Option
18/3 SJT cord
Single Packaging
• Specifications are subject to change without notice.
Linear Fluorescent
Model
Family
Linear Fluorescent
30
Energy Saving Brochure
FSA4 Series - 4 Foot Fluorescent Strip
4.5”
2.62”
48”
Dimples
(4 places)
7/8” Knock Outs
(8 places)
48”
3.25”
Model
Family
FSA4
FSA4
Reflector/Lens
No. of
Lamps
0
0: Reflective White Front (86%)
2
1
2
Lamp Type/
Wattage(1)
(p36)
Ballast
(p36)
Input Volts
(p36)
SE
MV
32
32A: F32T8(2)
SE: SBF High Eff(3) MV: 120-277v
HE: HBF High Eff(3)
LE: LBF High Eff(3)
SI: SBF
HI: HBF
LI: LBF
(1) Lamp installation not available. See pages 36 & 37 for more information about ordering lamps.
(2) 32A Option will also run 30 & 28W T8 Energy Saving lamps, but the actual ballast will be the same.
(3) High Efficiency ballasts are CEE Listed. See pages 36 & 37 for more information.
(4) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request. See page 51 for more information.
• Specifications are subject to change without notice.
Factory Installed Options
000
000: No FIOs
B: Emergency Ballast(4)
Cordset Options
(p40)
T
B
A
00
0
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Sample Ordering Number:
FSA4 0 2 32A SE MV 000 00 0 I
FSA4 Series 4-Foot Fluorescent Strip
Reflective White Front
2-lamps (none installed)
F32T8 Standard Ballast Factor High Efficiency Ballast
Multi-volt (120-277v)
No Factory Installed Options
No Cordset
Single Packaging
Pack.
I
I: Single
B: Bulk
31
Energy Saving Brochure
Linear Fluorescent
FSA8 Series - 8 Foot Fluorescent Strip
4.5”
2.62”
Dimples
(4 places)
7/8” Knock Outs
(9 places)
Overall length 96”
Model
Family
FSA8
FSA8
Reflector/Lens
No. of
Lamps
0
0: Reflective White
Front (86%)
2
2
4(1)
Lamp Type/
Wattage(1)
(p36)
96H
32A: F32T8(1)(3)
Ballast
(p36)
SI
SI: Stand. BF Electronic T8
59A: F98T8
96S: F96T12 Slimline
SI: Electronic Instant Start T12
96H: F96T12HO
RS: Electronic Rapid Start T12
(1) Tandem 4’ T8 only
(2) Lamp installation not available. See pages 36 & 37 for more information about ordering lamps.
(3) 32A Option will also run 30 & 28W T8 Energy Saving lamps, but the actual ballast will be the same.
(4) Please specify Emergency Ballast lumen requirements at time of request. See page 51 for more information.
Input Volts
(p36)
MV
MV: 120-277v
Factory Installed
Options
00B
000: No FIOs
B: Emergency Ballast(4)
I: Special Wiring
Instructions
Cordset Options
(p40)
T
B
A
00
0
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Pack.
I
I: Single
B: Bulk
Sample Ordering Number:
FSA8 0 2 96H SI MV 00B 00 0 I
FSA8 Series 8-Foot Fluorescent Strip
Reflective White Front
2-lamps (none installed)
F96T12HO Electronic Rapid Start Ballast
Multi-volt (120-277v)
Factory Installed Emergency Ballast
No Cordset
Single Packaging
• Specifications are subject to change without notice.
Linear Fluorescent
32
Energy Saving Brochure
FW24 Series - 2 Lamp 4 Foot Fluorescent Wrap
Embossed ceiling
bumps (1/8” H)
6 1/4”
3”
9 3/16”
48”
9 3/16”
0.875” knock out
(9 places)
Model
Family
FW24
FW24
Ceiling bump
Reflector/Lens
No. of
Lamps
0
0: Reflective White Front (86%)
2
2
Lamp Type/
Wattage(1)
(p36)
Ballast
(p36)
Input Volts
(p36)
SI
MV
32
32A: F32T8(2)
SE: SBF High Eff(3) MV: 120-277v
HE: HBF High Eff(3)
LE: LBF High Eff(3)
SI: SBF
HI: HBF
LI: LBF
(1) Lamp installation not available. See pages 36 & 37 for more information about ordering lamps.
(2) 32A Option will also run 30 & 28W T8 Energy Saving lamps, but the actual ballast will be the same.
(3) High Efficiency ballasts are CEE Listed. See pages 36 & 38 for more information.
• Specifications are subject to change without notice.
Factory Installed
Options
Cordset Options
(p40)
T
B
A
01
0
000
000: No FIOs
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Sample Ordering Number:
FW24 0 2 32A SI MV 000 01 0 I
FW24 Series 4-Foot Fluorescent Strip
Reflective White Front
2-lamps (none installed)
F32T8 Standard Ballast Factor Ballast
Multi-volt (120-277v)
No Factory Installed Options
6’ SJT 18/3 cord, no plug
Single Packaging
Pack.
I
I: Single
B: Bulk
33
Energy Saving Brochure
Linear Fluorescent
FW44 Series - 4 Lamp 4 Foot Fluorescent Wrap
Embossed ceiling
bumps (1/8” H)
13”
3”
48”
12.56”
0.875” knock out
(4 places)
Model
Family
FW44
FW44
Reflector/Lens
No. of
Lamps
0
0: Reflective White Front (86%)
4
4
Lamp Type/
Wattage(1)
(p36)
Ballast
(p36)
Input Volts
(p36)
SI
MV
32
32A: F32T8(2)
SE: SBF High Eff(3) MV: 120-277v
HE: HBF High Eff(3)
LE: LBF High Eff(3)
SI: SBF
HI: HBF
LI: LBF
(1) Lamp installation not available. See pages 36 & 37 for more information about ordering lamps.
(2) 32A Option will also run 30 & 28W T8 Energy Saving lamps, but the actual ballast will be the same.
(3) High Efficiency ballasts are CEE Listed. See pages 36 & 37 for more information.
(4) Please specify Emergency Ballast (120-277v only) lumen requirements at time of request. See page 51 for more information.
Factory Installed
Options
Cordset Options
(p40)
T
B
A
01
0
00B
000: No FIOs
B: Emergency Ballast(4)
00: Standard Disconnect
01: 6’, no plug
02: 10’, no plug
03: 6’, twist lock 120v
04: 10’ twist lock 120v
05: 6’ non twist lock 120v
06: 10’ non twist lock 120v
07: 6’ twist lock 277v
08: 10’ twist lock 277v
09: 6’ non twist lock 277v
10: 10’ non twist lock 277v
11: 16/3, no plug spec len
12: 16/4, no plug spec len
16: 16’, non twist lock 277v
17: 18/3, no plug spec len
18: 6’, twist lock 480v
19: 10’, twist lock 480v
20: 16’, twist lock 120v
21: 16’, twist lock 277v
Pack.
I
I: Single
B: Bulk
Sample Ordering Number:
FW44 0 2 32A SI MV 00B 01 0 I
FW44 Series 4-Foot Fluorescent Strip
Reflective White Front
4-lamps (none installed)
F32T8 Standard Ballast Factor Ballast
Multi-volt (120-277v)
Factory Installed Emergency Ballast
6’ SJT 18/3 cord, no plug
Single Packaging
• Specifications are subject to change without notice.
Linear Fluorescent
34
Energy Saving Brochure
Linear Fluorescent Strips & Wraps
Quick Reference+
Model #
Description
FSA4 Series
FSA40232ASIMV000000I
FSA4 Fluorescent Strip, 4-foot,NA, 2-Lamp 32w T8, Standard BF Instant Start Ballast Multi-Volt
FSA40232ASIMV00B000I
FSA4 Fluorescent Strip, 4-foot,NA, 2-Lamp 32w T8, Standard BF Instant Start Ballast Multi-Volt, w/ Emergency Ballast (specify lumens)
FSA80432AHEMV000000I
FSA8 Fluorescent Strip, 8-foot,NA, 4 Lamp 32W T8, High BF Instant Start Ballast, High Efficiency Multi-Volt
FSA80432ALEMV000000I
FSA8 Fluorescent Strip, 8-foot,NA, 4 Lamp 32W T8,Low BF Instant Start Ballast, High Efficiency Multi-Volt
FSA80432ASIMV000000I
FSA8 Fluorescent Strip, 8-foot,NA, 4 Lamp 32W T8, Standard BF Instant Start Ballast Multi-Volt
FSA8 Series
FW24 & FW44 Series
FW240232ASIMV000000I
FW24 Fluorescent Wrap 4-Ft, 2-Lamp 32w T8, Standard BF Instant Start Ballast Multi-Volt
FW440432ASIMV000000I
FW44 Fluorescent Wrap 4-Ft, 4 Lamp 32W T8, Standard BF Instant Start Ballast Multi-Volt
Linear Fluorescent Vaporproof Highbays and Strips
Quick Reference+
Model #
Description
VHA1 Series
VHA1A432AHIMV000000I
VHA1 Vaporproof Fluorescent Highbay, Impact Resistant Acrylic Lens, 4 Lamp 32W T8, High BF Instant Start Ballast Multi-Volt,V-hook, Individual Carton
VHA1A454APSMV000000I
VHA1 Vaporproof Fluorescent Highbay, Impact Resistant Acrylic Lens, 4 Lamp 54W T5, Program Start Ballast Multi-Volt, V-hook, Individual Carton
VHA1A632AHIMV000000I
VHA1 Vaporproof Fluorescent Highbay, Impact Resistant Acrylic Lens, 6 Lamp 32W T8, High BF Instant Start Ballast Multi-Volt, V-hook, Individual Carton
VHA1A654APSMV000000I
VHA1 Vaporproof Fluorescent Highbay, Impact Resistant Acrylic Lens, 6 Lamp 54W T5, Program Start Ballast Multi-Volt, V-hook, Individual Carton
VSA4A154APSMV000000I
VSA4 Vaporproof Strip Fluorescent Fixture, Impact Resistant Acrylic Lens, 1 Lamp 54W T5, Program Start Ballast Multi-Volt, Mounting straps included,
Individual Carton
VSA4A232ASEMV000000I
VSA4 Vaporproof Strip Fluorescent Fixture, Impact Resistant Acrylic Lens, 2-Lamp 32w T8,Standard BF Instant Start Ballast, High Efficiency Multi-Volt,
Mounting straps included, Individual Carton
VSA4A254APSMV000000I
VSA4 Vaporproof Strip Fluorescent Fixture, Impact Resistant Acrylic Lens, 2 Lamp 54W T5, Program Start Ballast Multi-Volt, Mounting straps included,
Individual Carton
VSA8A432ASIMV000000I
VSA8 Vaporproof Strip Fluorescent Fixture, Impact Resistant Acrylic Lens, 4 Lamp 32W T8, Standard BF Instant Start Ballast Multi-Volt, Mounting straps
included, Individual Carton
VSA4 Series
VSA8 Series
+ Other model configurations available
• Specifications are subject to change without notice.
35
Energy Saving Brochure
Reflector Options: E - Enhanced Specular Aluminum, A - Standard Specular Aluminum, W - White Reflective
HFA#-E-#-32-A-SE-MV-000-01-I
Series/Reflector Type
HFA1
T8
T5
Enhanced
Specular
91%
94%
Specular
85%
89%
White
86%
89%
T8
T5
Enhanced
Specular
88%
93%
Specular
83%
87%
White
83%
87%
T8
T5
Series/Reflector Type
HFA3
Series/Reflector Type
HFC1
Enhanced
Specular
84%
89%
Specular
79%
83%
White
74%
79%
T8
T5
Enhanced
Specular
88%
92%
Specular
83%
87%
White
83%
87%
Series/Reflector Type
HFE7
Series/Reflector Type
HFA2
T5
Enhanced
Specular
91%
94%
Specular
86%
89%
White
86%
89%
T8
T5
Enhanced
Specular
90%
93%
Specular
84%
88%
White
85%
88%
Series/Reflector Type
HFB3
Series/Reflector Type
HFC7
T8
T5
Enhanced
Specular
90%
93%
Specular
84%
88%
White
85%
88%
T8
T5
96%
95%
Series/Reflector Type
HFB9
Enhanced
Specular
Series/Reflector Type
HFLP
*Luminaire efficiency is the ratio of light output emitted by
the luminaire to the light output emitted by its lamps.
T8
T5
Enhanced
Specular
94%
Specular
89%
White
89%
• Specifications are subject to change without notice.
Linear Fluorescent
Highbay Fluorescent Reflector Material/Luminaire Efficiency*
Linear Fluorescent
36
Energy Saving Brochure
Linear Fluorescent Lamps & Ballast
Each highbay fluorescent model family has a dedicated number of lamps. Our convenient ordering allows
customers to custom order fixtures with or without lamps.
Number of
lamps
Lamp
wattage
Ballast
CRI/CCT
Input Volts
SE-MV
6-32-N
HFA#-E-#-32-A-SE-MV-000-01-I
HFA#-E-6-32-A-SE-MV-000-01-I
Color Rendering Index/Correlated Color
Temperature
Order
High
CRI
CCT
T8 T5
Code*
Lumen
A
NO LAMPS INSTALLED
B
75
3000
No
x
C
75
3500
No
x
D
75
4100
No
x
E
75
5000
No
x
F
85
3000
No
x
x
G
85
3500
No
x
x
H
85
4100
No
x
x
I
85
5000
No
x
x
J
85
6500
No
x
K
85
3000
Yes
x
L
85
3500
Yes
x
M
85
4100
Yes
x
N
85
5000
Yes
x
HE
LE
SE
HI
LI
SI
PS
P8
Ballast Type
T8 High Ballast Factor Instant Start High Efficiency (CEE)
T8 Low Ballast Factor Instant Start High Efficiency (CEE)
T8 Standard Ballast Factor Instant Start High Efficiency (CEE)
T8 High Ballast Factor Instant Start
T8 Low Ballast Factor Instant Start
T8 Standard Ballast Factor Instant Start
T5 Program Rapid Start
T8 Program Rapid Start (CEE)(1)
MV
HV
HX
Input Volts
120-277v Universal
347-480v Universal (T5HO only)
480-277 Step-down autotransformer
(allows hookup of standard MV ballast to 480v)
(1) T8 Program Rapid Start Ballast is recommended in cases of frequent switching (as with
an occupancy sensor). Instant Start T8 is appropriate for most ordinary applications.
(CEE) Howard High Efficiency Ballasts are Consortium for Energy Efficiency listed.
Visit www.CEE1.org for more information.
Correlated Color Temperature (CCT)
2700K
4500K
3000K
Warm White
+ All options are not available on every model. Consult factory.
• Specifications are subject to change without notice.
Bright White
6500K
Daylight White
37
Energy Saving Brochure
Nom.
Watts Bulb Length MOL (in)
(in)
Base
Model #
F25T8/8xx/ES/ECO*
Color Temperature (K)
Lumens Lumens Avg. Life
Initial
Mean
(hours) CRI
(lm)
(lm)
3000
3500
4100
5000
6500
Pkg.
Qty.
Footnotes
T8 Fluorescent Low Mercury
25
T8
48
47.78
Med Bipin
2500
2425
24000
85
X
X
X
X
25
1,2,3, E ,ECO
25
T8
48
47.78
Med Bipin F25T8/8xx/ES/ECO/IC*
2500
2425
24000
85
X
X
X
X
25
1,2,3, E ,ECO
28
T8
48
47.78
Med Bipin
2725
2560
24000
85
X
X
X
X
25
1,2,3, E ,ECO
28
T8
48
47.78
Med Bipin F28T8/8xx/ES/ECO/IC*
2725
2560
24000
85
X
X
X
25
1,2,3, E ,ECO
30
T8
48
47.78
Med Bipin
F30T8/8xx/ES/ECO*
2850
2680
24000
85
X
X
X
25
1,2,3, E ,ECO
32
T8
48
47.78
Med Bipin
F32T8/8xx/HL/ECO*
3100
2950
24000
85
X
X
X
X
32
T8
48
47.78
Med Bipin F32T8/8xx/HL/ECO/IC*
3100
2950
24000
85
X
X
X
X
F28T8/8xx/ES/ECO*
17
T8
24
23.61
Med Bipin
F17T8/7xx
1350
1200
24000
75
X
X
X
17
T8
24
23.61
Med Bipin
F17T8/8xx
1400
1275
24000
83
X
X
X
25
T8
36
35.42
Med Bipin
F25T8/7xx
2150
1925
24000
75
X
X
X
25
T8
36
35.42
Med Bipin
F25T8/8xx
2225
2050
24000
83
X
X
X
32
T8
48
47.22
Med Bipin
F32T8/7xx
2850
2710
24000
75
X
X
X
X
32
T8
48
47.22
Med Bipin
F32T8/8xx
3050
2800
24000
83
X
X
X
X
32
T8
48
47.22
Med Bipin
F32T8/7xx/ECO/IC*
2850
2710
24000
75
X
X
X
X
32
T8
48
47.22
Med Bipin
F32T8/8xx/ECO/IC*
3050
2800
24000
83
X
X
X
25
1,2,3, E ,ECO
X
25
1,2,3, E ,ECO
25
1,2,3, E ,ECO
X
25
1,2,3, E ,ECO
25
1,2,3, E ,ECO
X
25
1,2,3, E ,ECO
25
1,2,3, E ,ECO
X
25
1,2,3, E ,ECO
25
1,2,3, E ,ECO
X
25
1,2,3, E ,ECO
Linear Fluorescent
T8 Linear Fluorescent Lamps
T5 Linear Fluorescent Lamps
Nom.
Watts Bulb Length MOL
(in)
(in)
Base
14
21
28
T5
T5
T5
24
36
48
21.89
33.70
45.52
Med Bipin (G5)
Med Bipin (G5)
Med Bipin (G5)
24
39
54
T5
T5
T5
24
36
48
21.89
33.70
45.52
Med Bipin (G5)
Med Bipin (G5)
Med Bipin (G5)
Model #
Lumens Lumens Avg.
Initial
Mean
Life CRI
(lm)
(lm) (hours)
T5 Standard
1350
1250
2250
2050
2900
2700
T5 High Output
F24T5/8xx/HO
2000
1900
F39T5/8xx/HO
3500
3300
F54T5/8xx/HO
5400
4950
F14T5/8xx
F21T5/8xx
F28T5/8xx
T8 Footnote Legend:
1. Average-rated life is based on 3 hours per start
2. Average-rated life at 12 hours per start will increase life by approximately 25%
(e.g. lamps rated at 24000 would go to 30000)
3. Lumen ratings, CRI and average-rated lamp life subject to change
E. This lamp meets Federal Minimum Efficiency standards
ECO. Low-Mercury fluorescent lamps pass the Federal TCLP for hazardous waste.
Disposal regulations may vary; check local and state regulations
* Meets Consortium of Energy Efficiency (CEE) Standards. Visit www.CEE1.org for more information.
Color Temperature (K)
3000
3500
4100
5000
6500
Pkg.
Qty.
Footnotes
20000
20000
20000
85
85
85
X
X
X
X
X
X
X
X
X
X
X
X
X
25
25
25
1,2,3,4,5,6,7
1,2,3,4,5,6,7
1,2,3,4,5,6,7
20000
20000
20000
85
85
85
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
25
25
25
1,2,3,4,5,6,7
1,2,3,4,5,6,7
1,2,3,4,5,6,7
T5 Footnote Legend:
1. Average-rated life is based on 3 hours per start.
2. Average-rated life at 12 hours per start will increase life by approximately 25%
(e.g., lamps rated at 20000 would go to 25000).
3. Lumen ratings, CRI and average-rated lamp life subject to change.
4. NEMA recommends that ballasts for this lamp have end-of-life shutdown circuitry which will safely
shut the system down in the event of an abnormal end-of-life failure mode. See www.NEMA.org for
details.
5. Minimum start temperature is a function of the ballast; consult the ballast manufacturer.
6. The nominal length of linear fluorescent lamps is typically measured from back of
lampholder to back of lampholder. T5 and T5HO linear lamps are exceptions.
The nominal length given for T5 and T5HO linear lamps is the closest familiar nominal length.
7. Call for availability.
• Specifications are subject to change without notice.
Energy Saving Brochure
Linear Fluorescent Ballasts
CEE Listed
Ballast Factor
Standard
Low
Standard
High
INSTANT START
PROGRAM
RAID START
CEE CEE CEE CEE CEE CEE CEE CEE CEE CEE
Starting
T8 Electronic Fluorescent Ballasts
F32T8**
Model #
Number
of
Lamps
E2/32IS-120MC
2
EP2/32IS/MV/MC
2
EP2/32IS/MV/MC/HE
2
EP3/32IS/MV/MC/HE
3
EP4/32IS/MV/MC/HE
4
EPL2/32IS/MV/MC/HE
2
EPL3/32IS/MV/SC/HE
3
EPL4/32IS/MV/MC/HE
4
EPH2/32IS/MV/MC/HE
2
EPH3/32IS/MV/MC/HE
3
EPH4/32IS/MV/SC/HE
4
EP2/32PRS/MV/MC/HE
2
EP2/32PPRS/MV/MC/HE
2
EP4/32PPRS/MV/SC/HE
4
F32T8/ES (30W)
F32T8/ES (28W)
Input Ballast Ballast
Watts Efficacy
Factor Factor
Input
Voltage
Ballast
Factor
Input
Watts
Ballast
Efficacy
Factor
Ballast
Factor
120V
0.85
59
1.44
0.87
54
1.61
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
0.89
0.89
0.89
0.89
0.88
0.88
0.88
0.88
0.78
0.78
0.78
0.78
0.77
0.77
1.18
1.18
1.18
1.18
1.16
1.16
0.88
0.88
0.88
0.88
0.86
0.86
59
57
55
54
84
83
110
108
48
48
75
74
98
96
74
73
109
107
145
144
57
56
60
60
114
114
1.51
1.56
1.59
1.60
1.05
1.06
0.80
0.81
1.59
1.60
1.04
1.05
0.79
0.80
1.59
1.61
1.06
1.08
0.80
0.81
1.54
1.56
1.47
1.47
0.75
0.76
0.89
0.89
0.89
0.89
0.88
0.88
0.88
0.88
0.78
0.78
0.81
0.81
0.77
0.77
1.18
1.18
1.18
1.18
1.16
1.16
0.90
0.90
0.88
0.88
0.83
0.84
55
54
51
51
79
77
101
100
45
46
71
70
90
98
69
69
99
99
120
120
53
52
56
56
104
104
1.62
1.65
1.74
1.70
1.11
1.14
0.87
0.88
1.59
1.60
1.14
1.15
0.85
0.86
1.71
1.71
1.18
1.19
0.97
0.97
1.67
1.70
1.57
1.57
0.80
0.80
0.89
0.89
0.89
0.89
0.88
0.88
0.88
0.88
0.78
0.78
0.81
0.81
0.77
0.77
1.18
1.18
1.18
1.18
1.16
1.16
0.90
0.90
0.90
0.90
0.85
0.86
F32T8/ES (25W)
Input
Watts
Ballast
Efficacy
Factor
Ballast
Factor
Input
Watts
Ballast
Efficacy
Factor
49
48
49
47
72
70
94
94
41
41
64
63
84
84
64
63
93
92
116
115
52
51
54
54
100
100
1.82
1.85
1.82
1.89
1.22
1.25
0.94
0.94
1.90
1.90
1.26
1.28
0.91
0.91
1.84
1.87
1.25
1.27
1.00
1.01
1.73
1.76
1.67
1.67
0.85
0.86
0.89
0.89
0.89
0.89
0.90
0.90
0.88
0.88
0.78
0.78
0.85
0.85
0.78
0.78
1.18
1.18
1.20
1.20
1.16
1.16
1.00
1.00
0.92
0.92
0.89
0.89
47
46
46
45
68
68
88
88
39
38
63
61
82
81
63
62
86
85
108
109
50
49
50
50
93
93
1.89
1.93
1.92
1.95
1.32
1.32
1.00
1.00
2.00
2.00
1.34
1.39
0.95
0.96
1.87
1.90
1.37
1.40
1.07
1.06
2.00
2.04
1.84
1.84
0.96
0.96
Ballast Factor
Standard
Starting
T5 Electronic Fluorescent Ballasts
PROGRAM
RAID START
Linear Fluorescent
38
F54T5HO**
Model #
Number
of
Lamps
EP2/54HO/PRS/MV/90C/W
2
EP2/54HO/PRS/MV/W/SC
2
EP2/39HO/PRS/MV
2
EP2/28T5/PRS/MV
2
F39T5/HO**
Input
Voltage
Ballast
Factor
Input
Watts
Ballast
Efficacy
Factor
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
1.00
1.00
1.00
1.00
120
117
120
120
0.83
0.85
0.83
0.83
Ballast
Factor
1.00
1.00
F28T5**
Input Ballast Ballast
Watts Efficacy
Factor Factor
90
89
Input
Watts
FC12T5/HO
Ballast
Efficacy
Factor
Ballast
Factor
Input
Watts
Ballvast
Efficacy
Factor
0.85
0.85
0.85
0.85
106
103
104
104
0.80
0.83
0.82
0.82
1.11
1.12
1.05
1.05
67
67
1.57
1.57
CEE: Meets Consortium of Energy Efficiency
Standards
** This is the primary lamp for this ballast. See specs
sheets on our web for other lamps run by this ballast.
• Specifications are subject to change without notice.
39
Energy Saving Brochure
Options and accessories noted on this page do not apply to every linear fluorescent model available. Also, this is
not a complete list of our offering, just the most popular. Please visit our website (www.Howard-Lighting.com) or
call our factory for more information about our accessory offering.
Quick Reference+
Model #
Description
HF 2CV
2' hanging chain & v-clips
HF 3CV
3' hanging chain & v-clips
HF-OS1
120-277 Occ Sensor (Factory Install option A)
HF-PMK1
Pendant mount kit: Cover, box, anchor plate, screws and lock nuts
HF-PMK2
Pendant mount kit: Cover, J-box, screws and lock nuts (Factory Install Option J)
HF-SK1
Stabilizer kit: Hub, collar and wire cable
HF-WCH
Wire cable hanging kit (2 pcs. Per kit)
HFA1-WG
Wire Guard (Factory Install Option G)
HFA2-WG
Wire Guard (Factory Install Option G)
HFA3-WG
Wire Guard (slide on/off; lens or no lens)
HFA3-WL
HFA3 Series Wrap Lens
HFB3-WG
Wire Guard
HFC7-WL
HFC7 Series Wrap Lens
HFE7-WG
Wire Guard
HFE7-WL
HFE7 Series Wrap Lens
+ Other options available
• Specifications are subject to change without notice.
Linear Fluorescent
Linear Fluorescent Fixture Accessories & Options
Energy Saving Brochure
Linear Fluorescent Standard Cord Options
277 volt NEMA L7-20 Twist Lock Plug
W
G
L7 - 20P
Catalog Option #00
Standard Luminaire Power Disconnect Plug
(actual style may vary)
with NEMA L7-20 twist lock plug (277v)
Catalog Option #31
10-foot SJTW (300v) 16/3 cord
Catalog Option #11
STW (600v) 16/3 cord, specify length
NO PLUG
NO PLUG
Catalog Option #02
Catalog Option #12
10-foot SJT (300v) 18/3 cord,
6- foot STW (600v) 16/4 cord
NO PLUG
NO PLUG
Catalog Option #17
240 volt NEMA L6-15 Twist Lock Plug
X
G
Y
Catalog Option #29
L6 - 15P
6-foot SJT (300v) 18/3 cord,
Catalog Option #23
6-foot SJTW (300v) 18/3 cord
with NEMA L6-15 twist lock plug (240v)
Catalog Option #30
10-foot SJTW (300v) 18/3 cord
with NEMA L6-15 twist lock plug (240v)
SJT (300v) 18/3 cord, specify length STW (600v) 14/3 cord, specify length
NO PLUG
240 volt NEMA L6-20 Twist Lock Plug
120 volt NEMA 5-15 Non Twist Lock Plug
Catalog Option #05
5 - 15P
G
W
6-foot SJT (300v) 18/3 cord
with NEMA 5-15 non twist lock plug (120v)
Catalog Option #06
X
G
Y
L6 - 20P
NO PLUG
Catalog Option #22
6-foot SJTW (300v) 16/3 cord
with NEMA L7-20 twist lock plug (277v)
Cord, No Plug
Catalog Option #01
10-foot SJT (300v) 18/3 cord
Catalog Option #26
6-foot SJTW (300v) 16/3 cord
with NEMA L6-20 twist lock plug (240v)
Catalog Option #27
10-foot SJTW (300v) 16/3 cord
with NEMA L6-20 twist lock plug (240v)
with NEMA 5-15 non twist lock plug (120v)
480 volt NEMA L8-20 Twist Lock Plug
120 volt NEMA L5-15 Twist Lock Plug
Catalog Option #18
Catalog Option #03
6-foot SJTW (300v) 18/3 cord
with NEMA L7-15 twist lock plug (277v)
with NEMA L5-15 twist lock plug (120v)
Catalog Option #04
10-foot SJT (300v) 18/3 cord
with NEMA L5-15 twist lock plug (120v)
Catalog Option #20
16-foot SJT (300v) 18/3 cord
with NEMA L5-15 twist lock plug (120v)
X
G
Y
L8 - 20P
G
L5 - 15P
6-foot SJT (300v) 18/3 cord
W
Catalog Option #19
10-foot SJTW (300v) 18/3 cord
with NEMA L7-15 twist lock plug (277v)
Catalog Option #25
16-foot SJTW (300v) 18/3 cord
with NEMA L7-15 twist lock plug (277v)
Catalog Option #28
16-foot SJTW (300v) 18/3 cord
with NEMA L7-15 twist lock plug (277v)
L5 - 20P
120 volt NEMA L5-20 Twist Lock Plug
W
G
Catalog Option #32
6-foot SJTW (300v) 16/3 cord
with NEMA L5-20 twist lock plug (120v)
Catalog Option #44
10-foot SJTW (300v) 16/3 cord
with NEMA L5-20 twist lock plug (120v)
277 volt NEMA L7-15 Twist Lock Plug
Catalog Option #07
W
G
L7 - 15P
6-foot SJTW (300v) 18/3 cord
with NEMA L7-15 twist lock plug (277v)
Catalog Option #08
10-foot SJTW (300v) 18/3 cord
with NEMA L7-15 twist lock plug (277v)
Catalog Option #21
16-foot SJTW (300v) 18/3 cord
with NEMA L7-15 twist lock plug (277v)
277 volt NEMA 7-15 Non Twist Lock Plug
Catalog Option #09
6-foot SJTW (300v) 18/3 cord
G
W
7 - 15P
Linear Fluorescent
40
with NEMA 7-15 non twist lock plug (277v)
Catalog Option #10
10-foot SJTW (300v) 18/3 cord
with NEMA 7-15 non twist lock plug (277v)
Catalog Option #16
16-foot SJTW (300v) 18/3 cord
with NEMA 7-15 non twist lock plug (277v)
• Specifications are subject to change without notice.
For use with Howard Lighting linear fluorescent luminaires. For more information,
please see spec sheets for our products on
our website at www.Howard-Lighting.com
41
Energy Saving Brochure
Cobraheads
USC-LED Series
55, 80 or 100 watts
100-250W equivalent
48 watts
150W HPS & 100W MH Replacement
PowerLiteTM250-LED Series
Replacement for
250W HPS & MH
NEMA Head
UNH - Induction
40 watts
USC2-LED Series
2in arm casting
w/Wildlife Shield
USC2V-LED Series
2in arm casting
w/Wildlife Shield
Vented LED engine
HLC-LED Series
81 watts
250W HPS & 175W MH equivalent
SecureLiteTM250-LED Series
41W or 62W
Replacement for
100W or 150W HPS,
& 175W MV
Floodlight
ULF-LED Series
40LEDs (98 watts)
80LEDs (196 watts)
50, 90 or 120 watts
100-250W equivalent
UIC - Induction
40 - 250 watts
Replacement for
100-400w HPS
70 - 400w MH
Area Lighter
ALM2 - Area Lighter
Shoebox
100-400w Replacement
• Specifications are subject to change without notice.
LED & Induction
Energy Saving Utility/Roadway & Security Lighting
LED & Induction
42
Energy Saving Brochure
LED Lighting
Applications
• For parking facilities, entry ways,
perimeter/pathway lighting,
underpasses, residential exteriors,
storage areas, building facades, displays,
signs or general security lighting
MWP Series
Features include
• Die-cast housing
• Glass or polycarbonate lens
• High quality long-life LEDs
• Lumens per LED: 90-95
• UL listed
Medium Wallpack
LED / 20 or 30 watts
MCWP2 Series
Medium Cutoff Wallpack
LED / 48 watts
MINIWPP Series
12” Canopy
LED / 20, 40 or 60 watts
• Specifications are subject to change without notice.
SSWP Series
Small Semi-Cutoff Wallpack
LED / 10 watts
MAW Series
Mini Architectural Wallpack
Mini Wallpack
LED / 20 watts
Polycarbonate Lens
LED / 10 watts
LC12 Series
MSWP2 Series
Medium Semi-Cutoff Wallpack
LED / 20 or 30 watts
SFL Series
Small Floodlight
LED / 20 watts
CWP2 Series
Cutoff Wallpack
LED / 48 watts
HFL2 Series
Horizontal Floodlight
LED / 40 watts
CWPO Series
Cutoff Wallpack-Oval Shape
LED / 30 or 48 watts
RGL Series
Round Garage Lighter
LED / 36 watts
43
Energy Saving Brochure
Induction Lighting
LED & Induction
Applications
• For walkways, driveways, tennis
courts, malls shopping centers,
commercial and industrial
complexes, residential areas, park
lighting, signs, and other general
ALA1 Series
ALL Series
Area Light Architectural
Area Light - Large
lighting.
IND / 80, 120 or 150 watts IND / 200 watts
Features include
• Die-cast housing
• High quality powdercoat finish
• Long-life electrodeless induction
lamps
• UL Listed
ARSBF Series
HFL2 Series
ALM1 Series
Area Light - Medium
IND / 80 or 120 watts
RGL Series
Area Light Shoebox
Horizontal Floodlight Round Garage Lighter
IND / 200 or 300 watts
IND / 40 watts
IND / 40 or 80 watts
C19 Series
C12 Series
C08 Series
Large Canopy
Medium Canopy
Small Canopy
IND / 80, 120, or 200 watts IND / 40 or 80 watts IND / 15 or 23 watts
MWP Series
Medium Wallpack
IND / 40 or 60 watts
LDWP2 Series
GHAC16 Series
16” Highbay Acrylic
IND / 120 or 150 watts
GHAC22 Series
22” Highbay Acrylic
IND / 200, or 300 watts
Large Deep Wallpack
IND / 80, 120 or 150 watts
CWP Series
Cut-off Wallpack
IND / 15, 23 or 40 watts
LWP2 Series
Large Wallpack
IND / 80 watts
• Specifications are subject to change without notice.
LED & Induction
44
Energy Saving Brochure
12” LED Canopy
Applications
Whether you are lighting exteriors, entry ways,
breezeways, walkways, perimeters, parking garages,
storage areas, or industrial/commercial spaces, the
Howard Canopy LED fixture is the perfect lighting
solutions.
Description
LED fixtures are extremely durable, providing quality,
efficient maintenance-free illumination for twelve
years. The fixtures can be mounted to a recessed
outlet box or be surface-mounted. With various
distribution patters, the canopy can utilized for
optimal lighting without wasting light.
Features
• Environmentally friendly
• Cost-effective
• Maintenance-free alternative to traditional
lighting.
• Uses up to 75% less energy
• Contain no mercury
Distribution
• Aisle Distribution only lights two sides and the
bottom for aisle lighting.
• Corner Distribution only lights two sides and
bottom for lighting from a corner spot.
• Full Distribution lights all sides and bottom for all
around lighting. This is best used in the center of
a room.
• Horizontal Distribution lights all sides but not the
bottom, this has light output in four directions for
great security lighting.
• Perimeter Distribution is best used around a
perimeter where it is desirable to not light one
wall or area.
• Down Distribution with two light engines is a low
cost option. Used for the middle of the room to
light the floor.
• Down Distribution with four light engines points
downward to below parking area or walkway. It is
used for the middle of a room to light one area.
Ordering Information
Fixture
Model
Family
LC12
12 inch LED
Canopy
Lens Option
# of LEDs/
Output Watts
CCT
P
4041
60
P: Prismatic
2021: 20LED/21W 60: 6000K1
Polycarbonate 2031: 20LED/31W
Lens
4041: 40LED/41W
4060: 40LED/60W
6061: 60LED/61W
6088: 60LED/88W
Light
Distribution
D
A: Aisle
F: Full
C: Corner
H: Horizontal
P: Perimeter
D: Down
Input Voltage
Options
U
B
00
U: 120-277v Electronic Driver B: Bronze 00: No options
1: 120v Electronic Driver
W: White V: Surge
2: 277v Electronic Driver
F: Special Protection
1: 6000 is standard color. Other colors available depending on quantity and lead time. Call factory for options.
2: Bronze is standard color. Other colors available depending on quantity and lead time. Call factory for options.
• Specifications are subject to change without notice.
Housing
Color2
Packaging
I
I: Single
X: Special
Reserved
for Factory
Use
000
TBA
45
Energy Saving Brochure
LED Canopy Technical Data
LC12P2021
LC12P2031
LC12P4041
Total System Watts (Input)
24W
36W
46W
67W
68W
98W
Light Distribution
D
D
A,C,H,P,D
A,C,H,P,D
F
F
Initial Lumens @ 25C Ambient1
1447
@350mA
2114
@500mA
2893
@350mA
3886
@500mA
4300
@350mA
5390
@500mA
Lumens per Watt @ 25C
Ambient
60
57
63
58
63
55
Initial Lumens @ 40C Ambient2
1401
@350mA
2045
@500mA
2801
@350mA
3762
@500mA
4164
@350mA
5218
@500mA
Initial Lumens @ 50C Ambient2
1370
@350mA
2000
@500mA
2740
@350mA
3680
@500mA
4073
@350mA
5104
@500mA
Lighting Facts Labela
No*
No*
Yes,
except D
No*
Yes
No*
Tj @ 25C Ambientb
62
79
79
102
89
116
Safety Margin
50%
36%
37%
18%
29%
c
HID Photometric Equivalentd
70w HPS
50w MH or
100w HPS
1. Based on average performance.
2. Calculation based on Philips LumiLEDs Datasheet.
Lighting Facts
70w MH or
150w HPS
LC12P4060 LC12P6061 LC12P6088
100w MH or 100w MH or
150w HPS
150w HPS
7%
150w HPS
or 200w
HPS
a. Light facts can be seen at www.lightingfacts.com. A program of the US
Department of Energy.
b. Tj is the Junction Temperature of the LED; maximum 125°C for Philips Rebel
LED.
c. Safety margin is the percent margin at which Tj is below maximum of 125°C.
d. Photometric Equivalency based upon Scotopic/Photopic ratios. See Wattage
Cross Reference document for detailed information.
Sample of our label
Lighting Facts showcases LED luminaire
manufacturers who commit to testing products and
reporting performance results according to industry
standards. For lighting buyers, designers, and energy
efficiency programs, the Lighting Facts label provides
information essential to evaluating products and
identifying the best options.
Howard currently has several models that meet the
Lighting Facts requirements. We label each product
sold with this label to clearly identify that our product
that our product is part of the program.
®
You can get more information at:
www.lightingfacts.com
• Specifications are subject to change without notice.
LED & Induction
Model Configuration
46
Energy Saving Brochure
LED & Induction
HID to LED Wattage Cross-Reference
SCOTOPIC/PHOTOPIC MULTIPLIER METHOD*
HID Fixture Info
HID Lamp
Lamp Mean
Lumens
Visually
Effective
Lumens
Exiting Fixture
(Mean)**
LED drive current = 350mA @25°C
System
Input Watts
LED
Equivalent
Input
Wattage
Visually
Effective
Lumens
Exiting
Fixture**
LED drive current = 500mA @25°C
Energy
Savings
LED
Equivalent
Input
Wattage
Visually
Effective
Lumens Exiting
Fixture**
Energy
Savings
70W PSMH
4,400
4,589
85
36
4,538
58%
40
4,554
53%
100W PSMH
5,800
6,049
129
48
6,050
63%
53
6,034
59%
150W PSMH
10,000
10,430
186
83
10,462
55%
92
10,474
51%
175W MH
10,800
11,264
210
89
11,218
58%
99
11,271
53%
200W PSMH
16,800
17,522
234
139
17,520
41%
154
17,533
34%
250W MH
17,000
17,731
292
141
17,772
52%
156
17,760
47%
250W PSMH
19,000
19,817
288
157
19,789
45%
174
19,810
40%
320W PSMH
21,000
21,903
364
174
21,932
52%
192
21,859
47%
350W PSMH
27,000
28,161
400
223
28,108
44%
247
28,120
38%
400W MH
23,500
24,511
460
194
24,453
58%
215
24,477
53%
400W PSMH
31,000
32,333
456
257
32,394
44%
284
32,333
38%
70W HPS
5,350
2,322
91
18
2,269
80%
20
2,277
78%
100W HPS
8,550
3,711
129
29
3,655
78%
33
3,757
74%
150W HPS
14,400
6,250
185
50
6,302
73%
55
6,262
70%
250W HPS
27,000
11,718
295
93
11,722
68%
103
11,726
65%
400W HPS
45,000
19,530
464
155
19,537
67%
172
19,582
63%
PHOTOPIC METHOD
HID Fixture Info
HID Lamp
Lamp Mean
Lumens
Lumens
Exiting Fixture
(mean)**
LED drive current = 350mA @25°C
System
Watts
LED
Equivalent
Input
Wattage
Lumens
Exiting
Fixture
LED drive current = 500mA @25°C
Energy
Savings
LED
Equivalent
Input
Wattage
Lumens Exiting
Fixture
Energy
Savings
70W PSMH
4,400
3,080
85
52
3,063
39%
58
3,248
32%
100W PSMH
5,800
4,060
129
69
4,064
47%
76
4,256
41%
150W PSMH
10,000
7,000
186
119
7,009
36%
132
7,392
29%
175W MH
10,800
7,560
210
128
7,539
39%
142
7,952
32%
200W PSMH
16,800
11,760
234
200
11,780
15%
221
12,376
6%
250W MH
17,000
11,900
292
202
11,898
31%
224
12,544
23%
250W PSMH
19,000
13,300
288
226
13,311
22%
250
14,000
13%
320W PSMH
21,000
14,700
364
250
14,725
31%
276
15,456
24%
350W PSMH
27,000
18,900
400
321
18,907
20%
355
19,880
11%
400W MH
23,500
16,450
460
279
16,433
39%
309
17,304
33%
400W PSMH
31,000
21,700
456
368
21,675
19%
408
22,848
11%
70W HPS
5,350
3,745
91
64
3,770
30%
70
3,920
23%
12%
100W HPS
8,550
5,985
129
102
6,008
21%
113
6,328
150W HPS
14,400
10,080
185
171
10,072
8%
189
10,584
-2%
250W HPS
27,000
18,900
295
321
18,907
-9%
355
19,880
-20%
400W HPS
45,000
31,500
464
535
31,512
-15%
592
33,152
-28%
*Scotopic refers to visual perception in low light , photopic refers to color perception in normal light . The ratio of Scotopic light vs. Photopic light is called the S/P ratio.
This ratio determines the apparent visual brightness of a light source. Higher S/P ratios appear brighter to the human eye. See:
“Energy Efficiency Consequences of Scotopic Sensitivity”, Dr. Sam Berman, Journal of the IES, Vol 21 No.1, Dec. 1992
“The Coming Revolution in Lighting Practice”, Dr. Sam Berman, http://www.lightenergysource.com/ScotopicTechnical.htm
**Scotopic/Photopic ratios used: MH/PSMH = 1.49, HPS = 0.62, LED (6500K) = 2.14. HID fixtures assumed to be 70% optically efficient., actual efficiency will vary.
Mean lumens of 95% used for LED.
The HI Lighting Calculator is provided to assist users in making lighting decisions based on various assumptions, factors. and methods. Efforts have been
made to ensure accurate assumptions in developing this tool, however, HOWARD INDUSTRIES DOES NOT WARRANT OR GUARANTEE, EITHER EXPRESS OR
IMPLIED, THAT THE RESULTS OBTAINED HEREIN WILL BE OBTAINABLE UNDER ACTUAL USE CONDITIONS. HOWARD INDUSTRIES IS NOT RESPONSIBLE
FOR ANY LOSS RESULTING FROM THE USE OF THIS TOOL.
• Specifications are subject to change without notice.
47
Energy Saving Brochure
HID to Induction Wattage Cross-Reference
HID Lamp
Lamp Mean
Lumens
Visually Effective
Lumens Exiting
Fixture (Mean)**
Induction Lamp, 6500K
System Input Watts
Induction Equivalent
Input Wattage
Visually Effective
Lumens Exiting
Fixture (mean)**
Energy Savings
70W PSMH
4,400
4,589
85
55
4,614
35%
100W PSMH
5,800
6,049
129
72
6,040
44%
150W PSMH
10,000
10,430
186
124
10,402
33%
175W MH
10,800
11,264
210
134
11,241
36%
200W PSMH
16,800
17,522
234
209
17,533
11%
250W MH
17,000
17,731
292
211
17,700
28%
250W PSMH
19,000
19,817
288
236
19,798
18%
320W PSMH
21,000
21,903
364
261
21,895
28%
350W PSMH
27,000
28,161
400
336
28,186
16%
400W MH
23,500
24,511
460
292
24,495
37%
400W PSMH
31,000
32,333
456
385
32,297
16%
70W HPS
5,350
2,322
91
28
2,349
69%
100W HPS
8,550
3,711
129
44
3,691
66%
150W HPS
14,400
6,250
185
74
6,208
60%
250W HPS
27,000
11,718
295
140
11,744
53%
400W HPS
45,000
19,530
464
233
19,546
50%
PHOTOPIC METHOD
HID Fixture Info
HID Lamp
Lamp Mean
Lumens
Lumens Exiting
Fixture (mean)**
Induction Lamp, 6500K
System Watts
Induction Equivalent
Input Wattage
Lumens Exiting
Fixture (mean)
Energy Savings
70W PSMH
4,400
3,080
85
79
3,097
7%
100W PSMH
5,800
4,060
129
104
4,077
19%
150W PSMH
10,000
7,000
186
179
7,017
4%
175W MH
10,800
7,560
210
193
7,566
8%
200W PSMH
16,800
11,760
234
300
11,760
-28%
250W MH
17,000
11,900
292
304
11,917
-4%
250W PSMH
19,000
13,300
288
339
13,289
-18%
320W PSMH
21,000
14,700
364
375
14,700
-3%
350W PSMH
27,000
18,900
400
482
18,894
-21%
400W MH
23,500
16,450
460
420
16,464
9%
400W PSMH
31,000
21,700
456
554
21,717
-21%
70W HPS
5,350
3,745
91
96
3,763
-5%
100W HPS
8,550
5,985
129
153
5,998
-19%
150W HPS
14,400
10,080
185
257
10,074
-39%
250W HPS
27,000
18,900
295
482
18,894
-63%
400W HPS
45,000
31,500
464
804
31,517
-73%
*Scotopic refers to visual perception in low light , photopic refers to color perception in normal light . The ratio of Scotopic light vs. Photopic light is called the S/P ratio. This ratio
determines the apparent visual brightness of a light source. Higher S/P ratios appear brighter to the human eye. See:
“Energy Efficiency Consequences of Scotopic Sensitivity”, Dr. Sam Berman, Journal of the IES, Vol 21 No.1, Dec. 1992
“The Coming Revolution in Lighting Practice”, Dr. Sam Berman, http://www.lightenergysource.com/ScotopicTechnical.htm
**Scotopic/Photopic ratios used: MH/PSMH = 1.49, Induction = 2.14. Both HID & induction fixtures assumed to be 70% optically efficient., actual efficiency will vary. Mean lumens of 80%
used for induction.
The HI Lighting Calculator is provided to assist users in making lighting decisions based on various assumptions, factors. and methods. Efforts have been made to ensure accurate
assumptions in developing this tool, however, HOWARD INDUSTRIES DOES NOT WARRANT OR GUARANTEE, EITHER EXPRESS OR IMPLIED, THAT THE RESULTS OBTAINED HEREIN WILL
BE OBTAINABLE UNDER ACTUAL USE CONDITIONS. HOWARD INDUSTRIES IS NOT RESPONSIBLE FOR ANY LOSS RESULTING FROM THE USE OF THIS TOOL.
• Specifications are subject to change without notice.
LED & Induction
SCOTOPIC/PHOTOPIC MULTIPLIER METHOD*
HID Fixture Info
Exit/Emergency
48
Energy Saving Brochure
Exit Signs and Combo Units
Features include
• Self contained
• Snap-fit faceplates
• Universal mounting
• Universal voltage
• Battery backup (some models)
• Remote capabilities (some models)
• Self diagnostics (some models)
• UL listed
HL0201 Series
HL0210 Series
Die-Cast Aluminum
LED Exit Sign
HL0205 Series
Steel Exit Signs
HL0301 Series
Slimline Thermoplastic
LED Exit Sign
Slimline Thermoplastic
LED Exit Sign
HLSLXTU Series
Tritium Self Luminous
HL0409 Series
Thermoplastic LED
Exit/Emergency Combo
HL0226 Series
Wet Location
Exit Sign
City of New York
Edge Lite LED Exit Sign
Remote or Surface Mount
• Specifications are subject to change without notice.
HL0214 Series
Thermoplastic LED
Exit/Emergency Combo
HL0228 Series
Wet Location
Exit/Emergency Combo
HL0311 Series
LED “Lightpipe”
Exit/Emergency Combo
HL0203NY Series
HL0203 Series
Edge Lite LED Exit Sign
Remote or Surface Mount
HL0211 Series
Low Profile Die-Cast
Aluminum LED Exit Sign
HL0210NY Series
City of New York
Die-Cast Aluminum
LED Exit Sign
HL0204 Series
City of Chicago
Exit Sign
HL0245NY Series
City of New York
Exit/Emergency
Combo Unit
49
Energy Saving Brochure
Features include
• Injection molded design
• High impact
• Universal voltage
• Remote capabilities (some models)
• Self diagnostics (some models)
• UL listed
HL0242 & HL0244 Series
50W High Wattage
Emergency Light
HLR16 Series
Halogen
Emergency Light
HL0243 & HL0245 Series
100W High Wattage
Emergency Light
HLRMR Series
Halogen
Emergency Light
HL202 Series
HL223W Series
Adjustable Optics
Emergency Light
Fixed Optics
Emergency Light
HLTFX-2 Series
Wet Location
Emergency Light
HLR-7 Series
HLEMRL-1 Series
Recessed
Emergency Light
HLCA26S10 Series
Recessed
Emergency Light
City of Chicago
Emergency Light
Remote Lamp Heads
HLRH16 Series
Remote Heads
1 or 2 heads
Square
HLRHR Series
Remote Heads
1 or 2 heads
Round heads
Weather Proof Heads
Remote Heads
HLRH1WP (1 head)
HLRH2WP (2 heads)
HLRH Series
Remote Heads
1 or 2 heads
Square heads
• Specifications are subject to change without notice.
Exit/Emergency
Emergency Lights
Exit/Emergency
50
Energy Saving Brochure
Exit/Emergency
Quick Reference+
Model #
Description
Exit Signs
HL02012GW
Exit Sign - Thermoplastic LED, White Case/Housing, Green Letters, AC only
HL02012RW
Exit Sign - Thermoplastic LED, White Case/Housing, Red Letters, AC only
HL0201B2GW
Exit Sign - Thermoplastic LED, White Case/Housing, Green Letters, Battery Backup
HL0301B2GW
Exit Sign - Thermoplastic LED, White Case/Housing, Green Letters, Battery Backup
HL0301B2RW
Exit Sign - Thermoplastic LED, White Case/Housing, Red Letters, Battery Backup
HL0203RB1GA
Exit Sign - Edge Lite LED, Recessed Mount Case/Housing, Green on Clear, Battery Backup
HL0203RB1RA
Exit Sign - Edge Lite LED, Recessed Mount Case/Housing, Red on Clear, Battery Backup
HL0203SB1GA
Exit Sign - Edge Lite LED, Surface Mount Case/Housing, Green on Clear, Battery Backup
HL0203SB1RA
Exit Sign - Edge Lite LED, Surface Mount Case/Housing, Red on Clear, Battery Backup
HL0203SB2GA
Exit Sign - Edge Lite LED, Surface Mount Case/Housing, Green on Clear, Battery Backup
HL0203SB2RA
Exit Sign - Edge Lite LED, Surface Mount Case/Housing, Red on Clear, Battery Backup
HL02101RBA
Exit Sign - Die Cast Aluminum LED, Brushed Aluminum Case/Housing, Red Letters, AC only
HL0210B1RBA
Exit Sign - Die Cast Aluminum LED, Brushed Aluminum Case/Housing, Red Letters, Battery Backup
HL0226BG
Exit Sign - Wet Location LED, White Case/Housing, Green Letters, Battery Backup
HL0226BR
Exit Sign - Wet Location LED, White Case/Housing, Red Letters, Battery Backup
HL0228BG
Combo Exit/Emergency - Light Wet Location LED, White Case/Housing, Green Letters, Battery Backup
HL0228BR
Combo Exit/Emergency - Light Wet Location LED, White Case/Housing, Red Letters, Battery Backup
Combo Exit Signs/Emergency Lights
HL04093GW
Combo Exit/Emergency Light LED, White Case/Housing, Green Letters, Battery Backup
HL04093RW
Combo Exit/Emergency Light LED, White Case/Housing, Red Letters, Battery Backup
HL02143GW
Combo Exit/Emergency Light LED, White Case/Housing, Green Letters, Battery Backup
HL02143GWRC
HL02143RW
HL02143RWRC
Combo Exit/Emergency Light LED, White Case/Housing, Green Letters, Battery Backup, Remote Capable
Combo Exit/Emergency Light LED, White Case/Housing, Red Letters, Battery Backup
Combo Exit/Emergency Light LED, White Case/Housing, Red Letters, Battery Backup, Remote Capable
Emergency Lights
HL0202SW
HL0202RCW
HL0223W
Emergency Light, White Case/Housing, Adjustable Optics
Emergency Light, White Case/Housing, Adjustable Optics, Remote Capable
Emergency Light, White Case/Housing, Fixed Optics, Battery (Lead)
HL0242
Emergency Light, White Case/Housing, Adjustable Optics, 6V, 50w max
HL0243
Emergency Light, White Case/Housing, Adjustable Optics, 6V, 100w max
HL0244
Emergency Light, White Case/Housing, Adjustable Optics, 12V, 50w max
HL0245
Emergency Light, White Case/Housing, Adjustable Optics, 12V, 100w max
HLTFX-2
Emergency Light,White Case/Housing,Adjustable Optics,,Wet Location
Remote Lamp Heads
HLRH1-6V5
Remote Lamp Head, White Case/Housing, Remote Lamp Head for HL0202
HLRH1-6V9
Remote Lamp Head, White Case/Housing, Remote Lamp Head for HL0202
HLRH16-1
Remote Lamp Head, White Case/Housing, Remote Lamp Head for HL0202
HLRH2-6V5
Remote Lamp Head, White Case/Housing, Remote Lamp Head for HL0202
HLRH2-6V9
Remote Lamp Head, White Case/Housing, Remote Lamp Head for HL0202
HLRH1WP-2
Remote Lamp Head-Round Weatherproof, Remote Lamp Head for HL0243
HLRH2-WP-6V7
Remote Lamp Head-Round Weatherproof, Remote Lamp Head for HL0243
• Specifications are subject to change without notice.
+ Other configurations available
51
Energy Saving Brochure
Howard Lighting fluorescent emergency ballasts can be used for both normal and emergency
operations. In the event of a power failure, the unit switches to emergency mode and operates
the existing lamps for a minimum of 90 minutes. Each ballast includes a battery pack, battery
charger, and inverter circuit, and can be top-mounted on the fixture or in the fixture wiring
compartment. All ballasts comply with the latest codes and standards including UL924.
BAL500
T8 Lamp operation
BAL650C-2
CFL Lamp operation
BAL650C-4
CFL/T8/T10/T12
Lamp operation
BAL700
T8/T10/T12
Lamp operation
BALT5-500
T5/T8
Lamp operation
BAL1400
T8/T9/T10/T12/CFL
Lamp operation
BAL3000
T8/T9/T10/T12
Lamp operation
Quick Reference
Model #
BALT5-800
Description
BAL500
Emergency Ballast 350-500 Lumens; operates 1 lamp (min. 90 minutes)
BAL700
Emergency Ballast 600-700 Lumens; operates 1 or 2 lamps (min. 90 minutes)
BAL1400
Emergency Ballast 1100-1400 Lumens; operates 1 or 2 lamps (min. 90 minutes)
BAL3000
Emergency Ballast 1450-3000 Lumens; operates 1 or 2 lamps (min. 90 minutes)
BAL650C-2
Emergency Ballast 300-650 Lumens; 2-pin; operates 1 lamp (min. 90 minutes)
BAL650C-4
Emergency Ballast 300-750 Lumens; 4-pin; operates 1 or 2 lamps (min. 90 minutes)
BALT5-500
Emergency Ballast 450-500 Lumens; operates 1 lamp (min. 90 minutes)
BALT5-800
Emergency Ballast 800 Lumen; operates 1 lamp operates (min. 90 minutes)
BALT5-1300
Emergency Ballast 1300 Lumens; operates 1 or 2 lamps (min. 90 minutes)
T5/T8/CFL
Lamp operation
BALT5-1300
T5/T8/CFL
Lamp operation
• Specifications are subject to change without notice.
Exit/Emergency
Emergency Ballast
52
Energy Saving Brochure
Quick Reference
Electronic Compact Fluorescent
PROGRAM START
Starting
CF13DE**
Model #
Number
of
Lamps
EP2/13CF/MV/K2
2
EP2/18CF/MV/K
2
EP2/26CF/MV/K2
2
EP2/42CF/MV/K2
2
CF18DE**
Input
Voltage
Ballast
Factor
Input
Watts
Ballast
Efficacy
Factor
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
Multi-volt 120
Multi-volt 277
1.00
1.00
29
29
3.45
3.45
Ballast
Factor
1.08
1.08
CF26DE**
Input Ballast Ballast
Watts Efficacy
Factor Factor
44
42
CF42TE**
Input
Watts
Ballast
Efficacy
Factor
51
51
1.96
1.96
Ballast
Factor
Input
Watts
Ballast
Efficacy
Factor
1.00
1.00
94
93
1.14
1.08
2.48
2.54
1.00
1.00
Electronic Compact Fluorescent
Starting
FT40W/2G11**
INSTANT
START
Exit/Emergency
Compact Fluorescent Ballast
Model #
Number
of
Lamps
EP2/40IS-TT/MV/SC
2
EP3/40IS-TT/MV/SC
3
Input
Voltage
Ballast
Factor
Input
Watts
Ballast
Efficacy
Factor
Multi-volt 120
0.84
67
1.25
Multi-volt 277
0.84
65
1.29
Multi-volt 120
0.84
97
0.87
Multi-volt 277
0.84
95
0.88
Compact Fluorescent Fixtures
Quick Reference
Model#
8x8C-26-CF-120
12x12C-52-CF-MV
Model#
MSWF-52-CF-MV
Model#
MINIWPP-26-CF-MV
Model#
MWP-84-CF-MV
• Specifications are subject to change without notice.
Description
Small Canopy 26W CFL 120v
Medium Canopy 52W CFL Multi-volt
Description
Mid-Size Wide Flood 52W CFL Multi-volt
Description
Mini Wallpack Polycarbonate Lens 26W CFL Multi-volt
Description
Medium Wallpack 84W CFL Multi-volt
53
Energy Saving Brochure
Compact Fluorescent Lamps
Lumens
Mean
(lm)
Color Temperature (K)
Watts
Model #
Base
Lumens
Initial (lm)
5
CF5S/827
G23
250
230
110
10000
X
7
CF7S/827
G23
400
360
139
10000
X
X
9
CF9S/827
G23
600
540
170
10000
X
MOL
(mm)
Avg. Life
(hours)
2700
3000
4100
Pkg.
Qty.
X
50
X
50
X
X
50
X
X
50
X
50
3500
Exit/Emergency
Quick Reference
Single Tube (2-Pin G23 Base)
Single Tube (2-Pin GX23 Base)
13
CF13S/830
GX23
800
720
182
10000
X
Single Tube (4-Pin 2G7 Base for Electronic Ballast-Dimmable)
5
CF5SE/827
2G7
250
230
87
10000
X
7
CF7SE/827
2G7
400
360
116
10000
X
X
50
9
CF9SE/827
2G7
600
540
146
10000
X
X
50
13
CF13SE/827
Single Tube
Single Tube (4-Pin 2GX7 Base for Electronic Ballast-Dimmable)
2GX7
800
720
162
10000
X
X
X
50
X
X
X
50
X
X
X
50
Double Tube (2-Pin G23-2 Base)
9
CF9D/827
G23-2
525
475
110
10000
Double Tube (2-Pin GX23-2 Base)
13
CF13D/827
GX23-2
780
700
120
10000
Double Tube (2-Pin G24d-2 Base)
18
CF18D/827
G24d-2
1200
1080
154
10000
X
X
X
X
50
26
CF26D/827
G24d-3
1800
1620
175
10000
X
X
X
X
50
X
X
50
X
X
X
50
X
X
X
50
Double Tube (4-Pin G24q-1 Base for Electronic Ballast)
13
CF13DE/827
G24q-1
900
810
134
10000
X
Double Tube (4-Pin G24q-2 Base for Electronic Ballast)
18
CF18DE/827
G24q-2
1200
1080
149
10000
X
Double Tube (4-Pin G24q-3 Base for Electronic Ballast)
26
CF26DE/827
G24q-3
1800
18
CF18T/827
GX24d-2
1200
1620
167
10000
X
Double Tube
Triple Tube (2-Pin GX24d-2 Base)
1080
123
10000
X
50
X
50
Triple Tube (2-Pin GX24d-3 Base)
26
CF26T/827
GX24d-3
1800
1620
139
10000
Triple Tube (4-Pin GX24q-1 Base for Electronic Ballast)
13
CF13TE/827
GX24q-1
900
810
113
10000
X
X
X
X
50
Triple Tube (4-Pin GX24q-3 Base for Electronic Ballast)
26
CF26TE/827
G24q-3
1800
1620
175
10000
X
X
X
X
50
32
CF32TE/827
GX24q-3
2400
2160
149
10000
X
X
X
X
50
X
X
X
Triple Tube (4-Pin GX24q-4 Base for Electronic Ballast)
42
CF42TE/827
GX24q-4
3200
2880
172
10000
X
50
Triple Tube
• Specifications are subject to change without notice.
54
Energy Saving Brochure
High Intensity Discharge Lamps & Ballasts
HID
Quick Reference
Watts
Model #
Bulb
Base
ANSI
Burning
Position
200
MH200/BU/ED28/PS
ED28
MOG
M136/E
Base Up
200
MH200/C/BU/ED28/PS
ED28
MOG
M136/E
Base Up
Lumens
Initial
(Im)
Lumens
Mean
(Im)
MOL
(in)
LCL
(in)
Avg. Life
(hours)
Color
Temp
(K)
CRI
Lamp
Finish
Pkg.
Qty
15000
4200
60
Clear
12
15000
4000
65
Coated
12
4000
65
Clear
12
Pulse Start Metal Halide
250
M138/
MH250/U/ED28/PS
ED28
MOG
250
MH250/BU/ED28/PS
ED28
MOG
M138/E
Base Up
250
MH250/C/BU/ED28/PS
ED28
MOG
M138/E
Base Up
320
MH320/BU/ED28/PS
ED28
MOG
M132/E
320
MH320/C/BU/ED28/PS
ED28
MOG
350
MH350/BU/ED28/PS
ED28
350
MH350/C/BU/ED28/PS
ED28
400
Universal
21000
16800
8.31
5
20000
16000
8.31
5
21000V
20000V
15750
8.3
5
25000
20000
8.31
5
15000
4200
70
Clear
12
23000
19000
8.31
5
15000
4000
75
Coated
12
Base Up
34000
27200
8.31
5
15000
4200
70
Clear
12
M132/E
Base Up
32300
24500
8.31
5
20000
4000
75
Coated
12
MOG
M131/E
Base Up
37000
29600
8.31
5
20000
4200
70
Clear
12
MOG
M132/E
Base Up
35200
28200
8.31
5
20000
4000
75
Coated
12
4000
65
Clear
12
M157/E
MH400/U/ED28/PS
ED28
MOG
M135/M
Universal
400
MH400/BU/ED37/PS
ED37
MOG
M135/E
Base Up
400
MH400/C/BU/ED37/PS
ED37
MOG
M135/E
Base Up
400
MH400/HOR/ED28/PS
ED28
MOG
M135/E
750
MH750/BU/BT37/PS
BT37
MOG
M149/E
750
MH750/C/BU/BT37/PS
BT37
MOG
1000
MH1000/BU/BT37/PS
BT37
200
MP200/BU/ED28/PS
200
18900H
36000V
15000H
20000V
27000
11.5
7
44000
35200
11.5
7
20000
4200
70
Clear
12
4200
33600
11.5
7
20000
4000
75
Coated
12
Base Up
40000
32000
8.31
5
20000
4000
65
Clear
12
Base Up
80000
60000
11.5
7
16000
4000
60
Clear
12
M149/E
Base Up
75000
56000
11.5
7
16000
4000
60
Coated
12
MOG
M141/E
Base Up
110000
96000
11.5
7
10000+
4200
60
Clear
12
ED28
MOG (EX39)
M136/O
Base Up
20000
16000
8.31
5
15000
4200
60
Clear
12
MP200/C/BU/ED28/PS
ED28
MOG (EX39)
M136/O
Base Up
19000
15200
8.31
5
15000
4000
65
Clear
12
250
MP250/BU/ED28/PS
ED28
MOG (EX39)
M138/O
Base Up
23800
19000
8.31
5
15000
4200
70
Clear
12
250
MP250/C/BU/ED28/PS
ED28
MOG (EX39)
M138/O
Base Up
22600
18100
8.31
5
15000
4000
75
Coated
12
15000H
15000H
320
MP320/BU/ED28/PS
ED28
MOG (EX39)
M132/O
Base Up
32300
25800
8.31
5
20000+
4200
70
Clear
12
320
MP320/C/BU/ED28/PS
ED28
MOG (EX39)
M132/O
Base Up
30600
24500
8.31
5
20000+
4000
75
Coated
12
350
MP350/BU/ED28/PS
ED28
MOG (EX39)
M131/O
Base Up
35200
28200
8.31
5
20000+
4200
70
Clear
12
350
MP350/C/BU/ED28/PS
ED28
MOG (EX39)
M131/O
Base Up
33400
26700
8.31
5
20000+
4000
75
Coated
12
400
MP400/BU/ED37/PS
ED37
MOG (EX39)
M135/O
Base Up
42000
33600
11.5
7
20000+
4200
70
Clear
12
400
MP400/C/BU/ED37/PS
ED37
MOG (EX39)
M135/O
Base Up
40000
32000
11.5
7
20000+
4000
75
Coated
12
Pulse Start Metal Halide Ballasts
Model #
Description
M0320-71C-6E4-CK
PSMH Ballast, 320w, M132/M154, Quad, PS-CWA, Alum, Circle E, Oil Kit
M0320-71C-6E4-DK
PSMH Ballast, 320w, M132/M154, Quad, PS-CWA, Alum, Circle E, Dry Kit
M0350-71C-6E4-CK
PSMH Ballast, 350w, M131, Quad, PS-CWA, Circle E, Oil Kit
M0350-71C-6E4-DK
PSMH Ballast, 350w, M131, Quad, PS-CWA, Circle E, Oil Kit
M0400-71C-6E3-CK
PSMH Ballast, 400w, M128/M135/M155, Quad, PS-CWA, Alum, Circle E, Oil Kit
M0400-71C-6E3-DK
PSMH Ballast, 400w, M135/M155 Quad, PS-CWA, Circle E, Dry Kit
M0750-71C-612-CK
PSMH Ballast, 750w, M149, Quad, PS-CWA, Alum, Oil Kit
M1000-71C-613-CK
PSMH Ballast, 1000w, M141, Quad, PS-CWA, Aluminum Secondary, Oil Kit
Note:
Quad (71C) = 120, 208, 240, 277
5-Tap (81C) = 120, 208, 240, 277, 480
PS-CWA = Pulse Start Constant Wattage Autotransformer
WARNING: This lamp can cause serious skin burn and eye inflammation from short-wave radiation if outer envelope of the lamp is broken or punctured. Do not
use where people will remain for more than a few minutes unless adequate shielding or other safety precautions are used. Lamps that will automatically extinguish
when the outer envelope is broken or punctured are commercially available.
1
• Specifications are subject to change without notice.
55
Energy Saving Brochure
Self Ballasted CFL
Self Ballasted Compact Fluorescent Lamps
Quick Reference
Incandescent
Equivalent
(Watts)
Lumens
Color
Initial MOL Dia. Avg. Life Temp.
(lm)
(in) (in) (hours)
(K)
CRI
Power
Factor
Pkg.
Qty.
>80
>0.5
48
2700
>80
>0.5
48
4100
>80
>0.5
48
10,000
6500
>80
>0.5
48
4.33 2.05
10,000
4100
>80
>0.5
48
1250
5.24 2.05
10,000
2700
>80
>0.5
48
1600
5.04 2.36
10,000
2700
>80
>0.5
48
100
1600
4.33 2.44
10,000
4100
>80
>0.5
48
CF23MS/865
100
1600
4.33 2.44
10,000
6500
>80
>0.5
48
MED
CF30MS/827
120
1800
5.60 2.32
10,000
2700
>80
>0.5
48
MED
CF30MS/841
120
1800
5.60 2.32
10,000
4100
>80
>0.5
48
Watts
Bulb
Base
Model #
9
Mini Spiral
MED
CF9MS/827
40
500
3.58 1.65
10,000
2700
13
Mini Spiral
MED
CF13MS/827
60
900
4.41 1.97
10,000
13
Mini Spiral
MED
CF13MS/841
60
900
4.41 1.97
10,000
14
Mini Spiral
MED
CF14MS/865
60
900
4.06 1.65
19
Mini Spiral
MED
CF19MS/841
75
1200
20
Mini Spiral
MED
CF20MS/827
75
23
Mini Spiral
MED
CF23MS/827
100
23
Mini Spiral
MED
CF23MS/841
23
Mini Spiral
MED
30
Mini Spiral
30
Mini Spiral
Mini Spiral Self Ballasted Compact Fluorescent
Mini Spiral
Decorative
Globe
Reflector
Decorative Self Ballasted Compact Fluorescent
5
Torpedo
E12
CF5TC/M/827
15
160
4.41 1.60
8,000
2700
>80
>0.5
12/48
7
Torpedo
E12
CF7TC/M/827
25
350
4.41 1.60
8,000
2700
>80
>0.5
12/48
11
Globe (G25) MED
CF11G25/827
45
600
4.29 4.33
8,000
2700
>80
>0.5
12/48
15
Globe (G30) MED
CF15G30/827
60
800
5.04 3.74
8,000
2700
>80
>0.5
12/48
Globe Self Ballasted Compact Fluorescent
Reflector Self Ballasted Compact Fluorescent
15
R30
MED
CF15R30/841
65
750
5.47 3.70
8,000
4100
>80
>0.5
12
15
R30
MED
CF15R30/865
65
750
5.47 3.70
8,000
6500
>80
>0.5
12
15
R30
MED
CF15R30/850
65
750
5.47 3.70
8,000
5000
>80
>0.5
12
16
R30
MED
CF16R30/827
65
750
5.47 3.70
8,000
2700
>80
>0.5
12
20
R40
MED
CF20R40/827
70
900
5.91 4.69
8,000
2700
>80
>0.5
12
20
R40
MED
CF20R40/841
70
900
5.91 4.69
8,000
4100
>80
>0.5
12
20
R40
MED
CF20R40/850
70
900
5.91 4.69
8,000
5000
>80
>0.5
12
23
PAR38
MED CF23PAR38/827
85
1050
5.50 4.80
8,000
2700
>80
>0.5
12
23
PAR38
MED CF23PAR38/841
85
1050
5.50 4.80
8,000
4100
>80
>0.5
12
23
PAR38
MED CF23PAR38/865
85
1050
5.50 4.80
8,000
6500
>80
>0.5
12
23
PAR38
MED CF23PAR38/850
85
1050
5.50 4.80
8,000
5000
>80
>0.5
12
Did you know?
Energy Independence and Security Act of 2007
Incandescent phase out will begin in 2012 and continue as follows:
100w Incandescent - 1/1/2012
75w Incandescent - 1/1/2013
60w & 40w - 1/1/2014
• Specifications are subject to change without notice.
56
Energy Saving Brochure
Rebates
Rebate Information
With a push towards energy efficiency various utilities and government organizations offer
rebates to its customers when they switch to energy efficient products. Many of our products
meet these standards and would qualify for these products. Below you will find a list of
websites that offer databases for each state.
Database of State Incentives for Renewables and Efficiency
DSIRE is a comprehensive source of information on state, local, utility and federal incentives
and policies that promote renewable energy and energy efficiency. Established in 1995 and
funded by the U.S. Department of Energy, DSIRE is an ongoing project of the N.C. Solar
Center and the Interstate Renewable Energy Council.
Website: www.dsireusa.org
SpiraxSarco (Database)
State & Utility Energy Efficiency Incentive Programs & Rebates
Website: www.spiraxsarco.com
Howard Lighting Products has several lines that meet standards for energy efficiency
rebates when you switch from lighting systems that require more energy.
•
•
•
•
•
•
•
Linear Fluorescent Highbays
Fluorescent Strip Retrofit kits
Linear Fluorescent Strips
Linear Fluorescent Wraps
LED Roadway Cobraheads
LED Area Lighters
LED Canopy
• Specifications are subject to change without notice.
• Induction Lighting
• Energy Saving T8 Lamps
• Self-Ballasted Compact
Fluorescent Lamps
• High Efficiency Ballasts
• And more...
57
Energy Saving Brochure
Rebate Information
Rebates
Rebate Programs
State Program(s) only
Utility, local and/or non-profit program(s) only
State program(s) + utility, local and/or non-profit program(s)
Source: www.dsireusa.org / November 2011
50 States
+ DC & PR
offer rebates
for renewables
Rebates are offered by various states and utility companies. You can receive a rebate
per unit installed, plus additional savings throughout the year from energy savings.
Howard wants all of our customers to have opportunities to find out more about what
their states offer. We are constantly expanding our product offering and updating it, to
ensure you have access to products that will meet rebate requirements.
For more information visit: www.dsireusa.org
• Specifications are subject to change without notice.
58
Howard Lighting Overview
Howard Lighting Products offers a full line of fixtures,
ballasts and lamps to meet our customers’ needs.
Fixtures
High Intensity Discharge
Canopy Fixtures
Construction Lights
Dusk-to-Dawn
Flood Lights
Garage Lights
Inline Highbays
Inline Lowbays
Roadway Lighting
Sports Lighters
Wallpacks
• Specifications are subject to change without notice.
Linear Fluorescent
Highbays
Retrofit Strips
Vaporproof Highbays
Vaporproof Strips
Strips
Wraps
Incandescent
Motion Sensor Lighting
Quartz Flood
LED
Area Lighter
Canopy
Cobraheads
Exit/Emergency Lighting
Induction
Roadway Lighting
Flood Lighting
Canopy Lighting
Wallpacks
Garage Lighter
59
Howard Lighting Overview
Lighting solutions for every need...
Lamps
High Intensity Discharge
Metal Halide
High Pressure Sodium
Standby HPS
Mercury Vapor
Halogen
PAR
MR11 & MR16
JD, J, JC, & JCD Series
Circline Fluorescent
T9 Rapid Start
T5 Programmed Start
Compact Fluorescent
Single Tube (2 & 4 pin)
Double Tube (2 & 4 pin)
Triple Tube (2 & 4 pin)
Linear Fluorescent
T8 (17, 25, 32 & 40 watts)
T8 32 watt High Lumens
T8 Energy Saving (25, 28, & 30 watts)
T5 (14, 21, & 28 watts)
T5 High Output (24, 39, & 54 watts)
Self Ballasted Compact Fluorescent
Mini Spiral (9-30 watts)
Torpedo (5 & 7 watts)
Globe (11 & 15 watts)
“A” Shape
Reflector (15 & 20 watts; CF23PAR38)
Ballasts
Electronic Ballasts
F32T8 High Efficiency
2, 3, or 4 lamp (CEE listed)
Instant Start
Standard, Low, High BF
F32T8 Program Rapid Start (CEE Listed)
T5 Program Rapid Start
F96T8 Instant Start
T12 Rapid Start Slimline & High Output
Compact fluorescent
HID Ballast
Metal Halide
Pulse Start (Circle E)
High Pressure Sodium
Magnetic Fluorescent
Sign Ballasts
Emergency Ballasts
• Specifications are subject to change without notice.
60
Energy Saving Brochure
Combination Lamp/Ballast System Warranty
“Security Plus”
Howard Industries, Inc. – Lighting Products Division warrants
lamps installed on Howard electronic ballast to be free from
defects in material and workmanship and to operate from the
date of installation (or date of manufacture if installation date
is not known or available) for the time periods and subject
to the terms and conditions specified in the table below. If
lamps fail to operate for the warranty period, Howard Lighting
Products will provide a free replacement lamp (no labor
allowance). If a Howard electronic ballast fails to operate
within the warranty period, Howard Lighting Products will
provide a free replacement ballast and labor allowance in
accordance with our ballast warranty guide.
Electronic Ballast
Lamp
Ballast
Warranty
Lamp
Warranty
Standard Power
F17T8/xxx/ECO, F25T8/xxx/ECO, F30T8/8xx/ES/ECO,
F32T8/xxx/ECO, F32T8/8xx/HL/ECO, FB32T8/xxx/6/ECO
60 months
36 months1
Low Power
F17T8/xxx/ECO, F25T8/xxx/ECO, F30T8/8xx/ES/ECO,
F32T8/xxx/ECO, F32T8/8xx/HL/ECO, FB32T8/xxx/6/ECO
60 months
36 months1
High Power
F17T8/xxx/ECO, F25T8/xxx/ECO, F30T8/8xx/ES/ECO,
F32T8/xxx/ECO, F32T8/8xx/HL/ECO, FB32T8/xxx/6/ECO
60 months
36 months1
HE Standard Power
F17T8/xxx/ECO, F25T8/xxx/ECO, F28T8/8xx/ES/ECO,
F30T8/8xx/ES/ECO, F32T8/xxx/ECO, F32T8/8xx/HL/ECO,
FB28T8/8xx/ES/ECO, FB32T8/xxx/6/ECO
60 months
36 months1
HE Low Power
F17T8/xxx/ECO, F25T8/xxx/ECO, F28T8/8xx/ES/ECO,
F30T8/8xx/ES/ECO, F32T8/xxx/ECO, F32T8/8xx/HL/ECO,
FB28T8/8xx/ES/ECO, FB32T8/xxx/6/ECO
60 months
36 months1
T5HO
F54T5/8xx/HO
36 months @
<90°C case
36 months1
60 months @
<75°C case
36 months1
Note: Fluorescent lamp warranty periods are based on a 3 hour minimum cycle, unless otherwise noted, with a maximum of 4,000 hours per year. Other
operating cycles may affect the warranty period. The Howard lamp warranty can renew when the installation is group relamped. For more details contact
Howard Lighting Products.
1. Occupancy sensor application, 15 minute/start minimum, allowed with program start ballast
2. Maximum case temperature <70°C, for normal environmental operating conditions (40°C max., ambient) unless noted
Terms and Conditions
1.
2.
3.
4.
5.
6.
HOWARD Industries warrants the lamps to be free from defects in
material and workmanship, and warrants its ballasts as provided in
HOWARD’s current published ballast warranty, hereby made part of
this warranty.
Howard lamps and electronic ballast must be installed together
as a system. Lamps must be operated on ballasts indicated, within
the electrical values noted on HOWARD ballast labels, and with all
lamp and lighting equipment instructions and be operated within
the normal specified operating range of environmental conditions
for the systems. Ballasts and lamps must be installed and operated
in accordance with the latest National Electric Code, UL, and ANSI
specifications. Ballasts and lamps operated in any system, which
has been subjected to abnormal stresses, but not limited to, excess
temperatures or under or over voltage conditions are excluded from
coverage under this Warranty.
The installation must be registered with HOWARD Industries within
thirty (30) days from date of completion. HOWARD’s combination T8
Lamp/Ballast System Warranty (Security Plus) Registration Form must
be completed per instructions and installation acknowledged by
HOWARD Industries.
Replacement of Howard lamps with lamps from other manufacturers
will void the lamp portion of this warranty.
Replacement of Howard electronic ballast with any other ballast
manufacturer will void the entire warranty.
For ballast refer to HOWARD Industries current published ballast
warranty. HOWARD Industries will replace in-warranty failures by
furnishing lamps in kind.
• Specifications are subject to change without notice.
7.
Howard Industries reserves the right to examine all failed ballasts
and/or lamps and reserves the right to be the sole judge as to
whether any ballasts and/or lamps are defective and covered under
this warranty.
8.This Warranty shall be the sole remedy of the Customer and the
sole liability of HOWARD Industries to Customer. NO IMPLIED
WARRANTY OR MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE IS MADE OR IS TO BE IMPLIED. HOWARD
Industries will not under any circumstances whether as a result
of breach of contract, breach of warranty, tort, strict liability
or otherwise be liable for consequential, incidental, special or
exemplary damages including, but not limited to, loss of profits or
revenues, loss of use of ballasts or any other goods or associated
equipment or damages to any associated equipment, cost of capital,
cost of substitute products, facilities or services, down time costs, or
claims of claimant’s customers.
9.
After contacting Howard Lighting Products and receiving a return
authorization number, the user/customer shall promptly return the
product at the user/customer’s expense to Howard Lighting Products
after receiving instructions as to when and where to ship product.
Failure to follow this procedure shall void this warranty.
10. Refer to HOWARD Industries Ballast Limited Warranty for other
terms and conditions and limitations not otherwise superseded
in the foregoing HOWARD Lighting Products Combination T8
Lamp/Ballast System Warranty (Security Plus).
11. Subject to change without notice.
61
Energy Saving Brochure
HID Lamp Limited Warranty
Howard Industries, Inc. – Lighting Products Division (“Howard Lighting Products”) warrants HID lamps to
be free from defects in material and workmanship. Howard Lighting Products’ HID lamps with greater than
12,000 hours average rated life are warranted for a period of one year from date of purchase based on max
operation of 6,000 hours per year (minimum 10 hr/start for lamp). If lamps fail to operate for the warranty
period, Howard Lighting Products’ sole warranty obligation is to provide a free replacement lamp (no labor
allowance).
Terms and Conditions
1. Howard Lighting Products warrants the
lamps to be free from defects in material
and workmanship.
2. Howard Lighting Products’ HID lamps
must be operated on ballasts designed to
operate the lamps. The ballast should be
marked with the same ANSI lamp code
designation as the lamp. The electrical
values depicted on the HID ballast label,
as well as the lamp and lighting equipment
instructions must be adhered to. The
lamp must be operated within the normal
specified operating range, orientation,
and environmental conditions for the HID
system. Lamps operated in any system
that has been subjected to abnormal
stresses, such as, but not limited to,
excess temperatures, mechanical stresses,
excessive switching cycles or under or over
voltage conditions or on ballasts, control
gear, or electrical systems that are outside
of the defined ANSI parameters in the
appropriate ANSI standards are excluded
from coverage under this Warranty.
3. This warranty excludes any product
damaged from misuse, faulty installation,
inadequate maintenance, damage,
negligence, accident, or tampering.
4. Howard Lighting Products reserves the right
to examine all failed lamps and reserves
the right to be the sole judge as to whether
lamps are defective and covered under this
warranty.
5.This Warranty shall be the sole remedy
of the Customer and the sole liability of
Howard Lighting Products to Customer.
NO IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE IS MADE OR IS
TO BE IMPLIED. Howard Lighting Products
will not under any circumstances whether
as a result of breach of contract, breach of
warranty, tort, strict liability or otherwise be
liable for consequential, incidental, special
or exemplary damages including, but not
limited to, loss of profits or revenues, loss
of use of lamps or any other goods or
associated equipment or damages to any
associated equipment, cost of capital, cost
of substitute products, facilities or services,
down time costs, or claims of claimant’s
customers.
6. After contacting Howard Lighting Products
and receiving a return authorization number,
the user/customer shall promptly return the
product at the user/customer’s expense to
Howard Lighting Products after receiving
instructions as to when and where to ship
product. Failure to follow this procedure
shall void this warranty.
7. Howard Lighting Products reserves the
right to change the warranty period without
notice.
8. Lamps and applications that have average
rated life of 12,000 hours or less will be
warranted for 6 months from date of
purchase based on max operation of 4000
hours per year (minimum 10hr/start for
lamp). Lamps and applications with rated
average life of less than 7,000 hours are
excluded from this warranty.
• Specifications are subject to change without notice.
62
Energy Saving Brochure
Fixture Limited Warranty
To the original purchaser, Howard Industries, Inc. – Lighting Products Division (hereinafter “Howard
Lighting”) warrants its HID and fluorescent fixtures to be free from manufacturing defects for the period
of one (1) year from the shipment date from Howard Lighting’s factory or an authorized representative’s
warehouse. If at any time during the warranty period the HID or fluorescent fixture exhibits the appearance
of defect in material or workmanship, the purchaser must notify Howard Lighting’s customer support via
telephone, fax, or mail as noted below to qualify for a refund, repair, or replacement.
Howard Industries, Inc. – Lighting Products Division
P.O. Box 1590
Laurel, MS 39441
800.956.3456 or 601.422.0033
601.422.1652 (fax)
This limited warranty is null and void if the Howard Lighting HID and fluorescent fixtures have not been
properly stored, installed, operated, and maintained in accordance with the following:
•
•
•
•
•
The National Electric Code (NEC)
The Standards for Safety of Underwriters Laboratories, Inc. (UL)
The Standards for the American National Standards Institute (ANSI)
The specific instructions provided by Howard Lighting for the installation of the product(s)
Accepted industry practices
Under the terms of this limited warranty, purchaser also agrees to make defective lighting products
available (upon request) to Howard Lighting or an authorized representative of Howard Lighting for review,
inspection, and/or analysis with the express understanding of the following:
•
•
•
•
•
Refunds, repairs, or replacement will be at the sole discretion of Howard Lighting.
Reimbursement for any field labor and/or service charges must be pre-approved in writing by
Howard Lighting.
The purchaser must obtain written approval from Howard Lighting prior to returning any defective
product. With this approval, the purchaser will be reimbursed for any reasonable shipping costs.
Certain lamps having a published rated life of less than one (1) year will not be covered under this
limited warranty.
Damage or defects arising from acts of God, fire, vandalism, civil disturbances, or war are not
covered.
The warranties set forth herein are in lieu of any and all other warranties expressed or implied including
the warranties of merchantability and fitness for a particular purpose. In no case shall Howard Lighting or
Howard Industries, Inc. be obligated or liable for any indirect, consequential, or incidental damages for
breach of this or any other warranty, expressed or implied, whatsoever.
• Specifications are subject to change without notice.
63
Energy Saving Brochure
Howard Corporate Headquarters
Howard Industries’ corporate headquarters
and computer and medical cart manufacturing
facilities are nestled within the 504-acre
Howard Technology Park.
Building highlights:
• 60,000 sq ft of office space
• 72,000 sq ft of manufacturing space
• 3,200 sq ft bridge way connecting
offices to manufacturing facility
Power Solutions
Technology Solutions
Lighting Products
Transportation
Howard Power Solutions, originally known as Howard Industries, was founded in
1968 by Billy W. Howard, Sr. Over the past four decades, this company has grown
to be the nation’s leading manufacturer of distribution transformers, with over 7
million transformers in service throughout the United States and abroad. Located
in Laurel, MS, this facility has 2 million square feet, making it the largest transformer plant in the world. Our newest transformer division, Howard Substation Transformers, located near corporate headquarters, began manufacturing operations in
April 2005 producing power transformers with higher KVA and voltage ratings.
Our new Corporate Headquarters is also home to our technology division,
Howard Technology Solutions, and its medical division, Howard Medical. These
2 divisions bring to market cutting-edge, high-quality technology and medical
equipment. Whether selling Howard-manufactured products such as desktops,
notebooks, servers, and medical carts or partnering with other industry-leading
companies to provide over 190,000 products, one can be sure when you buy from
Howard, the needed equipment is available at affordable prices.
Howard Lighting Products markets a vast portfolio including electronic fluorescent
ballasts, magnetic HID ballasts, as well as T5/T8 and compact fluorescent lamps,
HID lamps and halogen lamps; as well as a full line of HID, linear fluorescent, LED,
and Induction fixtures. This division continually updates their product lines to
meet the ever-changing demands of the market.
Howard Transportation, a wholly-owned subsidiary of Howard Industries, Inc.,
operates a full-load, long-haul, flat-bed common carrier truck line and brokerage
firm that transports commodities and industrial goods throughout the continental
United States. Initially started to transport Howard Power Solutions’ raw materials
and finished products, this division today consists of over 200 trucks with regional
terminal facilities also located in West Virginia and North Carolina.
• Specifications are subject to change without notice.
TM
580 Eastview Drive Laurel, MS 39443 • P.O. Box 1590 Laurel, MS 39441
800.956.3456 general • 601.422.0033 • 601.422.1652 fax
www.HowardLightingProducts.com
Revision Date: 3/26/2012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement