advertisement
Off Light (orange†)
Off = System armed
†Some models feature a red LED instead of an orange one
AC Light (yellow)
StayD Light (green)
K32 - User’s Quick Reference Guide
K
EYPAD
O
VERVIEW
Partition 1 Status Partition 2 Status
Arm (red), Sleep (yel), Stay (grn):
On = Partition armed
Off = Partition disarmed
Flash = Exit Delay
Fast Flash* = Exit Delay (final 10 sec.)
Fast Flash* = Partition in alarm
* Audible Indicators:
Continuous beep = Alarm
Variable beep = Fire alarm
Intermittent beep = Beginning of exit
Fast beep delay
= Final 10 sec. of exit delay
= Press once + [
MASTER
CODE
] for Quick Menu
Programming)
Zone Display:
The numbers [1] to [32] correspond to zones 1 to 32 respectively. Open or entry delay zones are illuminated, and flash in alarm.
K32 Keypad
[
TBL
] Trouble display
ON = Trouble(s) occurring
[
MEM
] Alarm memory display
ON = Alarm(s) occurred
[
BYP
] Bypass programming
ON = Zone(s) bypassed
TO ARM
WHEN LEAVING
...
A
RMING AND
D
ISARMING
TO ARM
WHEN STAYING
...
To Regular Arm:
1. Close all zones in the desired partition.
2. Enter your [ ACCESS CODE ]** or [ ARM ] +
[
ACCESS CODE
]
To Stay Arm:
1. Press the [
STAY
] key.
2. Enter your [ ACCESS CODE ]**.
To Sleep Arm:
1. Press the [
SLEEP
] key.
2. Enter your [ ACCESS CODE ]**
To Disarm:
[
OFF
] + [
ACCESS CODE
]**
** If needed, press button(s) corresponding to desired partition(s). For two partitions, press the other key after the confirmation beep.
P
ANIC
A
LARMS
To send a silent or audible alarm to your
Security Company, press and hold one of the button combinations listed for 3 seconds.
Panic Alarm Type Button Combinations
Police
Medical
Fire
Press [1] & [3]
Press [4] & [6]
Press [7] & [9]
\
A
LARM
M
EMORY
D
ISPLAY
To view the alarms that occurred during the last armed period:
1. Disarm the system.
2. Press the [ MEM ] key.
3. The corresponding zone numbers that were in alarm the last time the system was armed will illuminate.
4. Press the [ CLEAR ] key to exit.
T
ROUBLE
D
ISPLAY
When a trouble condition occurs, the [ TBL ] key will illuminate.
1. Press the [ TBL ] key. The key will flash and number(s) corresponding to the trouble(s) will illuminate.
2. Read the corresponding explanation of the trouble from the trouble list in the control panel User Guide. If no repair instructions are given, call your security company for repairs.
3. Press the [ CLEAR ] key to exit.
K
EYPAD
S
ETTINGS
To mute the keypad:
Press and hold the [ CLEAR ] key for 6 seconds to enable or disable Keypad
Muting.
To modify the backlight:
1. Press and hold the [
] key for 3 seconds.
2. The [ MEM ] key will illuminate.
3. Press the [
] key to set the desired backlight level.
4. Press [ CLEAR ] or [ ENTER ] to exit.
B
YPASS
P
ROGRAMMING
Bypassed zones remained unarmed when the partition is armed.
1. Press the [ BYP ] key.
2. Enter your [
ACCESS CODE
]**.
3. The corresponding LED of all open zones will illuminate. Select the zone(s) you want to bypass by entering the twodigit zone number (i.e. zone 3 = 03). The corresponding zone LED will flash.
4. Press the [ ENTER ] key to save and exit.
C
HIME
P
ROGRAMMING
A Chime Enabled zone will advise you every time it is opened by causing your keypad to beep.
1. Press & hold the [
] key for 3 seconds.
2. Select the zones you want to Chime by entering the two-digit zone number. The corresponding zone LED will flash. For example, to chime zone 2 enter [0] then
[2]. The keypad will automatically save once the 2-digit zone number is entered.
3. Press the [ ENTER ] key to exit.
© Paradox Security Systems Ltd., 2005-2010. Magellan is a trademark or registered trademark of Paradox
Security Systems Ltd. and its affiliates in Canada, the
United States and/or other countries. All rights reserved.
PARADOX.COM
PRINTED IN CANADA 01/2010 K32-EQ00
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project