FEATURES TYPICAL SPECIFICATIONS

FEATURES TYPICAL SPECIFICATIONS
Project/Location:
Contractor:
LDE Series
Date:
Die-Cast Aluminum Pictogram
Edge-Lit Sign
FEATURES
•Self-Powered models provide minimum two hours of emergency lighting
•Die-Cast Aluminum construction
•Modular design offers great choice of architectural profiles
•Universal Die-Cast back-box for surface or semi-recessed mounting on
ceilings or walls
•LED strip module can be rotated in the unit for either wall or ceiling mount
•Flat Die-Cast trim plate and galvanized steel back-box for recessed
ceiling mount
•Clear acrylic panel with pictogram legend
•Comes standard with double-face panels for use in single-face or
double-face applications
•White LED light source
•Meets or exceeds CSA 22.2 No.141-10 standard for pictogram Exit Signs
•Universal AC input: two-wire 120 to 347VAC; universal DC input:
two-wire 6 to 24VDC
•Energy efficient – consumes less than 2.5 Watts
Prepared by:
Lumacell Model:
TYPICAL SPECIFICATIONS
Supply and install the Lumacell® LDE Series of Die-Cast pictogram
Edge-Lit signs.
When specified for surface mount, the unit shall come standard with a trim
plate, trim ring, back box and canopy made of Die-Cast aluminum with
profile and allow for wall- or ceilingfinish. The trim plate shall have a
mount installation. The trim ring shall allow for semi-recessed installation in
walls or ceilings with cavity. The canopy shall allow for wall, end, or ceiling
mount.
When specified for recessed ceiling-mount, the unit shall come standard with
finish, a back box of
a flat trim plate of Die-Cast aluminum with
galvanized steel, and a hardware kit for back box installation between ceiling
joists. The back box shall be provided with conduit knock-outs at the top,
back and end.
All Edge-Lit units shall have the trim plate snap and lock in the housing with
torsion spring retainers, thereby eliminating any visible screws or hardware.
The legend shall be printed on a clear acrylic panel. The panel shall come
standard with double-face legend, for single-face and double-face applications.
The light source shall be long-life white light-emitting diodes (LED) and shall
provide even illumination in normal and emergency operation. The Edge-Lit
sign shall operate with universal 2-wire AC input voltage of 120 to 347VAC
at less than 2.5W and universal 2-wire DC input voltage from 6 to 24VDC
at less than 2.5W. The Edge-Lit sign in a Self-Powered configuration shall
use a sealed Nickel-Cadmium battery of 2.4V nominal voltage and shall stay
illuminated during emergency operation for at least two hours upon AC failure.
When specified, the Self-Powered unit shall include non-audible auto-test
functions, managed by a micro-controller: it shall execute automatic tests for
5 minutes every 30 days, 30 minutes every 60 days and two hours annually.
When a fault is detected a red flashing LED shall identify the failure type:
battery, charger circuitry, or LED lamps.
The Edge-Lit sign shall be listed CSA 22.2 No.141-10.
.
The equipment shall be Lumacell® Model:
POWER CONSUMPTION
MODEL
14
AC SPECS
DC SPECS
AC-only
120/347VAC
Less than 2.5 W
-
-
AC/DC standard
120/347VAC
Less than 2.5 W
6 to 24VDC
Less than 2.5 W
Self-Powered
120/347VAC
Less than 3.5 W
Nickel-Cadmium battery
Minimum 90 minutes
Self-Powered diagnostic
120/347VAC
Less than 3.5 W
Nickel-Cadmium battery
Minimum 90 minutes
www.lumacell.com
LDE Series
Die-Cast Aluminum Pictogram
Edge-Lit Sign
DIMENSIONS
Dimensions are approximate and subject to change.
163/4” [42.7 cm]
16” [40.8 cm]
2 ” [6.4 cm]
111/2” [29.2 cm]
27/8” [7.4 cm]
113/4” [29.8 cm]
8” [20.3 cm]
1/2
67/8” [17.3 cm]
61/4” [15.7 cm]
93/4” [24.7 cm]
45/8” [11.6 cm]
4” [10.0 cm]
11/8” [2.9 cm]
4” [10.0 cm]
115/8” [29.6 cm]
45/8” [11.6 cm]
21/2” [6.4 cm]
27/8” [7.4 cm]
31/4” [8.3 cm]
13” [32.9 cm]
163/4” [42.7 cm]
111/2” [29.2 cm]
27/8” [7.4 cm]
8” [20.3 cm]
67/8” [17.3 cm]
113/4” [29.8 cm]
93/4” [24.7 cm]
61/4” [15.7 cm]
11/8” [2.9 cm]
45/8” [11.6 cm]
4” [10.0 cm]
21/2” [6.4 cm]
16” [40.8 cm]
4” [10.0 cm]
4 ” [11.6 cm]
5/8
115/8” [29.6 cm]
21/2” [6.4 cm]
27/8” [7.4 cm]
31/4” [8.3 cm]
13” [32.9 cm]
37/8” [9.9 cm]
15” [38.1 cm]
37/8” [9.9 cm]
6” [17.8 cm]
67/8” [17.4 cm]
31/4” [8.3 cm]
127/8” [32.9 cm]
ORDERING INFORMATION
SERIES
LDE= Die-Cast Edge-Lit
pictogram sign
FACES/ARROW
1= one face, no arrows
L= arrow left, single face
R= arrow right, single face
2= two face, no arrows
A= universal two, arrow left
or right
COLOUR
A= brushed aluminum
B= black
C= chrome
P= polished bross
W= factory white
Z= bronze
TRIM
A= angular
C= circular
F= flat (fully recessed)
VOLTAGE
AC= AC only, 120 to 347VAC
ACD= 120 to 347VAC, 6 to 24VDC option
SP= Self-Powered, 120 to 347VAC
SD= Self-Powered (non-audible), 120/347VAC
SD2= Self-Powered (non-audible), 120/277VAC
U48= 120 to 347VAC, 48VDC
NEX= NEXUS® system interface**
NEXRF= wireless NEXUS® system interface**
** Consult your sales representative for options available with NEXUS® system.
EXAMPLE: LDE2ACSP
*Note: Contrary to Exit Signs, the unit is not available in double arrow configuration.
www.lumacell.com
15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement