- No category
advertisement
QUICK START GUIDE
Focus TAG
Works with FOCUS86 Wi-Fi
®
Home Video Camera
The features described in this guide are subject to modifications without prior notice.
Thank you for purchasing your new Motorola Focus TAG.
Focus TAG is a BLE device that works as a motion sensor and a presence detector. It is designed as an external sensor for FOCUS86 Wi-Fi
®
Home
Video Camera.
Please keep your original dated sales receipt for your records. Registration is not required for warranty coverage.
For product related questions, please call:
US and Canada 1-888-331-3383
Email: [email protected]
On the Web: www.motorolahome.com
We recommend you to visit our website www.motorolahome.com/help to get the latest User Guide. The User Guide contains General Information and detailed Warranty Information.
1. Overview of Focus TAG
PAIR button
LED light
LED light
PAIR button
• Press and hold for 5 seconds to pair Focus TAG with your Android™ or iOS device.
• Flashes in blue when Focus TAG is in registration mode.
2. Install Battery
1.
Remove the battery cover using a flathead screwdriver.
2.
Insert the screwdriver into the slot on the back of Focus TAG and use the screwdriver as a lever to pry open the back cover as shown below.
3.
Insert the battery (model: CR2032) with positive pole (+) facing upwards into the battery compartment. back cover
4.
Position the back cover over the battery compartment and press down around the edges until you hear it click into its place.
5.
Focus TAG powers on automatically when the battery is installed correctly.
3. Power On
Focus TAG powers on automatically when the battery is installed correctly.
4. Install Hubble for Motorola Monitors App
Download the Hubble for Motorola Monitors App from the App Store for iOS devices or from the Google Play
TM
Store for Android
TM
devices.
5. Add Focus TAG as a Motion Sensor or Presence Detector
1.
Run Hubble for Motorola Monitors App on your Android™ or iOS device.
2.
Press and hold the PAIR button on Focus TAG for 5 seconds to begin
pairing it with your Android™ or iOS device. (see 2. Overview of
Focus TAG for the location of the PAIR button)
3.
Select your FOCUS86 Camera.
4.
Follow the in-app instructions to set up Focus TAG as a motion sensor or presence detector.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license.
Apple logo and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play, Android, and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance. All other trademarks are the property of their respective owners. © 2015 Motorola Mobility LLC. All rights reserved.
US_EN Version 1.0
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project