Lolux ™ Dome Indoor/Outdoor High-Resolution Colour Cameras with Direct Drive Motor for Quick, Silent, and Accurate Operation 540 TVL TK-C686WPE/TK-C685WPE 0.03°�°� 36x/27x 36x/27x36x/27x 0.03 36x/27x Super Optical 36x/27x Optical 36x/27x Optical Zoom Optical Zoom Zoom Optical Zoom °� Fast/Slow 0.03°�°� 0.03 Fast/SlowFast/S °� 0.03 0.03 Fast/Slow Variable Pan Fast/Slow Super Variable PanFast/S Super Variable Accuracy Optical Super Zoom Accuracy Zoom Accuracy Super Accuracy Tilt Speed Tilt Speed Super Accuracy Tilt Spe Pan Variable Variable Pan Variable Accuracy Tilt Speed Tilt Spe Tilt Speed * 0.04lx* 0.04lx*0.04lx Easy Easy Eas Silent Silent Silent Eas * Super * 0.04lx Super *0.04lx 0.04lx Super Operation Silent Operation Silent Easy Easy Operation Silent Installation Installation Installa Super LoLux LoLux Super Super LoLux Operation Operation Operation TM TM LoLuxTM LoLuxTM TM TM Installation Installa Installation LoLux at B&W mode Direct Drive - Direct Drive Motor for Extra Precision and Silence • Super Accurate Positioning (±0.03° precision) • Super Fast & Super Slow Pan/ Tilt (500°/sec to 0.04°/ sec variable) • Super Silent Operation (Ideal for hospitals, libraries, and museums) - High-Resolution of 540 TV Lines 1/4” IT CCD with approx. 440,000 effective pixels captures precise images for high-quality monitoring - Day/Night Function with IR Cut Filter Automatic switching between day and night modes for reliable round-the-clock surveillance - Effective Backlight Compensation ExDR (by dual shutter) Function allows secured monitoring even in backlit situations - Super LoLuxTM Sensitivity 0.04 lx at B&W mode (25% video level, F1.6, AGC SUPER) 0.5 lx at colour mode (25% video level, F1.6, AGC SUPER) - Easy Installation One-touch lock mechanism for quick and easy installation and maintenance - Stylish Design and Colour Stylish dome camera neatly matches the environment - Dust- and Waterproof Design (TK-C686WPE/C685WPE) IP66-standard robust design suitable for outdoor monitoring system A Choice of Cameras Built to the Highest Specifications, Worthy of Any Surveillance System JVC’s Direct Drive Motor-equipped Dome Camera series has just been powered up. You can now select the best choice for your usage environment and budget, based on factors like zoom magnification needs and indoor/outdoor usage capabilities. But regardless of your choice, you can always count on JVC’s origi- nally developed Direct Drive Motor mechanism, high and lowspeed Pan/Tilt, superior precision and low noise for usability that’s a notch above the competition. And with a host of valuable functions at your fingertips, JVC’s new line up is more than ready to add new quality and convenience to your surveillance system. TK-C686WPE/TK-C685WPE TK-C686E/TK-C685E Indoor Model Outdoor Model Internal Dome Design External Dome Design Normally recessed into a false ceiling to provide minimal intrusion in any indoor location. Or, when surface-mounted the sleek design will let it blend into a variety of environments for inconspicuously effective surveillance. Made to IP66 standards, the housing provides complete protection from the elements but still provides crisp, clear images of its surroundings. Materials used will provide long-lasting service over years of harsh weather conditions. n Quick Comparison TK-C686E TK-C685E TK-C686WPETK-C685WPE Type Zoom Ratio Image Stabiliser Dust & Waterproof • • Direct Drive Motor Super LoLuxTM • • • • • • • • Indoor Indoor Outdoor Outdoor 36x Optical 27x Optical 36x Optical 27x Optical •• Direct Drive Motor – Breakthrough mechanism for more accurate and reliable camera movement The TK-C686/C685 Series incorporates a newly-developed Direct Drive Motor for Pan/Tilt operation. Instead of a conventional belt-type mechanism, it can provide monitoring with more precision, less operation noise, and superior durability. l See what’s good about Direct Drive Motor Mechanism! Super Fast (500°/sec) & Super Slow (0.04°/sec) Pan/Tilt Performance With a maximum 500°/sec. movement, you won’t miss a crucial scene. Even when pan/tilting manually, the mechanism is very responsive allowing stress-free joystick operation. Furthermore, extremely slow movement of 0.04°/sec. is possible, so you can take a good look at the scene even at high zoom rates, thanks to the slow and smooth movement. Super Silent Operation of 35dB or lower The mechanical noises of a belt-driven PTZ camera are absent. In fact, the operating noise as measured from a mere 1m away from our camera amounted to a quiet approx. 35dB. This makes it ideal for usage in locations where noise should be avoided, such as hospitals, museums, libraries and offices. Super Accuracy of ±0.03° for Preset Positions With an accuracy of 0.03°, it can precisely maintain preset camera positions even after frequent panning and tilting, which becomes especially important at high zoom magnifications. With an ordinary camera (with low accuracy such as 0.1°), the camera position gradually shifts each time the camera is panned or tilted, so that after frequent usage the position becomes totally different from the initial correct position. n Conventional belt-type unit with low accuracy Position A Back to Position A Camera positions rotate as preset B C D E Becomes different from initial position. Super Durability and Reliability n Direct Drive Motor with 0.03° accuracy Position A Back to Position A Camera positions rotate as preset B C D E Maintains almost the same position. Images are explanatory purposes and are not actual images attained using this product. Direct Drive is a very simple mechanism. The number of parts in the Direct Drive is far less than that of the belt-driven PTZ, so one can expect the durability to be approximately 160%. And since the Direct Drive is completely belt-less, there is no possibility of malfunction due to belts that will break on a regular basis. The simplified mechanism greatly reduces the chances of malfunction and increases reliability. 36x Optical Zoom for Incredible Magnification (TK-C686E/C686WPE) The TK-C686E and TK-C686WPE come with a powerful 36x optical zoom to provide incredible magnification with full optical quality. It is powerful enough to allow identification of a face or a license plate located far away. (27x zoom for the TK-C685E/C685WPE) 36x Quick and Easy Installation and Maintenance Thanks to its “One-touch lock” mechanism, installation is extremely easy. Simply insert the camera unit to the bracket, and that’s all, greatly reducing time and cost for installation and maintenance. n TK-C686WPE/C685WPE (Eg.: Wall mount installation) n TK-C686E/C685E (Eg.: Ceiling recessed installation) 1 Install the ceiling bracket (option) on the ceiling, and screw the camera’s ceiling mount section onto it at 3 points. 2 Push the camera straight up into the ceiling mount section. If done correctly, you will hear a click as it locks into place. 3 Cover the unit with the Ceiling Panel (option), and you’re finished. 4 1 To remove, press the Lock buttons located on both sides of the camera to release the locks, then pull the camera straight down. 2 Insert the camera’s mounting hole over the wall’s anchor bolt, and tighten the nut to affix. (Bolt in 4 locations to secure the camera.) Run the cable through the inside of the arm and then cap it, and you’re finished. Proven Reliability with JVC Standard Assurance of reliability comes not only from JVC’s long years of experience and solid track record, but also by inspecting every single product at our QC facility based on our strict quality standards. For all models, this includes grueling tests for Pan/Tilt and Zoom in/out movement accuracy, and for outdoor models, severe tests against water, dust, and shocks are applied to ensure stable performance that conforms to the IP66 Standard. n Tests like these are applied to each and every model. Count on durability. 2 million times of zooming 4 million times of focusing Numbers are guides and vary depending on the usage conditions. 5 million times of panning l Full-featured intelligent security camera for a variety of environments ExDR (Extended Dynamic Range) with Dual Shutter Electronic Sense-Up for Low-Light Situations Bright areas of a scene are shot with a high-speed shutter while dark areas receive normal exposure. Both sets of data are then combined to create a single, well-balanced image with light and dark areas perfectly exposed. Electronic sense up function provides higher sensitivity level for monitoring in dark locations by lengthening the exposure time automatically. CRT/LCD Selectable Display Mode By choosing the display mode that matches the monitor being used, you’ll get images with optimal brightness regardless of whether you are using a CRT or LCD monitor. + Bright outside area shot with a high speed shutter = Image Stabiliser (TK-C686E/C686WPE) Well-balanced image with ExDR Dark indoor area shot with a normal speed shutter Even in cases where the camera is shook by the wind or vibrations coming from its surroundings, the Image Stabiliser function helps reduce image blur. This function is invaluable in outdoor setups, such as Pendant mount style installations which are especially susceptible to the effects of vibrations. Motion Detection and Tracking IR Cut Filter for Round-the-Clock Surveillance This function outputs an alarm whenever movement is detected within a pre-specified area of the image. It can also be used to automatically track a moving object or person for about 30 seconds. The IR cut filter automatically switches between ON and OFF according to the level of ambient light. In daytime it outputs a high-quality colour image, and at night the filter mechanism removes the IR filter to output black-and-white images with greater sensitivity. (When utilising IR lamps, an external trigger for night mode is recommended.) Privacy Mask for Protecting Intrusive Monitoring (The red frame of the detected subject is shown only in Demonstration Mode.) Up to 8 masked areas can be set as hidden areas to protect subjects from invasion of their privacy. Without Privacy mask With Privacy mask n Multi-Drop Communication System with RM-P2580E n Optional Accessories For TK-C686E/C685E • WB-S682U Wall mount TK-C686/C685 Series • WB-S685U Ceiling recessed bracket 24V AC 24V AC MONITOR TM-A170 24V AC DVR VR-509E For TK-C686WPE/C685WPE • EB-S684U Outdoor pendant mount pole RM-P2580E Product name Qty Model name 8 TK-C686/C685PTZ camera RM-P2580E Remote Control Unit1 VR-509E DVR1 TM-A170 Monitor for DVR 1 RM-P2580E Remote Control Unit • WB-S681U Pendant mount pole n Dimensions 140 120 ° ° ° .5 .5 72 SR 72 SR 90.5 385 201 201 199 880 0 880 0 20 20 90.5 199 Insta llatioInstallati n ho o le n hole 152 126 120 120 120 ° 160 152 126 140 176 213 160 Camera unit Screw hole Camera unit Screw hole diameter diameter 176 213 160 160 TK-C686WPE/C685WPE Camera front Camera front 385 TK-C686E/C685E Screw holes Screw holes 350 23 350 260 260 23 Position to pull outtocables Position pull out cables 22.5 22.5 Unit: mm Unit: mm n Specifications TK-C686E TK-C685E TK-C686WPE TK-C685WPE CAMERA Image device 1/4” Interline CCD Number of effective pixels 440,000 (752H x 582V) Sync system Internal, Line lock Scanning system Interlace Scanning frequency 15.625kHz (H), 50.0Hz (V) Video output Composite video signal: 1.0V (p-p), 75ohms Video S/N ratio 50dB (Typ. AGC OFF), 48dB (Min. AGC OFF) Horizontal resolution 540 TV lines (Typ.), 520 TV lines (Min.) Minimum illumination (typical) Colour mode:0.5lx (25% video level, F1.6, AGC SUPER) 1.0lx (50% video level, F1.6, AGC SUPER) B&W mode: 0.04lx (25% video level, F1.6, AGC SUPER) 0.08lx (50% video level, F1.6, AGC SUPER Iris control Auto/Manual White balance ATW (Narrow/Wide), AWC ATW Wide colour temperature range: 2300K to 10000K ATW Narrow colour temperature range: 3200K to 8000K Extended dynamic range On/Off AES 1/50 to 1/10000 (8 steps) Backlight compensation 4 photometry areas selectable AGCOFF/MID/HIGH/SUPER Sensitivity up Off/x2, 4, 8, 16, 32, 64, 128 Day/Night IR Cut Filter On/Off Auto tracking On/Off Private mask 8 positions in total Image Stabiliser On/Off – On/Off – Display mode CRT/LCD1/LCD2 LENS Zoom ratio 36x optical (32x digital) 27x optical (32x digital) 36x optical (32x digital) 27x optical (32x digital) Focal length f=3.43mm to 122mm f=3.43mm to 92.6mm f=3.43mm to 122mm f=3.43mm to 92.6mm Max. aperture ratio F:1.6 (f=3.43mm) to F:1.6 (f=3.43mm) to F:1.6 (f=3.43mm) to F:1.6 (f=3.43mm) to F:4.5 (f=122mm) F:3.5 (f=92.6mm) F:4.5 (f=122mm) F:3.5 (f=92.6mm) Max. close-range Approx. 1.8m (TELE), Approx. 0.6m (WIDE) MECHANISM (PTZ) Panning 360° endless type Tilting -5° to 185° Tilting speed Approx. 0.04°/sec to 500°/sec Control protocol JVC, Pelco P/D GENERAL Preset position 256 Alarm In x 6 / Out x 2 Power supply 24V AC (50Hz/60Hz) Power consumption 1.3A 2.7A Operating temperature range -10°C to 50°C, 0°C to 40°C (recommended) -40°C to 50°C (always power on), -30°C to 40°C (recommended) Dust and water protection – IP66 Dimensions (WxHxD) ø160mm x 201mm (H) ø260mm (incl. housing) x 385mm (H: incl. bracket) x 350mm (D: incl. bracket) Weight 1.9kg 5.5kg Optional accessories Wall mount bracket, Ceiling recessed bracket, Pendant mount pole Outdoor pendant mount pole Copyright © 2008, Victor Company of Japan, Limited. All Rights Reserved. DISTRIBUTED BY Design and specifications subject to change without notice. Printed in Japan KCN-1853 TK-C686E/685E /TK-C686WPE/C685WPE “JVC” is the trademark or registered trademark of Victor Company of Japan, Limited.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project