Yamaha RX-A810 Owner`s manual

Yamaha RX-A810 Owner`s manual
AV Receiver
Owner’s Manual
Be sure to read “Safety Brochure” (supplied booklet) before using this unit.
English for Europe
En
1
CONTENTS
9 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . 35
FEATURES
What you can do with this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10 Optimizing the speaker settings automatically (YPAO) . . . . . . . . 36
Measuring at one listening position (single measure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Measuring at multiple listening positions (multi measure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Checking the measurement results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Reloading the previous YPAO adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Front display (indicators) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
SETUP
PLAYBACK
Basic playback procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting an HDMI output jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
1 Placing speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting the input source and favorite settings at once (SCENE) . . 44
2 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Configuring scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Connecting front speakers that support bi-amp connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Selecting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Input/output jacks and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Enjoying sound field effects (CINEMA DSP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
3 Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Enjoying pure high fidelity sound (Pure Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
4 Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Connecting video devices (BD/DVD players, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Connecting audio devices (CD players, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Connecting to the jacks on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
5 Connecting the FM/AM antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6 Connecting to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
7 Connecting other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Connecting an external power amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Connecting video/audio recording devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Enjoying unprocessed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . 49
Enjoying surround sound with headphones (SILENT CINEMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Listening to FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Registering favorite radio stations (preset) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Radio Data System tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Operating the radio on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Playing back iPod music/videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Playback of iPod contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Connecting a device compatible with SCENE link playback (remote connection) . . . . . . . . . . . . . . . . . . .33
Playing back music via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Connecting a device compatible with the trigger function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Connecting a Bluetooth receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
8 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Pairing Bluetooth components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Establishing a wireless connection and playing back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
En
2
Playing back music stored on a USB storage device . . . . . . . . . . . . . . 61
Viewing information about this unit (Information menu) . . . . . . . . 101
Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Types of information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Configuring the system settings (ADVANCED SETUP menu) . . . . . 103
Playing back music stored on PCs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
ADVANCED SETUP menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Changing the speaker impedance setting (SP IMP.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Playback of PC music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Selecting the remote control ID (REMOTE ID) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Switching the video signal type (TV FORMAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Removing the limitation on HDMI video output (MON.CHK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Playing back music in multiple rooms (multi-zone) . . . . . . . . . . . . . . . 69
Restoring the default settings (INIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Preparing for Zone2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
Updating the firmware (UPDATE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Controlling Zone2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Checking the firmware version (VERSION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Useful functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Controlling external devices with the remote control . . . . . . . . . . . 106
Registering favorite items (shortcut) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Setting the remote control code for a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Controlling this unit from the web browser (web control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Setting the remote control codes for playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Viewing the current status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Programming from other remote controls (learning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Configuring settings in accordance with a playback source (Option menu) . . . 77
Resetting remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Option menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Updating the firmware of this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
CONFIGURATIONS
APPENDIX
Configuring input sources (Input menu) . . . . . . . . . . . . . . . . . . . . . . . . . 80
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Input menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Configuring the SCENE function (Scene menu) . . . . . . . . . . . . . . . . . . . 83
Power and system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Scene menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Configuring sound programs/surround decoders (Sound Program menu) . . . 85
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Sound Program menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . 88
Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Speaker (Manual Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
USB and network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Error indications on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Ideal speaker layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Multi Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Video signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
En
3
Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Reference diagram (rear panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
En
4
Accessories
Operating range of the remote control
Check that the following accessories are supplied with this product.
■ Remote control
• Aim the remote control directly at the remote control sensor on this unit during operation.
■ Batteries (AAA, R03, UM-4) (x 2)
Within 6 m
30°
30°
Insert into the remote control in the correct polarity (+/-)
■ YPAO microphone
■ Power cable
*The figure of the supplied power cable
differs depending on regions.
■ AM antenna
■ FM antenna
*The figure of the supplied FM antenna
differs depending on regions.
■ Easy Setup Guide
■ CD-ROM (Owner’s Manual)
• Some features are not available in certain regions.
• Design and specifications are subject to change in part as a result of improvements, etc. In case of
differences between the manual and product, the product has priority.
• This manual mainly explains operations using the supplied remote control.
• This manual describes both the “iPod” and “iPhone” as the “iPod”. “iPod” means both “iPod” and
“iPhone” unless the explanation describes exceptions.
■ Safety Brochure
• “
” indicates the cautions concerning operations or setup of the unit.
• “
” indicates the explanations for better use.
En
5
FEATURES
What you can do with this unit
Ready for any kind of contents
Network
iPod
p.54
p.64 to p.67
USB
p.59
p.61
Bluetooth
Supports 2 to 7.1 (plus presence) channel
speaker system. Allows you to enjoy favorite
acoustic spaces in various styles.
Automatically optimizing the speaker
p.36
settings to suit your room (YPAO)
Sound field reproductions like actual
p.46
movie theaters and concert halls from
stereo or multi-channel audio sources
(CINEMA DSP)
Enjoying compressed music with
p.49
enhanced sound (Compressed Music
Enhancer)
*Requires optional Bluetooth receiver for playback via Bluetooth
Network contents
USB device
Audio
via Bluetooth
Speakers
Audio
HDMI Control
iPod
Audio
HDMI Control
Video
Audio/Video
BD/DVD player
TV
AV receiver (this unit)
Operating external
devices with the supplied
remote control
p.106
Remote control
of this unit
Selecting the input source
and favorite settings at
once (SCENE)
p.44
TV remote control
Operating the TV, AV
receiver and BD/DVD
player in combination
(HDMI Control)
p.123
En
6
Full of useful functions!
● Connecting various devices (p.26)
A number of HDMI jacks and various input/output jacks
on this unit allow you to connect video devices such as
BD/DVD players, audio devices such as CD players,
game consoles and camcorders, and so on.
● Creating stereoscopic sound fields (p.48)
At time like this
Connection of presence speakers enables to create a
natural stereoscopic sound field in your room (CINEMA
DSP 3D). Even when no presence speakers are
connected, this unit automatically creates Virtual
Presence Speaker (VPS) to produce 3D surround
sound.
The combination of video/audio input jacks prepared on
this unit does not match an external device...
Use “Audio In” in the “Input” menu to change the
combination of video/audio input jacks so that it match the
output jack of your external device (p.28).
Video and audio are not synchronized...
Use “Lipsync” in the “Setup” menu to adjust the delay
between video and audio output (p.94).
Turntable
I want to hear audio from the TV speakers...
Use “Audio Output” in the “Setup” menu to select whether
to output audio signals through this unit and the TV (p.97).
CD player
BD/DVD
player
I want to this unit to be turned off automatically when not in
use...
Use “Auto Power Down” in the “Setup” menu to set the
amount of time for auto-standby (p.99).
Game
console
TV
● Listening to FM/AM radio (p.50)
Camcorder
● Playing back TV audio in surround sound
with a single HDMI cable connection
(Audio Return Channel: ARC) (p.21)
When using a TV that supports ARC, you only need a
single HDMI cable to connect the TV and this unit to
output video to the TV, input audio from the TV, and
transmit HDMI Control signals.
HDMI Control
TV audio
Video from
external device
This unit is equipped with the built-in FM/AM tuner. You
can register favorite radio stations as presets.
● Enjoying pure high fidelity sound (p.49)
When the Pure Direct mode is enabled, this unit plays
back the selected source with the least circuitry. It
allows you to enjoy Hi-Fi sound quality.
● Easy operation with a TV screen
You can navigate the various contents (iPod, USB,
network, etc.), view the information, or configure the
settings using the on-screen menu.
I want to change the on-screen menu language...
Use “Language” in the “Setup” menu to select a language
from English, Japanese, French, German, Spanish and
Russian (p.101).
I want to update the firmware...
Use “UPDATE” in the “ADVANCED SETUP” menu to update
the firmware of this unit (p.105). If this unit is connected to
the Internet, the corresponding message will be displayed
on the TV when a newer firmware is available (p.110).
There are many other settings to customize this unit.
For details, see the following pages.
●Input settings (p.80)
●Scene settings (p.83)
●Sound program and surround decoder settings (p.86)
●Various function settings (p.89)
●Information view (audio signal, video signal, etc.) (p.102)
●System settings (p.103)
En
7
Part names and functions
Front panel
1
2
3 4
5
6
7
8 9
0
A
B
Opening the front panel door
• To use controls or jacks behind the front panel door, gently press the bottom of
the door to open it. Keep the door closed when not using controls or jacks
behind the front panel door.
NATURAL SOUND AV RECEIVER RX-A810
MAIN ZONE
PURE DIRECT
ZONE 2
ZONE CONTROL
INFO
MEMORY
INPUT
AM
TUNING
VOLUME
SCENE
BD/DVD
PHONES
SILENT CINEMA
C
FM
PRESET
D
USB
TONE CONTROL
PROGRAM
TV
CD
RADIO
VIDEO AUX
STRAIGHT
iPod/iPhone
E F G H
1 MAIN ZONE
Turns on/off (standby) this unit.
2 Standby indicator
Lights up when this unit is in standby mode under any of the
following conditions.
- HDMI Control is enabled (p.123)
- The standby through function is enabled (p.97)
- The network standby function is enabled (p.98)
- The iPod is being charged (p.81)
- An iPod wireless system is connected (p.55)
3 ZONE2
Enables/disables the audio output to Zone2 (p.71).
4 ZONE CONTROL
Switches the zones (main or Zone2) to operate with the front
panel controllers (p.71).
5 INFO
Selects the information displayed on the front display (p.76).
6 MEMORY
Registers FM/AM radio stations as preset stations (p.50).
Registers USB/network contents as shortcuts (p.73).
VIDEO
L
AUDIO
R
YPAO MIC
HDMI IN
I J
K
L
7 PRESET
Selects a preset FM/AM radio station (p.51).
Selects a USB/network content from shortcuts (p.73).
8 FM/AM
Switches between FM and AM (p.50).
9 Front display
Displays information (p.9).
0 TUNING
Selects an FM/AM radio frequency (p.50).
A Remote control sensor
Receives remote control signals (p.5).
B PURE DIRECT
Enables/disables Pure Direct (p.49).
C INPUT
Selects an input source.
D SCENE
Selects the registered input source and sound program, and
HDMI output at once. Additionally, you can turn on this unit
when it is in standby mode (p.44).
E PHONES jack
For connecting headphones.
F USB jack
For connecting a USB storage device (p.61) or an iPod via
USB (p.54).
G TONE CONTROL
Adjusts the high-frequency range and low-frequency range
of sounds output from speakers and headphones (p.78).
H PROGRAM
Selects a sound program or a surround decoder (p.45).
I STRAIGHT
Enables/disables the straight decode mode (p.48).
J VIDEO AUX jacks
For connecting camcorders, game consoles, etc (p.29).
K YPAO MIC jack
For connecting the supplied YPAO microphone (p.36).
L VOLUME
Adjusts the volume.
En
8
Front display (indicators)
OUT1/OUT2
Indicate the HDMI OUT jacks currently outputting an HDMI
signal.
2 CINEMA DSP
Lights up when CINEMA DSP (p.46) is working.
CINEMA DSP 3
Lights up when CINEMA DSP 3D (p.48) is working.
3 ENHANCER
Lights up when Compressed Music Enhancer (p.49) is
working.
4 ADAPTIVE DRC
Lights up when Adaptive DRC (p.78) is working.
5 STEREO
5 6
7 89
SLEEP
ZONE
2
0
VOL.
MUTE
SW
PL
PR
C
L
R
SL
SR
SBL SB SBR
A
Lights up when HDMI signals are being input or output.
4
ENHANCER ADAPTIVE DRC
STEREO PARTY
3 TUNED
OUT 1 2
1 HDMI
3
2
1
B
6 PARTY
Lights up when this unit is in the party mode.
7 SLEEP
Lights up when the sleep timer is on.
8 ZONE 2
Lights up when the audio output to Zone2 is enabled.
9 MUTE
Flashes when audio is muted.
0 Volume indicator
Indicates the current volume.
A Cursor indicators
Indicate the remote control cursor keys currently operational.
B Information display
Displays the current status (input name, sound mode name,
etc). You can switch the information by pressing INFO (p.76).
A
C
C Speaker indicators
Indicate speaker terminals from which signals are output.
Front speaker (L)
Front speaker (R)
Center speaker
Surround speaker (L)
Surround speaker (R)
Surround back speaker (L)
Surround back speaker (R)
Surround back speaker
Presence speaker (L)
Presence speaker (R)
Subwoofer
Lights up when this unit is receiving a stereo FM radio signal.
TUNED
Lights up when this unit is receiving an FM/AM radio station
signal.
En
9
Rear panel
1
23
45
7
6
8
RS-232C
DOCK
NETWORK
HDMI 1
HDMI OUT
2
1
PHONO
COMPONENT
VIDEO
AM
HDMI 3
HDMI 4
HDMI 5
HDMI 6
HDMI 7
SPEAKERS
ANTENNA
L
HDMI 2
(BD/DVD)
ARC
R
COMPONENT
VIDEO
FM
FRONT
L
R SURROUND L
CENTER
R SURROUND BACK/
BI–AMP L
R ZONE 2/PRESENCE
L
REMOTE
PR
IN
PR
R
SINGLE
S VIDEO
GND
OUT
75Ω
PB
PB
VIDEO
VIDEO
Y
Y
MONITOR OUT
+12V
0.1A MAX.
TRIGGER OUT
EXTRA SP
SINGLE
L
CENTER
AC IN
L
R
R
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
OPTICAL
9
1 DOCK jack
For connecting an optional Yamaha products such as iPod
dock (p.55), iPod wireless system (p.55), and Bluetooth
receiver (p.59).
2 PHONO jacks
For connecting a turntable (p.29).
3 NETWORK jack
For connecting to the network (p.31).
4 ANTENNA jacks
For connecting FM and AM antennas (p.30).
5 HDMI OUT 1~2 jacks
For connecting HDMI-compatible TVs to output video/audio
signals (p.21). When using ARC, TV audio signal is input
through the HDMI OUT 1 jack.
6 HDMI1~7 jacks
For connecting HDMI-compatible playback devices to input
video/audio signals (p.26).
7 RS-232C terminal
This is a control expansion terminal for custom installation.
Consult your dealer for details.
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
0 A BC D
AUDIO
OUT
ZONE 2
OUT
FRONT
SURROUND
SUR. BACK
1 SUBWOOFER 2
PRE OUT
EF
G H
8 SPEAKERS terminals
For connecting speakers (p.17).
9 AV1~6 jacks
For connecting video/audio playback devices to input video/
audio signals (p.26).
0 AV OUT jacks
For outputting video/audio to a recording device (VCR, etc.)
when an analog input (V-AUX, AV3~6 or AUDIO1~2) is
selected (p.32).
A AUDIO1~2 jacks
For connecting audio playback devices to input audio
signals (p.29).
B MONITOR OUT jacks
COMPONENT VIDEO jack:
For connecting a TV compatible with component video to
output video signals (p.25).
VIDEO jack:
For connecting a TV compatible with composite video to
output video signals (p.25).
C REMOTE IN/OUT jacks
For connecting a Yamaha product compatible with SCENE
link playback (p.33), or connecting an infrared signal
receiver/emitter to operate devices including this unit from
another room (p.70).
D TRIGGER OUT jack
For connecting a device that supports the trigger function
(p.33).
E AUDIO OUT jacks
For outputting audio to a recording device (tape deck, etc.)
when an analog input (V-AUX, AV5~6 or AUDIO1~2) is
selected (p.32).
F ZONE2 OUT jacks
For connecting external amplifier used in Zone2 to output
audio (p.70).
G PRE OUT jacks
For connecting a subwoofer with built-in amplifier or an
external power amplifier (p.32).
H AC IN
For connecting the supplied power cable (p.34).
En
10
Remote control
1 Remote control signal transmitter
Transmits infrared signals.
1
2
2 MAIN/ZONE2
MAIN
ZONE 2
CODE SET
SOURCE RECEIVER
3
HDMI
1
4
2
5
6
1
2
3
4
7
V-AUX
3
4
5
6
AUDIO
DOCK
PHONO
NET
USB
5
FM
AM
6
PRESET
TUNING
INFO
MEMORY
7
MOVIE
MUSIC
SLEEP
PARTY
0
A
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
C
H
SCENE
BD
DVD
TV
CD
RADIO
I
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
J
DISPLAY
POP-UP
MENU
TOP
MENU
B
G
AV
TUNER
8
9
E
F
MUTE
MODE
1
2
3
5
6
7
9
0
10
K
L
M
4
TV VOL
Turns on/off an external device.
4 Input selection keys
Select an input source to play back.
HDMI1~7
HDMI1~7 jacks
V-AUX
VIDEO AUX jacks (on the front panel)
AV1~6
AV1~6 jacks
AUDIO
AUDIO1~2 jacks (press repeatedly to switch
between “AUDIO1” and “AUDIO2”)
DOCK
DOCK jack
TUNER
FM/AM radio
PHONO
PHONO jacks
NET
NETWORK jack (press repeatedly to select a
desired network source)
USB
USB jack (on the front panel)
5 Radio keys
Operate the FM/AM radio when “TUNER” is selected as the
input source.
FM
Switches to FM radio.
AM
Switches to AM radio.
MEMORY Registers FM/AM radio stations as presets.
PRESET
Selects a preset station.
TUNING
Selects the radio frequency.
6 INFO
Selects the information displayed on the front display (p.76).
7 SLEEP
Switches this unit to standby mode automatically after a
specified period of time has elapsed (sleep timer). Press
repeatedly to set the time (120 min, 90 min, 60 min, 30 min,
off).
Turns on/off the party mode (p.72).
9 SCENE
INPUT
MUTE
3 SOURCE
8 PARTY
8
ENT
TV
D
Switches the zones (main or Zone2) to operate with the
remote control (p.71).
TV CH
HDMI OUT
N
Selects the assigned input source and sound program, and
HDMI output at once. Additionally, you can turn on this unit
when it is in standby mode (p.44).
A Menu operation keys
Cursor keys
ENTER
RETURN
Select a menu or a parameter.
Confirms a selected item.
Returns to the previous screen.
B MODE
Switches between “Stereo” and “Mono” for FM radio reception.
Switches the iPod operation modes (p.57).
C Numeric keys
Enter numerical values such as radio frequencies.
D TV operation keys
Operate TV input, TV volume, etc (p.106).
E CODE SET
Registers remote control codes of external devices on the
remote control (p.106).
F SOURCE/RECEIVER
Switches the devices (this unit or external device) to operate
with the remote control (p.107). You can operate this unit
when this key lights up in orange, and an external device
when this key lights up in green.
G RECEIVER
Turns on/off (standby) this unit.
H Sound mode keys
Select a sound mode (p.45).
I OPTION
Displays the option menu (p.77).
J VOLUME
Adjusts the volume.
K DISPLAY
Display the status information on the TV (p.76).
L MUTE
Mutes the audio output.
M External device operation keys
Operate playback and menu display etc. for external
devices (p.107).
N HDMI OUT
Selects HDMI OUT jacks to be used for video/audio output
(p.43).
0 ON SCREEN
Displays the on-screen menu on the TV.
• To operate external devices with the remote control, register a
remote control code for each device in advance (p.106).
En
11
SETUP
General setup procedure
1 Placing speakers (p.13)
Select the speaker layout depending on the number of speakers and place the speakers in your room.
2 Connecting speakers (p.17)
Connect the speakers to this unit.
3 Connecting a TV (p.21)
Connect a TV to this unit.
4 Connecting playback devices (p.26)
Connect video devices (BD/DVD players, etc.) and audio devices (CD players, etc.) to this unit.
5 Connecting the FM/AM antennas (p.30)
Connect the supplied FM/AM antennas to this unit.
6 Connecting to the network (p.31)
Connect this unit to the network.
7 Connecting other devices (p.32)
Connect external devices such as an external power amplifier and recording devices.
8 Connecting the power cable (p.34)
After all the connections are complete, plug in the power cable.
9 Selecting an on-screen menu language (p.35)
Select a desired on-screen menu language (default: English).
10 Optimizing the speaker settings automatically (YPAO) (p.36)
Optimize the speaker settings such as volume balance and acoustic parameters to suit your room (YPAO).
Now all the preparations are complete. Enjoy playing movies, music, radio, etc. with this unit!
En
12
1 Speaker placement 2 3 4 5 6 7 8 9 10
1 Placing speakers
Select the speaker layout depending on the number of speakers and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
Caution
• This unit is configured for 8-ohm speakers at the factory. When connecting 6-ohm speakers, set the speaker impedance of this unit to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers. For
details, see “Setting the speaker impedance” (p.16).
Speaker system (the number of channels)
Speaker type
Abbr.
Function
7.1+2
7.1
7.1
6.1
5.1
4.1
3.1
2.1
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Front (L)
Produce front right/left channel sounds (stereo sounds).
Front (R)
Center
Produces center channel sounds (dialogs, vocals, etc).
Surround (L)
Produce surround right/left channel sounds. Surround speakers also produce surround back channel sounds when
no surround back speakers are connected.
Surround (R)
Surround back (L)
Produce surround back right/left channel sounds.
Surround back (R)
Surround back
Presence (L)
Presence (R)
Subwoofer
●
Produces mixed-down surround back right/left channel sounds.
Produce CINEMA DSP effect sounds. In combination with CINEMA DSP 3D (p.48), the presence speakers create a
natural stereoscopic sound field in your room.
Produces LFE (low-frequency effect) channel sounds and reinforces bass parts of other channels.
This channel is counted as “0.1”. You can connect 2 subwoofers (with built-in amplifier) to this unit.
●
●
●
●
●
●
●
●
●
●
●
• For information on the ideal speaker layout, see “Ideal speaker layout” (p.118).
• If you have 7 speakers, use two of them as surround back speakers or presence speakers. To reinforce the rear right/left sounds, use them as surround back speakers.
To create a natural stereoscopic sound field, use them as presence speakers.
• 2 subwoofers connected to this unit output same sounds.
En
13
1 Speaker placement 2 3 4 5 6 7 8 9 10
7.1+2 channel system
7.1 channel system (using surround back speakers)
• The surround back speakers and presence speakers do not produce sounds simultaneously. This unit
automatically switches the speakers to be used depending on a selected CINEMA DSP (p.46).
7.1 channel system (using presence speakers)
6.1 channel system
En
14
1 Speaker placement 2 3 4 5 6 7 8 9 10
5.1 channel system
4.1 channel system
3.1 channel system
2.1 channel system
En
15
1 Speaker placement 2 3 4 5 6 7 8 9 10
■ Setting the speaker impedance
This unit is configured for 8-ohm speakers at the factory. When connecting 6-ohm
speakers, set the speaker impedance to “6 Ω MIN”. In this case, you can also use
4-ohm speakers as the front speakers.
connecting speakers, connect the supplied power cable to
1 Before
this unit and then to an AC wall outlet.
2 While holding down STRAIGHT on the front panel, press MAIN ZONE
.
MAIN ZONE
STRAIGHT
3 Check that “SP IMP.” is displayed on the front display.
SPIMP.-8MIN
4 Press STRAIGHT to select “6 Ω MIN”.
MAIN ZONE to set this unit to standby mode and remove the
5 Press
power cable from the AC wall outlet.
Now you are ready to connect the speakers.
En
16
1 2 Speaker connections 3 4 5 6 7 8 9 10
2 Connecting speakers
Connect the speakers placed in your room to the unit.
Here are connections of 7.1+2, 7.1 and 6.1 channel
system as examples. If you select another system,
connect speakers while referring to the connection of
6.1 channel system.
7.1+2 channel system
This unit (rear)
7.1 channel system
(using surround back speakers)
This unit (rear)
Caution
• Remove the power cable of this unit from an AC wall outlet and
turn off the subwoofer before connecting the speakers.
• Be careful that the core of the speaker cable does not touch
anything or come into contact with the metal areas of this unit.
This may damage this unit or the speakers. If the speaker
cables short circuit, “CHECK SP WIRES” will appear on the
front display when this unit is turned on.
Cables necessary for connection (commercially
available)
Speaker cables (x the number of speakers)
+
–
+
–
Audio pin cable (2 for connecting 2 subwoofers)
En
17
1 2 Speaker connections 3 4 5 6 7 8 9 10
7.1 channel system
(using presence speakers)
This unit (rear)
6.1 channel system
This unit (rear)
When using only one surround back speaker, connect it
to the SINGLE jack (L side).
En
18
1 2 Speaker connections 3 4 5 6 7 8 9 10
■ Connecting speaker cables
Speaker cables have two wires. One is for connecting the
negative (-) terminal of the unit and the speaker, and the
other is for the positive (+) terminal. If the wires are colored
to prevent confusion, connect the black wire to the
negative and the other wire to the positive.
a Remove approximately 10 mm of insulation from the
ends of the speaker cable, and twist the bare wires of the
cable together firmly.
b Loosen the speaker terminal.
c Insert the bare wires of the cable into the gap on the side
(upper right or bottom left) of the terminal.
d Tighten the terminal.
+ (red)
Connecting front speakers that
support bi-amp connections
When using front speakers that support bi-amp
connections, connect them to the FRONT jacks and
SURROUND BACK/BI-AMP jacks.
To enable the bi-amp function, set “Power Amp Assign”
(p.91) in the “Setup” menu to “5ch BI-AMP” after
connecting the power cable to an AC wall outlet.
Caution
• Before making bi-amp connections, remove any brackets or
cables that connect a woofer with a tweeter. Refer to the
instruction manual of the speakers for details. When not making
bi-amp connections, make sure that the brackets or cables are
connected before connecting the speaker cables.
• When using bi-amp connections, surround back speakers
cannot be used.
This unit (rear)
c
b
FR
ON
T
d
a
– (black)
■ Connecting the subwoofer
Use an audio pin cable to connect the subwoofer.
Audio pin cable
En
19
Input/output jacks and cables
■ Video/audio jacks
■ Video jacks
■ Audio jacks
HDMI jacks
COMPONENT VIDEO jacks
OPTICAL jacks
Transmit digital video and digital sound through a single
jack. Use an HDMI cable.
Transmit video signals separated into three
components: luminance (Y), chrominance blue (PB),
and chrominance red (PR). Use a component video
cable with three plugs.
Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.
HDMI cable
Digital Optical cable
Component video cable
• Use a 19-pin HDMI cable with the HDMI logo. We recommend using
a cable less than 5.0 m long to prevent signal quality degradation.
COAXIAL jacks
• To connect a device that has a DVI jack, an HDMI/DVI-D cable is
required.
Transmit digital audio signals. Use a digital coaxial
cable.
Digital coaxial cable
• The HDMI jacks of this unit support the HDMI Control, Audio Return
Channel (ARC), and 3D video transmission (through output)
features.
S VIDEO jack
Transmits S-video signals that include luminance (Y)
and chrominance (C) components. Use an S-video
cable.
S-video cable
AUDIO jacks
Transmit analog stereo audio signals. Use a stereo pin
cable.
Stereo pin cable
VIDEO jacks
Transmit analog video signals. Use a video pin cable.
Video pin cable
En
20
1 2 3 TV connection 4 5 6 7 8 9 10
3 Connecting a TV
Connect a TV to this unit so that videos input to this unit can be output to the TV.
You can also enjoy playback of TV audio on this unit.
The connection method varies depending on functions and video input jacks available
on your TV.
Refer to the instruction manual of the TV and choose a connection method.
Does your TV support
Audio Return Channel (ARC)?
Yes
■ Connection method 1 (p.21)
No
Does your TV support
HDMI Control?
■ Connection method 1 (HDMI Control/ARC-compatible TV)
Connect the TV to this unit with an HDMI cable.
• The following explanation is based on the assumption that you have not changed the “HDMI” parameters
(p.96) in the “Setup” menu.
• HDMI Control is available only on the HDMI OUT 1 jack.
HDMI OUT 1 jack
This unit
(rear)
Yes
HDMI OUT
2
1
HDMI input
(ARC-compatible)
ARC
■ Connection method 2 (p.23)
HDMI
DOCK
NETWORK
HDMI OUT
2
1
No
PHONO
COMPONENT
VIDEO
ANTENNA
L
AM
HDMI
(
ARC
COMPONENT
VIDEO
HDMI
FM
PR
PR
R
Does your TV have an
HDMI input jack?
Yes
GND
S VIDEO
75Ω
PB
■ Connection method 3 (p.24)
PB
VIDEO
VID
Y
Y
MONITOR OU
L
R
No
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
OPTICAL
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
TV
■ Connection method 4 (p.25)
About HDMI Control
HDMI Control allows you to operate external devices via HDMI. If you connect a TV
that supports HDMI Control to this unit with an HDMI cable, you can control this unit
(power, volume, etc.) in conjunction with TV remote control operations. You can also
control playback devices (HDMI Control-compatible BD/DVD player, etc.)
connected to this unit with an HDMI cable. For details, see “HDMI Control” (p.123).
• If you make an HDMI connection between your TV and this unit, any videos input to this unit can be output
to the TV no matter how you connect video devices to this unit. For details, see “Video signal flow” (p.122).
• You can connect another TV or a projector by using the HDMI OUT 2 jack (p.25).
About Audio Return Channel (ARC)
ARC allows audio signals to travel both ways under HDMI Control. So if you connect
a TV that supports HDMI Control and ARC to this unit with a single HDMI cable, you
can output video/audio to the TV or input TV audio to this unit.
En
21
1 2 3 TV connection 4 5 6 7 8 9 10
Necessary settings
To use HDMI Control and ARC, you need to configure the following settings.
For details on settings and operations of your TV, refer to the instruction manual of the
TV.
connecting external devices (TV, playback devices, etc.) and
1 After
power cable of this unit, turn on this unit, TV and playback devices.
2 Configure the settings of this unit.
a Check that ARC is enabled on the TV.
b Switch the TV input to display the video from this unit.
c Press ON SCREEN.
VOLUME
ENTER
RETURN
RN
TOP
DISPLAY
D
DIS
A
a Enable HDMI Control on the TV and playback devices (HDMI Control-compatible BD/
DVD player, etc).
b Turn off the main power of the TV and then turn off this unit and playback devices.
c Turn on the main power of the TV and then turn on this unit and playback devices.
d Switch the TV input to display the video from this unit.
e Check the followings.
On this unit: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV: The video from the playback device is displayed.
OPTION
ON SCREEN
3 Configure the settings for HDMI Control.
ON SCREEN
Cursor keys
ENTER
POP UP
d Use the cursor keys to select “Setup” and press ENTER.
f Check that this unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
Now the necessary settings are complete.
If you select a TV program with the TV remote control, the input source of this unit will
be automatically switched to “AV4” and the TV audio will be played back on this unit.
If TV audio cannot be heard, check that “ARC” (p.96) in the “Setup” menu is set to
“On”.
• If HDMI Control does not work properly, try turning off and on (or unplugging and re-plugging) the
devices. It may solve the problem.
• If any audio interruption happens while using ARC, set “ARC” (p.96) in the “Setup” menu to “Off” and
use a digital optical cable to input TV audio to this unit (p.23).
e Use the cursor keys ( / ) to select “HDMI”.
• “AV4” is set as TV audio input at the factory. If you have connected any external device to the AV4
jacks, use “TV Audio Input” (p.96) in the “Setup” menu to change the TV audio input assignment. To
use the SCENE function (p.44), you also need to change the input assignment for SCENE(TV).
f Use the cursor keys ( / ) to select “HDMI Control” and press ENTER.
g Use the cursor keys to select “On”.
h Press ON SCREEN.
En
22
1 2 3 TV connection 4 5 6 7 8 9 10
■ Connection method 2 (HDMI Control-compatible TV)
Necessary settings
Connect the TV to this unit with an HDMI cable and a digital optical cable.
To use HDMI Control, you need to configure the following settings.
For details on settings and operations of your TV, refer to the instruction manual of the
TV.
• The following explanation is based on the assumption that you have not changed the “HDMI” parameters
(p.96) in the “Setup” menu.
connecting external devices (TV, playback devices, etc.) and
1 After
power cable of this unit, turn on this unit, TV and playback devices.
2 Configure the settings of this unit.
• HDMI Control is available only on the HDMI OUT 1 jack.
HDMI OUT 1 jack
This unit
(rear)
a Switch the TV input to display the video from this unit.
HDMI OUT
2
1
b Press ON SCREEN.
ARC
HDMI
DOCK
HDMI input
OPTION
ON SCREEN
NETWORK
HDMI OUT
2
1
PHONO
COMPONENT
VIDEO
AM
VOLUME
ENTER
ANTENNA
L
HDMI
(
ARC
COMPONENT
VIDEO
HDMI
FM
RETURN
RN
PR
DISPLAY
D
DIS
A
ON SCREEN
Cursor keys
ENTER
PR
R
GND
S VIDEO
75Ω
PB
PB
VIDEO
TOP
VID
Y
Y
L
OPTICAL
R
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
POP UP
c Use the cursor keys to select “Setup” and press ENTER.
MONITOR OU
OPTICAL
AV 5
AV 6
AV
OUT
OPTICAL
O
AUDIO 1
O
AUDIO 2
(TV)
AV 4
AV4 (OPTICAL) jack
TV
Audio output
(digital optical)
• If you make an HDMI connection between your TV and this unit, any videos input to this unit can be output
to the TV no matter how you connect video devices to this unit. For details, see “Video signal flow” (p.122).
• You can connect another TV or a projector by using the HDMI OUT 2 jack (p.25).
d Use the cursor keys ( / ) to select “HDMI”.
e Use the cursor keys ( / ) to select “HDMI Control” and press ENTER.
f Use the cursor keys to select “On”.
g Press ON SCREEN.
En
23
1 2 3 TV connection 4 5 6 7 8 9 10
3 Configure the settings for HDMI Control.
a Enable HDMI Control on the TV and playback devices (HDMI Control-compatible BD/
DVD player, etc).
b Turn off the main power of the TV and then turn off this unit and playback devices.
c Turn on the main power of the TV and then turn on this unit and playback devices.
■ Connection method 3 (TV with HDMI input jacks)
Connect the TV to this unit with an HDMI cable and a digital optical cable.
HDMI OUT 1 jack
This unit
(rear)
HDMI OUT
2
1
ARC
HDMI
HDMI input
d Switch the TV input to display the video from this unit.
DOCK
NETWORK
e Check the followings.
On this unit: The input to which the playback device is connected is selected. If not,
select the input source manually.
HDMI OUT
2
1
PHONO
COMPONENT
VIDEO
ANTENNA
L
AM
COMPONENT
VIDEO
PR
PR
R
GND
S VIDEO
75Ω
PB
VIDEO
f Check that this unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
If you select a TV program with the TV remote control, the input source of this unit will
be automatically switched to “AV4” and the TV audio will be played back on this unit.
• If HDMI Control does not work properly, try turning off and on (or unplugging and re-plugging) the
devices. It may solve the problem.
VID
Y
Y
Now the necessary settings are complete.
HDMI
FM
PB
On the TV: The video from the playback device is displayed.
HDMI
(
ARC
MONITOR OU
L
OPTICAL
R
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
OPTICAL
AV 5
AV 6
AV
OUT
OPTICAL
O
AUDIO 1
O
AUDIO 2
(TV)
AV 4
AV4 (OPTICAL) jack
TV
Audio output
(digital optical)
If switch the input source of this unit to “AV4” by pressing AV4 or SCENE(TV), the TV
audio will be played back on this unit.
• If you make an HDMI connection between your TV and this unit, any videos input to this unit can be output
to the TV no matter how you connect video devices to this unit. For details, see “Video signal flow” (p.122).
• “AV4” is set as TV audio input at the factory. If you have connected any external device to the AV4
jacks or if you want to use another input jack (other than OPTICAL) for connecting the TV, use “TV
Audio Input” (p.96) in the “Setup” menu to change the TV audio input assignment. To use the SCENE
function (p.44), you also need to change the input assignment for SCENE(TV).
• You can connect another TV or a projector by using the HDMI OUT 2 jack (p.25).
• If you have connected any external device to the AV4 jacks or if you want to use another input jack (other
than OPTICAL) for connecting the TV, connect the TV to one of the AV1~6 and AUDIO1~2 jacks. To use
the SCENE function (p.44), you also need to change the input assignment for SCENE(TV).
En
24
1 2 3 TV connection 4 5 6 7 8 9 10
■ Connection method 4 (TV without HDMI input jacks)
VIDEO (composite video) connection (with a video pin cable)
Depending on the video input jacks available on your TV, choose one of the following
connections.
If you select “AV4” as the input source by pressing AV4 or SCENE(TV), the TV audio will
be played back on this unit.
This unit
(rear)
MONITOR OUT
(VIDEO) jack
Video input
(composite video)
DOCK
NETWORK
HDMI 1
HDMI OUT
2
1
VIDEO
(BD/DVD
ARC
• If you connect your TV to this unit with a cable other than HDMI, videos input to this unit via HDMI cannot
be output to the TV. Also, analog videos that can be output to the TV differ according to the “Analog to
Analog Conversion” setting. For details, see “Video signal flow” (p.122).
PHONO
COMPONENT
VIDEO
ANTENNA
L
AM
VIDEO
V
COMPONENT
VIDEO
V
FM
MONITOR OUT
PR
PR
R
GND
S VIDEO
75Ω
PB
PB
VIDEO
VIDEO
Y
Y
MONITOR OUT
L
• If you have connected any external device to the AV4 jacks or if you want to use another input jack (other
than OPTICAL) for connecting the TV, connect the TV to one of the AV1~6 and AUDIO1~2 jacks. To use
the SCENE function (p.44), you also need to change the input assignment for SCENE(TV).
R
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
OPTICAL
AV 5
AV
OUT
AV 6
AUDIO 1
AUDIO 2
TV
COMPONENT VIDEO connection (with a component video cable)
■ Connecting another TV or a projector
MONITOR OUT
(COMPONENT VIDEO) jacks
Video input
(component video)
COMPONENT
VIDEO
This unit
(rear)
COMPONENT
VIDEO
PR
PR
Y
PR
HDMI OUT
2
Y
ARC
COMPONENT
VIDEO
AM
HDMI
HDMI input
PB
DOCK
Y
NETWORK
HDMI OUT
2
1
ANTENNA
L
PB
HDMI 1
MONITOR (BD/DVD)
OUT
Y
PHONO
HDMI OUT
2
1
ARC
NETWORK
1
HDMI OUT 2 jack
This unit
(rear)
PR
PB
PB
DOCK
This unit has 2 HDMI output jacks. If you connect another TV or a projector to this unit
with an HDMI cable, you can switch the TVs (or projector) to be used for watching
videos with the remote control (p.43).
COMPONENT
VIDEO
HDMI
ARC
FM
REMO
PR
IN
PR
R
GND
PHONO
S VIDEO
PB
PB
VIDEO
COMPONENT
VIDEO
OUT
75Ω
ANTENNA
L
AM
HDMI
COMPONENT
VIDEO
FM
PR
VIDEO
PR
R
Y
Y
MONITOR OUT
+
0.1
TRIGGER
GND
S VIDEO
75Ω
PB
PB
VIDEO
L
VID
Y
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
Y
OPTICAL
R
OPTICAL
AV 5
AV 6
AV
OUT
OPTICAL
O
AUDIO 1
MONITOR OU
L
O
AUDIO 2
Projector
R
(TV)
AV 4
AV4 (OPTICAL) jack
TV
Audio output
(digital optical)
OPTICAL
AV 1
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
(TV)
AV 3
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
TV (already connected)
• HDMI Control is not available on the HDMI OUT 2 jack.
En
25
1 2 3 4 Playback device connections 5 6 7 8 9 10
4 Connecting playback devices
This unit is equipped with a variety of input jacks including HDMI input jacks to allow
you to connect different types of playback devices. For information on how to connect
an iPod, a Bluetooth component or a USB storage device, see the following pages.
- Connecting an iPod (p.54)
- Connecting a Bluetooth receiver (p.59)
- Connecting a USB storage device (p.61)
■ Component video connection
Connect a video device to this unit with a component video cable and an audio cable
(digital optical or digital coaxial). Choose a set of input jacks (on this unit) depending
on the audio output jacks available on your video device.
Output jacks on video device
Input jacks on this unit
Video
Connecting video devices (BD/DVD players, etc.)
Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles
to this unit. Depending on the video/audio output jacks available on your video device,
choose one of the following connections. We recommend using an HDMI connection if the
video device has an HDMI output jack.
Audio
Digital optical
AV1 (COMPONENT VIDEO + OPTICAL)
Digital coaxial
AV2 (COMPONENT VIDEO + COAXIAL)
Component video
Video output
(component video)
AV1~2
(COMPONENT VIDEO)
jacks
This unit (rear)
COMPONENT
VIDEO
COMPONENT
VIDEO
• Videos input to this unit via HDMI cannot be output to a TV connected to this unit with a cable other than
HDMI.
DOCK
NETWORK
PR
PR
HDMI OUT
2
1
PR
PR
PB
PB
Y
Y
PB
ARC
PHONO
COMPONENT
VIDEO
• If the combination of video/audio input jacks prepared on this unit does not match your video device,
change its combination according to the output jacks of your device (p.28).
PB
ANTENNA
L
AM
Y
FM
PR
R
S VIDEO
GND
Y
PB
75Ω
VIDEO
Y
■ HDMI connection
L
Connect a video device to this unit with an HDMI cable.
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
HDMI 6
HDMI 7
(BD/DVD)
HDMI 2
HDMI 3
HDMI 4
HDMI 5
O
HDMI 6
HDMI 7
(BD/DVD)
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
OPTICAL
C
C
OPTICAL
OPTICAL
AV 5
AV 6
AV
COAXIAL
OUT
AV 2
AUDIO 1
Video device
COAXIAL
RS-232C
HDMI 1
OPTICAL
AV 1
HDMI1~7 jacks
This unit
(rear)
O
R
HDMI output
HDMI
AV1(OPTICAL) jack or
Audio output
AV2(COAXIAL) jack
(digital optical or digital
coaxial)
If you select the input source by pressing AV1~2, the video/audio played back on the
video device will be output from this unit.
SPEAKERS
R
COMPONENT
VIDEO
FRONT
L
R SURROUND L
CENTER
R SURROUND BACK/
BI–AMP L
R ZO
HDMI
REMOTE
IN
PR
SINGLE
OUT
PB
Y
HDMI
VIDEO
MONITOR OUT
+12V
0.1A MAX.
TRIGGER OUT
SINGLE
CENTER
L
R
AUDIO 2
AUDIO
OUT
ZONE 2
OUT
FRONT
SURROUND
SUR. BACK
PRE OUT
1 SUBWOOFER 2
Video device
If you select the input source by pressing HDMI1~7, the video/audio played back on
the video device will be output from this unit.
En
26
1 2 3 4 Playback device connections 5 6 7 8 9 10
■ S-video connection
■ Composite video connection
Connect a video device to this unit with an S-video cable and a stereo pin cable.
Connect a video device to this unit with a video pin cable and an audio cable (digital
coaxial, digital optical or stereo pin cable). Choose a set of input jacks (on this unit)
depending on the audio output jacks available on your video device.
Output jacks on video device
Input jacks on this unit
Video
Audio
S-video
Analog stereo
Output jacks on video device
AV5 (S VIDEO + AUDIO)
Input jacks on this unit
Video
Audio
This unit (rear)
Video output
(S-video)
AV5 (S VIDEO)
jack
DOCK
Digital coaxial
AV3 (VIDEO + COAXIAL)
Digital optical
AV4 (VIDEO + OPTICAL)
Composite video
AV5 (VIDEO + AUDIO)
Analog stereo
NETWORK
AV6 (VIDEO + AUDIO)
S
PHONO
COMPONENT
VIDEO
S
L
PR
S VIDEO
S VIDEO
R
GND
Video output
(composite video)
S VIDEO
PB
This unit (rear)
VIDEO
AUDIO
Y
L
L
L
L
R
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
AV3~6(VIDEO)
jack
Video device
DOCK
R
OPTICAL
AV 5
NETWORK
R
AV 6
R
1
VIDEO
COMPONENT
VIDEO
AV5 (AUDIO) jacks
V
HDMI OUT
2
ARC
R
V
PHONO
AV 5
VIDEO
L
Audio output
(analog stereo)
ANTENNA
L
AM
FM
PR
R
GND
S VIDEO
75Ω
PB
Video device
VIDEO
Y
If you select the input source by pressing AV5, the video/audio played back on the
video device will be output from this unit.
L
C
R
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
C
COAXIAL
OPTICAL
AV 5
AV 6
AV
OUT
COAXIAL
AUDIO 1
O
O
OPTICAL
OPTICAL
L
• When video signals are input through the S VIDEO jack and VIDEO jack of the AV5 jack at the same time,
priority is given to the signals input through the S VIDEO jack.
• Analog videos that can be output to the TV differ according to the “Analog to Analog Conversion” setting.
For details, see “Video signal flow” (p.122).
L
L
L
R
R
R
R
Any of AV3(COAXIAL) jack,
AV4(OPTICAL) jack,
AV5~6(AUDIO) jacks
Audio output
(any of digital optical,
digital coaxial, analog stereo)
If you select the input source by pressing AV3~6, the video/audio played back on the
video device will be output from this unit.
En
27
1 2 3 4 Playback device connections 5 6 7 8 9 10
■ Changing the combination of video/audio input jacks
If the combination of video/audio input jacks prepared on this unit does not match your
video device, change its combination according to the output jacks of your device. It
enables you to connect a video device that has the following video/audio output jacks.
Output jacks on video device
Video
HDMI
Component video
Input jacks on this unit
Audio
Video
Audio
Digital optical
HDMI1~7
AV1 (OPTICAL)
AV4 (OPTICAL)
Digital coaxial
HDMI1~7
AV2~3 (COAXIAL)
Analog stereo
HDMI1~7
AV5~6 (AUDIO)
AUDIO 1~2
Analog stereo
AV1~2
(COMPONENT
VIDEO)
AV5~6 (AUDIO)
AUDIO1~2
connecting external devices (TV, playback devices, etc.) and
1 After
power cable of this unit, turn on this unit and TV.
2 Switch the TV input to display the video from this unit.
3 Press ON SCREEN.
4 Use the cursor keys to select “Input” and press ENTER.
the cursor keys ( / ) to select “AV2” (video input jack to be
5 Use
used) and press the cursor key ( ).
Necessary setting
For example, if you have connected a video device to AV2 (COMPONENT VIDEO) and
AV5 (AUDIO) jacks of this unit, change the combination setting as follows.
Video output
(component video)
AV2 (COMPONENT VIDEO) jacks
6 Use the cursor keys to select “Audio In” and press ENTER.
7 Use the cursor keys to select “AV5” (audio input jack to be used).
COMPONENT
VIDEO
PR
PR
PB
DOCK
PR
Y
NETWORK
HDMI OUT
2
1
Y
PHONO
COMPONENT
VIDEO
PB
PB
ARC
Y
ANTENNA
L
AM
FM
PR
R
GND
S VIDEO
75Ω
PB
VIDEO
8 Press ON SCREEN.
L
Y
L
AUDIO
L
L
R
R
R
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
OPTICAL
AV 5
AV 6
AV
OUT
AV 5
This unit (rear)
L
AUDIO 1
AV5 (AUDIO) jacks
Video device
Now the necessary setting is complete.
R
R
Audio output
(analog stereo)
If you select “AV2” as the input source by pressing AV2, the video/audio played
back on the video device will be output from this unit.
En
28
1 2 3 4 Playback device connections 5 6 7 8 9 10
Connecting audio devices (CD players, etc.)
Connecting to the jacks on the front panel
Connect audio devices such as CD players, MD players and a turntable to this unit.
Depending on the audio output jacks available on your audio device, choose one of the
following connections.
Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as a
game console and a camcorder to this unit.
Before making a connection, stop playback on the device and turn down the volume of
this unit.
Audio output jacks on audio device
Audio input jacks on this unit
Digital optical
AV1 (OPTICAL)
AV4 (OPTICAL)
Digital coaxial
AV2~3 (COAXIAL)
Analog stereo
AV5~6 (AUDIO)
AUDIO1~2
Turntable (PHONO)
PHONO
USB
PHONES
SILENT CINEMA
iPod/iPhone
TONE CONTROL
PROGRAM
VIDEO AUX
STRAIGHT
VIDEO
V
L
L
AUDIO
R
R
YPAO MIC
HDMI IN
HDMI
This unit (front)
Audio output (PHONO)
PHONO jacks
PHONO
L
PHONO
L
This unit (rear)
L
L
R
R
R
R
GND
Turntable
GND
DOCK
NETWORK
Game console
HDMI OUT
2
1
ARC
PHONO
COMPONENT
VIDEO
ANTENNA
L
AM
O
COMPONENT
VIDEO
OPTICAL
PR
R
GND
O
FM
PR
OPTICAL
S VIDEO
75Ω
PB
PB
VIDEO
Y
Y
C
VI
MONITOR OU
L
COAXIAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
COAXIAL
L
L
L
R
OPTICAL
C
OPTICAL
AV 5
AV 6
AV
OUT
Audio device
L
R
AUDIO 1
Camcorder
R
AUDIO 2
R
AV1~6 jacks
AUDIO1~2 jacks
R
Audio output
(any of digital optical, digital coaxial,
analog stereo)
If you select the input source by pressing AV1~6, AUDIO1~2 or PHONO, the audio
played back on the audio device will be output from this unit.
If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played
back on the device will be output from this unit.
• If you connect video devices to both the HDMI IN jack and VIDEO/AUDIO jacks, this unit outputs video/
audio input through the HDMI IN jack.
En
29
1 2 3 4 5 FM/AM antenna connections 6 7 8 9 10
5 Connecting the FM/AM antennas
Connect the supplied FM/AM antennas to this unit.
FM antenna
AM antenna
This unit (rear)
RS-232C
DOCK
NETWORK
HDMI 1
HDMI OUT
2
1
PHONO
COMPONENT
VIDEO
AM
HDMI 3
HDMI 4
HDMI 5
HDMI 6
HDMI 7
SPEAKERS
ANTENNA
L
HDMI 2
(BD/DVD)
ARC
R
COMPONENT
VIDEO
FM
FRONT
L
R SURROUND L
CENTER
R SURROUND BACK/
BI–AMP L
R ZONE 2
REMOTE
PR
IN
PR
R
GND
SINGLE
S VIDEO
OUT
75Ω
PB
PB
VIDEO
VIDEO
Y
Y
MONITOR OUT
+12V
0.1A MAX.
TRIGGER OUT
EX
SINGLE
L
CENTER
L
Assembling and connecting the AM antenna
Hold down
Insert
Release
• Unwind the antenna cable from the AM antenna unit only the length needed.
• The wires of the AM antenna have no polarity.
En
30
1 2 3 4 5 6 Network connections 7 8 9 10
6 Connecting to the network
Connect this unit to your router with a commercially-available STP network cable (CAT-5
or higher straight cable).
You can enjoy Internet radio or music files stored on PCs and DLNA servers such as
Network Attached Storage (NAS) on this unit.
Internet
Network Attached Storage
(NAS)
• Some security software installed on your PC or the firewall settings of your network devices (such as a
router) may block the access of this unit to the network devices or the Internet. In such cases, configure the
security software or firewall settings appropriately.
• You can connect this unit to up to 16 music servers (PC, etc.), and each server must be connected to the
same subnet as this unit.
• To use the service via the Internet, broadband connection is strongly recommended.
WAN
PC
LAN
Modem
Router
Network cable
DOCK
NETWORK
HDMI 1
HDMI OUT
2
1
PHONO
COMPONENT
VIDEO
ANTENNA
L
AM
HDMI 2
(BD/DVD)
ARC
R
COMPONENT
VIDEO
FM
REMOTE
PR
IN
PR
R
GND
S VIDEO
OUT
75Ω
PB
PB
VIDEO
VIDEO
Y
Y
MONITOR OUT
+12V
0.1A MAX.
TRIGGER OUT
L
R
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
OPTICAL
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
This unit (rear)
• When using a router that supports the DHCP function, the network parameters (IP address, etc.) will be
automatically assigned to this unit without configuring the network settings of this unit. If your router does
not support the DHCP function or you want to configure the network parameters manually, configure the
network settings (p.97).
• You can check whether the network parameters (IP address, etc.) are properly assigned to this unit in
“Network” (p.102) in the “Information”.
En
31
1 2 3 4 5 6 7 Other connections 8 9 10
Connecting video/audio recording devices
7 Connecting other devices
You can connect video/audio recording devices to the AV OUT and AUDIO OUT jacks.
These jacks output analog video/audio signals selected as the input.
Connecting an external power amplifier
When connecting an external power amplifier (pre-main amplifier) to enhance speaker
output, connect the input jacks of the power amplifier to the PRE OUT jacks of this unit.
The same channel signals are output from the PRE OUT jacks as from their
corresponding SPEAKERS terminals.
• To copy video/audio from a video device, connect the video device to the AV5~6 jacks or V-AUX (VIDEO/
AUDIO) jacks of this unit.
• To copy audio from an audio device, connect the audio device to the AV5~6 jacks, AUDIO1~2 jacks or VAUX (AUDIO) jacks of this unit.
Video/audio input
This unit
(rear)
This unit (rear)
AV OUT jacks
VIDEO
RS-232C
V
HDMI 1
HDMI OUT
2
1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
HDMI 6
ORK
HDMI 7
(BD/DVD)
ARC
HDMI 1
HDMI OUT
2
1
HDMI 2
R
COMPONENT
VIDEO
FRONT
L
R SURROUND L
CENTER
R SURROUND BACK/
BI–AMP L
R ZONE 2/PRESENCE
L
L
ANTENNA
FM
AM
IN
FM
S VIDEO
MONITOR OUT
+12V
0.1A MAX.
TRIGGER OUT
CENTER
Y
AC IN
R
VIDEO
AV
OUT
EXTRA SP
SINGLE
Video recording device
R
R
OUT
75Ω
PB
Y
CEN
PR
GND
VIDEO
L
L
IN
SINGLE
OUT
PB
FRONT
REMOTE
PR
75Ω
L
R
COMPONENT
VIDEO
REMOTE
S VIDEO
HDMI
L
SPEAKERS
ANTENNA
HDMI 3
(BD/DVD)
ARC
AM
V
MONITOR OUT
AUDIO
+12V
0.1A MAX.
TRIGGER OUT
L
L
R
R
R
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
ZONE 2
OUT
FRONT
SURROUND
SUR. BACK
1 SUBWOOFER 2
PRE OUT
OPTICAL
(TV)
AV 4
1 23 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
ZONE 2
OUT
5
L
L
L
R
R
1 FRONT jacks
R
Output front channel sounds.
2 SURROUND jacks
Output surround channel sounds.
AUDIO
OUT
AUDIO OUT jacks
Audio recording
device
AUDIO
Audio input
3 SUR. BACK jacks
Output surround back channel sounds. When using only one external amplifier for the surround
back channel, connect it to the SINGLE jack (L side).
4 SUBWOOFER1~2 jacks
For connecting a subwoofer with built-in amplifier. When 2 subwoofers are connected, the same
sound is output from them.
5 CENTER jack
Outputs center channel sounds.
En
32
1 2 3 4 5 6 7 Other connections 8 9 10
Connecting a device compatible
with SCENE link playback (remote connection)
Connecting a device compatible
with the trigger function
If you have a Yamaha product that has the capability of the SCENE control signal
transmission, you can control the Yamaha product in conjunction with a scene selection
(p.44) by connecting it to the REMOTE OUT jack with a monaural mini-jack cable.
The trigger function can control an external device in conjunction with operations
(power-on/off, input selection, etc.) on this unit. If you have a Yamaha subwoofer that
supports a system connection or a device with a trigger input jack, you can use the
trigger function by connecting the external device to the TRIGGER OUT jack.
This unit
(rear)
REMOTE OUT jack
This unit (rear)
REMOTE
IN
ORK
HDMI 1
HDMI OUT
2
1
HDMI 2
HDMI 3
HDMI
OUT
(BD/DVD)
ARC
ORK
ANTENNA
AM
R
COMPONENT
VIDEO
FM
FRONT
L
HDMI 1
HDMI OUT
2
1
CEN
HDMI 2
HDMI 3
HDMI
(BD/DVD)
ARC
REMOTE
IN
ANTENNA
PR
GND
S VIDEO
OUT
75Ω
PB
Y
AM
Remote input
VIDEO
MONITOR OUT
R
COMPONENT
VIDEO
FM
GND
S VIDEO
L
CEN
OUT
75Ω
+12V
0.1A MAX.
TRIGGER OUT
PB
VIDEO
REMOTE
IN
L
FRONT
REMOTE
IN
PR
Y
R
MONITOR OUT
System connection
input
+12V
0.1A MAX.
TRIGGER OUT
L
OPTICAL
(TV)
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
ZONE 2
OUT
Yamaha product
(DVD player, etc.)
R
OPTICAL
(TV)
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO
OUT
AUDIO 2
ZONE 2
OUT
+12V
0.1A MAX.
TRIGGER OUT
TRIGGER OUT jack
• If you connect a Yamaha product compatible with SCENE link playback to the REMOTE OUT jack, you can
start playback on the Yamaha product in conjunction with a scene selection (p.44). To enable the SCENE
link playback, specify the device type in “Device Control” (p.84) in the “Scene” menu.
Yamaha subwoofer that
supports a system connection
• You also connect an infrared signal receiver/emitter to operate devices in the main zone from Zone2 (p.70).
• You can configure the trigger function settings in “Trigger Output” (p.100) in the “Setup” menu.
En
33
1 2 3 4 5 6 7 8 Power cable connection 9 10
8 Connecting the power cable
After all the connections are complete, connect the supplied power cable to this unit
and then to an AC wall outlet.
This unit (rear)
RS-232C
MI 3
HDMI 4
HDMI 5
HDMI 6
HDMI 7
SPEAKERS
T
L
R SURROUND L
CENTER
R SURROUND BACK/
BI–AMP L
R ZONE 2/PRESENCE
L
SINGLE
EXTRA SP
SINGLE
CENTER
AC IN
L
R
UDIO
OUT
ZONE 2
OUT
FRONT
SURROUND
SUR. BACK
1 SUBWOOFER 2
PRE OUT
To an AC wall outlet
En
34
1 2 3 4 5 6 7 8 9 Language setting 10
MAIN
ZONE 2
CODE SET
SOURCE RECEIVER
RECEIVER
9 Selecting an on-screen menu language
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
PRESET
TUNING
Select a desired on-screen menu language from English (default),
Japanese, French, German, Spanish and Russian.
AV
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
SCENE
BD
DVD
TV
CD
RADIO
ON SCREEN
1 Press RECEIVER to turn on this unit.
on the TV and switch the TV input to display
2 Turn
the video from this unit.
3 Press ON SCREEN.
the cursor keys to select “Setup” and press
4 Use
ENTER.
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
POP-UP
MENU
TOP
MENU
Cursor keys
ENTER
DISPLAY
A
MUTE
MODE
1
2
3
5
6
7
9
0
10
4
8
ENT
TV
INPUT
TV VOL
TV CH
the cursor keys ( / ) to select “Language” and
5 Use
the cursor keys ( / ) to select a desired language.
HDMI OUT
MUTE
6 To exit from the menu, press ON SCREEN.
• The information on the front display is provided in English only.
En
35
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
MAIN
ZONE 2
CODE SET
SOURCE RECEIVER
RECEIVER
10 Optimizing the speaker settings automatically (YPAO)
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
BD
DVD
TV
AV
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
SCENE
CD
RADIO
By using the Yamaha Parametric room Acoustic Optimizer (YPAO)
function, this unit automatically detects speaker connections and
distances from the listening position, and optimizes the speaker
settings such as volume balance and acoustic parameters to suit
your room.
the YPAO microphone at ear height in your
4 Place
listening position and connect it to the YPAO MIC
jack on the front panel.
This unit (front)
Please note the following when using YPAO.
• Use YPAO after connecting a TV and speakers to this unit.
• During the measuring process, the test tones are output at high volume. Take care
that the test tone does not frighten small children. Also, refrain from using this
function at night when it may be a nuisance to others.
OPTION
ON SCREEN
• During the measuring process, you cannot adjust the volume.
• During the measuring process, keep the room as quiet as possible.
VOLUME
ENTER
RETURN
• Do not connect headphones.
DISPLAY
A
• If your subwoofer supports the auto-standby function, disable it.
POP-UP
MENU
TOP
MENU
MUTE
MODE
1
2
3
5
6
7
9
0
10
4
8
ENT
TV
INPUT
TV VOL
MUTE
TV CH
HDMI OUT
1 Press RECEIVER to turn on this unit.
on the TV and switch the TV input to display
2 Turn
the video from this unit.
on the subwoofer and set the volume to half.
3 Turned
If the cross-over frequency is adjustable, set it to
maximum.
VOLUME
MIN
MAX
YPAO microphone
Listening position
Ear height
CROSSOVER/
HIGH CUT
MIN
MAX
Place the YPAO microphone at ear
height in your listening position. We
recommend using a tripod to adjust the
height. You can use the tripod screws to
fix the microphone in place.
En
36
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
MAIN
ZONE 2
The following screen appears on the TV.
CODE SET
SOURCE RECEIVER
• If you perform the single measure, you will be able to enjoy surround sound at that
position with optimized speaker settings. If you perform the multi measure, the
speaker settings will be optimized for you to enjoy surround sound in a wider
space.
HDMI
1
2
3
4
7
V-AUX
5
6
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
AV
Single measure
Multi measure
(5 listening positions)
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
• To cancel the operation, disconnect the YPAO microphone before starting
the measurement.
SCENE
BD
DVD
TV
CD
RADIO
desired, change the measuring method (multi/
5 Ifsingle).
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
Cursor keys
ENTER
DISPLAY
A
1
4
5
213
a Use the cursor keys to select “Multi Position” and press ENTER.
b Use the cursor keys to select a setting and then press ENTER.
POP-UP
MENU
TOP
MENU
MUTE
Multi measure
MODE
1
2
3
5
6
7
9
0
10
Multi measure
(1 listening position + 4 circumferences)
(2 listening positions + front/back)
2
3 1 5
4
3
1 2
4
4
8
ENT
TV
INPUT
TV VOL
TV CH
HDMI OUT
MUTE
Settings
Yes
Select this if your listening position is variable or you
will enjoy surround sound with your company. You can
perform the measurement at up to 8 positions to
optimize the speaker settings to suit all of those
positions (multi measure).
No (default)
Select this if your listening position is fixed in one
position. You will perform the measurement only once
to optimize the speaker settings suit to the position
(single measure).
Now all preparations are complete. See the following page to start
the measurement.
When “Multi Position” is set to “Yes”:
“Measuring at multiple listening positions (multi measure)” (p.39)
When “Multi Position” is set to “No”:
“Measuring at one listening position (single measure)” (p.38)
En
37
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
MAIN
ZONE 2
Measuring at one listening position
(single measure)
CODE SET
SOURCE RECEIVER
save the measurement results, use the cursor
3 To
keys to select “SAVE” and press ENTER.
HDMI
When “Multi Position” is set to “No”, follow the procedure below to
make the measurement.
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
• YPAO measurement is not performed correctly when any obstacles are in the
room.
PRESET
TUNING
• During the measuring process (about 3 minutes), keep stuff in the corners or
remove it from the room.
AV
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
SUR. DECODE STRAIGHT
start the measurement, use the cursor keys to
1 To
select “Measure” and press ENTER.
ENHANCER PURE DIRECT
SCENE
BD
DVD
TV
CD
The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
POP-UP
MENU
MUTE
MODE
Now optimization of the speaker settings is complete.
• To cancel the measurement, press RETURN.
The following screen appears on the TV when the
measurement finishes.
1
2
3
4
5
6
7
8
9
0
10
• To finish the measurement without saving the result, select “CANCEL”.
4 Disconnect the YPAO microphone from this unit.
Cursor keys
ENTER
RETURN
DISPLAY
A
TOP
MENU
The corrected speaker settings are applied.
RADIO
Caution
• Since the YPAO microphone is sensitive to heat, do not place the microphone
in any place where it will be subjected to direct sunlight or high temperatures
(top of an AV equipment, etc).
ENT
TV
INPUT
TV VOL
TV CH
HDMI OUT
MUTE
• If any error message (such as E-1) or warning message (such as W-1)
appears, see “Error messages” (p.41) or “Warning messages” (p.42).
• To check the measurement results, select “Result”. For details, see
“Checking the measurement results” (p.40).
the cursor keys to select “Save/Cancel” and
2 Use
press ENTER.
En
38
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
MAIN
ZONE 2
Measuring at multiple listening positions
(multi measure)
CODE SET
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
When “Multi Position” is set to “Yes”, follow the procedure below to
make the measurement.
AV
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
MEMORY
the measurement at all listening position are
3 Ifmade,
use the cursor keys to select “CANCEL” and
press ENTER.
If you have made the measurement at 8 listening positions,
the following screen appears automatically.
• YPAO measurement is not performed correctly when any obstacles are in the
room.
• During the measuring process, keep stuff in the corners or remove it from the
room. It takes about 10 minutes to make the measurement at 8 listening positions.
SUR. DECODE STRAIGHT
MOVIE
MUSIC
SLEEP
PARTY
BD
DVD
TV
• If any error message (such as E-1) or warning message (such as W-1) appears,
see “Error messages” (p.41) or “Warning messages” (p.42).
ENHANCER PURE DIRECT
start the measurement, use the cursor keys to
1 To
select “Measure” and press ENTER.
SCENE
CD
RADIO
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
POP-UP
MENU
TOP
MENU
Cursor keys
ENTER
RETURN
DISPLAY
A
The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.
MUTE
MODE
• To cancel the measurement, press RETURN.
1
2
3
4
5
6
7
8
9
0
10
The following screen appears on the TV when the
measurement at the first position finishes.
ENT
• To check the measurement results, select “Result”. For details, see
“Checking the measurement results” (p.40).
the cursor keys to select “Save/Cancel” and
4 Use
press ENTER.
save the measurement result, use the cursor
5 To
keys to select “SAVE” and press ENTER.
TV
INPUT
TV VOL
TV CH
HDMI OUT
MUTE
the YPAO microphone to the next listening
2 Move
position and press ENTER.
Repeat step 2 until the measurement at all listening
positions (up to 8) are made.
The corrected speaker settings are applied.
• To finish the measurement without saving the result, select “CANCEL”.
6 Disconnect the YPAO microphone from this unit.
Now optimization of the speaker settings is complete.
En
39
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
MAIN
ZONE 2
Size
Distance
Distance from the listening position to each speaker
Level
Output level adjustment for each speaker
Caution
HDMI
1
Size of each speaker (cross-over frequency of the
subwoofer)
Large: The speaker can reproduce low-frequency
signals effectively.
Small: The speaker cannot reproduce low-frequency
signals effectively.
CODE SET
SOURCE RECEIVER
2
3
4
7
V-AUX
5
6
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
• Since the YPAO microphone is sensitive to heat, do not place the microphone
in any place where it will be subjected to direct sunlight or high temperatures
(top of an AV equipment, etc).
AV
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
BD
DVD
TV
Checking the measurement results
You can check the YPAO measurement results.
the measurement, use the cursor keys to
1 After
select “Result” and press ENTER.
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
• A speaker with any problem is indicated with a red-boxed message.
SCENE
CD
RADIO
ON SCREEN
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
POP-UP
MENU
TOP
MENU
Cursor keys
ENTER
RETURN
DISPLAY
A
• You can also select “Result” from “Auto Setup” (p.89) in the “Setup” menu. In
this case, the previous measurement results are displayed.
The following screen appears.
Reloading the previous YPAO adjustments
MUTE
When the speaker settings you have configured manually are not
suitable, follow the procedure below to discard the manual settings
and reload the previous YPAO adjustments.
MODE
1
2
3
4
5
6
7
8
9
0
10
1
2
ENT
TV
INPUT
TV VOL
TV CH
finish checking the results and return to the
3 To
previous screen, press RETURN.
3
HDMI OUT
MUTE
the “Setup” menu, select “Speaker”, “Auto
1 InSetup”
and then “Result” (p.88).
the cursor keys to select “Setup Reload” and
2 Use
press ENTER.
1 Measurement result items
2 Measurement result details
3 The number of measured positions (when multi
measure is performed)
2 Use the cursor keys to select an item
Wiring
Polarity of each speaker
Normal: The speaker cable is connected with the
correct polarity (+/-).
Reverse: The speaker cable may be connected with
the reversed polarity (+/-).
3 To exit from the menu, press ON SCREEN.
En
40
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
Error messages
If any error message is displayed during the measurement, resolve the problem and perform YPAO again.
Error message
Cause
Remedy
E-1: No Front SP
Front speakers are not detected.
E-2: No Sur. SP
Either of surround speakers is not detected.
E-3: No F.PRNS SP
Either of presence speakers is not detected.
E-4: SBRSBL
A surround back speaker is connected to the R side only.
When using only one surround back speaker, you need to connect it to the SINGLE jack (L side). Follow the
on-screen instructions to exit YPAO, turn off this unit, and then reconnect the speaker.
E-5: Noisy
The noise is too loud.
Keep the room quiet and follow the on-screen instructions to start the measurement again. If you select
“PROCEED”, the measurement starts again on the condition this unit ignores the noisy error even if noises
are detected.
E-6: Check Sur.
Any surround back speaker is connected while no surround
speakers are connected.
Surround speakers should be connected when using surround back speakers. Follow the on-screen
instructions to exit YPAO, turn off this unit, and then reconnect the speakers.
E-7: No MIC
The YPAO microphone has been removed.
Connect the YPAO microphone to the YPAO MIC jack firmly and follow the on-screen instructions to start the
measurement again.
E-8: No Signal
The YPAO microphone cannot detect test tones.
Connect the YPAO microphone to the YPAO MIC jack firmly and follow the on-screen instructions to start the
measurement again. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service
center.
E-9: User Cancel
The measurement has been canceled.
Follow the on-screen instructions to start the measurement again. To cancel the measurement, select “EXIT”.
E-10: Internal Error
An internal error has occurred.
Follow the on-screen instructions to exit YPAO, turn off and on this unit. If this error occurs repeatedly,
contact the nearest authorized Yamaha dealer or service center.
Follow the on-screen instructions to exit YPAO, turn off this unit, and then check the speaker connections.
En
41
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
Warning messages
Even if any warning message is displayed after the measurement, you can save the measurement results by following on-screen instructions.
However, we recommend you perform YPAO again to use this unit with the optimal speaker settings.
Warning message
Cause
Remedy
W-1: Out of Phase
Any of the speaker cables may be connected with the
reversed polarity (+/-).
Select “Wiring” in “Result” (p.40) and check the cable connections (+/-) of the speaker indicated with
“Reverse”. If the speaker is connected incorrectly, turn off this unit and then reconnect the speaker cable.
Depending on the type of speakers or room environment, this message may appear even if the speakers are
connected correctly.
W-2: Over Distance
Any of the speakers is placed more than 24 m from the
listening position.
Select “Distance” in “Result” (p.40) and move the speaker indicated with “>24.0m (>80.0ft)” within 24 m of
the listening position.
W-3: Level Error
There are a significant volume differences between the
speakers.
Check the use environment and cable connections (+/-) of each speaker, and the volume of the subwoofer.
We recommend using the same speakers or speakers with as similar specifications as possible.
En
42
MAIN
ZONE 2
PLAYBACK
CODE SET
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
AV
INFO
Basic playback procedure
Input selection keys
MEMORY
SUR. DECODE STRAIGHT
MOVIE
MUSIC
SLEEP
PARTY
BD
DVD
TV
ENHANCER PURE DIRECT
SCENE
CD
RADIO
ON SCREEN
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
VOLUME
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
MUTE
Cursor keys
ENTER
MODE
1
2
3
5
6
7
9
0
10
on external devices (TV, BD/DVD player, etc.)
1 Turn
connected to this unit.
the input selection keys to select an input
2 Use
source.
playback on the external device, or select a
3 Start
radio station.
4
8
Refer to the instruction manual of the external device.
For details on the following operations, see the
corresponding pages.
- Listening to FM/AM radio (p.50)
- Playing back iPod music/videos (p.54)
- Playing back music via Bluetooth (p.59)
- Playing back music stored on a USB storage device (p.61)
- Playing back music stored on PCs (p.64)
- Listening to Internet radio (p.67)
4 Press VOLUME to adjust the volume.
ENT
TV
INPUT
TV VOL
MUTE
TV CH
HDMI OUT
HDMI OUT
Selecting an HDMI output jack
1 Press HDMI OUT to select an HDMI OUT jack.
Each time you press the key, the HDMI OUT jack to be
used for signal output switches.
VOL.
HDMIOUT1+2
HDMI OUT 1+2
HDMI OUT 1
SW
C
L
R
SL
SR
SBL
SBR
Outputs the same signal at both the HDMI OUT 1
and HDMI OUT 2 jacks.
HDMI OUT 2
Outputs the signals at the selected HDMI OUT
jack.
HDMI OUT Off
Does not output the signals at the HDMI OUT jacks.
• You can also select an HDMI output jack by selecting a scene (p.44).
• When “HDMI OUT 1+2” is selected, this unit outputs video signals at the
highest resolution that both TVs connected to this unit support. (For
example, if you have connected a 1080p TV to the HDMI OUT 1 jack, and a
720p TV to the HDMI OUT 2 jack, this unit outputs 720p video signals.)
• To mute the audio output, press MUTE. Press MUTE again to unmute.
• To adjust treble/bass parts of sound, use the “Option” menu or TONE
CONTROL on the front panel (p.78).
On-screen input selection
a Press ON SCREEN.
b Use the cursor keys to select “Input” and press ENTER.
c Use the cursor keys to select a desired input source and press
ENTER.
En
43
MAIN
ZONE 2
CODE SET
SOURCE RECEIVER
SOURCE/RECEIVER
Selecting the input source and favorite settings at once (SCENE)
HDMI
1
2
3
4
5
6
7
V-AUX
The SCENE function allows you to select the assigned input source,
sound program, Compressed Music Enhancer on/off, and HDMI
output jack at once.
AV
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
1 Press SCENE.
The input source and settings registered to the
corresponding scene are selected. This unit turns on
automatically when it is in standby mode.
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
SCENE
BD
DVD
TV
CD
RADIO
VOLUME
ENTER
RETURN
POP-UP
MENU
2
3
6
7
9
0
10
8
HDMI1
MOVIE (Drama) Off
HDMI OUT 1+2
TV
AV4
STRAIGHT
On
HDMI OUT 1+2
CD
AV3
STRAIGHT
Off
HDMI OUT 1+2
TUNER
MUSIC
(7ch Stereo)
On
HDMI OUT 1+2
ENT
On-screen scene selection
INPUT
TV CH
the following operations to prepare the
1 Perform
settings you want to assign to a scene.
- Select an input source (p.43)
- Select a sound program (p.45)
- Enable/disable Compressed Music Enhancer (p.49)
- Select an HDMI output jack (p.43)
down the desired SCENE key until “SET
2 Hold
Complete” appears on the front display.
HDMI output
jack
BD/DVD
4
TV
TV VOL
Compressed
Music
Enhancer
Input
RADIO
5
Sound
program
SCENE
MUTE
MODE
1
Cursor keys
ENTER
DISPLAY
A
TOP
MENU
By default, the following settings are registered for each scene.
ON SCREEN
OPTION
ON SCREEN
SCENE
Configuring scene assignments
you want to control the corresponding playback
3 Ifdevice
after selecting the scene, hold down the
corresponding SCENE key and input selection key
together for more than 3 seconds.
Once the setting is completed successfully, SOURCE/
RECEIVER blinks twice.
HDMI OUT
MUTE
a Press ON SCREEN.
b Use the cursor keys to select “Scene” and press ENTER.
c Use the cursor keys to select a desired scene and press
ENTER.
• If you have not registered the remote control code of the playback device
yet, see “Setting the remote control codes for playback devices” (p.107) to
register it.
• You can also configure scene assignments in the “Scene” menu (p.83).
• You can start playback of external devices connected to this unit via HDMI
or a Yamaha product connected to the REMOTE OUT jack, in conjunction
with a scene selection (SCENE link playback). To enable the SCENE link
playback, specify the device type in “Device Control” (p.84) in the “Scene”
menu.
En
44
MAIN
ZONE 2
CODE SET
Selecting the sound mode
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
PRESET
TUNING
This unit is equipped with a variety of sound programs and
surround decoders that allow you to enjoy playback sources with a
favorite sound mode (sound field effect, stereo playback, etc).
AV
FM
AM
INFO
MEMORY
SUR. DECODE STRAIGHT
MOVIE
MUSIC
SLEEP
PARTY
BD
DVD
TV
ENHANCER PURE DIRECT
SCENE
CD
RADIO
VOLUME
ENTER
RETURN
DISPLAY
A
POP-UP
MENU
TOP
MENU
MOVIE
MUSIC
SUR.DECODE
STRAIGHT
ENHANCER
PURE DIRECT
Press MOVIE repeatedly.
Press MUSIC repeatedly.
3
5
6
7
9
0
10
• You can change the settings of the surround programs and surround decoders in
the “Sound Program” menu (p.85).
• The sound mode can be applied separately to each input source.
Selecting a surround decoder (p.48)
ENTER
Press SUR.DECODE repeatedly.
• When you play back audio signals with sampling frequency of higher than 96 kHz
or DTS Express sources, the straight decode mode (p.48) is automatically
selected.
Switching to the straight decode mode (p.48)
• You can check which speakers are currently outputting sound with the speaker
indicators on the front panel (p.9) or the “Audio Signal” screen in the “Information”
menu (p.101).
4
8
ENT
Switching to the Pure Direct mode (p.49)
Press PURE DIRECT.
TV
INPUT
TV VOL
c Use the cursor keys to select a sound program/surround
decoder and press ENTER.
Cursor keys
Press STRAIGHT.
2
b Use the cursor keys to select “Sound Program” and press
ENTER.
MUTE
MODE
1
a Press ON SCREEN.
Selecting a sound program suitable for music or stereo
playback (p.47)
ON SCREEN
OPTION
ON SCREEN
Selecting a sound program suitable for movies (p.46)
On-screen sound program/surround decoder selection
TV CH
HDMI OUT
MUTE
Enable Compressed Music Enhancer (p.49)
Press ENHANCER.
En
45
Enjoying sound field effects (CINEMA DSP)
Drama
This program features stable reverberations that match a wide range of
movie genres from serious dramas to musicals and comedies. The
reverberations are modest but offer an optimum 3D feeling, reproducing
effects tones and background music softly but cubically around clear words
and center positioning in a way that does not fatigue the listener even after
long hours of viewing.
Mono Movie
This program is provided for reproducing monaural video sources such as a
classic movie in an atmosphere of a good old movie theater. The program
produces the optimum expansion and reverberation to the original audio to
create a comfortable space with a certain sound depth.
This unit is equipped with a variety of sound programs that utilize Yamaha's original
DSP technology (CINEMA DSP). It allows you to easily create sound fields like actual
movie theaters or concert halls in your room.
Sound program category
“CINEMA DSP” lights up
❑ ENTERTAINMENT
VOL.
Sci-Fi
SW
C
R
L
SL
SR
SBL
SBR
Sound program
Sports
This program allows the listeners to enjoy stereo sport broadcasts and
studio variety programs with enriched live feeling. In sports broadcasts, the
voices of the commentator and sportscaster are positioned clearly at the
center while the atmosphere of the stadium expands in an optimal space to
offer the listeners a feeling of presence in the stadium.
Action Game
This program is suitable for action games such as car racing, fighting
games and FPS games. The reality of, and emphasis on, various effects
makes the player feel like they are right in the middle of the action, allowing
for greater concentration. Use this program in combination with
Compressed Music Enhancer for a more dynamic and strong sound field.
Roleplaying Game
This program is suitable for role-playing and adventure games. This
program adds depth to the sound field for natural and realistic reproduction
of background music, special effects and dialog from a wide variety of
scenes. Use this program in combination with Compressed Music Enhancer
for a more clear and spatial sound field.
Music Video
This program offers an image of a concert hall for live performance of pop,
rock and jazz music. The listener can indulge oneself in a hot live space
thanks to the presence sound field that emphasizes the vividness of vocals
and solo play and the beat of rhythm instruments, and to the surround
sound field that reproduces the space of a big live hall.
• When you play back DTS-HD sources, the DTS decoder is automatically selected.
■ Sound programs suitable for movies (MOVIE)
The following sound programs are optimized for viewing video sources such as movies,
TV programs and games.
❑ MOVIE THEATER
Standard
This program creates a sound field emphasizing the surround feeling
without disturbing the original acoustic positioning of multi-channel audio
such as Dolby Digital and DTS. It has been designed with the concept of an
ideal movie theater, in which the audience is surrounded by beautiful
reverberations from the left, right and rear.
Spectacle
This program represents the spectacular feeling of large-scale movie
productions. It reproduces a broad theater sound field that matches
cinemascope and wider-screen movies with an excellent dynamic range
providing everything from very small sound effects to large, impressive
sounds.
Sci-Fi
This program clearly reproduces the finely elaborated sound design of the
latest science fiction and special effects-featuring movies. You can enjoy a
variety of cinematographically created virtual spaces reproduced with clear
separation between dialog, sound effects and background music.
Adventure
This program is ideal for precisely reproducing the sound design of action
and adventure movies. The sound field restrains reverberations but puts
emphasis on reproducing a powerful space expanded widely to the left and
right. The reproduced depth is also restrained relatively to ensure the
separation between audio channels and the clarity of the sound.
En
46
■ Sound programs suitable for music/stereo playback
(MUSIC)
The following sound programs are optimized for listening to music sources such as
music CDs.
You can also select stereo playback.
❑ CLASSICAL
Hall in Munich
This program simulates a concert hall with approximately 2500 seats in
Munich, using stylish wood for the interior finishing as normal standards for
European concert halls. Fine, beautiful reverberations spread richly,
creating a calming atmosphere. The listener's virtual seat is at the center left
of the arena.
Hall in Vienna
This program simulates an approximately 1700-seat, middle-sized concert
hall with a shoebox shape that is traditional in Vienna. Pillars and ornate
carvings create extremely complex reflections from all around the audience,
producing a very full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling like an
audience hall in a palace. It offers pleasant reverberations that are suitable
for courtly music and chamber music.
❑ LIVE/CLUB
Cellar Club
This program simulates a live house with a low ceiling and homey
atmosphere. A realistic, live sound field features powerful sound as if the
listener is in a row in front of a small stage.
The Roxy Theatre
This program creates the sound field of a rock music live house in Los
Angeles, with approximately 460 seats. The listener's virtual seat is at the
center left of the hall.
The Bottom Line
This program creates the sound field at stage front in The Bottom Line, a
famous New York jazz club once. The floor can seat 300 people to the left
and right in a sound field offering real and vibrant sound.
❑ STEREO
2ch Stereo
Use this program to mix down multi-channel sources to 2 channels. When
multi-channel signals are input, they are down mixed to 2 channels and
output from the front speakers (this program does not utilizes CINEMA DSP).
7ch Stereo
Use this program to output sound from all speakers. When you playback
multi-channel sources, this unit down-mixes the source to 2 channels, and
then outputs the sound from all speakers. This program creates a larger
sound field and is ideal for background music at parties, etc.
En
47
MAIN
ZONE 2
CODE SET
SOURCE RECEIVER
■ Enjoying stereoscopic sound fields
(CINEMA DSP 3D)
Enjoying unprocessed playback
CINEMA DSP 3D enables to create a natural stereoscopic sound
field in your room.
CINEMA DSP 3D functions when both of the following conditions
are met.
- One of the sound programs (except 2ch Stereo and 7ch Stereo) is
selected (p.46).
- “CINEMA DSP 3D Mode” (p.78) in the “Option” menu is set to
“On” (default).
■ Enjoying unprocessed sounds in original
channels (straight decode)
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
BD
DVD
TV
AV
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
“CINEMA DSP
SCENE
CD
SUR.DECODE
STRAIGHT
3”
lights up
RADIO
VOL.
OPTION
ON SCREEN
3
VOLUME
ENTER
RETURN
Hall in Vienna
SW
PL
PR
C
R
L
SL
SR
SBL
SBR
DISPLAY
A
You can play back input sources without any sound field effect
processing.
When the straight decode mode is enabled, each speaker
produces each channel audio signal directly (without sound field
processing). When you play back 2-channel sources such as CD,
stereo sound is heard from the front speakers. When you play back
multi-channel sources, this unit produces unprocessed multichannel sounds.
1 Press STRAIGHT.
Each time you press the key, the straight decode mode is
enabled or disabled.
VOL.
POP-UP
MENU
TOP
MENU
MUTE
MODE
1
2
3
4
5
6
7
8
9
0
10
ENT
TV
INPUT
TV VOL
MUTE
TV CH
HDMI OUT
• We recommend using presence speakers to have a full effect of the stereoscopic
sound fields. However, this unit creates Virtual Presence Speaker (VPS) using the
front, center and surround speakers to produce stereoscopic sound fields even
when no presence speakers are connected.
■ Enjoying sound field effects without
surround speakers (Virtual CINEMA DSP)
If you select one of the sound programs (except 2ch Stereo and
7ch Stereo) when no surround speakers are connected, this unit
automatically creates the surround sound field using the front-side
speakers.
SW
C
R
L
SL
SR
SBL
SBR
STRAIGHT
■ Enjoying unprocessed multi-channel
sounds (surround decoder)
The surround decoder enables unprocessed multi-channel
playback from 2-channel sources. When a multi-channel source is
input, it works the same way as the straight decode mode.
For details on each decoder see “Glossary” (p.119).
1 Press SUR.DECODE to select a surround decoder.
Each time you press the key, the surround decoder
switches.
VOL.
ProLogic
Pro Logic
PLIIx Movie
PLII Movie
SW
C
R
L
SL
SR
SBL
SBR
Uses the Dolby Pro Logic decoder suitable for any
sources.
Uses the Dolby Pro Logic IIx decoder (or Dolby Pro
Logic II decoder) suitable for movies.
En
48
MAIN
ZONE 2
PLIIx Music
CODE SET
PLII Music
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
MEMORY
PLIIx Game
PLII Game
AV
MUSIC
SLEEP
PARTY
BD
DVD
TV
ENHANCER PURE DIRECT
SCENE
CD
RADIO
OPTION
ON SCREEN
ENHANCER
PURE DIRECT
Enjoying compressed music with enhanced
sound (Compressed Music Enhancer)
Uses the Dolby Pro Logic IIx decoder (or Dolby Pro
Logic II decoder) suitable for games.
Neo: 6 Cinema
Uses the DTS Neo: 6 decoder suitable for movies.
Neo: 6 Music
Uses the DTS Neo: 6 decoder suitable for music.
• You cannot select the Dolby Pro Logic IIx decoders when headphones are
connected or when “Surround Back” in the “Setup” menu is set to “None”.
SUR. DECODE STRAIGHT
MOVIE
Uses the Dolby Pro Logic IIx decoder (or Dolby Pro
Logic II decoder) suitable for music.
Enjoying pure high fidelity sound
(Pure Direct)
Compressed Music Enhancer improves the sound enhancer near
to the original depth and width of compressed music sources. This
function can be used along with any other sound modes.
1 Press ENHANCER.
Each time you press the key, Compressed Music Enhancer
is enabled or disabled.
“ENHANCER” lights up
ENHANCER
VOLUME
ENTER
RETURN
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
MODE
When the Pure Direct mode is enabled, this unit plays back the
selected source with the least circuitry to reduce the electrical
noise from other circuitry (front display, etc). It allows you to enjoy
Hi-Fi sound quality.
1 Press PURE DIRECT.
1
2
3
4
5
6
7
8
9
0
10
SW
C
R
L
SL
SR
SBL
SBR
• Compressed Music Enhancer does not work on the following audio sources.
Each time you press the key, the Pure Direct mode is
enabled or disabled.
ENT
Enhancer On
VOL.
- Signals of which sampling rate is over 48kHz
- High-definition streaming audio
VOL.
TV
INPUT
TV VOL
MUTE
TV CH
HDMI OUT
PUREDIRECT
SW
C
L
R
SL
SR
SBL
SBR
• You can also use “Enhancer” (p.79) in the “Option” menu to enable/disable
Compressed Music Enhancer.
• When the Pure Direct mode is enabled, the following functions are not available.
- Selecting sound programs
- Adjusting the tone control
Enjoying surround sound with headphones
(SILENT CINEMA)
- Operating the on-screen menu
- Viewing information on the front display (when not operated)
You can enjoy surround or sound field effects like a multi-channel
speaker system with stereo headphones by connecting the
headphones to the PHONES jack and selecting a sound program
or a surround decoder.
En
49
MAIN
ZONE 2
CODE SET
Listening to FM/AM radio
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
You can tune into a radio station by specifying its frequency or
selecting from registered radio stations.
AV
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
TUNING
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
TUNER
FM
AM
MEMORY
PRESET
TUNING
SCENE
BD
DVD
TV
CD
RADIO
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
Selecting a frequency for reception
TUNER to select “TUNER” as the input
1 Press
source.
2 Press FM or AM to select a band.
VOL.
DISPLAY
A
POP-UP
MENU
TOP
MENU
FM87.50MHz
MUTE
MODE
MODE
1
2
3
5
6
7
9
0
10
4
8
ENT
TV
INPUT
TV VOL
MUTE
• If you cannot have a good reception on the radio, adjust the direction of the FM/
AM antennas.
TV CH
HDMI OUT
Numeric keys
ENT
SW
C
R
L
SL
SR
SBL
SBR
3 Use the following keys to set a frequency.
TUNING: Increase/decrease the frequency.
Hold down the key for about a second to search the station
automatically.
Numeric keys: Enter a frequency directly. For example, to
select 98.50 MHz, press “9”, “8”, “5” and “0” (or ENT).
VOL.
Registering favorite radio stations (preset)
You can register up to 40 radio stations as presets. Once you
registered stations, you can easily tune into those stations by
selecting the preset number.
• You can automatically register FM radio stations with strong signals using “Auto
Preset” (p.53).
■ Registering a radio station
Select a radio station manually and register it to a preset number.
“Selecting a frequency for reception” (p.50)
1 Follow
to tune into a desired radio station.
2 Hold down MEMORY for more than 2 seconds.
The radio station will be registered to the preset number
“01” for the first time. After that, it will be registered to an
empty preset number (next to the lastly-registered preset
number).
VOL.
STEREO
TUNED
01:FM98.50MHz
STEREO
TUNED
FM98.50MHz
SW
C
R
L
SL
SR
SBL
SBR
“TUNED” lights up when a signal is received from a radio
station.
“STEREO” also lights up when a stereo signal is received.
• “Wrong Station!” appears when you enter a frequency that is out of
receivable range
SW
C
R
L
SL
SR
SBL
SBR
Preset number
• To select a preset number to which the station will be registered, press
MEMORY once after tuning into a desired radio station, use PRESET or
numeric keys to select a preset number, and then press MEMORY again.
VOL.
STEREO
TUNED
02:Empty
SW
C
R
L
SL
SR
SBL
SBR
“Empty” (not in use) or frequency currently registered
• You can switch between stereo and monaural for FM radio reception by
pressing MODE. When signal reception for FM radio station is unstable,
switching to monaural may improve it.
En
50
MAIN
ZONE 2
■ Selecting a preset station
CODE SET
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
AV
TUNER
PRESET
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
BD
DVD
TV
Radio Data System tuning
Tune into a registered radio station by selecting the preset number.
SOURCE RECEIVER
SUR. DECODE STRAIGHT
INFO
TUNER to select “TUNER” as the input
1 Press
source.
PRESET repeatedly to select a desired radio
2 Press
station.
You can also enter a preset number (01 to 40) directly by
using the numeric keys after pressing PRESET once.
PRESET
VOL.
STEREO
TUNED
01:FM98.50MHz
ENHANCER PURE DIRECT
SW
C
L
R
SL
SR
SBL
SBR
SCENE
CD
■ Displaying the Radio Data System
information
into a desired Radio Data System broadcasting
1 Tune
station.
RADIO
OPTION
ON SCREEN
• “No Presets” appears when no radio stations are registered.
VOLUME
ENTER
RETURN
• “Wrong Num.” appears when an invalid number is entered.
DISPLAY
A
• “Empty” appears when a preset number not in use is entered.
POP-UP
MENU
TOP
MENU
MUTE
• We recommend using “Auto Preset” to tune into the Radio Data System
broadcasting stations (p.53).
2 Press INFO.
Each time you press the key, the display item switches.
MODE
• To clear preset stations, use “Clear Preset” or “Clear All Preset” (p.53).
1
2
3
4
5
6
7
8
9
0
10
TV VOL
TV CH
Numeric keys
INFO
HDMI OUT
VOL.
STEREO
TUNED
SW
C
L
R
SL
SR
SBL
SBR
ProgramType
Item name
ENT
TV
INPUT
MUTE
Radio Data System is a data transmission system used by FM
stations in many countries. This unit can receive various Radio Data
System data such as “Program Service”, “Program Type,” “Radio
Text” and “Clock Time” when tuning into a Radio Data System
broadcasting station.
About 3 seconds later, the corresponding information
appears.
9850
VOL.
STEREO
TUNED
CLASSICS
SW
C
L
R
SL
SR
SBL
SBR
Information
Program Service Program service name
Program Type
Type of the current program
Radio Text
Information on the current program
Clock Time
Current time
DSP Program
Sound mode name
Audio Decoder
Decoder name
Frequency
Frequency
En
51
MAIN
ZONE 2
Operating the radio on the TV
CODE SET
SOURCE RECEIVER
• “Program Service”, “Program Type”, “Radio Text” and “Clock Time” do not
appear when the radio station does not provide the Radio Data System
service.
HDMI
1
2
5
6
3
4
7
V-AUX
AV
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
TUNER
When “TUNER” is selected as the input source, this unit
automatically receives traffic information. To enable this function,
follow the procedure below to set the traffic information station.
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
SCENE
BD
DVD
TV
CD
RADIO
OPTION
ON SCREEN
OPTION
VOLUME
ENTER
RETURN
POP-UP
MENU
TOP
MENU
Cursor keys
ENTER
RETURN
DISPLAY
A
MUTE
■ Receiving traffic information
automatically
“TUNER” is selected as the input source,
1 When
press OPTION.
the cursor keys to select “Traffic Program”
2 Use
(TrafficProgram) and press ENTER.
The traffic information station search will start in 5 seconds.
Press ENTER again to start the search immediately.
MODE
1
2
3
4
5
6
7
8
9
0
10
ENT
• To search upward/downward from the current frequency, press the cursor
keys ( / ) while “READY” is displayed.
• To cancel the search, press RETURN.
• Texts in parentheses denote indications on the front display.
TV
INPUT
TV VOL
MUTE
TV CH
HDMI OUT
The following screen appears for about 3 seconds when the
search finishes.
FINISH
VOL.
STEREO
TUNED
TPFM101.30MHz
SW
C
L
R
SL
SR
SBL
SBR
You can view the radio information or select a radio station on the TV.
TUNER to select “TUNER” as the input
1 Press
source.
The playback screen is displayed on the TV.
■ Playback screen
1
2
3
1 Radio station information
Displays the information of the selected radio station such as the selected
band (FM/AM) and frequency.
When tuning into a Radio Data System broadcasting station (p.51), the
Radio Data System information (“Program Service”, “Program Type,”
“Radio Text” and “Clock Time”) is also displayed.
2 TUNED/STEREO indicators
“TUNED” lights up when a signal is received from a radio station.
“STEREO” lights up when a stereo signal is received.
3 Operation menu
Use the cursor keys to select an item and press ENTER to confirm the
selection.
To close the submenu, press RETURN.
Traffic information station (frequency)
• “TP Not Found” appears for about 3 seconds when no traffic information
stations are found.
En
52
MAIN
ZONE 2
Menu
CODE SET
Submenu
Function
■ Browse screen
SOURCE RECEIVER
FM
Switches to FM/AM.
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
1
AM
Tuning (+/-)
Selects a frequency.
Auto (+/-)
Selects a radio station automatically.
Memory
Registers the selected station as
presets.
Direct
Enters a frequency directly.
AV
TUNER
PHONO
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
BD
DVD
TV
NET
USB
PRESET
TUNING
Manual Tuning
SUR. DECODE STRAIGHT
Moves to the browse screen (preset
station list).
Screen Off
Closes the screen display and shows
the background. Press one of the
menu operation keys to redisplay it.
ENHANCER PURE DIRECT
SCENE
CD
RADIO
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
Browse
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
MODE
Menu operation keys
Cursor keys
ENTER
RETURN
3
2
1 Preset station list
Displays the list of preset stations. Use the cursor keys to select a preset
station and press ENTER to tune into it.
2 Preset number
3 Operation menu
Use the cursor keys to select an item and press ENTER to confirm the
selection.
To close the submenu, press RETURN.
Menu
1
2
3
5
6
7
9
0
10
4
Function
Memory
Registers the current station to the
preset number selected in the list.
Auto Preset
Automatically registers FM radio
stations with strong signals (up to 40
stations).
Clear Preset
Clear the preset station selected in the
list.
Clear All Preset
Clear all the preset stations.
8
ENT
Utility
TV
INPUT
TV VOL
Submenu
TV CH
HDMI OUT
MUTE
1 Page Up
1 Page Down
Moves to the previous/next page of
the list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows
the background. Press one of the
menu operation keys to redisplay it.
En
53
Playing back iPod music/videos
You can play back iPod music/videos on this unit using a USB cable supplied with iPod,
an optional Yamaha iPod dock (such as YDS-12) or an optional Yamaha iPod wireless
system (YID-W10).
Connecting an iPod
■ Using a USB cable
• This manual describes both the “iPod” and “iPhone” as the “iPod”. “iPod” means both “iPod” and “iPhone”
unless the explanation describes exceptions.
• Some features may not be compatible depending on the model or software version of an iPod, or the model
of an iPod dock.
Connect your iPod to this unit with the USB cable supplied with the iPod.
1 Connect the USB cable to the iPod.
Functional differences depending on the way of connection
USB cable supplied
with iPod
Yamaha iPod universal
dock
(such as YDS-12)
Yamaha iPod wireless
system
(YID-W10)
Audio output
✓
✓
✓
Video output
✓*
✓
—
Operation with
remote control of
the unit
✓
✓
—
Operation with
iPod
✓
✓
✓
Operation on TV
screen
✓
✓
—
Charging
✓
✓
✓
Charging during
standby mode
—
✓
✓
2 Connect the USB cable to the USB jack.
This unit (front)
INPUT
Supported iPod
iPod touch
iPod nano (2 gen. to
6 gen.)
iPod classic
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
iPod touch
iPod nano
iPod classic
iPod with video
iPod with color display
iPod with click wheel
iPod mini
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
iPod touch
iPod nano
iPod classic
iPod with video
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
BD/DVD
PHONES
SILENT CINEMA
USB
Connected
USB
TONE CONTROL
PROGRAM
iPod/iPhone
VOL.
SW
C
L
R
SL
SR
SBL
SBR
* Requires an Apple Composite AV Cable (not supplied). Connect the USB and composite video plugs of the
Apple Composite AV cable to the USB jack and VIDEO AUX (VIDEO) jack of this unit and set “Video Out
(USB)” (p.82) in the “Input” menu to “V-AUX”.
En
54
■ Using an iPod dock
Refer to the instruction manual of the iPod dock in addition.
1
DOCK
DOCK
When this unit is in standby mode, connect the iPod
dock to the DOCK jack.
NETWORK
HDMI 1
HDMI OUT
2
1
(BD/DVD)
ARC
PHONO
COMPONENT
VIDEO
Locate the iPod dock at the distance as far as from this unit.
ANTENNA
L
AM
COMPONENT
VIDEO
FM
REMOT
PR
IN
PR
R
GND
S VIDEO
OUT
75Ω
PB
PB
VIDEO
VIDEO
Y
Y
MONITOR OUT
+1
0.1A
TRIGGER O
L
DOCK
DOCK
R
NETWORK
HDMI 1
HDMI OUT
2
1
(BD/DVD)
ARC
12
A
PHONO
COMPONENT
VIDEO
ANTENNA
L
AM
REMOT
PR
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
OPTICAL
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
This unit (rear)
COMPONENT
VIDEO
FM
IN
PR
R
GND
S VIDEO
OUT
75Ω
PB
PB
VIDEO
Y
MONITOR OUT
+1
0.1A
TRIGGER O
L
R
OPTICAL
COAXIAL
COAXIAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
OPTICAL
AV 5
AV 6
AV
OUT
AUDIO 1
iPod wireless system (receiver)
VIDEO
Y
iPod dock
3
B
AUDIO 2
This unit (rear)
your iPod to the iPod dock and turn on this
2 Connect
unit.
• While an iPod is connected to the iPod dock, the iPod is charged. You can
select whether to charge the iPod when this unit is in standby mode using
“Standby Charge” (p.81) in the “Input” menu.
■ Using an iPod wireless system
When using an iPod wireless system, operate your iPod itself to
start playback after making a connection. Refer to the instruction
manual of the iPod wireless system in addition.
the power cable is removed from an AC wall
1 When
outlet, connect the iPod wireless system (receiver)
to the DOCK jack.
Locate the iPod wireless system (receiver) at the distance
as far as from this unit.
2 Connect the power cable to an AC wall outlet.
your iPod to the iPod wireless system
3 Connect
(transmitter).
4 On your iPod, select the content and start playback.
This unit automatically turns on and selects “DOCK” as the
input source.
• You can select whether to control this unit (power on/off, input selection and
volume adjustment) in conjunction with iPod operations using “iPod
Interlock” (p.82) in the “Input” menu. When the iPod interlock function is
disabled, turn on this unit and select the input source manually.
• While the iPod wireless system (transmitter) is placed on the iPod wireless
system (receiver), the iPod is charged. You can select whether to charge the
iPod when this unit is in standby mode using “Standby Charge” (p.81) in the
“Input” menu.
Caution
• When you use iPod controls to adjust volume, the volume may be
unexpectedly loud. This could result in damage to this unit or speakers. If the
volume suddenly increases during playback, remove the iPod from the iPod
wireless system (transmitter) immediately. To prevent this problem, we
recommend using “Max Volume” (p.94) in the “Setup” menu to set the
maximum volume level for this unit.
En
55
MAIN
ZONE 2
Playback of iPod contents
CODE SET
SOURCE RECEIVER
When using a USB cable or an iPod dock, you can control the iPod
with the menu displayed on the TV.
HDMI
1
2
3
4
7
V-AUX
5
6
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
PRESET
TUNING
■ Browse screen
1
2
3
AV
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
BD
DVD
TV
DOCK
USB
ENHANCER PURE DIRECT
SCENE
The browse screen is displayed on the TV.
RADIO
5
using a USB cable: press USB to select
1 When
“USB” as the input source.
When using an iPod dock: press DOCK to select
“DOCK” as the input source.
SUR. DECODE STRAIGHT
CD
• When using an iPod wireless system, you cannot control the iPod from the TV
screen. Operate your iPod itself to select the content and start playback.
4
1 Status indicators
Display the current shuffle/repeat settings (p.58) and playback status
(play/pause, etc).
OPTION
ON SCREEN
2 List name
VOLUME
ENTER
RETURN
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
Menu operation keys
Cursor keys
3 Contents list
Displays the list of iPod contents. Use the cursor keys to select an item
and press ENTER to confirm the selection.
ENTER
RETURN
4 Item number/total
MODE
5 Operation menu
1
2
3
4
5
6
7
8
9
0
10
ENT
TV
INPUT
TV VOL
MUTE
TV CH
HDMI OUT
* Display example (when using an iPod dock)
the cursor keys to select an item and press
2 Use
ENTER.
If a song is selected, playback starts and the playback
screen is displayed.
Use the cursor keys to select an item and press ENTER to confirm the
selection.
Menu
Function
1 Page Up
Moves to the previous/next page of the list.
1 Page Down
10 Pages Up
Moves to 10 pages forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
• To return to the previous screen, press RETURN.
• To operate the iPod itself to select a content or control playback, switch to
the simple play mode (p.57).
En
56
MAIN
ZONE 2
■ Playback screen
CODE SET
■ Operating the iPod itself or remote control
(simple play)
SOURCE RECEIVER
1
2
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
1 Press MODE to switch to the simple play mode.
AV
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
3
4
The TV menu screen turns off and iPod operations are
enabled.
To display the TV menu screen, press MODE again.
your iPod itself or the remote control to
2 Operate
start playback.
SUR. DECODE STRAIGHT
1 Status indicators
ENHANCER PURE DIRECT
Display the current shuffle/repeat settings (p.58) and playback status
(play/pause, etc).
SCENE
BD
DVD
TV
CD
RADIO
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
2 Playback information
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
Menu operation keys
Cursor keys
ENTER
RETURN
External device
operation keys
MODE
1
2
3
4
5
6
7
8
9
0
10
4 Operation menu
Use the cursor keys to select an item and press ENTER to confirm the
selection.
To close the submenu, press RETURN.
Menu
TV CH
Function
Cursor keys
Select an item.
ENTER
Confirms the selection.
RETURN
Returns to the previous screen.
Starts playback or stops playback
temporarily.
3 Album image
ENT
TV
INPUT
TV VOL
MODE
Displays the artist name, album name, song title and elapsed/remaining
time.
Use the cursor keys to select information to be scrolled.
Operational remote control
keys
HDMI OUT
Submenu
Function
External
device
operation keys
Stops playback.
Skips forward/backward.
Searches forward/backward (while holding
down).
Resumes playback from pause.
MUTE
Stops playback.
Stops playback temporarily.
Play Control
Skips forward/backward.
Searches forward/backward (by holding
down).
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu
operation keys to redisplay it.
• You can also use the external device operation keys on the remote control to
control playback.
En
57
MAIN
ZONE 2
■ Shuffle/repeat settings
CODE SET
You can configure the shuffle/repeat settings of your iPod.
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
• When using an iPod wireless system, configure the shuffle/repeat settings directly
on your iPod.
AV
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
• During simple play, configure the shuffle/repeat settings directly on your iPod, or
press MODE to display the TV menu screen and then follow the procedure below.
• Texts in parentheses denote indications on the front display.
“USB” or “DOCK” is selected as the input
1 When
source, press OPTION.
the cursor keys to select “Shuffle” (Shuffle) or
2 Use
“Repeat” (Repeat) and press ENTER.
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
SCENE
BD
DVD
TV
CD
RADIO
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
OPTION
POP-UP
MENU
TOP
MENU
Cursor keys
ENTER
RETURN
DISPLAY
A
MUTE
MODE
MODE
1
2
3
5
6
7
9
0
10
• To return to the previous screen during menu operations, press RETURN.
• Texts in parentheses denote indications on the front display.
the cursor keys (
3 Use
press ENTER.
/ ) to select a setting and
4
8
Item
ENT
TV
Setting
Function
Off (Off)
Turns off the shuffle function.
Songs
(Songs)
Plays back songs in random order. “
appears in the TV screen.
Albums
(Albums)
Plays back albums in random order. “
appears in the TV screen.
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“ 1 ” appears in the TV screen.
All (All)
Plays back all songs repeatedly. “
appears in the TV screen.
INPUT
TV VOL
MUTE
TV CH
HDMI OUT
Shuffle
(Shuffle)
Repeat
(Repeat)
”
”
”
4 To exit from the menu, press OPTION.
En
58
MAIN
ZONE 2
CODE SET
Playing back music via Bluetooth
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
AV
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
DOCK
You can play back music stored on a Bluetooth component on this
unit using a Yamaha Bluetooth wireless audio receiver (such as
YBA-10, optional). Refer to the instruction manuals of the Bluetooth
receiver and your Bluetooth component in addition.
This unit supports A2DP (Advanced Audio Distribution Profile) of
the Bluetooth profile.
MEMORY
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
SCENE
BD
DVD
TV
CD
RADIO
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
OPTION
POP-UP
MENU
TOP
MENU
MUTE
MODE
1
2
3
4
5
6
7
8
9
0
10
Cursor keys
ENTER
RETURN
DISPLAY
A
• When connecting your Bluetooth component to the Bluetooth receiver for the first
time, you need to perform “pairing” (mutual recognition for 2 Bluetooth
components). After that, you only need to establish a wireless connection between
those components to play back music via Bluetooth. “Pairing” must be performed
between each combination. So if you have several Bluetooth components, you
need to pair each of your Bluetooth components with the Bluetooth receiver.
Connecting a Bluetooth receiver
this unit is in standby mode, connect the
1 When
Bluetooth receiver to the DOCK jack.
Locate the Bluetooth receiver at the distance as far as from
this unit.
ENT
TV
INPUT
TV VOL
TV CH
DOCK
NETWORK
HDMI 1
HDMI OUT
2
1
PHONO
COMPONENT
VIDEO
ANTENNA
L
AM
• The Yamaha Bluetooth receiver (YBA-10) can be paired with up to eight Bluetooth
components. When the ninth component is paired, the pairing setting for the
component which has not been used for the longest period of time will be deleted.
• Texts in parentheses denote indications on the front display.
1 Press DOCK to select “DOCK” as the input source.
on your Bluetooth component and set it to the
2 Turn
pairing mode.
OPTION, use the cursor keys to select
3 Press
“Pairing” (Pairing), and then press ENTER.
Searching starts. If your Bluetooth component recognizes
the Bluetooth receiver, the model name (such as “YBA-10
YAMAHA”) will be displayed in the device list of your
component.
Searching...
(BD/DVD)
ARC
Be sure to perform pairing when connecting a Bluetooth
component to the Bluetooth receiver for the first time, or when the
pairing setting has been deleted.
DOCK
DOCK
HDMI OUT
MUTE
Pairing Bluetooth components
VOL.
SW PR
PL
C
L
R
SL
SR
SBL SB SBR
COMPONENT
VIDEO
FM
REMOT
PR
IN
PR
R
GND
S VIDEO
OUT
75Ω
PB
PB
VIDEO
VIDEO
Y
Y
MONITOR OUT
+1
0.1A
TRIGGER O
• To cancel the search, press RETURN.
L
• You can also start the search by holding down MEMORY instead of step 3.
(To cancel the search, press MEMORY again.)
R
OPTICAL
AV 1
Bluetooth receiver
COAXIAL
AV 2
COAXIAL
OPTICAL
(CD)
(TV)
AV 3
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
This unit (rear)
2 Turn on this unit.
En
59
MAIN
ZONE 2
the Bluetooth receiver from the device list
4 Select
and enter the pass key “0000”.
CODE SET
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
PRESET
TUNING
“Completed” appears when the pairing is complete.
DOCK
AV
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
BD
DVD
TV
Completed
• Depending on Bluetooth components, “BT connected” appears when the
pairing is complete. In this case, the wireless connection has been already
established. You just need to start playback on your Bluetooth component to
enjoy it on this unit.
ENHANCER PURE DIRECT
5 To exit from the menu, press OPTION.
SCENE
CD
RADIO
OPTION
OPTION
VOLUME
ENTER
RETURN
POP-UP
MENU
TOP
MENU
Cursor keys
ENTER
DISPLAY
A
SW
C
R
L
SL
SR
SBL
SBR
DOCK
SUR. DECODE STRAIGHT
ON SCREEN
VOL.
Establishing a wireless connection and
playing back
When the pairing is complete, follow the procedure below to
establish a wireless connection between your Bluetooth component
and the Bluetooth receiver. When the connection is established,
this unit outputs sounds played back on the Bluetooth component.
• Depending on Bluetooth components, a wireless connection is established
automatically or by operating the Bluetooth component. In this case, you can skip
steps 2 and 3 below.
• Texts in parentheses denote indications on the front display.
1 Press DOCK to select “DOCK” as the input source.
2 Press OPTION.
the cursor keys to select “Connect” (Connect)
3 Use
and then press ENTER.
MUTE
“BT connected” appears when the wireless connection is
established.
MODE
1
2
3
4
5
6
7
8
9
0
10
DOCK
BTconnected
VOL.
SW
C
R
L
SL
SR
SBL
SBR
ENT
TV
INPUT
TV VOL
TV CH
HDMI OUT
MUTE
• If the Bluetooth receiver is paired with more than one Bluetooth component,
the lastly-connected component is automatically chosen. When you cannot
establish a connection with an intended component, perform pairing again
or perform the connection operation from the intended component.
• “Not found” appears if a connection cannot be established. Check the
followings and try again.
- The Bluetooth component and Bluetooth receiver are paired.
- The Bluetooth component is turned on and the Bluetooth mode is enabled.
- The Bluetooth component is within 10 m of the Bluetooth receiver.
4 Start playback on your Bluetooth component.
• To terminate the wireless connection, select “Disconnect” (Disconnect) in
step 3.
En
60
MAIN
ZONE 2
CODE SET
Playing back music stored on a USB storage device
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
AV
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
USB
Playback of USB storage device contents
Follow the procedure below to operate the USB storage device
contents and start playback.
1 Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
MEMORY
• This unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC
and FLAC files.
SUR. DECODE STRAIGHT
MOVIE
MUSIC
SLEEP
PARTY
ENHANCER PURE DIRECT
• This unit is compatible with sampling frequency of up to 96 kHz for WAV and
FLAC files, and 48 kHz for other files.
SCENE
BD
DVD
You can play back music files stored on a USB storage device on
this unit. Refer to the instruction manuals of the USB storage device
in addition.
This unit supports USB mass storage class devices (FAT 16 or FAT
32 format, except USB HDDs).
TV
CD
RADIO
OPTION
ON SCREEN
Connecting a USB storage device
VOLUME
ENTER
RETURN
ENTER
RETURN
DISPLAY
A
POP-UP
MENU
TOP
MENU
Cursor keys
MUTE
1 Connect the USB storage device to the USB jack.
This unit (front)
MODE
PHONES
1
2
3
5
6
7
9
0
10
USB
TONE CONTROL
PROGRAM
4
8
SILENT CINEMA
• If playback is ongoing on your USB storage device, the playback screen is
displayed.
the cursor keys to select an item and press
2 Use
ENTER.
iPod/iPhone
ENT
TV
INPUT
TV VOL
TV CH
If a song is selected, playback starts and the playback
screen is displayed.
HDMI OUT
MUTE
USB
USB storage device
USB
Connected
VOL.
SW
C
L
R
SL
SR
SBL
SBR
• To return to the previous screen, press RETURN.
• Files not supported by this unit are not listed.
• If the USB storage device contains many files, it may take time to load the
files. In this case, “Loading” appears in the front display.
• You can register your favorite items as shortcuts (p.73) and access them
directly by selecting the shortcut numbers.
En
61
MAIN
ZONE 2
■ Browse screen
CODE SET
■ Playback screen
SOURCE RECEIVER
1
2
3
HDMI
1
2
3
4
7
V-AUX
5
6
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
PRESET
TUNING
AV
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
5
4
4
SUR. DECODE STRAIGHT
1 Status indicators
ENHANCER PURE DIRECT
Display the current shuffle/repeat settings (p.63) and playback status.
SCENE
BD
DVD
TV
CD
RADIO
VOLUME
ENTER
RETURN
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
Menu operation keys
Cursor keys
ENTER
RETURN
External device
operation keys
MODE
1
2
3
5
6
7
9
0
10
4
Displays the artist name, album name, song title and elapsed time.
Use the cursor keys to select information to be scrolled.
3 Contents list
Displays the list of USB storage device contents. Use the cursor keys to
select an item and press ENTER to confirm the selection.
4 Item number/total
5 Operation menu
Use the cursor keys to select an item and press ENTER to confirm the
selection.
8
4 Operation menu
Use the cursor keys to select an item and press ENTER to confirm the
selection.
To close the submenu, press RETURN.
Menu
Menu
Function
INPUT
TV CH
3 Album image
Submenu
Function
ENT
TV
TV VOL
Display the current shuffle/repeat settings (p.63) and playback status.
2 Playback information
2 List name
OPTION
ON SCREEN
1 Status indicators
HDMI OUT
1 Page Up
Moves to the previous/next page of the list.
MUTE
Stops playback.
Play
Control
Skips forward/backward.
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation
keys to redisplay it.
1 Page Down
10 Pages Up
Moves to 10 pages forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
• You can also use the external device operation keys (
remote control to control playback.
,
,
,
) on the
En
62
MAIN
ZONE 2
■ Shuffle/repeat settings
CODE SET
You can configure the shuffle/repeat settings for playback of USB
storage device contents.
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
AV
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
• The shuffle/repeat settings are shared by USB and network sources.
“USB” is selected as the input source, press
1 When
OPTION.
the cursor keys to select “Shuffle” (Shuffle) or
2 Use
“Repeat” (Repeat) and press ENTER.
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
SCENE
BD
DVD
TV
CD
RADIO
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
OPTION
ENTER
RETURN
DISPLAY
A
POP-UP
MENU
TOP
MENU
Cursor keys
MUTE
• To return to the previous screen during menu operations, press RETURN.
• Texts in parentheses denote indications on the front display.
the cursor keys (
3 Use
press ENTER.
/ ) to select a setting and
MODE
Item
1
2
3
4
5
6
7
8
9
0
10
ENT
Shuffle
(Shuffle)
Setting
Function
Off (Off)
Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order. “
” appears in
the TV screen.
Off (Off)
Turns off the repeat function.
Single
(Single)
Plays back the current song repeatedly.
“ 1 ” appears in the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly. “
” appears in the
TV screen.
TV
INPUT
TV VOL
TV CH
HDMI OUT
MUTE
Repeat
(Repeat)
4 To exit from the menu, press OPTION.
En
63
MAIN
ZONE 2
CODE SET
Playing back music stored on PCs
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
You can play back music files stored on your PC or DLNAcompatible NAS on this unit.
AV
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
Playback of PC music contents
Follow the procedure below to operate the PC music contents and
start playback.
NET
• To use this function, this unit and your PC must be connected to the network
properly (p.31). You can check whether the network parameters (IP address, etc.)
are properly assigned to this unit in “Network” (p.102) in the “Information”.
• This unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC
and FLAC files.
SUR. DECODE STRAIGHT
NET repeatedly to select “PC” as the input
1 Press
source.
The browse screen is displayed on the TV.
• This unit is compatible with sampling frequency of up to 96 kHz for WAV and
FLAC files, and 48 kHz for other files.
ENHANCER PURE DIRECT
SCENE
BD
DVD
TV
CD
• To play back FLAC files, you need to install server software that supports sharing
of FLAC files via DLNA on your PC or use a NAS that supports FLAC files.
RADIO
OPTION
ON SCREEN
Requirements
VOLUME
ENTER
RETURN
ENTER
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
MODE
1
2
3
4
5
6
7
8
9
0
10
MUTE
TV CH
This unit can play back music files stored on the following music
servers.
- PC with Windows Media Player 11 or later installed
- PC with DLNA/UPnP certificate server software installed
- NAS with DLNA/UPnP certification
Media sharing setup
ENT
TV
INPUT
TV VOL
Cursor keys
HDMI OUT
To play back music files stored on your PC or DLNA-compatible
NAS, first you need to configure the media sharing setting on each
music server.
■ For a PC with Windows Media Player
installed
that Windows Media Player 11 or later is
1 Check
installed on your PC.
the media sharing settings, enable the media
2 Insharing
and select this unit as a device to which the
• If playback of a music file selected from this unit is ongoing on your PC, the
playback screen is displayed.
the cursor keys to select a music server and
2 Use
press ENTER.
the cursor keys to select an item and press
3 Use
ENTER.
If a song is selected, playback starts and the playback
screen is displayed.
media is shared.
■ For a NAS or a PC with other DLNA sever
software installed
Refer to the instruction manual of the device or software and
configure the media sharing setting.
En
64
MAIN
ZONE 2
■ Playback screen
CODE SET
SOURCE RECEIVER
• To return to the previous screen, press RETURN.
1
2
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
• Files not supported by this unit are not listed (or cannot be selected even if
listed).
• You can register your favorite items as shortcuts (p.73) and access them
directly by selecting the shortcut numbers.
AV
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
1
2
3
ENHANCER PURE DIRECT
1 Status indicators
Display the current shuffle/repeat settings (p.66) and playback status
(play/pause).
SCENE
TV
CD
RADIO
4
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
Menu operation keys
Cursor keys
1
2
3
5
6
7
9
0
10
8
ENT
TV
TV CH
HDMI OUT
2 Playback information
Displays the artist name, album name, song title and elapsed time.
Use the cursor keys to select information to be scrolled.
5
3 Album image
1 Status indicators
Display the current shuffle/repeat settings (p.66) and playback status
(play/pause).
4
INPUT
TV VOL
6
ENTER
RETURN
External device
operation keys
MODE
4
■ Browse screen
SUR. DECODE STRAIGHT
BD
DVD
3
4 Operation menu
Use the cursor keys to select an item and press ENTER to confirm the
selection.
To close the submenu, press RETURN.
2 List name
3 Contents list
Menu
Displays the list of PC contents. Use the cursor keys to select an item and
press ENTER to confirm the selection.
Submenu
Function
Resumes playback from pause.
MUTE
Stops playback.
4 Album image
5 Item number/total
Play
Control
6 Operation menu
Skips forward/backward.
Use the cursor keys to select an item and press ENTER to confirm the
selection.
Menu
Stops playback temporarily.
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation
keys to redisplay it.
Function
1 Page Up
Moves to the previous/next page of the list.
1 Page Down
10 Pages Up
Moves to 10 pages forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
• You can also use the external device operation keys (
remote control to control playback.
,
,
,
,
) on the
• You can also use a DLNA-compatible Digital Media Controller (DMC) to control
playback. For details, see “DMC Control” (p.82).
En
65
MAIN
ZONE 2
■ Shuffle/repeat settings
CODE SET
You can configure the shuffle/repeat settings for playback of PC
music contents.
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
AV
• The shuffle/repeat settings are shared by USB and network sources.
“PC” is selected as the input source, press
1 When
OPTION.
the cursor keys to select “Shuffle” (Shuffle) or
2 Use
“Repeat” (Repeat) and press ENTER.
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
SCENE
BD
DVD
TV
CD
RADIO
OPTION
ON SCREEN
OPTION
• To return to the previous screen during menu operations, press RETURN.
• Texts in parentheses denote indications on the front display.
VOLUME
ENTER
RETURN
ENTER
RETURN
DISPLAY
A
POP-UP
MENU
TOP
MENU
Cursor keys
the cursor keys (
3 Use
press ENTER.
/ ) to select a setting and
MUTE
MODE
Item
1
2
3
4
5
6
7
8
9
0
10
ENT
Shuffle
(Shuffle)
Setting
Function
Off (Off)
Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order. “
” appears in
the TV screen.
Off (Off)
Turns off the repeat function.
Single
(Single)
Plays back the current song repeatedly.
“ 1 ” appears in the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly. “
” appears in the
TV screen.
TV
INPUT
TV VOL
TV CH
HDMI OUT
MUTE
Repeat
(Repeat)
4 To exit from the menu, press OPTION.
En
66
MAIN
ZONE 2
CODE SET
Listening to Internet radio
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
You can listen to Internet radio stations using the vTuner Internet
radio station database service particularly customized for this unit,
providing a database of numerous radio stations in the world.
AV
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
• To use this function, this unit must be connected to the Internet (p.31). You can
check whether the network parameters (IP address, etc.) are properly assigned to
this unit in “Network” (p.102) in the “Information”.
SUR. DECODE STRAIGHT
MUSIC
SLEEP
PARTY
ENHANCER PURE DIRECT
TV
CD
NET repeatedly to select “NET RADIO” as the
1 Press
input source.
RADIO
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
4
• This service may be discontinued without notice.
• Some Internet radio stations may not be played.
SCENE
BD
DVD
1
2
3
NET
MEMORY
MOVIE
■ Browse screen
Menu operation keys
Cursor keys
The browse screen is displayed on the TV.
6
5
1 Playback indicator
2 List name
3 Contents list
ENTER
RETURN
Displays the list of Internet radio contents. Use the cursor keys to select
an item and press ENTER to confirm the selection.
MODE
4 Station art
1
2
3
4
5
6
7
8
9
0
10
5 Item number/total
6 Operation menu
ENT
TV
INPUT
TV VOL
MUTE
TV CH
HDMI OUT
the cursor keys to select an item and press
2 Use
ENTER.
If an Internet radio station is selected, playback starts and
the playback screen is displayed.
Use the cursor keys to select an item and press ENTER to confirm the
selection.
Menu
Function
Bookmark On
Adds the station selected in the list to “Bookmarks”.
1 Page Up
Moves to the previous/next page of the list.
1 Page Down
10 Pages Up
Moves to 10 pages forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
• To return to the previous screen, press RETURN.
• You can register your favorite Internet radio stations as shortcuts (p.73) and
access them directly by selecting the shortcut numbers.
En
67
MAIN
ZONE 2
CODE SET
SOURCE RECEIVER
• By adding your favorite Internet radio stations to “Bookmarks”, you can access to
them quickly from “Bookmarks”. To remove stations from “Bookmarks”, select the
station in “Bookmarks” and then “Bookmark Off”.
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
ENHANCER PURE DIRECT
1
2
SCENE
TV
CD
) on the remote
■ Playback screen
SUR. DECODE STRAIGHT
BD
DVD
,
• You can also register your favorite Internet radio stations by accessing the
following website with the web browser on your PC. To use this feature, you need
the vTuner ID of this unit and your e-mail address to create your personal account.
You can check the vTunerID (MAC address of this unit) in the “Network” screen
(p.102) in the “Information” menu.
http://yradio.vtuner.com/
AV
TUNER
• You can also use the external device operation keys (
control to control playback.
RADIO
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
3
Menu operation keys
Cursor keys
4
ENTER
RETURN
External device
operation keys
MODE
1 Playback indicators
1
2
3
5
6
7
9
0
10
4
8
ENT
TV
TV VOL
Displays the station name and elapsed time.
3 Station art
INPUT
MUTE
2 Playback information
TV CH
HDMI OUT
4 Operation menu
Use the cursor keys to select an item and press ENTER to confirm the
selection.
To close the submenu, press RETURN.
Menu
Submenu
Function
Bookmark
On
Adds the current station to “Bookmarks”.
Play
Control
Stops playback.
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation
keys to redisplay it.
En
68
Playing back music in multiple rooms (multi-zone)
The multi-zone function allows you to play back separate input
sources in the room where this unit is installed (main zone) and
another room (Zone2).
For example, while you are watching a TV in the living room (main
zone), another person can listen to radio in the bedroom (Zone2).
■ Using the internal amplifier of this unit
Connect the speakers placed in Zone2 to this unit with speaker
cables.
To utilize the EXTRA SP terminals for Zone2 speakers, set “Power
Amp Assign” (p.91) in the “Setup” menu to “7ch +1ZONE” after
connecting the power cable to an AC wall outlet.
This unit (rear)
Bedroom (Zone2)
Living room (main zone)
• Only analog audio signals (including radio, USB and network sources) can be
output to Zone2. To listen to playback sounds of an external device in Zone2, you
need to connect the device to the AUDIO jacks (AV5~6, AUDIO1~2 or VIDEO AUX
jacks) of this unit. The party mode (p.72) allows you to enjoy main zone sources in
Zone2 simultaneously regardless of input audio signal types.
Zone2
Preparing for Zone2
Connect devices to be set in Zone2 to this unit. The connection
method varies depending on an amplifier to use (this unit or
external amplifier).
Caution
Main zone
• When Zone2 output is enabled (p.71), the surround back speakers in the main
zone do not output sound.
• Remove the power cable of this unit from an AC wall outlet before connecting
speakers or an external amplifier.
• Be careful that the core of the speaker cable does not touch anything or come
into contact with the metal areas of this unit. This may damage this unit or the
speakers. If the speaker cables short circuit, “CHECK SP WIRES” will appear
on the front display when this unit is turned on.
En
69
■ Using an external amplifier
Connect the external amplifier placed in Zone2 to this unit with a
stereo pin cable.
This unit (rear)
HDMI 1
HDMI OUT
2
HDMI 2
HDMI 3
R
COMPONENT
VIDEO
FM
FRONT
By connecting an infrared signal receiver/emitter to the REMOTE
IN/OUT jacks of this unit, you can operate this unit and external
devices from Zone2 with the supplied remote control.
HDMI
• To operate external devices with the supplied remote control, register a remote
control code for each device in advance (p.106).
(BD/DVD)
NNA
■ Operating this unit from Zone2
(remote connection)
L
CEN
REMOTE
IN
PR
ZONE2 OUT jacks
OUT
75Ω
PB
Y
VIDEO
MONITOR OUT
This unit (rear)
+12V
0.1A MAX.
TRIGGER OUT
WORK
AV
UT
AUDIO 1
AUDIO 2
AUDIO
OUT
ZONE 2
OUT
HDMI 1
HDMI OUT
2
1
External amplifier
Audio input (analog stereo)
O
ANTENNA
AM
HDMI 2
REMOTE IN/OUT jacks
(BD/DVD)
ARC
REMOTE
COMPONENT
VIDEO
FM
REMOTE
IN
IN
PR
GND
S VIDEO
OUT
75Ω
OUT
PB
Y
VIDEO
MONITOR OUT
+12V
0.1A MAX.
TRIGGER OUT
L
R
OPTICAL
(TV)
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
Infrared signal
transmitter
Infrared signal
receiver
Zone2
Main zone
External device
(CD player, etc.)
Remote control
Zone2
Main zone
En
70
MAIN
ZONE 2
CODE SET
MAIN/ZONE2
SOURCE RECEIVER
RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
V-AUX
AV
PRESET
TUNING
SUR. DECODE STRAIGHT
Controlling Zone2
1 Set MAIN/ZONE2 to “ZONE2”.
2 Press RECEIVER
AV5~6
AUDIO
DOCK
TUNER
PHONO
NET
USB
REMOTE IN/OUT jacks
REMOTE
TV
CD
RADIO
DISPLAY
A
POP-UP
MENU
TOP
MENU
Remote control
MUTE
MODE
Zone2
1
2
3
5
6
7
9
0
10
OUT
OUT
3 Use the following keys to select an input source.
V-AUX: VIDEO AUX (AUDIO) jacks (on the front panel)
AV5~6: AV5~6 (AUDIO) jacks
AUDIO: AUDIO1~2 jacks (press repeatedly to switch
between “AUDIO1” and “AUDIO2”)
DOCK: DOCK jack
TUNER: FM/AM radio
PHONO: PHONO jacks
NET: NETWORK jack (press repeatedly to select a desired
network source
USB: USB jack (on the front panel)
8
ENT
TV
TV CH
Each time you press the key, Zone2 output is enabled or
disabled.
When Zone2 output is enabled, “ZONE2” lights up in the
front display.
4
INPUT
MUTE
IN
Yamaha products
(up to 6, including this unit)
VOLUME
ENTER
TV VOL
REMOTE
IN
Infrared signal
receiver
OPTION
ON SCREEN
RETURN
REMOTE IN/OUT jacks
ENHANCER PURE DIRECT
SCENE
BD
DVD
Remote connections between Yamaha products
If you are using Yamaha products that support remote connections
like this unit, an infrared signal transmitter is unnecessary. You can
transmit remote control signals by connecting the REMOTE IN/OUT
jacks with monaural mini-jack cables and an infrared signal
receiver.
HDMI OUT
• You cannot select USB and network sources exclusively for each zone. For
example, if you select “PC” for Zone2 when “USB” is selected for the main
zone, the input source for the main zone also switches to “PC”.
En
71
MAIN
ZONE 2
playback on the external device, or select a
4 Start
radio station.
CODE SET
SOURCE RECEIVER
HDMI
1
2
3
4
7
V-AUX
5
6
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
Refer to the instruction manual of the external device.
For details on the following operations, see the
corresponding pages.
- Listening to FM/AM radio (p.50)
- Playing back iPod music (p.54)
- Playing back music via Bluetooth (p.59)
- Playing back music stored on a USB storage device (p.61)
- Playing back music stored on PCs (p.64)
- Listening to Internet radio (p.67)
AV
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
SLEEP
PARTY
SCENE
BD
DVD
TV
CD
■ Enjoying main zone sources in Zone2
(party mode)
The party mode allows you to enjoy main zone sources in Zone2
simultaneously. During the party mode, stereo playback is
automatically selected for all zones. Utilize this function when you
want to play back main sources as background music in a home
party, etc.
1 Press PARTY.
Each time you press the key, the party mode is turned on or
off.
When the party mode is turned on, “PARTY” lights up in the
front display.
RADIO
OPTION
ON SCREEN
• The on-screen operations are not available for Zone2. Use the front display
or web control (p.74) to control Zone2.
VOLUME
ENTER
RETURN
• If the party mode does not work on Zone2, set “Party Mode Set” (p.99) in
the “Setup” menu to “Enable” (default).
VOLUME
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
MODE
1
2
3
4
5
6
7
8
9
0
10
MUTE
• To set the sleep timer (120 min, 90 min, 60 min, 30 min, off), press SLEEP
repeatedly. The Zone2 output will be disabled after a specified period of
time.
• To adjust the Zone2 volume, press VOLUME or MUTE (available only when
using the internal amplifier of this unit).
ENT
Caution
TV
INPUT
TV VOL
MUTE
TV CH
HDMI OUT
• To avoid unexpected noise, never play back DTS-CDs in Zone2.
En
72
MAIN
ZONE 2
CODE SET
Useful functions
SOURCE RECEIVER
HDMI
3
4
7
V-AUX
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
PRESET
TUNING
1
2
5
6
Registering favorite items (shortcut)
AV
1
FM
AM
INFO
MEMORY
NET
USB
MEMORY
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
SLEEP
PARTY
ENHANCER PURE DIRECT
TV
CD
RADIO
RETURN
1 Play back a song or a radio station to be registered.
2 Press MEMORY.
VOLUME
ENTER
DISPLAY
A
POP-UP
MENU
TOP
MENU
MEMORY
MUTE
VOL.
SW
C
L
R
SL
SR
SBL
SBR
01:Empty
MODE
1
2
3
4
5
6
7
8
9
0
10
Numeric keys
You can also enter a shortcut number (01 to 40) directly by
using the numeric keys.
01:USB
VOL.
SW
C
L
R
SL
SR
SBL
SBR
• “No Presets” appears when no items are registered.
• “Empty” appears when a preset number not in use is entered.
• The registered item cannot be recalled in the following cases.
- A USB storage device which contains the registered item is not connected
to this unit.
- The registered network content is temporarily unavailable or out of service.
ENT
TV
MUTE
1 Press NET or USB.
2 Press PRESET repeatedly to select a desired item.
- A PC which contains the registered item is turned off or not connected to
the network.
Shortcut number (flashes)
- The registered item (file) has been deleted or moved to another location.
INPUT
TV VOL
Recall a registered item by selecting the shortcut number.
RECALL
Select a desired item and register it to a shortcut number.
OPTION
ON SCREEN
• You can also use the “Bookmarks” feature to register Internet radio stations (p.67).
■ Registering an item
SCENE
BD
DVD
You can register up to 40 favorite USB and network contents as
shortcuts and access them directly by selecting the shortcut
numbers.
■ Recalling a registered item
TV CH
HDMI OUT
• To change a shortcut number to which the item will be registered, use
PRESET or numeric keys to select the shortcut number after step 2.
MEMORY
02:Empty
• When you register music files stored on a USB storage device or a PC, this
unit memorizes the relative position of the music files in the folder. If you
have added or deleted any music files to or from the folder, this unit may not
recall the music file correctly. In such cases, register the items again.
VOL.
SW
C
L
R
SL
SR
SBL
SBR
“Empty” (not in use) or item currently registered
3 To confirm the registration, press MEMORY.
En
73
Controlling this unit from the web browser
(web control)
■ Top menu screen
You can control this unit with the web control screen displayed in
the web browser.
1
Web browser
Web control
PC
Web control
Router
This unit
5
2
6
3
4
7
1 CONTROL
Moves to the control screen for the selected zone.
• To use this function, this unit and your PC must be connected to the network
properly (p.31).
• Some security software installed on your PC may block the access of this
unit to your PC. In such cases, configure the security software appropriately.
• We recommend using Internet Explorer 7.x or 8.x as a web browser.
2 STATUS
Turns on/off the power for each zone, or displays the input source and
volume set for each zone.
3 SETTINGS
Moves to the settings screen.
4 PARTY MODE
• If you set “Network Standby” (p.75) to “On”, you can display the web control
screen even when this unit is in standby mode.
• You can limit access to this unit from the network devices (PCs, etc.) with
the MAC address filter (p.75).
1 Start the web browser.
the IP address of this unit in the address bar
2 Enter
of the web browser.
Turns on/off the party mode (p.72).
5 SYSTEM POWER
Turns on/off the power for all zones.
6 MAIN VOLUME
Adjusts the volume or mutes the audio output for the main zone. You can
also switch the step for the volume adjustment.
7 RELOAD
Reloads the current status of this unit.
You can check the IP address in “Network” (p.102) in the
“Information” menu.
• By adding the IP address of this unit to the bookmark of the browser, you will
be able to open it without entering the IP address from the next time.
However, the IP address of this unit may change if you are using a DHCP
server.
En
74
■ Control screen
■ Settings screen
3
1
4
1
5
2
6
1 PLAY INFO
Selects an input source or controls playback for the selected zone.
2 TOP MENU
Moves to the top menu screen.
3 SCENE
Select a scene for the main zone.
4 POWER
Turns on/off the power for the selected zone.
5 VOLUME
Adjusts the volume or mutes the audio output for the selected zone. You
can also switch the step for the volume adjustment. (These functions are
available only when the internal amplifier of this unit is used.)
6 RELOAD
Reloads the current status of this unit.
2
3
1 Rename
Edits the friendly name (name for this unit in the network) or the name of
each zone (p.99). Click “APPLY” to apply the changes to this unit.
MAC Filter
Sets the MAC address filter (p.98) to limit access to this unit from the
network devices. Click “APPLY” to apply the changes to this unit.
Auto Reload
Enables/disables automatic reloading. When “Auto Reload” is “On”
(enabled), the web control screen reloads the status of this unit every 5
seconds.
Network Standby
Enables/disables the network standby function (p.98).
Tips 1/ 2
Displays the tips for use of the web control.
Create Link
Creates a shortcut link to the desired control screen.
Backup/Recovery
Creates backup of the settings of this unit on the PC, or restores the
settings from the backup.
2 BACK
Moves to the top menu screen.
3 RELOAD
Reloads the current status of this unit.
En
75
MAIN
ZONE 2
Note
• Do not operate this unit during the recovery process (restoring the settings).
Otherwise, the settings may not be restored correctly. When the recovery
finishes, click “OK” to set this unit to standby mode.
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
SUR. DECODE STRAIGHT
■ Switching information on the front display
ENHANCER PURE DIRECT
1
SCENE
TV
CD
RADIO
OPTION
ON SCREEN
DISPLAY
POP-UP
MENU
TOP
MENU
Press INFO.
Each time you press the key, the display item switches.
INFO
VOLUME
ENTER
DISPLAY
SW
C
L
R
SL
SR
SBL
SBR
1
2
3
4
5
6
7
8
10
ENT
TV
INPUT
TV VOL
TV CH
* When using iPod wireless system, Bluetooth
receiver, or during simple play:
Input (input source name), DSP Program (sound
mode name), Audio Decoder (decoder name)
Song (song title), Artist (artist name), Album (album
name), DSP Program (sound mode name), Audio
Decoder (decoder name)
* When iPod is connected via USB, the display item
switches in the same manner as “DOCK”.
NET RADIO
Station (station name), DSP Program (sound mode
name), Audio Decoder (decoder name)
MUTE
Item name
0
PC
USB
VOL.
DSPProgram
MODE
9
DOCK
Viewing the current status
* When tuning into a Radio Data System
broadcasting station, Radio Data System data is
also available (p.51).
Song (song title), Artist (artist name), Album (album
name) , DSP Program (sound mode name), Audio
Decoder (decoder name)
INFO
INFO
RETURN
TUNER
• The backup does not contain user information (user account, password, etc.)
or unit-specific information (MAC address, IP address, etc).
AV
BD
DVD
Frequency (frequency), DSP Program (sound mode
name), Audio Decoder (decoder name)
CODE SET
SOURCE RECEIVER
HDMI OUT
About 3 seconds later, the corresponding information
appears.
HDMI1
1 Press DISPLAY.
The following information is displayed on the TV.
VOL.
TheRoxytheat
■ Viewing the status information on the TV
SW
C
L
R
SL
SR
SBL
SBR
MUTE
Input
source
Volume
Information
• Available items vary depending on the selected input source. Also, the
display item can be applied separately to each input source group.
Input source group
Item
HDMI1~7
V-AUX
AV1~6
AUDIO1~2
PHONO
Input (input source name), DSP Program (sound
mode name), Audio Decoder (decoder name)
Audio
format/
Decoder
Sound
mode
CINEMA DSP status
2 To close the information display, press DISPLAY.
En
76
Configuring settings in accordance with a playback source (Option menu)
You can configure the playback-related settings in accordance with a playback source.
Since this menu is operational on the front panel (or on the TV screen), you can easily
configure the settings during playback.
1 Press OPTION.
OPTION
ToneControl
Option menu items
• Available items vary depending on the selected input source.
• Texts in parentheses denote indications on the front display.
VOL.
SW
C
L
R
SL
SR
SBL
SBR
Front display
TV screen
2 Use the cursor keys to select an item and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
3
4 To exit from the menu, press OPTION.
Use the cursor keys ( / ) to select a setting and press ENTER.
Item
Function
Tone Control
(Tone Control)
Adjusts the high-frequency range and low-frequency range
of sounds.
Page
78
Adaptive DRC
(Adaptive DRC)
Sets whether dynamic range (from maximum to minimum)
is adjusted automatically in conjunction with adjusting the
volume level.
78
CINEMA DSP 3D Mode
(CINEMA DSP 3D)
Enables/disables CINEMA DSP 3D.
78
Dialogue Lift
(Dialog Lift)
Adjusts the vertical position of center sound when presence
speakers are used.
78
Extended Surround
(EXTD Surround)
Selects the 5.1 to 7.1-channel signal playback method
when surround back speakers are used.
79
Volume Trim
(Volume Trim)
Corrects volume differences between input sources.
79
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer.
79
Traffic Program
(TrafficProgram)
Searches for a traffic information station automatically.
52
Shuffle
(Shuffle)
Configures the shuffle setting for the iPod (p.58), USB
storage device (p.63) or PC (p.66).
—
Repeat
(Repeat)
Configures the repeat setting for the iPod (p.58), USB
storage device (p.63) or PC (p.66).
—
Connect/Disconnect
(Connect/Disconnect)
Establishes/terminates a wireless connection between your
Bluetooth component and the Bluetooth receiver.
60
Pairing
(Pairing)
Performs pairing of your Bluetooth component and the
Bluetooth receiver.
59
En
77
■ Tone Control (Tone Control)
■ CINEMA DSP 3D Mode (CINEMA DSP 3D)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of speaker
sounds. When connecting headphones, you can adjust high-frequency range and lowfrequency range of sounds output from headphones.
Enables/disables CINEMA DSP 3D. If this function is set to “On”, CINEMA DSP 3D
functions according to the selected sound programs (except 2ch Stereo and 7ch
Stereo).
Choices
Treble (Treble), Bass (Bass)
Settings
Setting range
-6.0db ~ Bypass (Bypass) ~ +6.0dB *0.5dB steps
Default
Bypass (Bypass)
On (On) (default)
Enables CINEMA DSP 3D.
Off (Off)
Disables CINEMA DSP 3D.
■ Dialogue Lift (Dialog Lift)
• If you set the balance extremely off, sounds may not match those from other channels well.
Adjusting with the front panel controls
a Press TONE CONTROL to select “Treble” or “Bass”.
b Press PROGRAM to make an adjustment.
Adjusts the vertical position of center sound such as dialogues when presence
speakers are used. If dialogues are heard from a position lower than the TV screen,
adjust this setting to raise the position.
Setting range
0~5 (higher raises the position)
Default
0
■ Adaptive DRC (Adaptive DRC)
Sets whether dynamic range (from maximum to minimum) is adjusted automatically in
conjunction with adjusting the volume level. When it is set to “On”, it is useful for
listening to playback at low volume at night.
Ideal position
Settings
On (On)
Adjusts the dynamic range automatically.
Off (Off) (default)
Does not adjust the dynamic range automatically.
If “On” is selected,” the dynamic range becomes narrow at a low volume, and becomes
wide at a high volume.
On
Off
Input level
Volume: high
Output level
Output level
Volume: low
On
Off
Input level
En
78
■ Extended Surround (EXTD Surround)
■ Enhancer (Enhancer)
Selects how to play back 5.1- to 7.1-channel sources when surround back speakers
are used.
Enables/disables Compressed Music Enhancer (p.49).
Settings
• This setting is applied separately to each input source.
Auto (Auto) (default)
Automatically selects the most suitable decoder if a flag for
reproducing surround back channel is present, and reproduces the
signals in 6.1- or 7.1-channel. When the DTS or DTS-HD signal is
input, the unit reproduces the signal in 7.1-channel regardless of a flag
for surround back channel.
(
PLIIx Movie
PLIIxMo)
Always reproduces signals in 7.1-channel using the Dolby Pro Logic
IIx Movie decoder. This setting is available only when two surround
back speakers are connected.
(
PLIIx Music
PLIIxMu)
Always reproduces signals in 6.1- or 7.1-channel using the Dolby Pro
Logic IIx Music decoder. This setting is available only when one or two
surround back speakers are connected.
EX/ES (EX/ES)
Automatically selects the most suitable decoder, and reproduces
signals in 6.1-channel.
Off (Off)
Always reproduces signals in original channels.
Settings
Off (Off)
Disables Compressed Music Enhancer.
On (On)
Enables Compressed Music Enhancer.
Default
TUNER, DOCK, (network sources), USB: On (On)
Others: Off (Off)
■ Volume Trim (Volume Trim)
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
• This setting is applied separately to each input source.
Setting range
-6.0dB ~ +6.0dB (0.5dB steps)
Default
0.0dB
En
79
CONFIGURATIONS
Configuring input sources (Input menu)
4 Use the cursor keys (
/ ) to select an item and press ENTER.
You can change the input source settings using the TV screen.
1 Press ON SCREEN.
2 Use the cursor keys to select “Input” and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
the cursor keys ( / ) to select an input source to be configured
3 Use
and press the cursor key ( ).
5 Use the cursor keys to select a setting and press ENTER.
6 To exit from the menu, press ON SCREEN.
Input menu items
• Available items vary depending on the selected input source.
The input source of this unit also changes.
Item
Function
Page
Rename/Icon Select
Changes the input source name and icon.
81
Audio In
Combines the video jack of the selected input source
with an audio jack of others.
81
Decoder Mode
Sets the format of digital audio playback to DTS.
81
Standby Charge
Selects whether to charge the iPod when this unit is in
standby mode.
81
iPod Interlock
Selects whether to control this unit in conjunction with
iPod operations.
82
Video Out
Selects a video to be output with the audio input
source.
82
DMC Control
Selects whether to allow a DLNA-compatible Digital
Media Controller (DMC) to control playback.
82
• You can still switch the input source by using cursor keys ( / ) after step 3.
En
80
■ Rename/Icon Select
(To input audio through analog audio jacks)
Changes the input source name and icon displayed on the front display or TV screen.
Select “AV5”, “AV6”, “AUDIO1” or “AUDIO2”, and connect the device to the
corresponding audio jacks of this unit with a stereo pin cable.
Input sources
HDMI1~7, AV1~6, V-AUX, AUDIO1~2, PHONO, USB, DOCK
■ Setup procedure
1 Use the cursor keys ( / ) to select an icon and press the cursor key ( ).
2 Press ENTER, use the cursor keys to rename, and then press ENTER again.
■ Decoder Mode
Sets the format of digital audio playback to DTS.
For example, if this unit does not detect DTS audio and outputs noise, set “Decoder
Mode” to “DTS”.
Input sources
HDMI1~7, AV1~4, V-AUX
Settings
3 Use the cursor keys to select “OK” and press ENTER.
• To clear the entry, select “CLEAR”.
4 To exit from the menu, press ON SCREEN.
■ Audio In
Combines the video jack of the selected input source with an audio jack of others. For
example, use this function in the following cases.
Auto (default)
Automatically selects an audio format to match the input audio signal.
DTS
Selects DTS only. (Other audio signals are not reproduced.)
■ Standby Charge
Selects whether to charge the iPod connected to the iPod dock or iPod wireless system
when this unit is in standby mode.
Input sources
DOCK (iPod)
Settings
On (default)
Charges the iPod even when this unit is in standby mode.
Off
Does not charge the iPod when this unit is in standby mode.
• Connecting a playback device that supports HDMI video output but not HDMI audio output
• Connecting a playback device that has component video jacks and analog stereo jacks
(game consoles, etc.)
Input sources
HDMI1~7, AV1~2
■ Setup procedure
(To input audio through a digital optical jack)
Select “AV1” or “AV4”, and connect the device to the corresponding audio jacks of this
unit with a digital optical cable.
(To input audio through a digital coaxial jack)
Select “AV2” or “AV3”, and connect the device to the corresponding audio jacks of this
unit with a digital coaxial cable.
En
81
■ iPod Interlock
■ DMC Control
Selects whether to control this unit in conjunction with operations of the iPod connected
to the iPod wireless system.
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control
playback.
Input sources
DOCK (iPod)
Input source
PC
Settings
• This function is available only when an iPod wireless system is connected to this unit.
Disable
Does not allow DMCs to control playback.
❑ Power & Input
Enable (default)
Allows DMCs to control playback.
Selects whether to control the power and input source selection of this unit in
conjunction with iPod operations.
Settings
On (default)
Enables power and input interlocking controls. When you start
playback of the iPod, this unit turns on and “DOCK” is selected as the
input source. When you stop playback, this unit enters standby mode
after a short time.
Off
Disables power and input interlocking controls.
• A Digital Media Controller (DMC) is a device that can control other network devices through the network.
When this function is enabled, you can control playback of this unit from DMCs (Windows Media Player 12,
etc.) on the same network.
• When “Power & Input” is set to “On”, the iPod connected to the iPod wireless system is charged regardless
of the “Standby Charge” setting (p.81).
❑ Volume
Selects whether to control the volume of this unit in conjunction with iPod operations.
Settings
On (default)
Enables volume interlocking controls. When you adjust the iPod
volume, the volume of the unit is also adjusted.
Off
Disables volume interlocking control.
■ Video Out
Selects a video to be output with the audio input source.
Input sources
TUNER, (network sources), USB
Settings
Off (default)
Does not output videos.
HDMI1~7, AV1~6,
V-AUX
Outputs videos input through the corresponding video input jacks.
En
82
Configuring the SCENE function (Scene menu)
You can change the settings of the SCENE function (p.44) using the TV screen.
1 Press ON SCREEN.
2 Use the cursor keys to select “Scene” and press ENTER.
the cursor keys (
3 Use
cursor key ( ).
/ ) to select a scene to be configured and press the
5 Use the cursor keys and ENTER to change the setting.
6 To exit from the menu, press ON SCREEN.
Scene menu items
Item
Function
Page
Save
Registers the settings currently applied to this unit to the
selected scene.
83
Load
Loads the settings registered to selected scene. You can
also configure the SCENE link playback setting or view the
scene assignments.
84
Rename/Icon Select
Changes the scene name and icon.
84
Reset
Restores the default settings for the selected scene.
84
■ Save
Registers the settings currently applied to this unit (input source, sound program/
surround decoder and Compressed Music Enhancer on/off, and HDMI output jack) to
the selected scene.
• If you have changed the input assignment for a scene, you also need to change the external device
assigned to the corresponding SCENE key (p.44).
• You can still switch the scene by using cursor keys ( / ) after step 3.
4 Use the cursor keys (
/ ) to select an item and press ENTER.
En
83
■ Load
■ Rename/Icon Select
Loads the settings registered to selected scene.
Select “DETAIL” to configure the SCENE link playback setting or view the scene
assignments.
Changes the scene name and icon displayed on the front display or TV screen.
❑ Device Control
Enables to start playback of external devices connected to this unit via HDMI or a
Yamaha product connected to the REMOTE OUT jack, in conjunction with a scene
selection (SCENE link playback)
■ Setup procedure
1 Use the cursor keys ( / ) to select an icon and press the cursor key ( ).
2 Press ENTER, use the cursor keys to rename, and then press ENTER again.
Settings
Off
Disables the SCENE link playback function.
HDMI Control
Enables SCENE link playback using HDMI Control signals. Select this if
HDMI Control-compatible device (BD/DVD players, etc.) is connected
to this unit via HDMI. It also turns on the HDMI Control-compatible TV
concurrently.
IR: Yamaha BD/DVD 1
Enables SCENE link playback using remote control signals. Select this
if a Yamaha BD/DVD player is connected to the REMOTE OUT jack.
Enables SCENE link playback using remote control signals. Select this
IR: Yamaha BD/DVD 2 if a Yamaha BD/DVD player is connected to the REMOTE OUT jack and
“IR: Yamaha BD/DVD 1” does not work properly.
IR: Yamaha CD
Enables SCENE link playback using remote control signals. Select this
if a Yamaha CD player is connected to the REMOTE OUT jack.
Default
SCENE1 (BD/DVD), SCENE2 (TV): HDMI Control
SCENE3 (CD): IR: Yamaha CD
SCENE4 (RADIO): Off
3 Use the cursor keys to select “OK” and press ENTER.
• To clear the entry, select “CLEAR”.
4 To exit from the menu, press ON SCREEN.
■ Reset
Restores the default settings (p.44) for the selected scene.
• To control playback of an HDMI Control-compatible device by SCENE link playback, you need to set “HDMI
Control” in the “Setup” menu to “On” and perform the HDMI Control link setup (p.123).
❑ Detail
Displays the assignments of the selected scene.
Input
Input source to be used
HDMI Output
HDMI OUT jack to be used
Mode
Sound program/surround decoder to be used
Enhancer
Compressed Music Enhancer on/off
En
84
Configuring sound programs/surround
decoders (Sound Program menu)
4 Use the cursor keys (
/ ) to select an item and press ENTER.
You can change the settings of the sound programs and surround decoders using the
TV screen.
1 Press ON SCREEN.
2 Use the cursor keys to select “Sound Program” and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
• To restore the default settings for the selected sound program, select “Reset”.
the cursor keys ( / ) to select a sound program to be
3 Use
configured and press the cursor key ( ).
5 Use the cursor keys to select a setting and press ENTER.
6 To exit from the menu, press ON SCREEN.
• You can still switch the sound program by using cursor keys ( / ) after step 3.
En
85
Sound Program menu items
Item
Function
Settings
Reverb Delay
Adjusts the delay between the direct
sound and rear reverberant sound
generation.
0 ms ~ 250ms
Higher to enhance the delay
effect and lower to reduce.
Reverb Level
Adjusts the volume of the reverberant
sound.
0% ~ 100%
Higher to strengthen the
reverberant sound and
lower to weaken.
• Available items vary depending on the selected sound program or surround decoder.
■ Settings for sound programs
Item
Function
Settings
Decode Type
Selects a surround decoder to be used
in combination with the selected sound
program.
PLIIx Movie ( PLII
Movie), Neo:6 Cinema
DSP Level
Adjusts the sound field effect level.
-6dB ~ +3dB (default: 0dB)
Higher to enhance the
sound field effect and lower
to reduce.
Initial Delay
Adjusts the delay between the direct
sound and presence sound field
generation.
1ms ~ 99ms
Higher to enhance the delay
effect and lower to reduce.
Surround Initial Delay
Adjusts the delay between the direct
sound and surround sound field
generation.
Surround Back Initial
Delay
Adjusts the delay between the direct
sound and surround back sound field
generation.
Room Size
Adjusts the broadening effect of the
presence sound field.
Surround Room Size
Adjusts the broadening effect of the
surround sound field.
Surround Back Room
Size
Adjusts the broadening effect of the
surround back sound field.
Liveness
Adjusts the loss of the presence sound
field.
Surround Liveness
Adjusts the loss of the surround sound
field.
Surround Back
Liveness
Adjusts the loss of the surround back
sound field.
Reverb Time
Adjust the decay time of the rear
reverberant sound.
The following items are available when you select “2ch Stereo” or “7ch Stereo”.
Sound
program
2ch Stereo
1ms ~ 49ms
Higher to enhance the delay
effect and lower to reduce.
0.1 ~ 2.0
Higher to enhance the
broadening effect and lower
to reduce.
0 ~ 10
Higher to enhance the
reflectivity and lower to
reduce.
1.0s ~ 5.0s
Higher to enrich the
reverberant sound and
lower to have clear sound.
Item
Function
Settings
Direct
Selects whether to
automatically bypass the DSP
and tone control circuits when
an analog audio source is
played back.
Auto (default), Off
Select “Auto” to
bypass the circuits
(when both “Treble”
and “Bass” are set to
“Bypass”).
Center Level
Adjusts the volume of the
center channel.
Surround L Level
Adjusts the volume of the
surround left channel.
Surround R Level
Adjusts the volume of the
surround right channel.
Surround Back Level
Adjusts the volume of the
surround back channel.
Surround Back L
Level
Adjusts the volume of the
surround back left channel.
Surround Back R
Level
Adjusts the volume of the
surround back right channel.
Front Presence L Level
Adjusts the volume of the front
presence left channel.
Front Presence R Level
Adjusts the volume of the front
presence right channel.
0% ~ 100%
(default: 100%)
0% ~ 100%
(default: 50%)
7ch Stereo
0% ~ 100%
(default: 35%)
0% ~ 100%
(default: 33%)
• Available items in “7ch Stereo” vary depending on the speaker system being used.
En
86
■ Settings for decoders
The following items are available when you set “Decode Type” of “Surround Decoder”
to “PLIIx Music” or “Neo:6 Music”.
Decode Type
PLIIx Music
Neo:6 Music
Item
Function
Settings
Panorama
Adjusts the broadening
effect of the front sound
field.
Off (default), On
Select “On” to wrap front right/left
channel sounds around the field
and generate a spacious sound
field in combination with the
surround sound field.
Center Width
Adjusts the broadening
effect of the center
sound field.
0 ~ 7 (default: 3)
Higher to enhance the broadening
effect and lower to reduce (closer
to center).
Dimension
Adjusts the difference in
level between the front
and surround sound
fields.
-3 ~ +3 (default: 0)
Higher to strengthen the front
sound field and lower to
strengthen the surround sound
field.
Center Image
Adjusts the center
orientation level
(broadening effect) of
the front sound field.
0.0 ~ 1.0 (default: 0.3)
Higher to strengthen the center
orientation level (less broadening
effect) and lower to weaken (more
broadening effect).
En
87
Configuring various functions (Setup menu)
You can configure the various functions of this unit using the TV screen.
5 Use the cursor keys to select a setting and press ENTER.
6 To exit from the menu, press ON SCREEN.
1 Press ON SCREEN.
2 Use the cursor keys to select “Setup” and press ENTER.
3 Use the cursor keys (
/ ) to select a menu.
4 Use the cursor keys (
/ ) to select an item and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
En
88
Setup menu items
Menu
Item
Function
Auto Setup
Optimizes the speaker settings automatically (YPAO).
36
Selects a speaker system.
91
Front
Selects the size of the front speakers.
91
Center
Selects whether or not a center speaker is connected and its size.
91
Surround
Selects whether or not surround speakers are connected and its size.
91
Surround Back
Selects whether or not surround back speakers are connected and its size.
92
Front Presence
Selects whether or not presence speakers are connected.
92
Subwoofer
Selects whether or not a subwoofer is connected and its phase.
92
Extra Bass
Sets the speakers to produce the front channel low-frequency components.
92
Bass Cross Over
Sets the lower limit of low-frequency component produced from speakers of which the size is set to “Small”.
92
Sets the distance between each speaker and listening position.
92
Adjusts the volume of each speaker.
93
Power Amp Assign
Page
Configuration
Speaker
Manual Setup
Distance
Level
PEQ Select
Selects a type of equalizer to be used.
93
PEQ Data Copy
Copies the parametric equalizer values acquired with “Auto Setup” to the “Manual” fields for fine adjustment.
93
Enables/disabled the test tone output.
93
Parametric EQ
Test Tone
Sound
Lipsync
Adjusts the delay between video and audio output.
94
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
94
Max Volume
Sets the maximum volume so that sound is not too loud.
94
Initial Volume
Sets the initial volume for when this receiver is turned on.
94
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level in conjunction with volume adjustments.
94
Analog to Analog Conversion
Enables/disables the video conversion between the analog video jacks.
95
Processing
Enables/disables the video signal processing (resolution and aspect ratio).
95
HDMI Control
Enables/disables HDMI Control. You can also configure the relevant settings (ARC, TV audio input, etc).
96
Audio Output
Selects a device to output audio.
97
Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when this unit is in standby mode.
97
IP Address
Configures the network parameters (IP address, etc).
97
Network Standby
Selects whether or not to turn on this unit by the command from other network devices.
98
MAC Address Filter
Sets the MAC address filter to limit access to this unit from other network devices.
98
Video
HDMI
Network
En
89
Menu
Item
Function
Page
Max Volume
Sets the Zone2 maximum volume so that sound is not too loud.
98
Initial Volume
Sets the Zone2 initial volume for when this unit is turned on.
98
Party Mode Set
Enables/disables switching to the party mode.
99
Zone Rename
Changes the zone names displayed on the TV screen.
99
Zone2 Set
Multi Zone
Sets the amount of time for auto-standby.
99
Dimmer
Adjusts the brightness of the front display.
99
Scroll
Sets the scrolling manner of the front display.
99
Selects whether to display short messages on the TV screen when this unit is operated.
100
Auto Power Down
Front Panel Display
Display Set
Short Message
Wall Paper
Selects a wall paper displayed on the TV.
100
Trigger Mode
Specifies the condition for the TRIGGER OUT jack to function.
100
Target Zone
Specifies the zone with which the TRIGGER OUT jack functions synchronized.
100
Target Source
Specifies the output level of the electronic signal transmitted with each input switching.
100
Manual
Switches the output level for electronic signal transmission manually.
100
Prevents accidental changes to the settings.
100
Select an on-screen menu language.
101
Function
Trigger Output
Memory Guard
Language
En
90
Speaker (Manual Setup)
Configures the speaker settings manually.
■ Configuration
Configures the output characteristics of the speakers.
• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm or
larger or “small” if it is smaller than 16 cm.
❑ Front
Selects the size of the front speakers.
Settings
■ Power Amp Assign
Large
Select this for large speakers.
The front speakers will produce all of the front channel frequency
components.
Small (default)
Select this for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “Bass Cross Over”).
Selects a speaker system.
In addition to the 5.1- or 7.1-channel speaker system, various speaker configurations
are possible using the presence speakers, Zone2 speakers or bi-amp connection.
• “Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
Settings
❑ Center
Basic (default)
Select this when you use a normal speaker system (not to use Zone2
speakers or bi-amp connection).
7ch+1ZONE
Select this when you use Zone2 speakers (p.69) in addition to the
speaker system in the main zone.
Settings
5ch BI-AMP
Select this when you connect front speakers that support bi-amp
connections (p.19).
Large
Select this for large speaker.
The center speaker will produce all of the center channel frequency
components.
Small (default)
Select this for small speaker.
The subwoofer will produce center channel low-frequency components
(configurable in “Bass Cross Over”).
None
Select this when no center speaker is connected.
The front speakers will produce center channel audio.
Selects whether or not a center speaker is connected and its size.
❑ Surround
Selects whether or not surround speakers are connected and its size.
Settings
Large
Select this for large speakers.
The surround speakers will produce all of the surround channel
frequency components.
Small (default)
Select this for small speakers.
The subwoofer will produce surround channel low-frequency
components (configurable in “Bass Cross Over”).
None
Select this when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
En
91
❑ Surround Back
❑ Extra Bass
Selects whether or not surround back speakers are connected and its size.
Sets the speakers to produce the front channel low-frequency components.
Settings
Settings
Large x1
Select this when 1 large speaker is connected.
The surround back speaker will produce all of the surround back channel
frequency components.
Large x2
Select this when 2 large speakers are connected.
The surround back speakers will produce all of the surround back channel
frequency components.
Small x1
Select this when 1 small speaker is connected.
The subwoofer will produce surround back channel low-frequency
components (configurable in “Bass Cross Over”).
Small x2
(default)
Select this when 2 small speakers are connected.
The subwoofer will produce surround back channel low-frequency
components (configurable in “Bass Cross Over”).
None
Select this when no surround back speakers are connected.
The surround speakers and subwoofer (or front speakers) will produce
surround back channel audio.
Off (default)
Depending on the size of the front speakers, either the subwoofer or
front speakers produce the front channel low-frequency components.
On
Both the front speakers and subwoofer produce the front channel lowfrequency components.
• This setting is not available when “Subwoofer” is set to “None” or “Front” is set to “Small”.
❑ Bass Cross Over
Sets the lower limit of low-frequency component produced from speakers of which the
size is set to “Small”. A frequency sound lower than the specified value will be
produced from the subwoofer or front speakers
Settings
40Hz, 60Hz, 80Hz (default), 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz
❑ Front Presence
Selects whether or not presence speakers are connected.
Settings
Use (default)
Select this when presence speakers are connected.
None
Select this when no presence speakers are connected.
❑ Subwoofer
Selects whether or not subwoofer is connected and its phase.
Settings
Normal
(default)
Select this when a subwoofer is connected (not to reverse the phase).
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
Reverse
Select this when a subwoofer is connected (reverse the phase). The
subwoofer will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
Use
None
• If the volume and cross-over frequency are adjustable on your subwoofer, set the volume to half and crossover frequency to maximum.
■ Distance
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front
Presence L, Front Presence R, Subwoofer
Setting range
0.30m ~ 24.00m (1.0ft ~ 80.0ft) *0.05m (0.2ft) steps
Default
3.00m (10.0ft)
Select this when no subwoofer is connected. The front speakers will
produce LFE (low-frequency effect) channel audio and low-frequency
components from other channels.
• When the bass sound is lacking or unclear, switch the subwoofer phase.
En
92
■ Level
■ Manual equalizer adjustment
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front
Presence L, Front Presence R, Subwoofer
Setting range
-10.0dB ~ +10.0dB (0.5dB steps)
1 Set “PEQ Select” to “Manual” and press ENTER.
2 Use the cursor keys to select a speaker and press ENTER.
3 Use the cursor keys to select an item and press ENTER.
Band / Gain: You can select a center frequency from the preset 7 bands and adjust the gain.
Freq. / Gain: You can adjust the center frequency of the selected band and adjust the gain.
Q / Gain: You can adjust the Q factor (bandwidth) of the selected band and adjust the gain.
Default
0.0dB
Clear: Restores the default settings for the selected speaker.
4 Use the cursor keys to adjust parameters and press ENTER.
■ Parametric EQ
Adjusts sound quality of tone with an equalizer.
❑ PEQ Select
Setting range
Gain: -20.0dB ~ +6.0dB (0.5dB steps)
Center frequency: 31.3Hz ~ 16.0kHz
Q factor: 0.500 ~ 10.08
Selects a type of equalizer to be used.
Settings
Manual
Select this when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.
YPAO:Flat
Adjusts individual speakers to achieve the same characteristics.
YPAO:Front
Adjusts individual speakers to achieve the characteristics same as the
front speakers.
YPAO:Natural
Adjusts all speakers to achieve a natural sound.
Through
Does not use the equalizer.
5 To exit from the menu, press ON SCREEN.
■ Test Tone
• “YPAO:Flat”, “YPAO:Front” and “YPAO:Natural” are available only when the measurement results of “Auto
Setup” have already been saved (p.36).
❑ PEQ Data Copy
Enables/disabled the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Settings
Copies the parametric equalizer values acquired with “Auto Setup” (p.36) to the
“Manual” fields for fine adjustment.
Choices
Flat > Manual
Copies the “Flat” values acquired with “Auto Setup”.
Front > Manual
Copies the “Front” values acquired with “Auto Setup”.
Natural > Manual
Copies the “Natural” values acquired with “Auto Setup”.
Off (default)
Does not output test tones.
On
Outputs test tones automatically when you adjust the speaker balance,
equalizer, etc.
En
93
Sound
■ Dynamic Range
Configures the audio output settings.
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Settings
■ Lipsync
Adjusts the delay between video and audio output.
❑ Auto
Adjusts the delay between video and audio output automatically when a TV that
supports an automatic lipsync function is connected to this unit via HDMI. If necessary,
you can fine-adjust the audio output timing. “Offset” shows the difference between
automatic adjustment and fine adjustment.
Setting range
0ms ~ 250ms (1ms steps)
Default
0ms
❑ Manual
Adjusts the delay between video and audio output manually.
Setting range
0ms ~ 250ms (1ms steps)
Default
0ms
Maximum (default)
Produces audio without adjusting the dynamic range.
Standard
Optimizes the dynamic range for regular home use.
Minimum/Auto
Sets the dynamic range to make clear sound even at night or at low
volumes.
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
■ Max Volume
Sets the maximum volume so that sound is not too loud.
Setting range
-30.0dB ~ +15.0dB (5.0dB steps), +16.5dB
Default
+16.5dB
■ Initial Volume
Sets the initial volume for when this receiver is turned on.
Settings
Off (default)
Sets at the level when this unit last entered standby mode.
On
Sets at Mute, or -80.0dB ~ +16.5dB (0.5dB steps). (This setting works
only when “Max Volume” is set higher.)
■ Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level in conjunction with
volume adjustments.
Settings
Off
Does not adjust the effect level automatically.
On (default)
Adjusts the effect level automatically.
En
94
■ Processing
Video
Configures the video output settings.
Enables/disables the video signal processing (resolution and aspect ratio).
Settings
Off (default)
Disables the video signal processing.
On
Enables the video signal processing.
Select a resolution and an aspect ratio in “Resolution” and “Aspect”.
• 720p-, 1080i- and 1080p-resolution video signals cannot be converted (p.122).
❑ Resolution
■ Analog to Analog Conversion
Enables/disables the video conversion (p.122) between the analog video jacks
(COMPONENT VIDEO, S VIDEO and VIDEO).
Settings
Off
Disables the video conversion between the analog video jacks.
On (default)
Enables the video conversion between the analog video jacks.
Converted video signals are output from the MONITOR OUT jacks only.
• This unit does not convert 480-line and 576-line video signals interchangeably.
Selects a resolution to output HDMI video signals when “Processing” is set to “On”.
Settings
Through
Does not convert the resolution.
Auto (default)
Selects a resolution automatically in accordance with TV
resolution.
480p/576p, 720p, 1080i,
1080p
Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)
• If you need to select a resolution that is not supported by your TV, set “MON.CHK” (p.104) in the
“ADVANCED SETUP” menu to “SKIP” and try again. (Note that output videos may not be displayed on your
TV normally.)
• 480p/576p-, 1080i- and 720p-resolution video signals cannot be output from the VIDEO jacks (p.122).
❑ Aspect
Selects an aspect ratio to output HDMI video signals when “Processing” is set to “On”.
Settings
Through (default)
Does not convert the aspect ratio.
16:9 Normal
Outputs 4:3 video signals to a 16:9 TV with black bands on either
side of the screen.
• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i or 1080p
signals.
En
95
❑ ARC
HDMI
Enables/disables ARC (p.21) when “HDMI Control” is set to “On”.
Configures the settings related to HDMI.
Settings
Off
Disables ARC.
On (default)
Enables ARC.
• You do not need to change this setting normally. In case noises are produced from the speakers connected
to this unit because TV audio signals input to this unit via ARC are not supported by this unit, set “ARC” to
“Off” and use the TV speaker.
❑ Standby Sync
Select whether to set this unit to standby in conjunction with TV power-off when “HDMI
Control” is set to “On”.
■ HDMI Control
Enables/disables HDMI Control (p.123).
Settings
Settings
Off (default)
Disables HDMI Control.
On
Enables HDMI Control.
Configure the settings in “TV Audio Input”, “ARC” and
“Standby Sync”.
Off
Does not set this unit to standby mode in conjunction with TV
power-off.
On
Sets this unit to standby mode in conjunction with TV poweroff.
Auto (default)
Sets this unit to standby mode in conjunction with TV power-off
only when this unit is receiving TV audio or HDMI signals.
• To use HDMI control, you need to perform the HDMI Control link setup (p.123) after connecting HDMI
Control-compatible devices.
❑ TV Audio Input
Selects an audio input jack of this unit to be used for TV audio input when “HDMI
Control” is set to “On”. The input source of this unit automatically switches to TV audio
(input jack selected in here) when the TV input is switched to its built-in tuner.
Settings
AV1~6, AUDIO1~2
Default
AV4
• When using ARC to input TV audio to this unit, you cannot use the input jacks selected in here for
connecting an external device because the input will be used for TV audio input.
En
96
■ Audio Output
Network
Selects a device to output audio.
Configures the network settings.
• The “Amp” and “HDMI OUT1” settings are available only when “HDMI Control” is set to “Off”.
❑ Amp
Enables/disables the audio output from the speakers connected to this unit.
Settings
Off
Disables the audio output from the speakers.
On (default)
Enables the audio output from the speakers.
❑ HDMI OUT1, HDMI OUT2
Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or
HDMI OUT 2 jack.
Settings
■ IP Address
Configures the network parameters (IP address, etc).
❑ DHCP
Select whether to use a DHCP server.
Off (default)
Disables the audio output from the TV.
On
Enables the audio output from the TV.
■ Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when this
unit is in standby mode.
Settings
Settings
Off
Does not use a DHCP server. Configure the network parameters
manually.
On (default)
Uses a DHCP server to automatically obtain the network parameters (IP
address, etc.) of this unit.
❑ Manual Setup
Configures the network parameters of this unit manually when “DHCP” is set to “Off”.
Off (default)
Does not output videos/audio to the TV.
On
Outputs videos/audio to the TV.
(This unit consumes approximately 3 W of power.)
• This setting is available only when “HDMI Control” is set to “Off”.
Submenu
IP Address
Specifies an IP address.
Subnet Mask
Specifies a subnet mask.
Default Gateway
Specifies the IP address of the default gateway.
DNS Server (P)
Specifies the IP address of the primary DNS server.
DNS Server (S)
Specifies the IP address of the secondary DNS server.
En
97
■ Network Standby
Multi Zone
Selects whether to turn on this unit by the command from other network devices
(network standby).
Configures the multi zone settings.
Settings
Off (default)
Disables the network standby function.
On
Enables the network standby function.
(This unit consumes approximately 5 W of power.)
■ MAC Address Filter
Sets the MAC address filter to limit access to this unit from other network devices.
❑ Mode
Enables/disables the MAC address filter.
■ Zone2 Set
Configures the audio output settings for Zone2.
Settings
Off (default)
Disables the MAC address filter.
On
Enables the MAC address filter. In “Address Setup”, specify the MAC
addresses of the network devices that will be permitted access to this
unit.
❑ Address Setup
Specifies the MAC addresses (up to 10) of the network devices that will be permitted
access to this unit when “Mode” is set to “On”.
• The “Zone2 Set” settings are available only when “Power Amp Assign” (p.91) is set to “7ch+1ZONE”
❑ Max Volume
Sets the Zone2 maximum volume so that sound is not too loud.
Setting range
-30.0dB ~ +15.0dB (5.0dB steps), +16.5dB
Default
+16.5dB
❑ Initial Volume
Sets the Zone2 initial volume for when this unit is turned on.
Settings
Off (default)
Sets at the level when this unit last entered standby mode.
On
Sets at Mute, or -80.0dB ~ +16.5dB (0.5dB steps).
(This setting works only when “Max Volume” is set higher.)
En
98
■ Party Mode Set
Enables/disables switching to the party mode (p.72).
Function
Configures the functions that make this unit easier to use.
Choice
Target: Zone 2
Settings
Disable
Disables switching to the party mode.
Enable (default)
Enables switching to the party mode. You can turn on/off the party
mode by pressing PARTY on the remote control.
■ Zone Rename
Changes the zone names displayed on the TV screen.
■ Setup procedure
1 Use the cursor keys to select a zone to be renamed and press ENTER.
2 Press ENTER, use the cursor keys to rename, and then press ENTER again.
■ Auto Power Down
Sets the amount of time for auto-standby. If you do not operate this unit for the specified
time, this unit will automatically go into standby mode.
Settings
Off
Does not set this unit to standby mode automatically.
4 Hours, 8 Hours (default), Sets this unit to standby mode when you have not operated this unit for the
12 Hours
specified time.
■ Display Set
Configures the settings related to the front display and TV screen display.
3 Use the cursor keys to select “OK” and press ENTER.
❑ Front Panel Display
Configures the front display settings.
Dimmer
• To clear the entry, select “CLEAR”.
4 To exit from the menu, press ON SCREEN.
Adjusts the brightness of the front display.
Setting range
-4 ~ 0 (higher to brighten)
Default
0
Scroll
Sets the scrolling manner of the front display.
The display scrolls automatically if the text exceeds 14 characters.
Settings
Continue (default)
Sets the display to scroll continuously.
Once
Sets the display to scroll all characters once and then halt scrolling for
display of the first 14 characters.
En
99
❑ Short Message
Selects whether to display short messages on the TV screen when this unit is operated
(input selection, volume adjustment, etc).
Zone2
When “Trigger Mode” is set to “Power,” electronic signal transmission is
synchronized with power status of Zone2.
When “Trigger Mode” is set to “Source,” electronic signal transmission is
synchronized with input switching in Zone2.
All (default)
When “Trigger Mode” is set to “Power,” electronic signal transmission is
synchronized with power status of the main zone or Zone2.
When “Trigger Mode” is set to “Source,” electronic signal transmission is
synchronized with input switching in the main zone or Zone2.
Settings
On (default)
Displays short messages on the TV screen.
Off
Does not display short messages on the TV screen.
❑ Wall Paper
❑ Target Source
Selects a wall paper displayed on the TV.
Specifies the output level of the electronic signal transmitted with each input switching
when “Trigger Mode” is set to “Source”.
Settings
Picture1, Picture2, Picture3
Displays the selected image on the TV screen when there
is no video signal.
Gray
Displays a gray background on the TV screen when there
is no video signal.
■ Trigger Output
Sets the TRIGGER OUT jack to function synchronized with power status of each zone or
input switching.
❑ Trigger Mode
Specifies the condition for the TRIGGER OUT jack to function.
Settings
Power (default)
Choices
HDMI1~7, AV1~6, V-AUX, AUDIO1~2, TUNER, PHONO, (network sources), USB, DOCK
Settings
Low
Stops the electronic signal transmission when you switch to the input source
specified in this option.
High (default)
Transmits the electronic signal when you switch to the input source
specified in this option.
❑ Manual
Switches the output level for electronic signal transmission manually when “Trigger
Mode” is set to “Manual”. This setting can also be used to confirm proper function of
the external component connected via the TRIGGER OUT jack.
Choices
The TRIGGER OUT jack functions synchronized with the power status of the zone
specified with “Target Zone.”
Source
The TRIGGER OUT jack functions synchronized with the input switching in
the zone specified with “Target Zone.”
Electronic signal is transmitted according to the setting made in “Target
Source.”
Manual
Select this to manually switch the output level for electronic signal transmission with
“Manual.”
Low
Stops the electronic signal transmission.
High (default)
Transmits the electronic signal.
■ Memory Guard
Prevents accidental changes to the settings.
Settings
❑ Target Zone
Off (default)
Does not protect the settings.
Specifies the zone with which the TRIGGER OUT jack functions synchronized.
On
Protects the settings until “Off” is selected.
Settings
Main
When “Trigger Mode” is set to “Power,” electronic signal transmission is
synchronized with power status of the main zone.
When “Trigger Mode” is set to “Source,” electronic signal transmission is
synchronized with input switching in the main zone.
En
100
Language
Select an on-screen menu language.
Viewing information about this unit
(Information menu)
You can view information about this unit using the TV screen.
1 Press ON SCREEN.
2 Use the cursor keys to select “Information” and press ENTER.
Settings
English (default)
English
Japanese
Français
French
Deutsch
German
Español
Spanish
3 Use the cursor keys (
/ ) to select an information type.
Russian
• The information on the front display is provided in English only.
4 To exit from the menu, press ON SCREEN.
En
101
■ Network
Types of information
Displays the network information on this unit.
■ Audio Signal
IP Address
IP address
Displays information about the current audio signal.
Subnet Mask
Subnet mask
Default Gateway
The IP address of the default gateway
DNS Server (P)
The IP address of the primary DNS server
Format
Audio format of the input signal
Channel
The number of source channels in the input signal (front/
surround/LFE)
For example, “5.1 (3/2/0.1)” means 5.1ch in total (3 front
channels, 2 surround channels, and LFE).
Input
Sampling
The number of samples per second of the input digital signal
Bitrate
The amount of data per second of the input bitstream signal
Dialogue
Output
DNS Server (S)
The IP address of the secondary DNS server
MAC Address
MAC address
Status
Network connection status
The dialogue normalization level of the input bitstream signal
■ System
The speaker terminals from which signals are output
Displays the system information on this unit.
• Even when this unit is set to output bitstream signals directly, the signal may be converted depending on
the specifications and settings of the playback device.
■ Video Signal
Remote ID
The remote control ID setting of the main unit (p.104)
TV Format
The video signal type setting of this unit (p.104)
Speaker Impedance
The speaker impedance setting of this unit (p.103)
System ID
System ID number
Firmware Version
The version of firmware installed on this unit
Displays information about the current video signal.
HDMI Signal
Presence or absence of HDMI signal input/output
HDMI Resolution
Resolutions of input signal (analog or HDMI) and output signal (HDMI)
Analog Resolution
Resolutions of input signal (analog) and signal output at the MONITOR
OUT jacks (analog)
HDMI Error
Errors related to HDMI
HDCP Error: The TV does not support HDCP (High-bandwidth Digital
Content Protection).
Device Over: The number of devices connected to the HDMI OUT jack is
over the limit.
• If this unit detects a newer firmware over the network, “!” (exclamation mark) appears at the upper right of
the “Information” and “System” icons, and the corresponding message will be displayed in this screen. You
can update the firmware of this unit by pressing ENTER in this screen and following the procedure in
“Updating the firmware of this unit” (p.110).
■ Zone
Displays information about Zone2.
Input
The input source selected for Zone2
Volume
The volume setting for Zone2
■ HDMI Monitor
Displays information about the TVs connected to the HDMI OUT jacks.
Use the cursor keys ( / ) to switch between “OUT1” and “OUT2”.
Interface
TV interface
Video Resolution
Resolutions supported by the TV
En
102
ADVANCED SETUP menu items
Configuring the system settings
(ADVANCED SETUP menu)
Item
Function
You can configure the system settings of this unit using the front display.
SP IMP.
Changes the speaker impedance setting.
103
1 Set this unit to standby mode.
2 While holding down STRAIGHT on the font panel, press MAIN ZONE
REMOTE ID
Selects the remote control ID of the main unit.
104
TV FORMAT
Switches the video signal type.
104
MAIN ZONE
PROGRAM
STRAIGHT
3 Press PROGRAM to select an item.
4 Press STRAIGHT to select a setting.
MAIN ZONE to set this unit to standby mode and turn it on
5 Press
again.
The new settings become effective.
.
Page
MON.CHK
Removes the limitation on HDMI video output.
104
INIT
Restores the default settings.
104
UPDATE
Updates the firmware.
105
VERSION
Checks the version of firmware currently installed on
this unit.
105
Changing the speaker impedance setting (SP IMP.)
SPIMP.-8MIN
Change the speaker impedance settings of unit depending on the impedance of the
speakers connected.
Settings
6 Ω MIN
Select this when you connect 6-ohm speakers to this unit. You can also
use 4-ohm speakers as the front speakers.
8 Ω MIN (default)
Select this when you connect 8-ohm or higher speakers to this unit.
En
103
Selecting the remote control ID (REMOTE ID)
REMOTEID-ID1
Select the remote control ID of the main unit so that it matches to the ID of the remote
control (default: ID1). When using multiple Yamaha AV receivers, you can set each
remote control with a unique remote control ID for its corresponding receiver.
Settings
ID1 (default), ID2
■ Changing the remote control ID of the remote control
Perform each of the following steps within 1 minute. Otherwise, the setting will be
automatically canceled.
1 Press CODE SET on the remote control using a pointed object such as the tip of a
ballpoint pen.
2 Press SOURCE/RECEIVER.
3 Use the numeric keys to enter “5019” (ID1) or “5020” (ID2).
Once the remote control ID is registered successfully, SOURCE/RECEIVER blinks twice.
If it blinks 6 times, registration failed. Repeat from step 1.
Switching the video signal type (TV FORMAT)
TVFORMAT-PAL
Switch the video signal type of this unit so that it matches to the format of your TV.
Settings
NTSC, PAL (default)
Removing the limitation on HDMI video output
(MON.CHK)
MON.CHK-YES
This unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jacks.
If you want to select a resolution in “Resolution” (p.95) regardless of the detection
results or if this unit does not detect it correctly, disable the monitor check function.
Settings
YES (default)
Enables the monitor check function. (Outputs video signals with a
resolution supported by the TV only.)
SKIP
Disables the monitor check function. (Outputs video signals with a
specified resolution regardless of compatibility with the TV.)
• The registered remote control codes (p.106) are not cleared even if you change the remote control ID.
• In case this unit becomes inoperable because videos from this unit cannot be displayed on the TV after
“MON.CHK” is set to “SKIP”, reset the setting to “YES.
Restoring the default settings (INIT)
INIT-CANCEL
Restores the default settings for the selected item.
Choices
VIDEO
Restores the default settings for video configurations.
ALL
Restores the default settings for this unit.
CANCEL
Does not perform an initialization.
En
104
Updating the firmware (UPDATE)
New firmware will be released irregularly for the purpose of additional features or
product improvements. It can be downloaded from our website. If this unit is connected
to the Internet, you can download the firmware via the network. For details, refer to the
information supplied with updates.
VOL.
MUTE
UPDATE-USB
SW PR
PL
C
L
R
SL
SR
SBL SB SBR
■ Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1 Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to start
firmware update.
Choices
USB
Update the firmware using a USB memory device.
NETWORK
Update the firmware via the network.
• If this unit detects a newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the firmware of this unit by following the
procedure in “Updating the firmware of this unit” (p.110).
Checking the firmware version (VERSION)
Check the version of firmware currently installed on this unit.
VOL.
MUTE
VERSION-x.xx
SW PR
PL
C
L
R
SL
SR
SBL SB SBR
• You can also check the firmware version in “System” (p.102) in the “Information” menu.
En
105
MAIN
ZONE 2
CODE SET
SOURCE RECEIVER
CODE SET
SOURCE/RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
FM
AM
PRESET
TUNING
INFO
MEMORY
Controlling external devices with the remote control
By setting the code for external devices (BD/DVD players, etc.),
you can operate it with the remote control of this unit.
AV
• You cannot control an external device that does not have a remote control sensor.
• Make sure the remote control ID of the external device is set to “ID1”. If any other
ID is selected, the remote control operations may not work properly.
• If the remote control is without batteries for more than 2 minutes, the registered
codes may be cleared. In this case, insert new batteries and setting the codes
again.
SUR. DECODE STRAIGHT
MOVIE
MUSIC
SLEEP
PARTY
ENHANCER PURE DIRECT
SCENE
BD
DVD
TV
CD
RADIO
• When HDMI control of both this unit and playback device such as a BD/DVD
player are enabled, you may be able to control the device with the remote control
without registering the remote control code.
OPTION
ON SCREEN
DISPLAY
A
POP-UP
MENU
TOP
MENU
Once you have set the remote control code for your TV, you can
control it using the TV operation keys regardless of an input source
selected on this unit.
MUTE
By setting the remote control code for your TV, you can operate it
with the remote control of this unit.
1
2
3
4
5
6
7
8
9
0
10
ENT
INPUT
TV CH
HDMI OUT
TV operation keys
INPUT
Switches the video inputs of the TV.
MUTE
Mutes the audio output of the TV.
TV VOL
Adjust the volume of the TV.
TV CH
Switch the channels of the TV
TV
Turns on/off the TV.
Numeric keys
TV
TV VOL
■ TV operations
Setting the remote control code for a TV
MODE
MUTE
Once the remote control code is set successfully,
SOURCE/RECEIVER blinks twice.
If it blinks 6 times, registration failed. Repeat from step 2.
VOLUME
ENTER
RETURN
3 Press TV
the numeric keys to enter the 4-digit remote
4 Use
control code.
TV operation keys
TV
• You can also register a remote control code of your TV to the input selection keys
(p.107). In this case, you can use the cursor keys or numeric keys to operate the
TV depending on its model. However, you need to press the corresponding input
selection key to play back TV audio on this unit.
• You can also assign a function to each key using the learning function (p.108).
“Remote Control Code Search” in the CD-ROM
1 Use
to find a remote control code for your TV.
• If multiple remote control codes exist, first set the first code in the list, if it
does not work then try the other codes.
CODE SET using a pointed object such as the
2 Press
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. In this case, repeat
from step 2.
En
106
MAIN
ZONE 2
CODE SET
SOURCE RECEIVER
SOURCE
CODE SET
SOURCE/RECEIVER
Setting the remote control codes for
playback devices
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
PRESET
TUNING
AV
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
Input selection key
• At the factory, Yamaha CD player code (5095) is set for AV3. For the other input
selection keys, no codes are set.
SUR. DECODE STRAIGHT
• You can also assign a function to each key using the learning function (p.108).
ENHANCER PURE DIRECT
SCENE
BD
DVD
TV
CD
VOLUME
ENTER
RETURN
DISPLAY
D
POP-UP
MENU
TOP
MENU
Menu operation keys
1
2
3
4
5
6
7
8
9
0
Numeric keys
TV operation keys
TV CH
• By pressing SOURCE/RECEIVER, you can switch the devices (this unit or
external device) to operate with the menu operation keys, DISPLAY and numeric
keys. You can operate this unit when SOURCE/RECEIVER lights up in orange,
and an external device when SOURCE/RECEIVER lights up in green.
For example, if you register the remote control code of your external device on
TUNER, you can operate FM/AM radio built in this unit when SOURCE/
RECEIVER lights up in orange, and the external device when SOURCE/
RECEIVER lights up in green.
SOURCE
Menu operation
keys
HDMI OUT
Turns on/off the playback device.
Cursor keys
Select an item.
ENTER
Confirms a selected item.
RETURN
Returns to the previous screen.
TOP MENU
Displays the top menu.
POP-UP MENU
Displays the pop-up menu.
DISPLAY
ENT
TV
INPUT
TV VOL
Once you have registered the remote control code for your
playback device, you can control it using the following keys after
selecting the input source or scene.
DISPLAY
External device
operation keys
10
device.
MUTE
MODE
MUTE
“Remote Control Code Search” in the CD-ROM
1 Use
to find a remote control code for your playback
RADIO
OPTION
ON SCREEN
By setting the remote control codes for your playback devices, you
can operate those devices with the remote control of this unit. Since
the codes are assigned to each input source key, you can select
the input source and device to control with the remote control
concurrently.
■ Playback device operations
• If multiple remote control codes exist, first set the first code in the list, if it
does not work then try the other codes.
CODE SET using a pointed object such as the
2 Press
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. In this case, repeat
from step 2.
Stops playback.
Stops playback temporarily.
External device
operation keys
For example, press HDMI1 to set the remote control code
for the playback device connected to the HDMI1 jack.
Once the remote control code is registered successfully,
SOURCE/RECEIVER blinks twice.
If it blinks 6 times, registration failed. Repeat from step 2.
Starts playback of the selected song/
video.
Search forward/backward (by holding
down).
3 Press a corresponding input selection key.
the numeric keys to enter the 4-digit remote
4 Use
control code.
Switches information on the display.
Skip forward/backward.
Numeric keys
Enter numerical values.
TV operation keys
Control the TV (p.106).
• These keys work only when the corresponding function is available on your
playback device and is possible to be operated with an infrared remote control.
• For details on how to register the input selection key applied the remote
control code on a corresponding SCENE key, refer to “Configuring scene
assignments” (p.44).
En
107
MAIN
ZONE 2
CODE SET
SOURCE RECEIVER
SOURCE
CODE SET
SOURCE/RECEIVER
Programming from other remote controls
(learning)
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
PRESET
TUNING
The remote control of this unit can receive remote control signals
from other remote controls and learn the remote control operation. If
you cannot find a remote control code for your playback device or if
any key on the remote control does not work after you set the
remote control code, use the learning function to assign a function
to each key.
AV
FM
AM
INFO
MEMORY
CODE SET using a pointed object such as the
1 Press
tip of a ballpoint pen.
SUR. DECODE STRAIGHT
MOVIE
MUSIC
SLEEP
PARTY
ENHANCER PURE DIRECT
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. In this case, repeat
from step 1.
SCENE
BD
DVD
TV
CD
RADIO
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
POP-UP
MENU
TOP
MENU
MUTE
External device
operation keys
MODE
1
2
3
5
6
7
9
0
10
4
8
TV
TV VOL
TV CH
Numeric keys
ENT
INPUT
MUTE
Menu operation keys
DISPLAY
A
HDMI OUT
TV operation keys
TV
one of the following keys depending on the
2 Press
type of your device.
For playback device: press the input selection key
(corresponding to the input jacks where the device is
connected).
For TV: press TV .
3 Use the numeric keys to enter “9990”.
the infrared transmitters of the remote controls
4 Aim
at each other.
Remote control of external device
5 Perform the following steps within 10 seconds.
a On this unit, press one of the following keys to which you want to
assign a function.
For playback device: SOURCE
external device operation keys
, menu operations keys,
For TV: TV operation keys
b On the external device, press the key from which the operation
is learned.
Once the operation is learned successfully, SOURCE/
RECEIVER blinks twice.
If it blinks 6 times, learning failed. Repeat step 5.
step 5 until all desired operations are
6 Repeat
learned.
CODE SET using a pointed object such as the
7 Press
tip of a ballpoint pen.
SOURCE/RECEIVER blinks once.
Note
• If you press SOURCE/RECEIVER in step 2, you can assign functions of an
external receiver to the menu operation keys, external device operation keys
or numeric keys. However, it makes these keys to control this unit impossible.
If you need to restore the remote control code for this unit, perform the
following steps.
a Press CODE SET using a pointed object such as the tip of a ballpoint pen.
b Press SOURCE/RECEIVER.
c Use the numeric keys to enter “9992”.
2
6
USB
DOCK
ZONE 2
5
AUDIO
MAIN
1
6
1
5
NET
2
HDMI
3
4
V-AUX
4
CODE SET
7
TUNING
3
SOURCE RECEIVER
AV
PRESET
SUR. DECODE STRAIGHT
AM
MEMORY
PHONO
MUSIC
RADIO
FM
INFO
CD
ENHANCER PURE DIRECT
TUNER
MOVIE
PARTY
OPTION
SCENE
TV
SLEEP
BD
DVD
ON SCREEN
5 to 10 cm apart
En
108
MAIN
ZONE 2
CODE SET
SOURCE RECEIVER
CODE SET
SOURCE/RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
AV
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
PRESET
TUNING
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
BD
DVD
TV
Input selection key
• The settings for controlling playback devices after selecting a scene (p.44) will be
also cleared.
CODE SET using a pointed object such as the
1 Press
tip of a ballpoint pen.
ENHANCER PURE DIRECT
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. In this case, repeat
from step 1.
SCENE
RADIO
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
2 Press SOURCE/RECEIVER.
3 Use the numeric keys to enter “9981”.
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
MODE
1
2
3
5
6
7
9
0
10
4
8
Numeric keys
TV
MUTE
TV
TV CH
Once the remote control codes are reset successfully,
SOURCE/RECEIVER blinks twice.
If it blinks 6 times, resetting failed. Repeat from step 1.
ENT
INPUT
TV VOL
■ Resetting all remote control codes
You can clear all remote control codes (including functions learned
from other remote controls) and restore the default settings.
SUR. DECODE STRAIGHT
CD
Resetting remote control codes
HDMI OUT
■ Clearing functions learned from other
remote controls
❑ Clearing the assignment of each key
CODE SET using a pointed object such as the
1 Press
tip of a ballpoint pen.
3 Use the numeric keys to enter “9991”.
4 Press the key that you want to reset.
Once the key assignment is cleared successfully,
SOURCE/RECEIVER blinks twice.
If it blinks 6 times, clearing failed. Repeat from step 2.
step 4 until all desired key assignments are
5 Repeat
cleared.
CODE SET using a pointed object such as the
6 Press
tip of a ballpoint pen.
SOURCE/RECEIVER blinks once.
❑ Clearing the key assignments for each input source
CODE SET using a pointed object such as the
1 Press
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. In this case, repeat
from step 1.
one of the following keys to select the device
2 Press
for which key assignments will be cleared.
For playback device: press the input selection key.
For TV: press TV .
3 Use the numeric keys to enter “9992”.
Once the key assignment is cleared successfully,
SOURCE/RECEIVER blinks twice.
If it blinks 6 times, clearing failed. Repeat from step 1.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. In this case, repeat
from step 1.
one of the following keys to select the device
2 Press
for which key assignments will be cleared.
For playback device: press the input selection key.
For TV: press TV .
En
109
MAIN
ZONE 2
CODE SET
Updating the firmware of this unit
SOURCE RECEIVER
HDMI
1
2
3
4
5
6
7
V-AUX
1
2
3
4
5
6
AUDIO
DOCK
TUNER
PHONO
NET
USB
If this unit is connected to the Internet, the corresponding message
will be displayed on the TV when a newer firmware is available. In
this case, follow the procedure below to update the firmware of this
unit.
AV
“UPDATE SUCCESS PLEASE POWER OFF!”
3 Ifappears
on the front display, press MAIN ZONE
on the front panel.
The firmware update is complete.
Note
FM
AM
INFO
MEMORY
MOVIE
MUSIC
SLEEP
PARTY
PRESET
• Do not operate this unit or disconnect the power cable or network cable during
firmware update. Firmware update takes about 15 minutes.
TUNING
SUR. DECODE STRAIGHT
ENHANCER PURE DIRECT
SCENE
BD
DVD
TV
CD
RADIO
• You can also update the firmware using the USB memory device from the
“ADVANCED SETUP” menu (p.105).
OPTION
ON SCREEN
VOLUME
ENTER
RETURN
POP-UP
MENU
TOP
MENU
Cursor keys
ENTER
DISPLAY
A
If the following message is displayed after ON SCREEN is pressed,
firmware update is available.
MUTE
Information
icon
MODE
1
2
3
5
6
7
9
0
10
• If you want to update the firmware later, select “CLOSE” in step 2. In this
case, “!” (exclamation mark) appears at the upper right of the “Information”
and “System” icons, and the corresponding message will be displayed in the
“System” screen (p.102). You can update the firmware of this unit by
pressing ENTER in the “System” screen.
4
8
ENT
TV
INPUT
TV VOL
TV CH
HDMI OUT
MUTE
1 Read the on-screen description.
start the firmware update, use the cursor keys to
2 To
select “START” and press ENTER.
The on-screen display turns off.
Message
System icon
En
110
APPENDIX
Frequently asked questions
The new speaker system does not provide an ideal sound
balance...
I want to turn off the onscreen messages displayed during
operations...
If you have changed speakers or speaker system, use “Auto Setup” to optimize the
speaker settings again (p.36). If you want to adjust the speaker settings manually, use
“Manual Setup” in the “Setup” menu (p.91).
By default, short messages are displayed on the TV screen when this unit is operated
(input selection, volume adjustment, etc). In case that the short messages bother you
when you are watching movies or sports, configure “Short Message” (p.100) in the
“Setup” menu to turn off the short messages.
Since we have small children, we want to set limitations on the
volume control...
If a small child, etc. accidentally operates the controls on the main unit or remote
control, the volume may suddenly increase. And this may cause injury or damage this
unit or speakers. We recommend using “Max Volume” in the “Setup” menu to set the
maximum volume level for this unit in advance (p.94). You can also set the maximum
volume for Zone2 (p.98).
I am occasionally startled by a sudden large sound when
turning on this unit...
By default, the volume level when this unit last entered standby mode is automatically
applied. If you want to fix the volume, use “Initial Volume” to set the volume to be
applied when this receiver is turned on (p.94). You can also set the initial volume for
Zone2 (p.98).
I made HDMI connections but HDMI Control does not work at
all...
To use HDMI Control, you need to perform the HDMI Control link setup (p.123). After
connecting HDMI Control-compatible devices (TV, BD/DVD players, etc.) to this unit,
enable HDMI Control on each device and perform the HDMI Control link setup. This
setup is required every time when you add a new HDMI Control-compatible device to
your system. For information on how HDMI Control works between your TV and
playback devices, refer to the instruction manuals of each device.
I want to prevent accidental changes to the settings...
You can protect the settings configured on this unit (speaker settings, etc.) by utilizing
“Memory Guard” in the “Setup” menu (p.100).
The web control screen (p.74) becomes inaccessible...
If you are using a DHCP server, the IP address of this unit may change each time this
unit is turned on. Check the IP address of this unit in “Network” (p.102) in the
“Information” menu. Also, if you have enabled “MAC Address Filter” (p.98), you need to
specify the MAC address of your PC in “Address Setup” (p.98) to allow the PC to
access this unit. For information on how to check the MAC address of your PC, refer to
the instruction manuals of it.
The supplied remote control concurrently controls this unit and
another Yamaha product that is not intended...
When using multiple Yamaha products, the supplied remote control may work on
another Yamaha product or another remote control may work on this unit. In this case,
set each remote control with a unique remote control ID for its corresponding receiver
(p.104).
En
111
Troubleshooting
Refer to the table below when this unit does not function properly.
If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
First, check the followings:
a The power cables of this unit, TV and playback devices (BD/DVD player, etc.) are connected to AC outlets securely.
b This unit, subwoofer, TV and playback devices (BD/DVD player, etc.) are turned on.
c The connectors of each cable are inserted to jacks on each devices securely.
Power and system
Problem
Cause
Remedy
The power does not turn on.
The protection circuitry has been activated 3 times consecutively.
As a safety precaution, capability to turn on the power is disabled. Contact your
nearest Yamaha dealer or service center to request repair.
The power does not turn off.
The internal microcomputer is hung-up due to an external electric
shock (such as lightning and excessive static electricity) or by a
drop in power supply voltage.
Hold down MAIN ZONE
and reboot this unit.
The power turns off (standby mode)
immediately.
This unit was turned on while a speaker cable was shorted.
Twist the bare wires of each speaker cable firmly and reconnect to this unit and
speakers (p.19).
The sleep timer worked.
Turn on the unit and start playback again.
Since this unit was not operated for the specified time, autostandby worked.
To disable auto-standby, set “Auto Power Down” in the “Setup” menu to “Off”
(p.99).
The unit enters
standby mode automatically.
This unit is uncontrollable.
on the front panel for more than 10 seconds to initialize
The speaker impedance setting is incorrect.
Set the speaker impedance to match your speakers (p.103).
The protection circuitry has been activated because of a short
circuit.
Twist the bare wires of each speaker cable firmly and reconnect to this unit and
speakers (p.19).
The internal microcomputer is hung-up due to an external electric
shock (such as lightning and excessive static electricity) or by a
drop in power supply voltage.
Hold down MAIN ZONE
and reboot this unit.
on the front panel for more than 10 seconds to initialize
En
112
Audio
Problem
No sound.
The volume cannot be increased.
No sound is heard from a specific
speaker.
No sound is heard from the surround
back speaker.
No sound is heard from the subwoofer.
No sound from the playback device
(connected to this unit with HDMI).
Cause
Remedy
Another input source is selected.
Select an appropriate input source with the input selection keys
Signals that this unit cannot reproduce are being input.
Some digital audio formats cannot be played back on this unit. To check the
audio format of the input signal, use “Audio Signal” in the “Information” menu
(p.102).
The cable connecting this unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
The maximum volume is set.
Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.94).
Any device connected to the output jacks of this unit is not turned
on. (This may happen due to the nature of AV receivers.)
Turn on all devices connected to the output jacks of this unit
The playback source does not contain corresponding channel
signals.
To check it, select “7ch Stereo” (p.45).
The sound program/decoder currently selected does not use the
corresponding speaker.
To check it, select “7ch Stereo” (p.45).
Audio output of the corresponding speaker is disabled.
Perform “Auto Setup” (p.36) or use “Configuration” in the “Setup” menu to change
the speaker setting (p.91).
The volume of the corresponding speaker is too low.
Perform “Auto Setup” (p.36) or use “Level” in the “Setup” menu to adjust the
speaker volume (p.93).
The speaker cable connecting this unit and corresponding
speaker is defective.
If there is no problem with the connection, replace with another speaker cable.
The corresponding speaker is malfunctioning.
To check it, replacing with another speaker. If the problem persists, this unit may
be malfunctioning.
The extended surround is disabled.
Use “Extended Surround” in the “Option” menu to select a decoder to be used
(p.79).
The playback source does not contain LFE or low-frequency
signals.
To check it, set “Extra Bass” in the “Setup” menu to “On”, to output the front
channel low-frequency components from the subwoofer (p.92).
Subwoofer output is disabled.
Perform “Auto Setup” (p.36) or set “Subwoofer” in the “Setup” menu to “Use”
(p.92).
The subwoofer is turned off by the auto-standby function on it.
Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
To check it, use “Video Signal” in the “Information” menu (p.102).
This unit is set not to output audio input through HDMI jacks from
the SPEAKERS terminals.
In “Audio Output” in the “Setup” menu, set “Amp” to “On” (p.97).
The number of devices connected to the HDMI OUT jack is over
the limit.
Disconnect some of the HDMI devices.
En
113
Problem
No sound from the TV (when HDMI
Control is used).
Only the front speakers work on multichannel audio.
Noise/hum is heard.
The sound is distorted.
Cause
Remedy
(If the TV is connected to this unit with an audio cable)
The TV audio input setting does not match the actual connection.
Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack
(p.96).
(If you are trying to use ARC)
ARC is disabled on this unit or TV.
Set “ARC” in the “Setup” menu to “On” (p.96). Also, enable ARC on the TV.
The playback device is set to output 2-channel audio (PCM, etc.)
only.
Change the digital audio output setting on the playback device.
This unit is too close to other digital or radio frequency device.
Move this unit further away from such device.
The cable connecting this unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
Any device connected to the output jacks of this unit is not turned
on. (This may happen due to the nature of AV receivers.)
Turn on all devices connected to the output jacks of this unit
Video
Problem
Cause
Another input source is selected on this unit.
No video.
No video from the playback device
(connected to this unit with HDMI).
Remedy
Select an appropriate input source with the input selection keys
Another input source is selected on the TV.
Switch the TV input to display the video from this unit.
The video signal output from this unit is not supported by the TV.
Set “MON.CHK” in the “ADVANCED SETUP” menu to “YES” (p.104).
The cable connecting this unit and TV (or playback device) is
defective.
If there is no problem with the connection, replace with another cable.
The input video signal (resolution) is not supported by this unit.
To check the information about the current video signal (resolution), use “Video
Signal” in the “Information” menu (p.102). For information about video signals
supported by this unit, see “HDMI signal compatibility” (p.124).
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
To check it, use “Video Signal” in the “Information” menu (p.102).
The number of devices connected to the HDMI OUT jack is over the
limit.
Disconnect some of the HDMI devices.
En
114
FM/AM radio
Problem
Cause
There is multi-path interference.
FM radio reception is weak or noisy.
AM radio reception is weak or noisy.
Remedy
Adjust the FM antenna height or orientation, or place it in a different location.
Press MODE to select monaural FM radio reception (p.50).
Your area is too far from the FM station transmitter.
Use an outdoor FM antenna commercially available. We recommend using a
sensitive multi-element antenna.
The noises may be caused by fluorescent lamps, motors,
thermostats, or other electrical equipment.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna commercially available.
Select the station manually (p.50).
Your area is too far from the FM station transmitter.
Radio stations cannot be selected
automatically.
Use an outdoor antenna commercially available. We recommend using a
sensitive multi-element antenna.
Adjust the AM antenna orientation.
Select the station manually (p.50).
The AM radio signal is weak.
Use an outdoor AM antenna commercially available. Connect it to the ANTENNA
(AM) jack together with the supplied AM antenna.
AM radio stations cannot be registered
as presets.
“Auto Preset” has been used.
“Auto Preset” is for registering FM radio stations only. Register AM radio stations
manually (p.50).
USB and network
Problem
Cause
Remedy
This unit does not detect the USB
device.
The USB cable connecting this unit and USB device is not
compliant with USB 2.0.
Use a USB cable compliant with USB 2.0.
Folders and files in the USB device
cannot be viewed.
The folder structure not supported by this unit is applied.
This unit supports folder hierarchies of up to 8 levels and up to 500 items (total of
files and subfolders) per folder. If necessary, modify the folder structure on your
USB device.
The network feature does not function.
The network parameters (IP address) is not obtained properly.
Enable the DHCP server function on your router and set “DHCP” in the “Setup”
menu to “On” on this unit (p.97). If you want to configure the network parameters
manually, make sure using an IP address which is not used by other network
devices in your network (p.97).
The media sharing setting is not correct.
Configure the sharing setting and select this unit as a device to which music
contents are shared (p.64).
Some security software installed on your PC is blocking the access
of this unit to your PC.
Check the settings of security software installed on your PC.
This unit and PC are not in the same network.
Check the network connections and the settings of your router to connect them to
the same network.
This unit does not detect the PC.
En
115
Problem
The files in the PC cannot be viewed or
played back.
The Internet radio cannot be played.
Cause
Remedy
The files are not supported by this unit or the media server.
Use the file format supported by both this unit and the media server. For
information about the file formats supported by this unit, see “Playing back music
stored on PCs” (p.64).
The selected Internet radio station is currently not available.
It may not be available to listen because there might be a network problem, or the
station might be broadcasting in limited hour. Try the station later or select another
station.
The selected Internet radio station broadcasts audio silence
currently.
Some Internet radio stations broadcast audio silence during particular periods of
time in a day. Try the station later or select another station.
Access to the network is restricted by the firewall settings of your
network devices (router, etc).
Check the firewall settings of your network devices. The Internet radio can be
played only when it passes through the port designated by each radio station.
The port number is variable depending on radio station.
Remote control
Problem
This unit cannot be controlled using the
remote control.
External devices cannot be controlled
using the remote control.
The remote control does not learn new
functions.
Cause
Remedy
Out of the operating range.
Use the remote control in the operating range (p.5).
The batteries are weak.
Replace with new batteries.
Direct sunlight or lighting is striking the remote control sensor of
this unit.
Adjust the lighting angle, or reposition this unit.
The remote control is set to control external devices.
Press SOURCE/RECEIVER to set the remote control to control this unit (the key
lights up in orange).
The remote control IDs of the main unit and remote control are not
identical.
Change the remote control ID of the main unit or remote control (p.104).
The remote control is set to control this unit.
Press SOURCE/RECEIVER to set the remote control to control external devices
(the key lights up in green).
The corresponding remote control code is not set properly.
Set the remote control code again (p.106). Even if the remote control code is
registered properly set, some products may not respond to the remote control.
The batteries of the remote control of this unit and/or the external
device are weak.
Replace with new batteries.
The distance between the two remote controls is not appropriate.
Place the remote controls at a proper distance (p.108).
The signal coding or modulation of the other remote control is not
compatible with this remote control.
Learning is impossible in this case.
Memory capacity is full.
Clear unnecessary assignments to free some memory space for the new
functions (p.109).
En
116
Error indications on the front display
Message
(alphabetical order)
Access denied
Access error
Cause
Access to the PC is denied.
Remedy
Configure the sharing setting and select this unit as a device to which music contents are shared (p.64).
This unit cannot access the USB device.
Turn off this unit and reconnect your USB device. If the problem persists, try another USB device.
This unit cannot access the iPod connected to the USB jack.
Turn off the iPod and turn on it again.
Make sure your router and modem are turned on.
There is a problem with the signal path from the network to this unit.
Check the connection between this unit and your router (or hub) (p.31).
No device
This unit cannot detect the USB device.
Turn off this unit and reconnect your USB device. If the problem persists, try another USB device.
This unit cannot detect the iPod connected to the USB jack.
Turn off the iPod and turn on it again.
(When pairing)
Turn on the Bluetooth component and set it in pairing mode.
Not found
The Bluetooth component is not found.
(When establishing a wireless connection)
- Turn on the Bluetooth component.
- Place the Bluetooth component within 10 m of the Bluetooth receiver.
- Perform pairing again.
Unknown iPod
The connected iPod is not supported by the unit.
Use an iPod supported by this unit (p.54).
The unit cannot play back the songs stored on the iPod for some
reasons.
Check the song data. If it cannot be played on the iPod itself, the song data or storage area may be
defective.
The unit cannot play back the songs stored on the PC for some
reasons.
Check if the format of files you are trying to play is supported by this unit. For information about the
formats supported by this unit, see “Playing back music stored on PCs” (p.64). If this unit cannot play
back any files, the network may be overloaded with heavy traffic, and playback is interrupted.
Over current passes through the USB device.
Turn off this unit and reconnect your USB device. If the problem persists, try another USB device.
Unable to play
USB Overloaded
En
117
Ideal speaker layout
Use this diagram as guide. You do not need to adjust the speaker layout to the following diagram exactly.
0.5 to 1 m
0.5 to 1 m
1.8 m
1.8 m
Turn it slightly inward to
reduce wall reflections.
Turn it slightly inward to
reduce wall reflections.
Front speaker (L)
60° 60°
Front speaker (R)
Center speaker
80°
80°
Surround speaker (L)
Surround speaker (R)
30 cm or more
Presence speaker (L)
Presence speaker (R)
Surround back speaker (L)
Surround back speaker (R)
Subwoofer
En
118
Glossary
Audio information
Audio and video synchronization (Lipsync)
Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem, and the capability of
maintaining audio and video signals synchronized during post-production and transmission.
Whereas the audio and video latency requires complex end-user adjustment, HDMI version 1.3 incorporates an
automatic audio and video syncing capability that allows devices to perform this synchronization automatically and
accurately without user interaction.
Bi-amplification connection (Bi-amp)
A bi-amplification connection uses two amplifiers for a speaker. One amplifier is connected to the woofer section of a
loudspeaker while the other is connected to the combined mid and tweeter section. With this arrangement each
amplifier operates over a restricted frequency range. This restricted range presents each amplifier with a much simpler
job and each amplifier is less likely to influence the sound in some way.
CINEMA DSP
Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in
a theater having many speakers designed for acoustic effects. Since home conditions, such as room size, wall material,
number of speakers, and so on, can differ so widely, it is inevitable that there are differences in the sound that is heard.
Based on a wealth of actually measured data, Yamaha CINEMA DSP uses Yamaha’s original DSP technology to
combine Dolby Pro Logic, Dolby Digital, and DTS systems to provide the audiovisual experience of a movie theater in
the listening room of your own home.
CINEMA DSP 3D
The actually measured sound field data contain the information of the height of the sound images. CINEMA DSP 3D
feature achieves the reproduction of the accurate height of the sound images so that it creates the accurate and
intensive stereoscopic sound fields in a listening room.
Dolby Digital Plus
Dolby Digital Plus is an advanced audio technology developed for highdefinition programming and BD (Blu-ray disc).
Selected as an optional audio standard for BD, this technology delivers multichannel sound with discrete channel
output. Supporting bitrates up to 6.0 Mbps, Dolby Digital Plus can carry up to 7.1 discreet audio channels
simultaneously. Supported by HDMI version 1.3 and designed for the optical disc players and AV receivers/amplifiers of
the future, Dolby Digital Plus also remains fully compatible with the existing multichannel audio systems that incorporate
Dolby Digital.
Dolby Pro Logic II
Dolby Pro Logic II is an improved technique used to decode vast numbers of existing Dolby Surround sources. This new
technology enables a discrete 5-channel playback with 2 front left and right channels, 1 center channel, and 2 surround
left and right channels, instead of only 1 surround channel for conventional Pro Logic technology. There are three modes
available: “Music mode” for music sources, “Movie mode” for movie sources, and “Game mode” for game sources.
Dolby Pro Logic IIx
Dolby Pro Logic IIx is a new technology enabling discrete multichannel playback from 2-channel or multi-channel
sources. There are three modes available: “Music mode” for music sources, “Movie mode” for movie sources (for 2channel sources only) and “Game mode” for game sources.
Dolby Surround
Dolby Surround uses a 4-channel analog recording system to reproduce realistic and dynamic sound effects: 2 front left
and right channels (stereo), a center channel for dialog (monaural), and a surround channel for special sound effects
(monaural). The surround channel reproduces sound within a narrow frequency range. Dolby Surround is widely used
with nearly all video tapes and laser discs, as well as in many TV and cable broadcasts. The Dolby Pro Logic decoder
built into this unit employs a digital signal processing system that automatically stabilizes the volume on each channel to
enhance moving sound effects and directionality.
Dolby TrueHD
The Compressed Music Enhancer feature of this unit enhances your listening experience by regenerating the missing
harmonics in compression artifacts. As a result, it compensates for flattened complexity due to the loss of highfrequency fidelity as well as lack of bass due to the loss of low-frequency bass, providing improved performance for the
overall sound system.
Dolby TrueHD is an advanced lossless audio technology developed for high-definition disc-based media including Bluray Disc. Selected as an optional audio standard for BD (Blu-ray disc), this technology delivers sound that is bit-for-bit
identical to the studio master, offering a high-definition home theater experience. Supporting bitrates up to 18.0 Mbps,
Dolby TrueHD can carry up to 8 discrete channels of 24-bit/96 kHz audio simultaneously. Dolby TrueHD also remains
fully compatible with the existing multichannel audio systems and retains the metadata capability of Dolby Digital,
allowing dialog normalization and dynamic range control.
Dolby Digital
DTS 96/24
Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front
channels (front L/R and center), and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels.
With an additional channel especially for bass effects, referred to as LFE (Low-Frequency Effect), the system has a total
of 5.1-channels (LFE is counted as 0.1 channel). By using 2-channel stereo for the surround speakers, more accurate
moving sound effects and surround sound environments are possible than with Dolby Surround. The wide dynamic
range from maximum to minimum volumes that are reproduced by the 5 full-range channels, and the precise sound
orientation generated using digital sound processing provides listeners with unprecedented excitement and realism.
With this unit, any sound environment from monaural up to a 5.1-channel configuration can be freely selected for your
enjoyment.
DTS 96/24 offers an unprecedented level of audio quality for multichannel sound on DVD video, and is fully backwardcompatible with all DTS decoders. “96” refers to a 96 kHz sampling rate compared to the typical 48 kHz sampling rate.
“24” refers to 24-bit word length. DTS 96/24 offers sound quality transparent to the original 96/24 master, and 96/24 5.1channel sound with full-quality full-motion video for music programs and motion picture soundtracks on DVD video.
Compressed Music Enhancer
En
119
DTS Digital Surround
MP3
DTS Digital Surround was developed to replace the analog soundtracks of movies with a 5.1-channel digital sound
track, and is now rapidly gaining popularity in movie theaters around the world. DTS, Inc. has developed a home theater
system so that you can enjoy the depth of sound and natural spatial representation of DTS Digital Surround in your
home. This system produces practically distortion-free 5.1-channel sound (technically, left, right and center channels, 2
surround channels, plus an LFE 0.1 channel as a subwoofer, for a total of 5.1-channels). This unit incorporates a DTS-ES
decoder that enables 6.1-channel reproduction by adding the surround back channel to the existing 5.1-channel format.
One of the audio compression methods used by MPEG. It employs the irreversible compression method, which
achieves a high compression rate by thinning out the data of hardly audible part to the human ears. It is said to be
capable of compressing the data quantity by about 1/11 (128 kbps) while maintaining a similar audio quality to music
CD.
DTS Express
This is an audio format for next-generation optical discs such as BD (Blu-ray disc). It uses optimized low bit rate signals
for network streaming. In the case of a BD, this format is used with secondary audio, enabling you to enjoy the
commentary of the movie producer via the Internet while playing the main program.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a high resolution audio technology developed for high-definition disc-based media
including BD (Blu-ray disc). Selected as an optional audio standard for BD, this technology delivers sound that is
virtually indistinguishable from the original, offering a high-definition home theater experience.
Supporting bitrates up to 6.0 Mbps for BD, DTS-HD High Resolution Audio can carry up to 7.1 discrete channels of 24bit/96 kHz audio simultaneously.
DTS-HD High Resolution Audio also remains fully compatible with the existing multichannel audio systems that
incorporate DTS Digital Surround.
MPEG-4 AAC
An MPEG-4 audio standard. As it allows compression of data at a bit rate lower than that of MPEG-2 AAC, it is used
among others for mobile telephones, portable audio players and other low-capacity devices requiring high sound
quality. In addition to the above types of devices, MPEG-4 AAC is also used to distribute contents on the Internet, and
as such is supported by computers, media servers and many other devices.
Neo:6
Neo:6 decodes the conventional 2-channel sources for 6-channel playback by the specific decoder. It enables
playback with the full-range channels with higher separation just like digital discrete signal playback. There are two
modes available: “Music mode” for music sources and “Cinema mode” for movie sources.
PCM (Linear PCM)
Linear PCM is a signal format under which an analog audio signal is digitized, recorded and transmitted without using
any compression. This is used as a method of recording CDs and DVD audio. The PCM system uses a technique for
sampling the size of the analog signal per very small unit of time. Standing for “Pulse Code Modulation,” the analog
signal is encoded as pulses and then modulated for recording.
DTS-HD Master Audio
DTS-HD Master Audio is an advanced lossless audio technology developed for high-definition disc-based media
including BD (Blu-ray disc). Selected as an optional audio standard for BD, this technology delivers sound that is bit-forbit identical to the studio master, offering a high-definition home theater experience.
Supporting bitrates up to 24.5 Mbps for BD, DTS-HD Master Audio can carry up to 7.1 discrete channels of 24-bit/96
kHz audio simultaneously. Supported by HDMI version 1.3 and designed for the optical disc players and AV receivers/
amplifiers of the future, DTS-HD Master Audio also remains fully compatible with the existing multichannel audio
systems that incorporate DTS Digital Surround.
Sampling frequency and number of quantized bits
When digitizing an analog audio signal, the number of times the signal is sampled per second is called the sampling
frequency, while the degree of accuracy when converting the sound level into a numeric value is called the number of
quantized bits. The range of rates that can be played back is determined based on the sampling rate, whereas the
dynamic range representing the sound level difference is determined by the number of quantized bits. In principle, the
higher the sampling frequency, the wider the range of frequencies that can be played back, and the higher the number
of quantized bits, the more accurately the sound level can be reproduced.
DSD
SILENT CINEMA
Direct Stream Digital (DSD) technology stores audio signals on digital storage media, such as Super Audio CDs. Using
DSD, signals are stored as single bit values at a high-frequency sampling rate of 2.8224 MHz, while noise shaping and
oversampling are used to reduce distortion, a common occurrence with very high quantization of audio signals. Due to
the high sampling rate, better audio quality can be achieved than that offered by the PCM format used for normal audio
CDs. The frequency is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This unit can transmit or receive
DSD signals via the HDMI jack.
Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones
have been set for each sound program, so that accurate representations of all the sound programs can be enjoyed on
headphones.
FLAC
This is a file format for lossless audio data compression. FLAC is inferior to lossy compression formats in compression
rate but provides higher audio quality.
LFE 0.1 channel
This channel reproduces low-frequency bass signals, and has a frequency range from 20 Hz to 120 Hz. This channel is
counted as 0.1, because it only enforces a low-frequency range compared to the full-range reproduced by the other 5channels in Dolby Digital or DTS 5.1-channel systems.
Virtual CINEMA DSP
Yamaha has developed a Virtual CINEMA DSP algorithm that allows you to enjoy DSP surround effects even without any
surround speakers, by using virtual surround speakers. It is even possible to enjoy Virtual CINEMA DSP using a minimal
two-speaker system that does not include a center speaker.
WAV
Windows standard audio file format, which defines the method of recording the digital data obtained by converting
audio signals. It does not specify the compression (coding) method so a desired compression method can be used with
it. By default, it is compatible with the PCM method (no compression) and some compression methods including the
ADPCM method.
WMA
An audio compression method developed by Microsoft Corporation. It employs the irreversible compression method,
which achieves a high compression rate by thinning out the data of hardly audible part to the human ears. It is said to be
capable of compressing the data quantity by about 1/22 (64 kbps) while maintaining a similar audio quality to music CD.
En
120
Video information
Component video signal
With the component video signal system, the video signal is separated into the Y signal for luminance and the Pb and Pr
signals for chrominance. Color can be reproduced more faithfully with this system because each of these signals is
independent. The component signal is also called the “color difference signal” because the luminance signal is
subtracted from the color signal. A monitor with component input jacks is required in order to output component signals.
Composite video signal
With the composite video signal system, the video signal comprises the three basic elements of a video picture: color,
brightness and synchronization data. A composite video jack on a video component transmits these three elements
combined.
Deep Color
Deep Color refers to the use of various color depths in displays, up from the 24-bit depths in previous versions of the
HDMI specification. This extra bit depth allows HDTVs and other displays increase from millions of colors to billions of
colors and eliminate on-screen color banding for smooth tonal transitions and subtle gradations between colors. The
increased contrast ratio can represent many times more shades of gray between black and white. Additionally, Deep
Color increases the number of available colors within the boundaries defined by the RGB or YCbCr color space.
HDMI
HDMI (High-Definition Multimedia Interface) is the first industry supported, uncompressed, all-digital audio/video
interface. Providing an interface between any sources (such as set-top boxes or AV receivers) and audio/video monitors
(such as digital televisions), HDMI supports standard, enhanced or high-definition video as well as multichannel digital
audio using a single cable. HDMI transmits all ATSC HDTV standards and supports 8-channel digital audio, with
bandwidth to spare to accommodate future enhancements and requirements.
When used in combination with HDCP (High-bandwidth Digital Content Protection), HDMI provides a secure audio/
video interface that meets the security requirements of content providers and system operators. For further information
on HDMI, visit the HDMI website at “http://www.hdmi.org/.”
S-video signal
With the S-video signal system, the video signal normally transmitted using a pin cable is separated and transmitted as
the Y signal for the luminance and the C signal for the chrominance through the S-video cable. Using the S VIDEO jack
eliminates video signal transmission loss and allows recording and playback of even more beautiful images.
“x.v.Color”
A color space standard supported by HDMI version 1.3. It is a more extensive color space than sRGB, and allows the
expression of colors that were not hitherto possible. While remaining compatible with the color gamut of sRGB
standards, “x.v.Color” expands the color space, and can thus produce more vivid, natural images. It is particularly
effective for still pictures and computer graphics.
En
121
■ Video conversion table
Video signal flow
Video signals input from a video device to this unit are
output to a TV as shown below.
(solid line) is always available.
(dotted line) is
available only when “Analog to Analog Conversion”
(p.95) in the “Setup” menu is set to “On” (default).
• You can select a resolution and an aspect ratio applied to HDMI-output video processing.
• This unit does not convert 480-line and 576-line video signals interchangeably.
HDMI out
Video device
This unit
VIDEO
out
COMPONENT VIDEO out
TV
Resolution
480i/
576i
480p/
576p
720p
1080i
1080p
480i/
576i
480p/
576p
720p
1080i
1080p
480i/
576i
480i/576i
480p/576p
HDMI in
HDMI
HDMI out
HDMI
HDMI in
HDMI
720p
HDMI
1080i
1080p
COMPONENT
VIDEO in
COMPONENT
VIDEO
COMPONENT
VIDEO
480i/576i
COMPONENT
VIDEO out
COMPONENT
VIDEO
COMPONENT
VIDEO
PR
PR
PR
PR
PB
PB
PB
PB
Y
Y
Y
Y
COMPONENT
VIDEO in
S VIDEO
VIDEO in
VIDEO
VIDEO
720p
1080i
S VIDEO
in
S VIDEO
480p/576p
S VIDEO in
480i/576i
VIDEO in
480i/576i
VIDEO out
VIDEO
VIDEO
En
122
To use HDMI Control, you need to perform the following HDMI Control link setup after
connecting the TV and playback devices.
Information on HDMI
HDMI Control
• This setup is required every time when you add a new HDMI Control-compatible device to your system.
HDMI Control allows you to operate external devices via HDMI. If you connect a TV that
supports HDMI Control to this unit with an HDMI cable, you can control this unit (power,
volume, etc.) in conjunction with TV remote control operations. You can also control
playback devices (HDMI Control-compatible BD/DVD players, etc.) connected to this
unit with an HDMI cable.
For details on connections, see “Connecting a TV” (p.21) and “Connecting video
devices (BD/DVD players, etc.)” (p.26).
Operations available from the TV’s remote control
- Standby synchronization
- Volume control including mute
- Switching to input audio from the TV when the TV input is switched to its built-in tuner
- Switching to input video/audio from the selected playback device
- Switching between audio output devices (this unit or TV speaker)
(Example)
HDMI Control
HDMI Control
This unit turns off
(standby)
Playback device
also turns off
Turn off the TV
Operations available from this unit’s remote control
- Starting playback on the playback device and turning on the TV in conjunction with a
scene selection (p.44)
- Switching the TV input to display the on-screen menu (when ON SCREEN is pressed)
- Controlling the playback device (playback and menu operations) without registering
remote control codes (p.106)
• To use HDMI Control, connect the TV to the HDMI OUT 1 jack.
1 Turn on this unit, TV and playback devices.
HDMI Control on this unit, TV and playback devices (HDMI
2 Enable
Control-compatible BD/DVD players, etc).
To enable HDMI Control on this unit, set “HDMI Control” (p.96) in the “Setup”
menu to “On” and configure the related items (“TV Audio Input”, “ARC” and
“Standby Sync”).
off the main power of the TV and then turn off this unit and
3 Turn
playback devices.
on the main power of the TV and then turn on this unit and
4 Turn
playback devices.
5 Switch the TV input to display the video from this unit.
6 Check the followings.
On this unit: The input to which the playback device is connected is selected. If
not, select the input source manually.
On the TV: The video from the playback device is displayed.
that this unit is properly synchronized with the TV by turning
7 Check
off the TV or adjusting the TV volume with the TV remote control.
• If HDMI Control does not work properly, try unplugging the TV in step 2 and re-plugging the TV in step 3. It
may solve the problem. Also, HDMI Control may not work if the number of connected devices is over the
limit. In this case, disable HDMI Control on the devices not in use.
• If the unit is not synchronized to the TV's power operations, check the priority of the audio output setting on
the TV.
(Example)
HDMI Control
HDMI Control
• We recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.
Turns on and displays video
from the playback device
Playback starts
Press SCENE
(BD/DVD)
En
123
HDMI signal compatibility
Audio signals
Audio signal type
Audio signal format
Compatible media (example)
2ch Linear PCM
2ch, 32 to 192 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio
Multi-channel Linear PCM
8ch, 32 to 192 kHz, 16/20/24 bit
DVD-Audio, BD (Blu-ray disc),
HD DVD
DSD
2/5.1ch, 2.8224 MHz, 1 bit
SACD
Bitstream
Dolby Digital, DTS
DVD-Video
Bitstream
(High definition audio)
Dolby TrueHD, Dolby Digital
Plus, DTS-HD Master Audio,
DTS-HD High Resolution Audio,
DTS Express
BD (Blu-ray disc), HD DVD
Video signals
This unit is compatible with the video signals of the following resolutions:
- 480i/60 Hz
- 720p/60 Hz, 50 Hz
- 576i/50 Hz
- 1080i/60 Hz, 50 Hz
- 480p/60 Hz
- 1080p/60 Hz, 50 Hz, 24 Hz
- 576p/50 Hz
• When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending
on the type of the DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the
instruction manual of each device.
• To decode audio bitstream signals on this unit, set the input source device appropriately so that the device
outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).
For details, refer to the instruction manual of the playback device.
• This unit is not compatible with the audio commentary features (for example, the special audio contents
downloaded via Internet) of BD or HD DVD. This unit does not playback the audio commentaries of the BD
or HD DVD content.
En
124
Reference diagram (rear panel)
RS-232C
DOCK
NETWORK
HDMI 1
HDMI OUT
2
1
ARC
PHONO
COMPONENT
VIDEO
AM
HDMI 3
HDMI 4
HDMI 5
HDMI 6
HDMI 7
SPEAKERS
ANTENNA
L
HDMI 2
(BD/DVD)
R
COMPONENT
VIDEO
FM
FRONT
L
R SURROUND L
CENTER
R SURROUND BACK/
BI–AMP L
R ZONE 2/PRESENCE
L
REMOTE
PR
IN
PR
R
GND
SINGLE
S VIDEO
OUT
75Ω
PB
PB
VIDEO
VIDEO
Y
Y
MONITOR OUT
+12V
0.1A MAX.
TRIGGER OUT
EXTRA SP
SINGLE
L
CENTER
AC IN
L
R
R
OPTICAL
COAXIAL
COAXIAL
OPTICAL
(CD)
(TV)
AV 1
AV 2
AV 3
AV 4
AV 5
AV 6
AV
OUT
AUDIO 1
AUDIO 2
AUDIO
OUT
ZONE 2
OUT
FRONT
SURROUND
SUR. BACK
1 SUBWOOFER 2
PRE OUT
• The area around the video/audio output jacks is marked in white on the actual product.
En
125
Trademarks
“SILENT CINEMA” is a trademark of Yamaha Corporation.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of
Dolby Laboratories.
DLNA Certified is a trademark of the Digital Living Network Alliance in the United States and other countries.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other
U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD
Master Audio, and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
iPod™, iPhone™
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to
iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please
note that the use of this accessory with iPod or iPhone may affect wireless performance.
Windows XP, Windows Vista, Windows 7, Windows Media Audio, Windows Media Connect and Windows Media Player
are either registered trademarks or trademarks of Microsoft corporation in the United States and/or other countries.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other
countries.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
This receiver supports network connections.
Bluetooth™
Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license
agreement.
“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are trademarks, or registered trademarks of HDMI
Licensing LLC.
x.v.Color™
“x.v.Color” is a trademark of Sony Corporation.
En
126
Specifications
Input jacks
• Analog Audio
[U.S.A. and Canada models]
Audio x 5 (AV5~6, AUDIO1~2, V-AUX)
[Other models]
Audio x 6 (AV5~6, AUDIO1~2, PHONO, V-AUX)
• Digital Audio (Support fs: 32 kHz to 96 kHz)
Optical x 2 (AV1, AV4)
Coaxial x 2 (AV2, AV3)
• Video
• Video
MONITOR OUT
- Component x 1
- Composite x 1
AV OUT
- Composite x 1
• HDMI Output
HDMI OUT x 2 (HDMI OUT1~2)
Remote jacks
• REMOTE IN x 1
Composite x 5 (AV3~6, V-AUX)
• REMOTE OUT x 1
S-Video x 1 (AV5) [U.K. and Europe models]
Component x 2 (AV1~2)
• HDMI Input
HDMI (Front Panel) x 1 (V-AUX)
HDMI (Rear Panel) x 7 (HDMI1~7)
• Other
TUNER
• Analog Tuner
[U.K. and Europe models]
FM/AM with RDS x 1 (TUNER)
[Other models]
FM/AM x 1 (TUNER)
• Satellite Radio Ready [U.S.A. model]
SIRIUS Radio x 1 (SIRIUS)
USB
• Capable of iPod, Mass Storage Class USB Memory, MTP
(Media Transfer Protocol)
• TRIGGER OUT x 1
• Current Supply Capacity: 1 A
HDMI
Network
• HDMI Specification: Deep Color, “x.v.Color,” Auto Lip Sync,
• PC Client Function
HDMI Control (CEC), ARC (Audio Return Channel), 3D
• Video Format (Repeater Mode)
• Compatible with Windows 7, DLNA ver. 1.5
• Internet Radio
DOCK x 1 (Audio, Composite Video)
- VGA
USB x 1 (USB2.0)
- 480i/60 Hz
Compatible Decoding Formats
NETWORK x 1 (100Base-TX)
- 576i/50 Hz
• Decoding Format
Output jacks
• Analog Audio
Speaker out x 9 (7 ch) (FRONT L/R, CENTER,
SURROUND L/R, SURROUND BACK L/R*1, EXTRA SP L/R*2)
- 480p/60 Hz
- Dolby TrueHD, Dolby Digital Plus
- 576p/50 Hz
- DTS-HD Master Audio, DTS-HD High Resolution,
- 720p/60 Hz, 50 Hz
- 1080i/60 Hz, 50 Hz
- 1080p/60 Hz, 50 Hz, 24 Hz
*1 Note: assignment is possible. [SURROUND BACK, BI-AMP
(FRONT L/R)]
*2 Note: assignment is possible. [ZONE2, PRESENCE]
Pre Out x 7 (FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R)
Subwoofer Out x 2 (SUBWOOFER 1~2, mono)
AV OUT x 1
AUDIO OUT x 1
ZONE2 OUT x 1
• Audio Format
DTS Express
- Dolby Digital, Dolby Digital EX
- DTS, DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
• Post Decoding Format
- Dolby Digital
- Dolby Pro Logic
- DTS
- Dolby Pro Logic II Music, Dolby Pro Logic II Movie,
- DSD 6ch
- Dolby Digital Plus
- Dolby TrueHD
- DTS-HD
Dolby Pro Logic II Game
- Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Movie,
Dolby Pro Logic IIx Game
- DTS Neo:6 Music, DTS Neo:6 Cinema
- PCM 2ch-8ch (Max 192 kHz/24 bit)
• Content Protection: HDCP compatible
En
127
Audio Section
• Rated Output Power
(20 Hz to 20 kHz, 0.09% THD, 8Ω)
• Frequency Response
AV5 etc. to Front (10 kHz to 100 kHz) .........................+0/-3 dB
• RIAA Equalization Deviation
Treble Boost/Cut.......................... ±6 dB/0.5 dB Step at 20 kHz
Treble Turnover ............................................................. 3.5 kHz
• Filter Characteristics
Front L/R .............................................................100 W+100 W
[China, Korea, Australia, U.K. and Europe, Asia and General
(fc=40/60/80/90/100/110/120/160/200 Hz)
(1 kHz, 0.9% THD, 8Ω)
models]
H.P.F. (Front, Center, Surround, Surround Back).......12 dB/oct.
Front L/R .......................................... 130 W/ch (110 W+110 W)
PHONO ...................................................................... 0±0.5 dB
L.P.F. (Subwoofer) .....................................................24 dB/oct.
Center ...........................................................130 W/ch (110 W)
• Total Harmonic Distortion
Surround L/R.................................... 130 W/ch (110 W+110 W)
[U.S.A. and Canada models]
Surround Back L/R .......................... 130 W/ch (110 W+110 W)
AV5 etc. to Front (Pure Direct)
• Maximum Effective Output Power (JEITA, 1 kHz, 10% THD, 8 Ω)
(20 to 20 kHz, 50 W/8 Ω)..................................... 0.06% or less
Video Section
• Video Signal Type
[U.S.A., Canada, Korea and General models] ................NTSC
[Other models] ....................................................................PAL
[China, Asia and General models]
[Other models]
Front L/R .................................................................... 160 W/ch
PHONO to REC OUT (20 to 20 kHz, 1 V) ............ 0.02% or less
• Video Signal Type (Video Conversion)..................... NTSC/PAL
Center ........................................................................ 160 W/ch
AV5 etc. to Front (Pure Direct)
• Video Signal Level
Surround L/R.............................................................. 160 W/ch
(20 to 20 kHz, 50 W/8 Ω)..................................... 0.06% or less
Surround Back L/R .................................................... 160 W/ch
• Dynamic Power (IHF)
Front L/R (8/6/4/2 Ω) .................................. 140/180/210/250 W
• Damping Factor
Front L/R, 20 Hz to 20 kHz, 8 Ω............................. 100 or more
• Signal to Noise Ratio (IHF-A Network)
[U.S.A. and Canada models]
AV5 etc.
(Pure Direct, Input Shorted 250 mV, SP OUT) ..... 100 dB or more
[Other models]
PHONO (Input Shorted 5 mV, REC OUT)........... 81 dB or more
• Input Sensitivity / Input Impedance
[U.S.A. and Canada models]
AV5 etc. (1 kHz, 100 W/8 Ω)...............................200 mV/47 kΩ
[Other models]
PHONO (1 kHz, 100 W/8 Ω) ................................3.5 mV/47 kΩ
AV5 etc. (1 kHz, 100 W/8 Ω)...............................200 mV/47 kΩ
• Maximum Input Signal
[U.S.A. and Canada models]
AV5 etc. (1 kHz, 0.5% THD, Effect On) ............................ 2.3 V
[Other models]
PHONO (1 kHz, 0.1% THD)............................................ 60 mV
AV5 etc. (1 kHz, 0.5% THD, Effect On) ............................ 2.3 V
AV5 etc.
(Pure Direct, Input Shorted 250 mV, SP OUT) ..... 100 dB or more
• Residual Noise (IHF-A Network)
Front L/R (SP OUT)............................................. 150 µV or less
Composite..............................................................1 Vp-p/75 Ω
S-Video [U.K. and Europe models]
Y ..........................................................................1 Vp-p/75 Ω
C...................................................................0.286 Vp-p/75 Ω
Component
Y ..........................................................................1 Vp-p/75 Ω
• Video Maximum Input Level (Video Conversion Off)
....................................................................... 1.5 Vp-p or more
• Video Signal to Noise Ratio................................ 50 dB or more
• Monitor Out Frequency Response (Video Conversion Off)
Component ............................................5 Hz to 60 MHz, -3 dB
• Channel Separation
[U.S.A. and Canada models]
AV5 etc.
(Input 5.1 kΩ Shorted, 1 kHz/10 kHz) ..... 60 dB/45 dB or more
[Other models]
PHONO (Input Shorted, 1 kHz/10 kHz)... 60 dB/55 dB or more
AV5 etc.
(Input 5.1 kΩ Shorted, 1 kHz/10 kHz) ..... 60 dB/45 dB or more
• Output Level / Output Impedance
REC OUT ...........................................................200 mV/1.2 kΩ
SUBWOOFER (2ch Stereo, Front: Small) .................1 V/1.2 kΩ
ZONE2 OUT.......................................................200 mV/1.2 kΩ
• Headphone Jack Rated Output / Impedance
AV5 etc. (1 kHz, 50 mV, 8 Ω) ..............................100 mV/560 Ω
• Volume Control
Range............................................. MUTE, -80 dB to +16.5 dB
Step ................................................................................ 0.5 dB
• Tone Control Characteristics (Front L/R)
Bass Boost/Cut............................. ±6 dB/0.5 dB Step at 50 Hz
Bass Turnover ............................................................... 350 Hz
En
128
FM Section
• Tuning Range
[U.S.A. and Canada models] ..............87.5 MHz to 107.9 MHz
[Asia and General models]
.......................................87.5/87.50 MHz to 108.0/108.00 MHz
[Other models].................................87.50 MHz to 108.00 MHz
Network Standby On (Typical) .........................................2.0 W
• Maximum Power Consumption
[Asia and General models] .............................................590 W
• Dimensions (W x H x D) ........................... 435 x 171 x 369 mm
(17-1/8” x 6-3/4” x 14-1/2”)
• Weight ...........................................................11.1 kg (24.5 lbs)
• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
Mono................................................................. 3 µV (20.8 dBf)
• Signal to Noise Ratio (IHF)
* Specifications are subject to change without notice.
Mono................................................................................ 71 dB
Stereo .............................................................................. 69 dB
• Harmonic Distortion (IHF, 1 kHz)
Mono................................................................................. 0.3%
Stereo ............................................................................... 0.5%
• Antenna Input ................................................75 Ω unbalanced
AM section
• Tuning Range
[U.S.A. and Canada models] .................. 530 kHz to 1710 kHz
[Asia and General models]...... 530/531 kHz to 1710/1611 kHz
[Other models]......................................... 531 kHz to 1611 kHz
General
• Power Supply
[U.S.A. and Canada models] ........................ AC 120 V, 60 Hz
[General model].................... AC 110-120/220-240 V, 50/60 Hz
[China model] ................................................. AC 220 V, 50 Hz
[Korea model]................................................. AC 220 V, 60 Hz
[Australia model] ............................................ AC 240 V, 50 Hz
[U.K. and Europe models].............................. AC 230 V, 50 Hz
[Asia model] ....................................... AC 220-240 V, 50/60 Hz
• Power Consumption
[U.S.A. and Canada models] ............................. 400 W/500 VA
[Asia and General models]............................................. 300 W
[Other models]................................................................ 330 W
• Standby Power Consumption
HDMI Control Off / Standby Through Off..............0.1 W or less
HDMI Control On/Standby Through On (Typical) ............ 2.0 W
En
129
© 2011 Yamaha Corporation
YD455C0/OMEN3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement