Atmel AVR Xplained Evaluate the AVR
Atmel AVR Xplained Evaluate the AVR Atmel® Xplained MCU kits provide great platforms for early evaluation of the Atmel AVR. The kits contain a high-performance AVR microcontroller, QTouch® slider and button sensors, LEDs and a USB port. The boards are powered by the USB cable, and the USB port is also used to download new firmware to the AVR device. The boards are also equipped with the standard 10-pin JTAG header that connects to the full range of Atmel AVR debuggers. The Xplained MCU boards are excellent for evaluating Atmel Studio with the Atmel Software Framework. The Atmel Software Framework works with both Atmel Studio and IAR Embedded Workbench. Customers can take advantage of a large library of drivers, services and applications available at www.atmel.com/xplained. Key Features XMEGA-A1 Xplained XMEGA-A3BU Xplained XMEGA-B1 Xplained MEGA-1284P Xplained UC3-L0 Xplained UC3-A3 Xplained Ordering Code: Ordering Code: Ordering Code: Ordering Code: Ordering Code: Ordering Code: ATAVRXPLAIN ATXMEGAA3BU-XPLD ATXMEGAB1-XPLD ATMEGA1284P-XPLD AT32UC3L0-XPLD AT32UC3A3-XPLD Features: • Atmel picoPower® Features: • Atmel picoPower® Features: • Atmel picoPower® Features: • Atmel picoPower® Features: • Atmel picoPower® 8-bit AVR XMEGA •ATxmega256A1 • 8 mechanical buttons & 8 LEDs • 8 MB SDRAM • Speaker • Temperature & light sensors 8-bit AVR XMEGA •ATxmega256A3BU •128x32 pixel FSTN LCD Display • QTouch button • 3 mechanical buttons & 2 LEDs • 64 MB Dataflash • Temperature & light sensors 8-bit AVR XMEGA •ATxmega128B1 • Segment LCD Display • USB connectivity • QTouch button • 3 mechanical buttons & 2 LEDs • Temperature & light sensors 8-bit AVR XMEGA •ATmega1284P • QTouch button • Temperature & light sensors • 4 LEDs 32-bit AVR UC3 •AT32UC3L064 • QTouch button & slider • Temperature sensor •1 mechanical button & 3 LEDs Features: • Atmel 32-bit AVR UC3 •AT32UC3A3256 • HiSpeed USB Device • QTouch button & slider • 8 MB SDRAM •1 Mechanical button & 4 LEDs • Temperature sensor Atmel AVR Xplained Evaluate the AVR Xplained Top Modules All Xplained MCU boards contain four expansion headers that provide easy access to analog and digital I/O pins. These expansion headers are compatible across all MCU boards so top-modules can be stacked on MCU boards for added functionality. Inertial Sensor 1 Inertial Sensor 2 Pressure Sensor 1 Light and Proximity 1 Security Xplained Temperature Xplained Ordering Code: Ordering Code: Ordering code: Ordering code: ATAVRSBIN2 ATAVRSBPR1 Ordering code: ATAVRSBLP1 Ordering code: ATAVRSBIN1 ATAVRSECURITYX ATAVRTEMPSENSORX Featuring: • Atmel AVR ATSHA204 •SHA-256 • Client/host authentication with EEPROM Featuring: • AT30TS750 (-40°C to +125°C) •Temperature sensor • AT30TSE002B (-20°C to +125°C) •Temperature sensor & Serial EEPROM Featuring: • Bosch Accelerometer (BMA150) • Invensense Gyroscope (ITG-3200) • AKM Compass (AK8975) Featuring: • Honeywell Magnetometer (HMC5883L) • Kionix Accelerometer (KXTF9) • InvenSense Gyroscope (IMU-3000) Featuring: • Bosch barometric pressure sensor (BMP085) Featuring: • Osram Opto Semiconductors ALS sensor (SFH7770) • Osram IR emitters (SFH4059) For more information, visit http://www.atmel.com/Xplained Atmel Corporation 1600 Technology Drive, San Jose, CA 95110 USA T: (+1)(408) 441-0311 F: (+1)(408) 487-2600 | www.atmel.com © 2012 Atmel Corporation. All rights reserved. Rev.: 8747D-AVR Xplained Evaluated_E_US_09/12 Atmel®, Atmel logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project