Rio | Intense Pulsed Light Hair Remover | User guide | Rio Intense Pulsed Light Hair Remover User guide

INTENSE PULSED LIGHT
© The Dezac Group
user guide
HAIR REMOVER
© The Dezac Group
This product MUST
be used responsibly
Read all instructions
thoroughly before
use and retain for
future reference
© The Dezac Group
WA R N I NG S
•Read all instructions thoroughly
and retain for future reference.
•This appliance can be used by children
aged 8 years and above and persons
with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning the use of the appliance
in a safe way and understand the
hazards involved. Children shall not
play with the appliance. Cleaning and
maintenance shall not be made by
children without supervision.
•Never aimGroup
the wand at or near eyes.
© The Dezac
•Reflection Hazard: Please remove
all jewellery in the vicinity of the
treatment area before use.
•Do NOT use near flammable materials.
•Do NOT use this appliance in wet
surroundings (near a bath or shower).
• Do NOT use if water enters the unit.
•Do NOT immerse in water.
© The Dezac Group
1
INTENSE PULSED LIGHT HAIR REMOVER ™
1-IN-IPHR-UK/4.1
© The Dezac Group
WA R NI NG S
Areas not to treat:
Unsuitable skin tones and hair
types:
•IPL is not suitable for dark skin tones, •Do NOT treat over tattoos, permanent
for example, those of Afro-Caribbean, make-up, pimples, acne, warts,
Black African, Indian or Pakistani hair on black spots or moles, dark
descent. See “Suitable Skin Types” freckles, skin disease, birth marks,
burns, nipples, genital or anal areas,
and always carry out Patch Test.
•IPL is not suitable for the removal of varicose veins, eczema, cold sores,
psoriasis, open wounds, on abnormal
red, light blonde, grey or white hair.
skin pigmentation such as albinism
and vitiligo or on broken skin.
© The Dezac Group
© The Dezac Group
© The Dezac Group
INTENSE PULSED LIGHT HAIR REMOVER ™
2
WA R NI NG S
Do not use if:
•You are pregnant or breast feeding,
you have a history of epilepsy or
are taking medication known to
increase photosensitivity. If you
have any history of epileptic seizures
we do NOT recommend using IPL.
Common medications can cause
photosensitivity so if you are on
any medication you should check
for photosensitivity warnings and
if in any doubt consult your doctor.
Common medications which can
cause photosensitivity include some
diuretics,Group
some antibiotics, tricyclic
© The Dezac
antidepressants and medications
prescribed for thyroid conditions,
lupus and arthritis.
•Do NOT use if you have a history of
skin cancer.
•Do NOT use if you have diabetes,
kidney disease, heart disease or
thyroid problems.
•Do NOT treat the same area repeatedly
in any one session.
© The Dezac Group
© The Dezac Group
3
INTENSE PULSED LIGHT HAIR REMOVER ™
WA R NI NG S
Possible reactions:
•Most people feel a heating sensation
during treatment. Some people
experience a slight reddening of the
skin. In most cases this will disappear
within 24 hours, but on rare occasions
it may take up to 72 hours.
•Pain in the
area treated
© The Dezac
Group
•Itching in the area treated
•Redness
© The Dezac Group
If the following occurs, seek medical
advice immediately.
•The following effects will require
discontinuing treatment. In •Blistering or burning
each case, cool the area - we
recommend an aloe vera cooling gel.
If symptoms continue after 48 hours,
seek medical advice.
© The Dezac Group
INTENSE PULSED LIGHT HAIR REMOVER ™
4
© The Dezac Group
IN T R O DU CT I ON
The Intense Pulsed Light Hair Remover™ uses the latest Intense Pulsed Light (IPL) technology.
Placed gently against the skin, pulses of intense light are delivered directly to the hair follicle
with enough energy to disable the root without affecting the surrounding area. IPL delivers
quick and efficient long term hair removal. IPL is suitable for larger areas such as legs, arms,
underarms, bikini line, back and chest as well as certain areas of the face.
© The Dezac Group
© The Dezac Group
5
INTENSE PULSED LIGHT HAIR REMOVER ™
1Keyswitch
1
6
© The Dezac Group
2
Power level decrease button (-)
3
Power level increase button (+)
4
Power level indicators
5
Bulb life indicator
6
Enable button
7
Mains power socket (on the back)
8
Wand cable
9Wand
7
9
2
© The Dezac Group
3
4
5
© The Dezac Group
INTENSE PULSED LIGHT HAIR REMOVER ™
6
8
0
IPL treatment button
!
Blue ‘ready’ light (x2)
@
Treatment cartridge
£
Indentation mark
$
Orange ‘safety’ light (x2)
%
Orange IPL aperture
^
Skin sensors (x4)
© The Dezac Group
&Bulb
*Razor
(
0
*
!
@
(
© The Dezac Group
Mains power lead
£
$
)Keys
&
%
)
© The Dezac Group
^
7
INTENSE PULSED LIGHT HAIR REMOVER ™
S uitable skin t y pes
Your IPL hair remover is suitable for fair coloured skin through to olive and tanned skin types. For treatment to be effective
the hair needs to be darker than the surrounding skin. Best results are on pale skin with dark hair.
© The Dezac Group
You may find that different power levels are required on different areas. Each area should be tested for the appropriate
maximum power level.
Use the skin tone chart together with the chart (page 10) to accurately identify your skin tone/type.
skin tone chart
© The Dezac Group
© The Dezac Group
Suitable for
IPL treatment
INTENSE PULSED LIGHT HAIR REMOVER ™
NOT Suitable
for IPL treatment
8
T R E A T M E N T summar y
Read all
warnings
before you
begin
© The Dezac Group
Establish
skin tone
using the
chart
Carry out
a patch test
Wait
24 hours
Did your
skin react
to the
patch test?
NO
TREATMENT
YES
NO
Did your
skin react
to the
treatment?
YES
© The Dezac Group
See
‘possible
reactions’
under
‘warnings’
See
‘possible
reactions’
under
‘warnings’
Do NOT
use the IPL
unit unless
the problem
is resolved
© The Dezac Group
9
INTENSE PULSED LIGHT HAIR REMOVER ™
1
PA T C H T E ST
2
S KI N C HAR T
24 hours before treatment check for any reaction by testing a
small area.
© The Dezac Group
The patch test will confirm the maximum power level for your
skin type.
Treat an area on each power level (e.g. arm, leg) up to the
maximum power level for your skin type (see Skin Chart). Use
the (+) button to increase the power level by a single step
each time and work your way along the area with the wand on
a different part of the skin each time.
Skin
Type
Skin Colour
Tanning
History
I
Very fair,
“transparent”
Always burns,
never tans
Fair
Always burns
II
Maximum
Power Level
1
2
Fair to light
olive
Burns mildly
IV
Olive/Tanned
Rarely burns,
tans with ease
V
Dark brown
Very rarely burns
III
A slight redness may occur, but not always, within an hour
of treatment. However, if any redness remains after 24 hours
this would indicate the power level selected was too high for
your skin type.
IMPORTANT: Because skin colour varies on different areas
of the body, you may find that you need different power level
settings for different areas. Each area should be tested for the
appropriate maximum power level.
1
2
Black
Never burns
5
3
NOT suitable
for IPL treatment
1
10
4
Subject to patch test
power levels 1, 2
and 3 can be used
© The Dezac Group
VI
3
Subject to patch test
all 5 power levels
can be used
© The Dezac Group
If you feel any discomfort the previous power level is the
maximum power level you should use.
INTENSE PULSED LIGHT HAIR REMOVER ™
3
2
3
4
5
B E F O R E Y OU S T AR T
Please ensure you read and understand the ‘Warnings’ section before proceeding.
© The Dezac Group
• Do not use any hair removal method that plucks the hair from the follicle, as this renders IPL ineffective.
• Remove all jewellery in the vicinity of the treatment area.
• Ensure you have patch tested the area to be treated 24 hours prior to treatment and are aware of your maximum
power level.
• Your first treatment will always be on power level 1 and can only be increased by one level after a treatment is
performed.
© The Dezac Group
INCREASING THE POWER LEVEL
Each time you use your IPL you will need to do a treatment flash on each power level before you can increase the
power to the next level. This is a safety feature to ensure you are aware of the treatment intensity at each level.
A self-check lasting a few seconds is performed whenever the power level is increased. During this time, the power
levels will illuminate up and down. These self-checks may occur at other times and are important to optimise the
performance of the unit.
© The Dezac Group
11
INTENSE PULSED LIGHT HAIR REMOVER ™
IN S T R UC T IO NS for use
1
STEP 1
Shave the area to be treated. This
ensures that the light energy goes
directly to the hair root and avoids hair
burning on the surface.
3
STEP 3
Turn the key clockwise to the ON
position to unlock. The light around the
keyswitch will flash green. Power level
1 will illuminate and the fan will startup.
© The Dezac Group
© The Dezac Group
IMPORTANT
Place on a hard surface and ensure cooling vents on the
underside are not obstructed e.g. duvet or soft carpet.
2
STEP 2
Connect mains power lead into the
power socket on the back of the unit
and plug into the mains.

© The Dezac Group
INTENSE PULSED LIGHT HAIR REMOVER ™
12

IN S T R UC T IO NS for use
STEP 4
© The Dezac Group
Enter the security code by pressing the buttons (highlighted in black) in the following order:
4
© The Dezac Group
The unit will emit 2 beeps and the keyswitch will stop flashing and illuminate green. A series of self-checks
will be performed. During this time, the power levels will illuminate up and down. When completed, the
lowest power level will illuminate and the enable button will flash blue ready for selection.
© The Dezac Group
Note: The unit will power off if the code is incorrectly entered (the keyswitch will change from flashing green to flashing
orange and the unit will emit two low beeps). Turn the key off, wait a few seconds and then turn the key back on and enter
the correct security code.
13
INTENSE PULSED LIGHT HAIR REMOVER ™
IN S T R UC T IO NS for use
5
STEP 5
Press the enable button once.
The enable button will stop flashing.
The orange lights on the wand will
illuminate.
7
STEP 7
Press and HOLD the treatment button
on the wand. This initiates the treatment
flash. You may feel a slight warming of
the area.
© The Dezac Group
Note: Each time the power setting is
adjusted, you will need to press the
enable button to continue.
Notes:
• Do NOT move the wand during treatment.
• The wand may become warm during
use which is quite normal.
6
© The Dezac Group
• If contact is lost between the skin
sensors and skin during treatment,
the wand’s blue lights will go off.
Return to step 6.
STEP 6
Place the wand over the area you wish
to treat. Ensure all 4 skin sensors are in
contact with the skin (you may need to
apply gentle pressure). The blue ‘ready’
lights will illuminate.
© The Dezac Group
INTENSE PULSED LIGHT HAIR REMOVER ™
14
IN S T R UC T IO NS for use
8
STEP 8
The blue lights will go out after the
treatment flash. The unit will also selfcheck after each flash. This takes five
seconds, during this time the power
level lights will illuminate up and down.
© The Dezac Group
INCREASING THE POWER LEVEL
Each time you use your IPL you will need to do a
treatment flash on each power level before you can
increase the power to the next level. This is a safety
feature to ensure you are aware of the treatment
intensity at each level.
When moving the wand to the next
area, the skin sensors must be lifted off
the skin.
A self-check lasting a few seconds is performed
whenever the power level is increased. During this
time, the power levels will illuminate up and down.
© The Dezac Group
AFTER USE
Turn the key anticlockwise to the OFF
position to lock. Remove and store the
key in a safe place away from children.
If you are increasing power for the next
treatment, press the (+) button and
return to step 5.
Important: Do NOT exceed the
maximum power level for your skin type.
© The Dezac Group
15
INTENSE PULSED LIGHT HAIR REMOVER ™
‘ mute ’ option
E rror codes
1
1
2
2
3
3
To turn off the audio indications (beeps),
press down the enable button while turning
on the unit with the key.
© The Dezac Group
Indication
4
4
5
5
1
1
2
2
3
3
4
4
5
5
1
1
2
2
3
3
4
4
5
5
Problem / Solution
Overheat protection
Note: This doesn’t turn off warning beeps.
Unit should be left on
(cooling fans will run).
Leave wand on a hard surface
(NOT on its side or
on the console).
Turn the key off and back on to turn audio
indications back on.
WAND FAN ERROR
© The Dezac Group
1
1
2
2
3
3
4
4
5
5
1
2
3
4
5
1
2
3
4
5
1
2
3
4
Turn off using keyswitch,
wait 5 seconds and
turn on again.
WAND CAB L E S T OR AG E
Wrap the wand cable around
the cable storage feature on
the underside of the unit and
place the wand back in the
wand recess.
ENERGY SAVING MODE
All lights are off
Turn off using keyswitch,
wait 5 seconds and
turn on again.
© The Dezac Group
5
If any of the above problems persist or the power
level lights continue to flash, please contact our
Customer Care Department or check the website:
www.rio-ipl.com for more information.
INTENSE PULSED LIGHT HAIR REMOVER ™
16
F A C I A L treatment
treatment area
The Intense Pulsed Light Hair Remover can be safely used on
the face within the area illustrated by the white dotted line.
As a guide to the treatment area, a small indentation mark
will be left by pressing the wand down on the skin. When
moving the wand use these marks, building up a grid-like
pattern to ensure complete coverage.
© The Dezac Group
Important: It should not be used around the eyes or on the lips.
A white eyeliner pencil may also help by outlining areas to
be treated.
Important: Do NOT use a dark eyeliner or felt pen to mark
an area as this will react with the treatment flash and cause
damage to the skin.
© The Dezac Group
1
2
3
4
5
6
7
© The Dezac Group
8
Indentation marks building up a grid-like pattern
17
INTENSE PULSED LIGHT HAIR REMOVER ™
C H AN G IN G T H E T R E AT ME NT CAR T R I D G E
The IPL hair remover incorporates a treatment cartridge
containing a high performance quartz bulb. Depending on
a number of factors (including room temperature, output
level selected, speed of repeat flashes) the cartridge can
give 40,000+ treatment flashes. The performance of the
bulb is checked after each treatment.
1
STEP 1
Turn the unit off and back on, and enter
security code.
© The Dezac Group
© The Dezac Group
When there are 300 treatments
remaining, the bulb life indicator
flashes yellow.
2
When the yellow light changes to
flashing red, the bulb must be changed.
STEP 2
Press and hold the (-) and (+) buttons
together while the unit is self-checking.
Power levels 1 and 5 will illuminate.
© The Dezac Group
INTENSE PULSED LIGHT HAIR REMOVER ™
18
C H AN G IN G T H E T R E AT ME NT CAR T R I D G E
3
STEP 3
Pull the treatment cartridge (which
contains the bulb) away from the wand.
5
STEP 5
Press and hold the (-) and (+) buttons
together. The bulb indicator light and
power level 5 light will go out.
© The Dezac Group
The unit will automatically power off.
The enable button will flash blue
indicating the unit is ready for further
treatments.
4
© The Dezac Group
Note: The unit will not power on if the
bulb is fitted incorrectly or is missing.
STEP 4
Ensure the connecting pins line up with
the holes in the wand and push the new
treatment cartridge fully into place.
Further treatment cartridges can be
ordered using the accessory form or by
calling the Rio careline.
The unit will automatically power on.
Power levels 1 and 5 will illuminate
again.
© The Dezac Group
19
INTENSE PULSED LIGHT HAIR REMOVER ™
the hair growth c y cle
© The Dezac Group
© The Dezac Group
© The Dezac Group
INTENSE PULSED LIGHT HAIR REMOVER ™
20
H O W M A N Y T R E A T M E NT S AR E R E QU I R ED ?
Everyone’s hair grows differently, depending on age, weight,
metabolism, hormones, ethnicity, medications and other
factors. However, all hair goes through three distinct growth
phases:
© The Dezac Group
Follicle
Density
per square cm
Resting
Phase
Time in
Resting
Phase
Active
Growth
Face
500
68%
10 weeks
30%
Arms
80
18%
5 months
79%
Legs
60
18%
6 months
79%
Armpit
65
28%
3 months
69%
Chest/Back
70
28%
3 months
69%
Pubic
70
25%
3 months
71%
Body Site
Active Growth phase (called the anagen phase),
Degradation phase (catagen phase), during which the hair
stops growing but is not yet shed, and the Resting phase
(telogen phase), when a hair falls out and a new hair begins
to form.
© The Dezac Group
IPL treatment is effective when the hair is in the active growth
phase. At any one time there is only a percentage of hairs in the
Active Growth phase (the actual percentage varies from one
body area to another). Some follicles are destroyed, others may
be reduced to producing only vellus hairs (light fine hairs) and
some are disabled helping prevent hair regrowth.
To catch all hairs in the Active growth phase several treatments
are required over many months (a minimum of six over six
months). Thereafter a quick treatment every 4 to 6 weeks is
undertaken to ensure disabled hairs remain dormant and to
maintain permanently hair free skin.
© The Dezac Group
21
INTENSE PULSED LIGHT HAIR REMOVER ™
Q UE S T IO N S AND ANS WE R S
How should I prepare my skin for IPL hair removal?
Can I use IPL hair removal on sensitive skin?
Ensure your skin is clean. IPL hair removal is most effective
on pale skin. Sunbathing, use of sun beds and fake tanning
should NOT be undertaken prior to treatment.
Yes, the IPL reacts with the hair, so the surrounding skin should
not be affected.
© The Dezac Group
How will my skin appear after the treatment?
How should I prepare the hairs for IPL hair removal?
Usually there will be no perceptible change. A slight redness
after treatment may occur, but will normally fade over 24 hours.
There may be some localised redness around the hair follicle
- this is quite normal. However, if any redness or inflammation
remains after 24 hours this would indicate you have selected
too high a power level for your skin type. Please refer to the
“Patch Test” section.
Shave the area to be treated. Minimising the length of the
hair enables the light energy to go directly to the hair root
and avoids hair burning on the surface of the skin.
© The Dezac Group
What areas can I treat?
Most body hair can be removed using IPL - the most common
areas are underarms, legs, chest, back and bikini line.
Certain areas of the face can be treated, but it should not be
used around the eyes or the lips. Refer to ‘Facial Treatment’
section before using on the face.
After IPL hair removal is there anything to avoid?
Sun exposure or deep tanning should be avoided for at least
48 hours.
What does it feel like?
If the skin is exposed use a sunscreen. Also avoid using
abrasive cleansers or skin peeling treatments. Avoid swimming
in chlorinated water or using a hot tub for 48 hours. The chlorine
in the water can result in itchiness.
Most people experience a warming of the skin. Slight irritation
similar to that of a minor sunburn may be felt if used on too
high a power level, or if the area has not been shaved. Men
undergoing the procedure experience greater discomfort as
male body hair is generally thicker than women’s, however the
sensation quickly disappears.
© The Dezac Group
INTENSE PULSED LIGHT HAIR REMOVER ™
22
QU E S T IO N S AND ANS WER S
How often should I repeat IPL hair removal treatment?
How many treatments will I need?
The timing for follow on treatments is not critical. We initially
recommend treatments at 2 week intervals, although some
people like to treat the area every week and others just
once a month depending on personal preference and on
where the treatment area is. As long as the hair follicle or
surrounding skin is not red, sore or inflamed, treatment can
be repeated after a minimum of 48 hours. Choose a time
which is convenient for you. Avoid excessive treatment on
the same region at one time. This may cause reddening and
swelling. To maintain hair free skin and to ensure disabled
hair follicles remain dormant, repeat the treatment every 4 to
6 weeks or as required.
Long term hair removal with IPL is generally considered to
be effective after a minimum of six treatments over a period
of 6 months. This varies from person to person and depends
on the area you are treating, hair density, your hair’s growth
cycle and colour. Dark hair on fair skin responds to IPL best,
but both dark and fair hair may take several treatments for
long-term results. Initially with each treatment you will notice
a gradual thinning/reduction of hair growth in the treated
area. To maintain hair free skin and to ensure disabled hair
follicles remain dormant, repeat the treatment every 4 to 6
weeks or as required.
© The Dezac Group
© The Dezac Group
Is there any aftercare routine I should follow?
Can I use other hair removal methods between
treatments?
If you wish, you can apply an unperfumed soothing lotion, an
ice pack or wet towel to cool the treated areas, though we
recommend not using soap on the treated areas for 24 hours.
Take care to keep the treated area particularly clean for 3
days. When treating the underarms, avoid using antiperspirant
deodorant for 2–3 days. Avoid unnecessary sun exposure for
48 hours.
Because IPL treatment needs a hair to be present in the follicle,
hair removal methods which pluck the hair, such as waxing,
epilators and tweezing are NOT suitable for use between
treatments. Bleaching hairs is also NOT suitable as it removes
the pigment and renders IPL treatment ineffective. Shaving,
micro-dermabrasion discs and cream depilatories are ideal for
use between treatments.
© The Dezac Group
23
INTENSE PULSED LIGHT HAIR REMOVER ™
Q UE S T IO N S AND ANS WE R S
What is the difference between IPL and a laser?
Other safety features include:
There are two big differences between Lasers and Intense
Pulsed Light. Generally IPL covers a much larger area than
the relatively small treatment spot with lasers and therefore
treatments of larger areas are much quicker. The other
difference is the wavelength of light produced. Lasers produce
light with a specific wavelength whilst IPL uses a broad
spectrum of wavelengths. This limits IPL to specific skin types.
• A keylock
© The Dezac Group
• A security code to prevent misuse.
• Skin sensors on the wand to ensure IPL treatment only
occurs when good contact is made with the skin.
• A bright orange ‘blink safety’ light which will cause a blink
reaction if pointed directly at the eye.
• A UV filter in the IPL aperture to avoid the risk of damaging
UV light.
How big is the treatment area?
© The Dezac Group
35mm x 14mm
• Over temperature detection.
Why is it important to shave?
It is important that any area being treated is shaved so all the
light energy is directed straight to the hair root for maximum
effect. This also prevents burning of the hair above the skin
surface which can be uncomfortable.
Are there any side effects?
As with all hair removers which use light energy, there may be
slight reddening of the skin after use or lightening of the skin in
patches. They should both disappear within 24 hours.
What safety features does it have?
The main safety feature regulates the power level, so that it can
only be increased by 1 step per treatment, starting from power
level 1. This reduces the risk of using too high a power level.
Power can be decreased in as many steps as required.
© The Dezac Group
INTENSE PULSED LIGHT HAIR REMOVER ™
24
I M PO R T A N T
MAI NT ENANCE
• When not in use store key responsibly away from children.
• Only use this product with the power lead supplied.
• IPL should not cause significant discomfort. You may
feel a slight warming of the area. If you feel discomfort or
soreness the setting may be too high.
• After use, always unplug the power lead and store out of
reach of children.
© The Dezac Group
• If there is any damage to the unit, wand cable, wand or
power lead, stop using immediately.
• Do not cover ventilation slots on the wand during use.
• If the power lead is damaged, it must be replaced by the
manufacturer or its service agent or similarly qualified
person in order to avoid a hazard.
• Do not place on a soft surface which might block the
cooling vents on the underside of the console.
• Do NOT use after drinking alcohol, if you are feeling
unwell or fatigued.
• There are no user serviceable parts inside the unit, wand
or treatment cartridge. Do NOT dissemble or repair. If
you have any problems using the product, contact our
Customer Care Department.
© The Dezac Group
• Do NOT use near to shortwave or microwave equipment.
• The equipment may be affected by electromagnetic
interference. If such effects are suspected please turn off
and turn back on to reset.
• To clean, wipe with a slightly damp cloth.
• A build up of deposits on the IPL aperture will affect the
efficiency of IPL. If you notice any deposits, switch OFF
and unplug the mains lead. Clean with a lint free cloth or
cotton bud, ensuring no fibres are left on the aperture.
• Do NOT override any safety features.
• Do NOT use this product for any other purpose other than
those described in these instructions.
• This product is for home-use. It is not intended for use in
a commercial environment.
© The Dezac Group
25
INTENSE PULSED LIGHT HAIR REMOVER ™
S P E C IF I CAT I ON
UNIT:
© The Dezac Group
Light Source: Quartz Xenon Tube
Treatment Area: 35 x 14mm
Output Wavelength: >560mm
Input: 230V AC ~ 50Hz 150W
E N V IR O NME NT
© The Dezac Group
Temperature:
Operating:
Storage:
0 to 50 degrees Celsius
-20 to 70 degrees Celsius
Humidity:
Operating:
Storage:
© The Dezac Group
10% to 80% RH
5% to 90% RH
INTENSE PULSED LIGHT HAIR REMOVER ™
26
D ISP OS AL
The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) has been put in place to recycle products
using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous
substances and avoid the increasing landfill.
© The Dezac Group
The product is classed as Electrical or Electronic equipment so please ensure at the end of the life of this product and
its treatment cartridge they are disposed of in the correct manner in accordance with local authority requirements.
They must NOT be disposed of with household waste.
C ustomer C are
© The Dezac Group
If you have any questions, or if you experience any difficulties with this product, please call our Rio Careline on 01242 702345
or email us at: online@riobeauty.com
To register your two year guarantee online visit: www.riobeauty.com/warranty_online.htm
© The Dezac Group
27
INTENSE PULSED LIGHT HAIR REMOVER ™
© The Dezac Group
© The Dezac Group
© The Dezac Group
www.riobeauty.com
UK
Rio, Dezac and Intense Pulsed Light Hair Remover are trademarks of The Dezac Group Ltd. © The Dezac Group Ltd 2012
Manufactured by The Dezac Group Ltd, PO Box 17, Cheltenham, England GL53 7ET
1-IN-IPHR-UK/4.1
PATENTS PENDING
Download PDF