www.optoma.eu Premium 3D Glasses ZF2100 System / Glasses For the greatest 3D experience, Optoma introduce their 2nd generation wireless 3D glasses… Clear, bright 3D images with high contrast Easy to use – Always in sync, with no line-of-sight required Lightweight and fully rechargeable 1.4kg Keep your glasses looking brand new – cleaning cloth and soft bag provided Hassle-free 3D with wireless operation Stylish, lightweight, foldable design – only 39g Full 3D 720p 3D-XL Ready HD resolution to both eyes using active 3D technology One size for all – fits over prescription glasses ZF2100 Specifications Product Highlights Developed in parallel with our “Full 3D” projectors, the ZF2100 system is optimised to provide higher contrast & brighter images than ever before, while eliminating tedious issues with emitter placement, limited range and potential interference commonly experienced when using Infra-red. Fully rechargeable, our ZF2100 glasses give you the peace of mind that comes with knowing both installing and using them will be hassle free. ZF2100 System and glasses 3D Refresh rate 100/120/144Hz (50/60/72Hz per eye) Dimensions (W x D x H) 160 x 160 x 55 (mm) Weight39g Battery Type Rechargeable Lithium Polymer Battery Life Up to 15 Hours Range Up to 40M (Dependent on environment) Operating Conditions 0'C - 40'C Storage ≤90% Display requirements Projector / Display must have a “3D Sync” connector (VESA DIN3) Supported Projectors HD83, HD33, HD300X, GT750 Supported Accessories See Optoma website for details Infra-Red (IR) Glasses x x x Crystal clear 3D image Easy Set-up Rechargeable ZF2100 System includes: Glasses ZF2100 Emitter vesa 3D-sync Charging Can easily lose sync Difficult install Interferes with remotes ZF2100 Glasses includes: Soft carry bag & cleaning cloth Glasses Charging Soft carry bag & cleaning cloth Optoma Europe Ltd. 42 Caxton Way, Watford Business Park, Watford, Hertfordshire, UK. WD18 8QZ www.optoma.eu V1 - 20/08/12 Copyright © 2012, Optoma Europe Ltd. All other product names and company names used herein are for identification purposes only and may be trademarks or registered trademarks of their respective owners. DLP®, BrilliantColor™ and the DLP logo are registered trademarks of Texas Instruments. All images of products are for representation purposes only. Whilst every care is taken to provide accurate images of our products, actual products may differ slightly. Some product images may have been digitally altered by us to add an Optoma logo to the front panel. Optoma reserves the right to amend or alter actual product or product images without notice. Some images may be simulated. Errors and omissions excepted, all specifications are subject to change without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project