5055 65r eng
������ �� �������� �����
Manual
doro 5055/5065R
Picture shows 5065R.
1
2
3
4
Phonebook 2
Phonebook 1
Talk/Call end button
Keypad/Answering machine
function buttons
5 Menu/Recall button
6 Volume (5055)/Hands Free
Speaker (5065R) button
7 Caller Identification (CID)
button
8 OK/Intercom button
9 Redial/Erase button
Index
Installation
4
Operation
9
Unpacking ..............................4
Connection.............................4
Batteries ................................6
Battery Charge Indicator........6
Range ....................................7
The Display ............................8
Making a Call .........................9
Receiving a Call .....................9
Redial Button .........................9
Volume Control ......................9
Optional Network Services ....10
Handset Paging .....................10
Timer......................................10
Hands Free Function..............11
Phone Book
12
Caller Identification
14
Settings
16
The Handset ringer ................17
Register a New Handset or
Base Unit ...............................18
De-register a Handset............18
De-register all Other
Handsets................................19
Type of Caller ID (CID)...........19
Tone / Pulse Dialling ..............20
Line Adaptation ......................20
Recall Button Timing..............21
PBX Function .........................21
Handset Volume Control
(5065R only) ..........................22
www.doro.com
Expanded System
English
23
General Information............. 23
Multiple Handsets ................ 23
Base Unit Placement ........... 24
Multiple Base Units.............. 24
Intercom Function ................ 25
Transferring Calls Between
Handsets ............................. 25
The Answering Machine
(5065R only)
26
Remote Control
33
Other
34
Switching the Answering
Machine On / Off….. ............ 26
Outgoing Message (OGM) .. 27
Using the Answering
Machine ............................... 28
Personal Message - MEMO 29
Day / Time Stamp................ 29
Number of Rings.................. 30
Remote Code ...................... 30
Recording Quality / Time ..... 31
Announcement only (ANN).. 31
Out of Memory..................... 32
Call Screening ..................... 32
Voice Control ....................... 32
Remote Activation of the
Answering Machine ............. 32
Troubleshooting ................... 34
UK ....................................... 36
Guarantee............................ 36
Australia and New Zealand.. 37
Guarantee............................ 37
REN (RN for New Zealand) 38
3
English
Installation
Unpacking
The package should include the following items:
- Handset
- Mains adapter
- Base unit
- Line cord
- 2 batteries
- User Manual – Guarantee card (AU & NZ only)
Models 5055+1/5065R+1 are also supplied with an extra handset including batteries,
charger and electrical mains adapter.
Connection
1. Connect the mains adapter to the Y socket of the base unit and to
an electrical wall socket.
2. Remove the battery cover from the back of the handset. Insert the
batteries into the handset ensuring correct battery polarity is observed.
Replace the battery cover.
3. Place the handset in the base unit, with the keypad facing outwards.
Once the handset is correctly placed in the base unit, a beep will be
heard and the battery charge indicator in the display will begin to flash.
4. Charge the handset batteries without interruption for 24 hours initially
(thereafter fully discharged handset batteries will take up to 14 hours
to recharge).
5. ONCE CHARGED, connect the telephone line cord to the socket
marked T on the underside of the base unit and then to a telephone
network wall socket.
6. A click will be heard when the modular plug is correctly connected.
7. To setup the answering machine (5065R) please refer to pages 26-32.
4
www.doro.com
Installation
English
Only for models with an extra handset (5065R+1/5055+1):
8. Connect the mains adapter to the Y socket of the charger pod
and to an electrical wall socket.
9. Remove the battery cover from the back of the handset. Insert
the batteries into the handset ensuring correct battery polarity is
observed. Replace the battery cover.
10.Place the handset in the charger pod and charge the handset
batteries without interruption for 24 hours initially (thereafter fully
discharged handset batteries will take up to 14 hours to recharge).
11.ONCE CHARGED, if the range symbol in the display continually
flashes please refer to page 18, Register a New Handset or Base Unit.
IMPORTANT!
Under power failure conditions, this telephone will not operate. Please ensure that a
separate telephone, not dependent on local power, is available for emergency use. The
earpiece of the handset may attract small ferromagnetic objects such as staples and
pins, care should be taken when placing the handset near these items. Do not place the
base unit in areas of high humidity or where it will be exposed to direct sunlight or
other major heat sources. Only use with the supplied power adapter.
www.doro.com
5
English
Installation
Batteries
The telephone is supplied with environmentally friendly nickel
metal hydride (NiMH) batteries, 2 x AAA 1.2V. As with all batteries
performance may degrade over time, should you notice that the standby
time has reduced considerably or there are signs of leakage, both
batteries should be replaced.
Fully charged batteries will last for approx 190 hours in standby or
approx 12 hours call time. The stated times apply under normal room
temperatures and when using fully charged batteries.
Completely discharged batteries will take about 14 hours to fully
recharge (24 hours from new).
Please note that the battery charge indicator in the display flashes while
charging. The flashing will stop when the battery is fully charged.
The base unit has an automatic charging mechanism that prevents the
batteries from being overcharged or damaged due to prolonged charging.
Please note!
To ensure and maintain good charging of the handset battery/s we recommend that the
base and handset charge contacts are cleaned regularly, ie monthly, with a pencil eraser
and/or a soft dry cloth.
When the telephone is installed for the first time, the batteries must be charged for 24
hours before using the telephone. Use DORO original batteries only. The guarantee
does not cover any damage caused by incorrect batteries. The handset is charged with
the keypad facing outwards. Please dispose of any batteries in a responsible and
environmentally friendly manner.
Battery Charge Indicator
The symbol in the display indicates when its is time to recharge the
battery. The symbol has two segments which disappear as the battery
charge decreases. When the battery is running low, the symbol will
appear in the display and a warning tone will be heard. If the handset
is not recharged at this time, the phone will cease to function until it is
recharged.
6
www.doro.com
Installation
English
Range
The range of the telephone varies depending on different factors in the
surrounding enviroment. The radio waves transmitting the call may be
hindered by obstructions, reducing the range.
Specified ranges require unobstructed transmission between the handset
and the base unit. In such ideal conditions, the telephone range can be
up to 300 metres. In a densely populated area, house, apartment, etc.
the range of the telephone will be reduced. Try to get the best range by
relocating the base unit. The ideal location for the base unit is a high
and unobstructed place.
Out of range warning
If during a call the handset is carried too far from the base unit, the
sound quality deteriorates. Unless the handset is moved closer to the
base unit within a few seconds, the call will be lost.
IMPORTANT!
To reduce the risk of possible interference please do not locate the base unit near any
electrical equipment e.g. TV’s, computers, fridges, telecom equipment etc or close to
radiators, metal pipes or window frames. Also ensure the base unit is not exposed to
direct sunlight, excessive heat, damp or high humidity locations.
www.doro.com
7
English
Installation
The Display
Indicator
%
Function
Handset Ringer
p
Programme.
=
Menu.
Battery charge indicator.
Numbers in Caller ID log (CID).
b
Phonebook 1.
Indicates that a call is connected. Flashes when it rings.
i
Intercom call.
Phonebook 2.
Shown within range of the base unit. Flashes when out of
range.
5065R only:
a
Upper row: Answering machine settings.
Lower row: The indicator is lit when the
answering machine is activated.
New incoming messages (ICM) on the answering machine.
Handset volume control.
8
www.doro.com
Operation
English
Important!
Please note when programming all references to press = to press once and then
immediately release the button.
Making a Call
1. Enter the required telephone number. Mistakes can be erased using x.
2. Press O , the telephone number will now be dialled.
3. Press O again to terminate the call.
Receiving a Call
1. Wait for the handset to ring.
2. Press O to answer the call.
3. Press O again to terminate the call.
Please note!
The telephone’s ringing signal does not follow the line signal, ie it may continue to ring
for up to 7 seconds after answering a call. If the telephone cannot connect to a line,
a warning tone will be heard. The problem may be due to the batteries running low,
the handset being too far from the base unit or all of the transmission channels being
engaged.
Redial Button
The five most recently dialled numbers can easily be redialled using r :
1. Press r and scroll to the required telephone number using 8 8 /9 9.
2. Press O the displayed telephone number will now be dialled.
Volume Control
5055: The earpiece volume may be adjusted during a call by pressing
5065R: The volume is adjusted by accessing the menu, please refer to
page 22.
The display will show the selected volume: +=low, ++=medium,
+++=high, and ++++=maximum.
www.doro.com
.
9
English
Operation
Optional Network Services
Access to additional network services (e.g. Call Waiting) can be gained
by using the recall button R , * and # keys. Contact your network
operator for more information.
Press the recall button R followed by the extension number to transfer
calls when connected to a PBX (TBR only).
Handset Paging
Pressing J on the base unit will activate the paging signal of the
handset.
This function is used to help locate the handset or to page the person
carrying the handset. The signal will continue until I on the handset is
pressed.
The page can also be cancelled by pressing J on the base again.
Timer
Within approximately 5 seconds after the connection of a call, a timer
will be shown on the display. The timer helps you keep track of how
long the call lasts.
10
www.doro.com
Operation
English
Hands Free Function
The hands free button s is located on the back of the handset (5055),
and on the front of the handset (5065R). This allows calls to be made
without having to hold the handset.
If you wish, you can switch between handset and hands free during a
call.
1. Enter the required telephone number.
2. Press O . When the call has been connected press s. The hands
free feature will be activated and the conversation can be heard
through the speaker.
3. Place the handset vertically on an even surface, e.g. a table.
4. Speak towards the microphone located on the front edge of the
handset, ensuring that you are no further than 1 meter (3 feet) away
from the handset during the call.
5. If you need to adjust the speaker volume press s repeatedly, the
display will cycle through +=low, ++=high and off settings. To
reactivate hands free press s again.
6. Press O to terminate the call.
Please note!
Please remember that in hands free speaker mode, it is only possible for one person
at a time to talk. The switch over between speaker and microphone is automatic and
dependant on the sound level of the incoming call and the microphone respectively.
It is therefore essential that there are no loud noises in the immediate surroundings of
the telephone, as this will disrupt the speaker function.
www.doro.com
11
English
Phone Book
Using the Phone Book
There are two Phone Books which will store a total of 20 (10+10) telephone
numbers (25 digits maximum) and names (10 characters maximum), this
allows a stored phone number to be dialled using fewer button presses than
if dialled manually. The Phone Books are arranged alphabetically.
If you subscribe to a Caller ID service, the telephone number (and for those
numbers stored in the Phone book) the name of a caller will be shown upon
receiving an incoming call.
Letters
Each number key has been allocated certain letters.
Button
Letters/symbols
1 .................................. [Space character] --1
2 .................................. A B C 2
3 .................................. D E F 3
4 .................................. G H I 4
5 .................................. J K L 5
6 .................................. M N O 6
7 .................................. P Q R S 7
8 .................................. T U V 8
9 .................................. W X Y Z 9
0 .................................. 0
Storing Telephone Numbers/Names
1. Do Not press O .
2. Enter the telephone number, including the area code.
3. Select a Phone book by either pressing b or .
4. Enter a name by pressing the corresponding number button until the
required letter is displayed, please refer to the table on the previous page.
Press x to delete or make changes. Once the first letter has been entered
wait a second or two and repeat this procedure until all you have entered
the entire name required.
5. When the entire name has been entered, press 0.
If you want to enter a Pause in the telephone number, press and hold #
until the display shows --.
12
www.doro.com
Phone Book
English
Dialling from the Phone book
1. Select a Phone book by pressing the corresponding button b or
2. Scroll through the entries using 8 8 /9 9.
3. Press O , the displayed telephone number will now be dialled.
.
Changing Numbers
1. Select the phonebook into which you wish to change the entry by
pressing the corresponding button: b or .
2. Scroll to the desired memory by pressing 8 8 /9 9. Press 0.
3. Press x to delete, use the number buttons to enter the new numbers.
4. Press 0 to confirm the settings.
Erasing a Phone Book Entry
1. Select the phonebook from which you wish to delete the entry by
pressing the corresponding button: b or .
2. Scroll to the desired memory by pressing 8 8 /9 9.
3. Press c (6 )
4. Press 0 to confirm the settings.
5. Press the relevant Phone book button b or
mode.
www.doro.com
to return to standby
13
English
Caller Identification
Explanation of Caller ID
Caller ID allows you to see who is calling before you answer a call,
and see who has called in your absence. If a name is attached to the
telephone number and stored in the phone book, the name will be
shown while the phone is ringing. The call log will store up to 10
telephone numbers, which can easily be retrieved for viewing and
dialling. If you are checking incoming calls on the call log, only the
telephone number will be shown.
New calls are indicated in standby mode by
in the display. If a
voicemail message (Optional Network Services Required) has been
received
will flash. While scrolling through the list two short beeps
will indicate that you have reached the first or the last call.
When the log is full, the oldest number will be deleted automatically, as
the new call is logged.
Please note!
In order for numbers to be shown, the Caller ID service must be provided by your
network operator and a current subscription in place. Contact your network operator
for more information. Some telephone networks will transmit a call description (e.g.
MOBILE) as a name, the number will not be shown while ringing, only when
scrolling in the list.
Retrieving and Dialling CID Numbers.
1. Press
.
2. Scroll to the required telephone number by using 8 8 /9 9. Press 0,
the time and date the call was logged will now be displayed.
3. Press O to dial, or press
to return to the standby mode.
14
www.doro.com
Caller Identification
English
Messages
Besides showing telephone numbers, the display may also show a
message.
No information was received, e.g. when receiving an
****** international
call, voicemail (Optional Network Services
required), secret or blocked numbers.
Removing a Number
1. Press
.
2. Scroll to the required telephone number by using 8 8 /9 9.
3. Press C (6 ).
Transferring Numbers to the Phone Book
1. Press
.
2. Scroll to the required telephone number by using 8 8 /9 9.
3. Select the phonebook into which you wish to save the entry by
pressing the corresponding button: b or
.
4. Enter a name by pressing the corresponding number button until the
required letter is displayed, please refer to the table on page 12. Press x
to delete or make changes.
5. When the entire name has been entered, press 0. The telephone will
return to the standby mode.
www.doro.com
15
English
Settings
Description of the menu system
The telephone has a menu system, controlled by the following buttons:
w ( R)
Activates and deactivates the menu system.
0
Move one step forward and/or confirm selected option.
x
Used to erase/correct.
8 8 (1 )
9 9 (3 )
16
Scroll through the menu alternatives.
www.doro.com
Settings
English
The Handset ringer
There are three different ringer tunes.
- One for regular incoming calls,
- One for incoming calls from numbers stored in Phone book 1 b ,
- One for incoming calls from numbers stored in Phone book 2 .
The display also shows the attached symbol during ringing and only
applies if you subscribe to Caller ID services. There is NO ringer in the
base unit.
1. Press w ( R ).
2. Scroll using 8 8 /9 9 until % flashes in the display. Press 0.
3. Display shows 1/4 and current ringer volume (+=low, ++=medium,
+++=high and ++++=maximum).
4. Scroll using 8 8 /9 9 to the desired setting. Press 0.
5. Display shows 2/4 and current ringer tune for regular incoming calls.
6. Scroll using 8 8 /9 9 to the desired setting. Press 0.
7. Display shows 3/4 and current tune for numbers stored in Phone
book 1.
8. Scroll using 8 8 /9 9 to the desired setting. Press 0.
9. Display shows 4/4 and current tune for numbers stored in Phone
book 2.
10.Scroll using 8 8 /9 9 to the desired setting. Press 0 to confirm.
11.Press w ( R ) to exit the Menu system.
Please note!
If a number stored in the Phonebook is Secret the regular ringer signal will be heard.
Although the caller may be stored in one of the phone books, the first ringer signal
may still be the regular signal until the number has been identified.
The telephone’s ringing signal does not follow the line signal, ie it may continue to ring
for up to 7 seconds after answering a call.
www.doro.com
17
English
Settings
Register a New Handset or Base Unit
To enable the use of more than one handset a registration has to be
performed. Every new handset must be registered in order to use a base
unit. A maximum number of 2 base units can be registered with each
handset, and each base unit can handle up to 4 handsets.
Additional base units and handsets can be purchased from your local
retailer.
Please also refer to page 23 for more information on Expanded Systems.
1. Disconnect the electrical adapter to the BASE UNIT for a few
seconds, and then reconnect.
2. Press w ( R ).
3. Scroll using 8 8 /9 9 until P starts flashing in the display. Press0.
4. Enter the PIN code (1111 for this model). Press 0.
5. The handset will now search for the base unit.
6. If the registration is successful the handset will return to standby
mode in a few seconds (max 90 seconds). If registration is
unsuccessful repeat this procedure.
De-register a Handset
Handsets can easily be de-registered from a base.
1. Press w ( R ).
2. Press the keypad digits 9 4.
3. Enter the PIN code (1111 for this model).
4. Press 0.
18
www.doro.com
Settings
English
De-register All other Handsets
All other handsets except the one on which you perform the operation
below, can easily be de-registered from a base.
1. Press w ( R ).
2. Press the keypad digits 9 5.
3. Enter the PIN code (1111 for this model).
4. Press 0.
Type of Caller ID (CID)
Dependant on your network sytem requirements the Caller ID settings
may need to be adjusted.
If the telephone has been purchased in Australia this setting will be
displayed as 1/4.
1. Press w ( R ).
2. Scroll using 8 8 /9 9 until w flashes in the display. Press 0.
3. Press 0 repeatedly until the display shows 1/5 - UK (1/4 Australia).
4. Scroll using 8 8 /9 9 to the desired setting:
1=BT for UK/Normal for Australia
2=CCA for UK/Polarity reversal for Australia.
5. Press 0 to confirm setting and move to the next programming
sequence, alternatively.
6. Press w ( R ) to exit the Menu system.
www.doro.com
19
English
Settings
Tone/Pulse Dialling (UK only)
Select dialling type (tone or pulse). The default setting is tone dialling,
dependant on your network system requirements this may not require
changing.
This setting only applies to models purchased in the UK.
1. Press w ( R ).
2. Scroll using 8 8 /9 9 until w flashes in the display. Press 0.
3. Press 0 repeatedly until the display shows 2/5.
4. Scroll using 8 8 /9 9 to the desired setting (TONE/PULSE). Press
0 to confirm setting and move to the next programming sequence,
alternatively.
5. Press w ( R ) to exit the Menu system.
Line Adaptation
On some telephone networks and PBX systems, it may be necessary to
adjust the microphone level.
If the telephone has been purchased in Australia this setting will be
displayed as 2/4.
1. Press w ( R ).
2. Scroll using 8 8 /9 9 until w flashes in the display. Press 0.
3. Press 0 repeatedly until the display shows 3/5. - UK (2/4 - Australia).
4. Scroll using 8 8 /9 9 to the desired setting (A/B=normal, C=medium,
D=low).
5. Press 0 to confirm setting and move to the next programming
sequence, alternatively.
6. Press w ( R ) to exit the Menu system.
20
www.doro.com
Settings
English
Recall Button Timing
In some PBX installations, the timing of the Recall button may need to
be adjusted. For normal domestic use, this setting should not require
changing.
If the telephone has been purchased in Australia this setting will be
displayed as 3/4.
1. Press w ( R ).
2. Scroll using 8 8 /9 9 until w flashes in the display. Press 0.
3. Press 0 repeatedly until the display shows 4/5. - UK (3/4 - Australia).
4. Scroll using 8 8 /9 9 to the desired setting:
= 100ms
= 270ms (UK) - 600ms (AU/NZ)
5. Press 0 to confirm setting and move to the next programming
sequence, alternatively.
6. Press w ( R ) to exit the Menu system.
PBX Function
This telephone has a PBX function that will automatically insert a pause
between the first and second digits of the telephone number before dialling.
For example: When the function is activated (see below), dialling a phone
number ie: ”0123456”, the phone will dial: “0” followed by a pause, and
then the remaining part of the number: “123456”.
If the telephone has been purchased in Australia this setting will be
displayed as 4/4.
1. Press w ( R ).
2. Scroll using 8 8 /9 9 until w flashes in the display. Press 0.
3. Press 0 repeatedly until the display shows 5/5. - UK (4/4 - Australia).
4. Scroll using 8 8 /9 9 to the desired setting (YES=on, NO=off). Press
0 to confirm.
5. Press w ( R ) to exit the Menu system.
www.doro.com
21
English
Settings
Handset Volume Control (5065R only)
1. Press w ( R ).
2. Scroll using 8 8 /9 9 until
flashes in the display. Press 0.
3. Scroll using 8 8 /9 9 to the desired setting (+=low, ++=medium,
+++=high, and ++++=maximum). Press 0 to confirm.
4. Press w ( R ) to exit the Menu system.
22
www.doro.com
Expanded System
English
General Information
DECT (Digital Enhanced Cordless Telephone) technology offers
superior performance, clarity and security using its completely digital
method of transmission.
You can:
- Use (register) up to 4 handsets with the same base unit.
- Use (register) up to 2 base units with the same handset.
- Make internal calls (intercom) and transfer calls between handsets
using the same base unit.
Additional base units and handsets can be purchased from your local
retailer.
This model is GAP (Generic Access Profile) compatible, which means
that the handset and the base unit can both be used with most GAP
compatible units irrespective of manufacturer.
Multiple Handsets
The combination of multiple base units and multiple handsets provides
for many useful applications. So long as all handsets are programmed to
the same base unit.
- Any handset can answer incoming calls, and make outgoing calls.
- External calls can be transferred between handsets.
- Internal handset to handset communication (intercom).
www.doro.com
23
English
Expanded System
Base Units Placement
If you wish to use several handsets with one base unit, you should make
sure that the base unit is placed “in the middle”, to evenly divide the
base unit range among the handsets.
If you wish to use several base units to achieve an extended coverage
within a specific area, eg a large home or office, a storage area, etc, then
it is important that the range of the base stations overlap. If not there
may be a reduced communication in certain areas where a handset has
no signal from the base units.
Multiple Base Units
By connecting several base units to the system, the useful range for
the handset can be expanded.. Registering multiple base units with the
handset will cause the handset to automatically connect to another base
if and when it loses contact with the current base unit Another practical
application could be to have one base station at home and one at work.
Then the same handset can be used in both places.
The handset remains in contact with its base unit until it goes out of
range. When this happens, the handset will begin to search for another
base from its list of registered base units. It is essential that the range
of the base units overlap, in order to achieve uninterrupted coverage.
The transfer from one base unit to another will then be automatic,
however, this will not occur while a call is in progress. If not, there may
be reduced communication in certain areas where the handsets have no
signal from the base units.
More about placement of the base units on the next page.
IMPORTANT!
Automatic switching between base units (handset handover) will not occur while a call
is in progress.
24
www.doro.com
Expanded System
English
Intercom Function
When using several handsets with the same base unit, calls can be made
internally between the handsets, this is referred to as an internal call.
Internal calls can only be made between handsets operating on the same
base unit.
1. On the handset press I .
2. All other handsets will now ring.
3. Answer the call by pressing O on one of the other handsets.
If an external call is received while an intercom call is in progress, a
tone will be heard. You will then have to terminate the intercom call to
answer.
Transferring Calls Between Handsets
An external call can be transferred from one handset to another (so long
as both handsets are operating on the same base unit).
1. While an external call is connected on line.
2. Make an internal call according to the description above. A tune will
be played to the incoming caller.
3. Answer the call by pressing O on one of the other handsets, when
the call has been answered press O on your handset.
If you decide not to transfer the call, press I on your handset to return
to the external caller.
www.doro.com
25
English
The Answering Machine (5065R)
About the Answering Machine
The answering machine has to be turned on in order to receive
messages. On incoming calls the telephone will be answered after the
selected number of rings (please refer to page 23).
When the answering machine answers an incoming call, the caller will
hear your outgoing message (OGM) followed by a short beep, at which
point they can leave an incoming message (ICM) of up to 2 minutes in
length. Should the caller exceed this limit, the call will be disconnected.
The answering machine can record between 5 and 7 minutes of
incoming messages (ICM’s) depending on the selected sound quality
(high or standard). Please refer to page 24.
Switching the Answering Machine On/Off
1. Press a located on the back of the handset, the button will
illuminate (for upto 40 seconds) and the number of new ICM’s will
be announced. All answering machine features can only be accessed
while a is illuminated.
2. To switch the answering machine on, press keypad digit 7. a will
be on in the display.
3. To switch the answering machine off, press keypad digit 9. a will
be off in the display.
26
www.doro.com
English
The Answering Machine (5065R)
Outgoing Message (OGM)
The OGM is your announcement to the caller and may be up to 2
minute in length. If you choose not to record your own OGM, the caller
will hear a prerecorded OGM. Use your OGM to advise the caller to
begin talking after a beep is heard. For example:
“Hello, we are unable to take your call right now, please leave a message
after the beep, and we’ll return your call as soon as possible. Thank you
for calling.”
Recording your OGM
1. Ensure the a symbol is visible within the display, and the a
button located on the back of the handset is illuminated.
2. The total number of (new) recorded ICM’s will now be announced.
3. Press 8 to stop playback.
4. Press 4 5.
5. Record your OGM.
6. Press 8 to stop recording.
7. Your OGM will be repeated after a few seconds. Repeat the same
procedure if you wish to change the OGM. Any old OGM will
automatically be erased when a new one is recorded.
Checking your OGM
1. Ensure the a symbol is visible within the display, and the a
button located on the back of the handset is illuminated.
2. The total number of (new) recorded ICM’s will now be announced.
3. Press 8 to stop playback.
4. Press 5.
5. Your current OGM will now be replayed.
6. At any point you can press 8 to stop playback.
www.doro.com
27
English
The Answering Machine (5065R)
Using the Answering Machine
When new ICM’s are recorded
will flash in the display and also the
a button on the back of the handset. Playback will always be new
ICM’s only, the answering machine will then return to standby mode.
Press 2 to playback all messages, starting with the oldest ICM.
1. Ensure the a symbol is visible within the display, and the a
button located on the back of the handset is illuminated.
2. The total number of (new) recorded ICM’s will now be announced.
Before each ICM the day and time the message was received will be
announced, and a short beep will be heard between each message.
3. Listen to your ICM’s, or press 8 to stop playback.
4. Select an operational command from the table below by pressing the
corresponding button.
5. All messages will be saved (unless erased during playback) and new
messages will be recorded after any old messages.
Command
Function
1 ..................................Repeat/skip to previous message
2 ..................................Playback of messages
3 ..................................Skip to next message
42 ................................Record a MEMO (to stop recording press 8)
45................................Record new outgoing message, (to stop
recording press 8)
6 ..................................Erase individual messages during playback
6 (press & hold)...........Erase all messages after playback
7 ..................................Switching On the answering machine (the
display will show a )
8 ..................................Stop
9 ..................................Switching Off the answering machine (the
display will no longer show a )
28
www.doro.com
English
The Answering Machine (5065R)
Personal Message - MEMO
MEMO – is a personal message recorded directly onto the answering
machine without dialling. This means that the machine may be used as
an electronic notebook, where messages, reminders or other notes to
family members or colleagues can be recorded.
Each MEMO can be recorded for up to 2 minutes.
1. Ensure the a symbol is visible within the display, and the a
button located on the back of the handset is illuminated.
2. The total number of (new) recorded ICM’s will now be announced.
3. Press 8 to stop playback.
4. Press 4 2 and record your MEMO message.
5. Press 8 to stop recording.
Day/Time Stamp
The answering machine has a voice function that announces the day and
time when each message (ICM) was recorded.
1. Press w ( R ).
2. Scroll using 8 8 /9 9 until a flashes in the display. Press 0.
3. The display will show 1/5. Scroll using 8 8 /9 9 until the correct day of
the week is displayed (1=Monday, 2=Tuesday…..7=Sunday). Press 0.
4. The display will show 2/5. Enter correct time (HR:MIN) using the
telephone keypad. (24 hour display)
5. Press 0 to confirm setting and move to the next programming
sequence, alternatively.
6. Press w ( R ) to exit the Menu system.
www.doro.com
29
English
The Answering Machine (5065R)
Number of Rings
The number of rings before the answering machine answers can be
selected between 2, 3, 4, 5 or TOLL SAVER.
1. Press w ( R ).
2. Scroll using 8 8 /9 9 until a flashes in the display. Press 0.
3. Press 0 repeatedly until the display shows 3/5.
4. Scroll using 8 8 /9 9 to the required setting (2, 3, 4, 5 or TOLL). Press
0 to confirm setting and move to the next programming sequence,
alternatively.
5. Press w ( R ) to exit the Menu system.
Please note:
With Toll Saver selected, calls will be answered after five rings until a new ICM
message has been recorded, any subsequent calls will be answered after three rings.
Once these ICM’s have been erased this cycle will be repeated. This is useful when
remote accessing your unit, if there is no answer after four rings no ICM messages have
been recorded, you can therefore terminate the call before you are charged.
Remote Code
The four digit code is required to gain access to the remote functions of the
answering machine (1111 when supplied). To increase security and simplify
usage this code can be altered to any four digit number of your choice.
1. Press w ( R ).
2. Scroll using 8 8 /9 9 until a flashes in the display. Press 0.
3. Press 0 repeatedly until the display shows 4/5, the current four digit
code will now be shown in the display.
4. Enter your new four digit code on the handset keypad. Press 0
to confirm setting and move to the next programming sequence,
alternatively.
5. Press w ( R ) to exit the Menu system.
30
www.doro.com
English
The Answering Machine (5065R)
Recording Quality / Time
There are two choices of recording quality/time.
A - high quality recordings (total time 5 minutes maximum).
B - standard quality recordings (total time 7 minutes maximum).
1. Press w ( R ).
2. Scroll using 8 8 /9 9 until a flashes in the display. Press 0.
3. Press 0 repeatedly until the display 5/5.
4. Scroll using 8 8 /9 9 to the required setting (A/B). Press 0 to
confirm.
5. Press w ( R ) to exit the Menu system.
Announcement Only (ANN)
ANN is your announcement message to a caller in which contact
information can be supplied but no incoming message (ICM) will be
recorded.
An example ANN message:
“Sorry I cannot take your call at this time, if urgent try contacting me
on 0746 ……. Please do not leave a message as this will not be recorded.
Thanks for calling.”
To select ANN
1. Press w ( R ).
2. Press 9 8.
3. The display will show 1/1. Scroll using 8 8 /9 9 to the required
setting.
--)+(-- = play OGM and record ICM
--) = ANN only.
4. Press 0.
www.doro.com
31
English
The Answering Machine (5065R)
Out of Memory
The answering machines maximum recording capacity will be either
5 or 7 minutes (depending on the selected sound quality). This time is
shared between the OGM, MEMO and ICM messages.
If the memory is full, no new ICM messages will be accepted until the
existing messages have been played and erased.
When the memory is full the a symbol in the display will flash, the
answering machine will respond after approximately 9 rings to allow
remote playback and deletion of messages.
Call Screening
Incoming messages (ICM’s) can be heard (screened) on the handset
loudspeaker as they are received. Press s while the ICM is being
recorded. You can also press O to speak directly to the caller.
If you are answering the call from another telephone, press # # to
terminate recording.
Voice Control
The answering machine will record an ICM so long as the caller keeps
speaking (max. 2 minutes). If the caller stops speaking for more than 7
seconds the answering machine will disconnect the call.
Remote Activation of the Answering Machine
The answering machine can be remotely turned on, so long as the
electrical supply is connected and live.
1. Dial the telephone number to which the answering machine is
connected. After approximately 9 rings the machine will answer and
a tone will be heard.
2. Enter your four digit remote code (1111 when supplied).
3. Press 7. The answering machine is now switched ON.
4. Replace the handset.
32
www.doro.com
The Answering Machine (5065R)
English
Remote Control
This machine can be remotely accessed using an ordinary tone dialling
telephone. Dial the telephone number to which the answering machine is
connected, after the OGM has been played enter your Four digit remote
code. Once the code is accepted several remote options are available.
1. Dial the telephone number to which the answering machine is
connected.
2. Press * after the OGM is played.
3. Enter your four digit remote code (1111 when supplied).
4. The number of new ICM’s will be announced, and then playback will
begin, (to stop playback press 8 ).
5. Select an option from the list below.
6. Once you have finished accessing the machine replace the handset.
Command
Function
1 .................................. Repeat/skip to previous message
2 .................................. Playback of messages
3 .................................. Skip to next message
42 ................................ Record a MEMO, (to stop recording press 8)
45 ................................ Record new outgoing message, (to stop
recording press 8)
6 .................................. Erase individual messages during playback
7 .................................. Switching On the answering machine
8 .................................. Stop
9 .................................. Switching Off the answering machine
Please note!
If the machine doesn’t respond correctly to the remote control commands, try pressing
the telephone buttons for a longer or shorter time. In normal cases, the answering
machine should react to tones approximately 0.5 – 1 seconds in length, but longer
tones may be necessary on certain telephone networks.
If you do not enter any remote control command, the answering machine will disconnect
after a few seconds.
www.doro.com
33
English
Other
Troubleshooting
Check that the telephone cord is undamaged and properly plugged in.
Disconnect any additional equipment that may be connected. If the
problem is resolved, the fault is with the other equipment.
Test the equipment on a known working line. If the product works then
the fault is with the line. Please inform your local telephone company.
No Number Shown in Display when Ringing
- In order for this feature to function, you must subscribe to the Caller
Identification service from your network provider.
- If
is shown in the display, it either means that no
******
information was sent about the calling number, or that the caller has
a secret telephone number. It may also be a voicemail message.
- If MOBILE is displayed, the network operator has sent this call
description as a name, the telephone number will only be visible when
scrolling through the call list, press 0 when name is shown.
- It may not be possible to receive CID information if the phone
operates in a PBX system.
Warning Tone During a Call
- The batteries may be running low (recharge the hand unit).
Telephone Does Not Work
- Check that charge contacts in handset and base unit are clean.
- Check the adapter, is it correctly connected to the base unit and to
the mains power?
- Check that the telephone cord has been correctly connected to the
base unit and to the line socket, by disconnecting and reconnecting
both ends.
- Check the charge status of the handset batteries.
- Try connecting another telephone, known to be in working order, to
the line socket. If that phone works then it is likely that this
equipment is faulty.
34
www.doro.com
Other
English
The Answering Machine Is Not Answering
- Check that the unit is switched on
- Check that the telephone cable and the mains adapter are correctly
connected.
- Check that the answering machine is not full.
The Answering Machine Does Not Respond to Remote Control
- Check that the telephone you are using to remotely control the
answering machine is a tone dialling telephone.
- Some telephones only output a short tone beep when buttons are
pressed, and this may not be enough to activate remote control.
Please use a separate tone transmitter in these cases.
- Also try holding the buttons down longer, approximately 1 second
per digit.
I can’t hear the outgoing message very well
- Record a new outgoing message.
- Speak closer to the microphone when recording.
The line is disconnected when someone leaves a message:
- An incoming message may be up to 120 seconds in length. After this
time, the call will be disconnected.
- If the caller pauses approximately 7 seconds or more, the call may be
terminated, since the voice control function believes that the caller
has hung up.
- If the function Announcement only is activated the caller cannot
leave a message.
If the telephone still does not work, contact the place of purchase. Don’t
forget the receipt or copy of the invoice.
www.doro.com
35
English
Other
UK
If you cannot resolve the fault using the faultfinder section, technical
support is available on the Premium Rate Number: 0906 302 0114.
Calls cost 50 pence per minute (prices correct at the time of going to
press), and is operational between 9AM - 5PM Monday-Friday excluding
Bank Holidays. Alternatively, E-mail on: tech@doro-uk.com
You can contact us in writing: Consumer Support Group, Doro UK
Ltd., 22 Walkers Road, North Moons Moat, Redditch, Worcestershire,
B98 9HE, (regarding any Spares or Technical query), or
Telephoning (Spares only): 01527 584377
Web site: www.doro-uk.com
Specific Absorption Rate (SAR)
This telephone complies with applicable international safety
requirements for exposure to radio waves.
The SAR-value of this product is not greater than 0.022 W/kg (measured
over 10g of tissue).
The maximum limit according to WHO is 2W/kg (10g of tissue).
Guarantee
This product is guaranteed for a period of 12 months from the date of
purchase.
Proof of purchase is required for any service or support required during
the guarantee period.
This guarantee shall not apply to a fault caused by an accident or any
similar incident or damage, liquid ingress, negligence, abnormal usage,
not reasonably maintained or any other circumstances on the purchaser’s
part. Furthermore, this guarantee shall not apply to a fault caused by a
thunderstorm or any other voltage fluctuations.
This guarantee does not in any way affect your statutory rights. (As
a matter of precaution, we recommend disconnecting the telephone
during a thunderstorm.)
36
www.doro.com
� ��
�
�������
Other
English
��� ��
����
Australia and New Zealand
Products permitted for connection to the telephone network are marked
�� ����������
with
in Australia
and
in New Zealand. These marks
indicate the products comply with the regulations and can be used
without concern in the country of purchase.
If you believe this product is malfunctioning, please refer to the relevant
section and/or consult the troubleshooting guide in this manual
to ensure that you have followed the instructions carefully. As an
alternative you can visit our web site for FAQ’s or send an e-mail for a
prompt reply.
Electro Magnetic Radiation (EMR)
This telephone complies with applicable safety requirements for
exposure to radio waves.
The mean power of this telephone is not greater than 11.5 mW.
This is below the 20mW limit at which testing is required.
Guarantee
This product is guaranteed for a period of 12 months from the date of
purchase.
Should you experience difficulties with the product, please contact us for
assistance. If the product is then found to be faulty you will be asked to
return it directly to us with a copy of the purchase receipt.
This guarantee shall not apply to a fault caused by an accident or a
similar incident or damage, liquid ingress negligence, abnormal usage,
not reasonably maintained or any other circumstances on the purchaser’s
part. Furthermore, this guarantee shall not apply to a fault caused by a
thunderstorm or lightning, excessive or any other voltage fluctuations or
faults on the telephone line. (As a matter of precaution, we recommend
disconnecting the telephone during a thunderstorm).
This guarantee does not affect your statutory rights.
www.doro.com
37
English
Other
AUSTRALIA
NEW ZEALAND
Consumer Support
Ph: (02) 8853 8444
Fax: (02) 8853-8489
Email: support@doro.com.au
Web site: www.doro.com.au
Consumer Support
Ph: 0900 500-25 (Toll Call)
Fax: (09) 574-2722
Email: support@atlasgentech.co.nz
DORO Australia Pty Ltd
PO Box 6760
Baulkham Hills BC NSW 2153
Australia
Atlas Gentech (NZ) Limited
Private Bag 14927
Panmure
Auckland
New Zealand
REN (RN for New Zealand)
The REN (Ringer Equivalence Number) or (RN) is of significance only
if you wish to connect more than 1 telephone to your telephone line.
A standard telephone line has a maximum REN capacity of 3 (RN of
5). It is possible to connect 3 devices with a REN of 1 (RN of 1) with
no degradation to the product’s performance. Exceeding this limit may
cause the volume of the ringer in any phone to decrease or not ring at
all.
Answering Machines
Please note when set to answer after 2 rings this product may block
CID information when used in conjunction with certain distinctive ring
signals (FaxAbility).
38
www.doro.com
English
Version 1.2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising