SWS SeceuroShield 6000, 7500, 7700, SeceuroVision 8000, 7500, 3800, 3800, 7500, 8000, SeceuroScreen 1500, 3801 security shutters, SeceuroVision 9000 roller grille Technical guide

www.samsondoors.co.uk

0800 328 6250 www.samsondoors.co.uk

SHUTTERS TECHNICAL GUIDE

November 2005

3

BUILT-ON SECURITY SHUTTERS

TECHNICAL GUIDE


PROPERTY PROTECTION SYSTEMS

Commercial

Retail

Counter & Cabinet

Domestic




Built-On Security Shutters Technical Guide

CONTENTS

Range Over view

Typical Arrangements

Electric Operation Shutters

Spring Assisted Shutters

Page

1-2

3-4

5-6

7-8

Rod Crank & Belt Operated Shutters 9-10

INTRODUCTION

Our product range has been developed in Britain to provide an architecturally acceptable answer to the growing demand for vandalism and burglary protection on domestic, commercial and retail properties.

The SECEURO range of products are compliant with the latest

European product directives and standards including

BSEN 13241-1 applicable from the 1st May 2005.

The uniquely neat finish of the Seceuro range of security window shutters is particularly evident when they are built-on to an existing building with compact aluminium boxes, styled to minimise their visual impact.

The slimline finish makes internal fitting of window shutters a frequent choice. Our continuous programme of product development has produced a compact shutter of exceptional strength for small to medium size apertures.

Installations nationally protect windows and doors on city centre, suburban and rural homes, offices, factories, sports centres, medical premises, schools, community centres, computer rooms and golf clubs. In short, any building where security is a concern.

OPERATION

Swivel/geared belt

Shutters are raised and lowered from inside by a belt.

Depending upon shutter size the belt is operated manually or by geared crank handle. This is a lower security option.

Rod crank

Shutters are raised and lowered from inside by a geared rod crank winding handle which hangs down vertically underneath the box and secures on a clip when not in use.

Spring loaded

For external operation on exit doors, shutters can be spring loaded with a transverse key lock in the bottom slat. Also a popular option for bar, servery, counter, cabinet and kiosk applications. (N.B. The bottom slat projects below the shutter when fully raised, check that this will not obstruct outward opening doors)

Electric

Motors are required on larger shutters and are optional on smaller shutters. Tubular motors fit inside the axle and require a 3 amp fuse. Operation is by rocker switch, key switch or remote control. A manual override can be specified to operate from inside. Where desirable a manual override can also be engaged through the outside of an externally fitted shutter box. Under these circumstances a lockable override cover is available as an optional extra to maximise security. Multi-shutter electric installations can be wired to operate from a central or group switches. Ask for further details. Care should be taken to ensure that such installations are in line with current Health and

Safety Legislation.

Users must be instructed to operate electric shutters with care, particularly when lowering. Check that the shutter operates smoothly when lowering, do not leave running unattended. If the shutter does not start to descend immediately or falters during operation, stop at once, reverse the shutter and try again. If the problem persists the shutter must be checked by an engineer. If an electric shutter is left to run unattended and damage occurs to the shutter any guarantee is void.

Clear instruction must be given to users on the manual override winding direction to raise the shutter. Winding the shutter downwards beyond the normal stop point will damage the shutter.

Power Requirement

A Shutter up to 5sqm/50kg typically draws 1.1A/240W

A Shutter up to 10sqm/100kg typically draws 1.5A/320W

Thermal Cut Out Switch

Tubular motors have a thermal cut out to prevent overheating after approximately four minutes of continuous running. This may cut in while setting limit switches; wait 15-30 minutes then restart the motor.

CE Marking

All power-operated shutters are supplied with full CE marking documentation to assist in compliance with:

The Supply of Machinery (Safety) Regulations 1992

The Health and Safety at Work Act 1974

FINISH

The shutter box, guide rail and bottom slat are typically powder coated in white or dark brown as standard. The shutter slats come in a variety of colours depending on the product. Please refer to the table opposite for more details. Standard R.A.L. or BS colours are also available at a surcharge on most products.

SIZING

All shutters are individually made to customers sizes and specifications to maximise security. Maximum sizes may alter depending upon the application, wind loading or whether installed as a secondary or sole opening closure.

MAINTENANCE

Window shutters primarily require keeping clean, particularly on city centre or coastal installations. Commercial installations should have a maintenance check every year. The guarantee period on all shutters is 18 months and covers replacement parts only. External key operated locks require frequent lubrication (light grade SAE oil).

PERFORMANCE

Security

A locking device operates automatically when the shutter is fully lowered. Spring assisted shutters are fitted with a key lock fitted centrally in the bottom slat. Burglary resistance can be further enhanced by the use of bullet locks (see page 7). Reinforcing angle on the cill for the shutter to sit down behind is recommended on wide or vulnerable installations. Extruded slats are utilised for optimum security.

Shading/blackout

Shutters can be stopped at any point to be used for shading (with the exception of spring operated shutters). This is enhanced by the optional light slits on the foam filled CD150 slats. When the shutter is fully closed it is effectively a blackout blind.

Thermal and acoustic conductivity

The K value of a double glazed window fitted with a foam filled shutter is further improved by 35% from 1.8 to 2.6 w/m2 K. The improvement is virtually the same with an extruded slat. These products can also be used to reduce unwanted background noise.

INSTALLATION/SUPPLY

Detailed installation instructions are available for each shutter type; installation and supply are carried out by approved installers.

INSTALLATION OPTIONS

The shutter can be installed around the reveal or in the reveal, internally or externally, depending on the window/door configuration and client preference. The following pages detail the sizing and layout options for each type of built-on shutter operation. Each has technical advantages and limitations, particularly on maximum sizes. All shutters require a cill or flat solid floor to close down onto. On new build projects we recommend built-in shutters, details of which are available in a separate brochure.

1 www.samsondoors.co.uk




MAXIMUM/MINIMUM DIMENSIONS, WEIGHTS,

APPLICATIONS, FINISHES & OPERATION

At a glance

Shutters coil with the concave side facing the barrel.

The fixing position of the shutter box determines the visible external face of the shutter slats. 7500 slats are also able to coil in reverse (convex side facing the barrel) allowing the preferred visible external face to be selected irrespective of shutter fixing position. Reverse coiling increases the coil size - see box size data for a given height.

Insurance Approved

5

Security Shutters

TM

3801

3800

See-Through Shutters

Punched/Glazed 45% Vision

3800


Perforated 17% Vision

7500



8000


Punched & Glazed 62% Vision

4

See-Through Roller Grille

55/69% Vision

9000

Built-On Security Shutters

1500

TM


3800

TM


6000

TM


7500

TM


7700

Concave

Face

Approved

Convex

Face

1

Max/Min Overall Size (wxh)

Max Area in sqm

Material Type / Curtain weight

White/Brown Satin

/ Servery

/ Kiosk

Galvanised

Silver

Anodised

/ Cabinet

Applications

Manual Rod Geared Swivel

Option

Belt operation

**

Belt

this

assisted

**

is a this low is a low security security option option

Standard Curtain Finish Operation/max.area m 2

Min Width 900mm

Max 3000mm x 4000mm

Max Area 12sqm

Extruded Aluminium / 8kgm

2

Min Width 500mm

Max 3000mm x 5000mm

Max Area 12sqm

Extruded Aluminium / 6.5kgm

2

Min Width 500mm

Max 3000mm x 5000mm

Max Area 12sqm

Extruded Aluminium / 6.5kgm

2

Min Width 900mm

Max 6000mm x 3400mm

Max Area 15sqm

22 swg Steel / 8kgm

2

6

Min Width 900mm

Max 6000mm x 5000mm

Max Area 20sqm


2

Min Width 900mm

Max 5000mm x 4000mm

Max Area 13sqm


2

2

4

Min Width 500mm

Max 3400mm x 4000mm

Max Area 8sqm

Insulated Rolled Aluminium / 4.5kgm

2

Min Width 500mm

Max 4000mm x 5000mm

Max Area 12sqm


2

Min Width 900mm

Max 6000mm x 5000mm

Max Area 20sqm


2

Min Width 900mm

Max 6000mm x 3400mm

Max Area 15sqm

22swg Steel / 10kgm

2

6

Min Width 900mm

Max 5400mm x 4000mm

Max Area 16sqm

Insulated Rolled Aluminium / 5kgm

2 l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l l

3

3

l l l l l l l l l l l l

12

12

12

15

20

13

8

12

20

15

16

9

9

10

8

8

6

7

8

8

12

4.5 3.8 2.3

4.5 3.8 2.3

6.5 5.5 3.3

3.5

3 2

1

2

3

4

Sizes quoted may not be available with some operation modes (see the data for each operation type for confirmation) and may alter depending upon product application, wind loading or whether installed as a secondary (such as over a window) or sole (such as a garage) closure for an opening.

9.25kgm

2 with glazing.

SeceuroShield 7700 slat standard colour option is light beige in place of cream, and is available in a range of 7 colours. Woodgrain finish also available as an option for SeceuroShield 7700 &

SeceuroScreen 1500.

150mm link spacing 6kg/sqm with 69% vision as standard or optional 75mm link spacing 7kg/sqm with

55% vision (shown).

5

6

The validity of the LPCB certification is contingent upon each security shutter being installed in accordance with the requirements of LPS 1175.

Please note the maximum sizes quoted for SeceuroVision 7500 and SeceuroShield 7500 are applicable to the continental style shutter with aluminium head box and guide rails. These products are also available with traditional galvanised steel channels and head box. The maximum sizes for the traditional style are as follows: maximum width 6400mm, maximum height 4700mm and maximum area 20sqm.

NOTE:

The standard colours are for the curtain only. Guides, shutter box and the bottom rail are supplied in white or dark brown as standard.

Colour matching to the curtain is an optional extra - please request clarification for the shutter chosen.



2


HEAD DETAILS

Typical arrangement shown


Built-On Shutters - Typical Arrangements

GENERAL ARRANGEMENT

Shutter box

The shutter coil is completely encased in a two piece, roll formed aluminium box, available in a range of six sizes according to the shutter height and slat type The box is styled with a 45° chamfer to minimise the visual impact. On large electric operation shutters which require a manual override the box extends beyond the width of the guides to accommodate the override mechanism on the drive side (see page 4).

Lugs at each end of the box locate into the box section of the guide rail.

Shutter slats

A range of profiles is available dependent upon the security and/or vision requirement.

Aluminium shutters

are available in extruded aluminium in single and twin wall profiles and roll formed in twin wall foam insulation filled profiles.

Steel shutters

The SeceuroShield/Vision 7500 is a single wall profile in 22swg steel. The bottom slat further allows for tailoring of security level.

Operation

By Rod crank, Swivel/geared belt,

Spring loaded or Electric (shown)

Safe operation of shutters which are not visible from the point of operation must be considered.

Guide rails

Constructed from extruded aluminium with a brush pile or neoprene liner for quiet, smooth operation. The guide rail is strengthened by a box section which also provides a separate fixing position and allows the shutter box to locate into.

Size varies with slat type, shutter size and level of security. For locations with high security risk areas or high wind loading a windlock guide is available for some slat types.

JAMB DETAILS

bottom slat hang down

The bottom slat hangs down from the bottom of the shutter box when the curtain is fully raised. For exact distance, see appropriate bottom slat profile section. In some cases the positioning of the shutter box can be set higher to ensure a clear opening, dependant upon the position of the lintel.

Detail: Built-On

External Face Fix



External Reveal Fix



Internal Reveal Fix

END LOCKS

Typical endlock arrangement

Extruded slats


External Face Fix


External Reveal Fix


Internal Reveal Fix

GENERAL DETAILS

SHUTTER BOX & 45˚ CANOPY

Detail: Box fixing showing optional 45˚ Removable canopy

GUIDE FIXING

Foam filled slats

Secured by rivets, crimping or staples depending on slat size/type

Fixing must go through end flanges of the end plate

Detail: Guide reveal fixing Detail: Guide Face fixing

BOTTOM SLAT DETAIL

Please note 350mm box will be supplied in three sections rather than two

3

Detail:

Bottom slat with optional reinforcing angle

2

1





80mm

CONTROL SWITCHES

AUTOMATION & CONTROLS

80mm 75mm

70mm

75mm

80mm

MOTOR WIRING

80mm

Inis Uno Single Control

45mm

90mm

40mm

Inis Duo Double Control

70mm

90mm

Surface Mount Flush Mount

Group Command

For controlling up to 4 shutters a group command unit is required.

The units can be linked together to control any number of shutters from a single master switch, still giving the option of individual switching if required.

Remote Control

The third generation SeceuroSmart (RT) remote control system is fully compliant with all relevant European legislation.

Supplied as standard from May 2005, this state-of-the-art unit is bristling with a host of additional features and benefits including:

• A wireless safety edge, which is fully compliant to

BS EN 12453, replaces the safety photo-cell and reduces alignment problems and call-backs.

• Individual open, stop and close buttons mounted externally on the receiver for easy operation.

• A three colour LED on the unit indicates the doors current position and direction of travel.

• The remote control receiver monitors the motor's performance enabling it to detect an engaged manual locking device, if an object is jammed in the guide rails or curtain coil or if an individual is being lifted by the door. In these instances the door will automatically be stopped and the three colour LED on the unit will flash the appropriate system status signal.

• The unit can detect when a motor's thermal trip has been activated due to the motor overheating and will flash the appropriate system status signal using the three colour LED.

• If the safety edge is activated during use the door will automatically enter a hold to run mode enabling the door to still be operated whilst ensuring there is no compromise to the customer's safety.

70mm

Key Switch

A two way momentary key switch is available as an option for security controlled operation.

Switches

The standard control switches are shown here. The Inis Uno and Inis Duo for controlling single and double shutters are available surface mounted as standard with an option for flush mounting. Switches are supplied “hold to run” for safety, as standard.

NOTE:

It is the responsibility of the customer / contractor to provide fuse spur outlet supplies in close proximity to the drive side of the shutter.

SHUTTER BOX EXTENSIONS

slat type

SeceuroShield 6000

SeceuroVision 8000

SeceuroShield 7500

SeceuroVision 7500

30 or 50mm

Shutter Box

Shutter

max area before box extension reqd (m

2

)

19

18

17

21

When face fixed the shutter box will overhang the guide by 30mm

(SeceuroShield 6000 / SeceuroVision

8000) or 50mm (SeceuroShield 7500

/ SeceuroVision 7500).

When reveal fixed the gap is made up using the appropriate sized box section.

Hole drilled to inside for cable connection between switch and motor.

Guide

Electrical spur outlet box

(by others) on inside.

COMPLIANCE WITH EUROPEAN DIRECTIVES AND STANDARDS

SWS UK's products not only comply with all relevant UK &

European legislation but have also received 3rd party certification from a UKAS accredited test house. This provides the reassurance that our claims of compliance have been verified by a credible independent organisation.

To ensure compliance the Construction Products Directive SWS has undertaken the following work and implemented the following product changes:

• Ensure all externally fitted doors will withstand a minimum windload of Class 2 (Stormforce 10)

• Conduct cyclic durability test for all products to identify wear.

• Our standard remote control operation solution is now a fully compliant safety edge for all roller shutters rather than a photocell.

• Anti drop device on all doors / serveries above approximately

26kg.

• Anti drop spring on SeceuroShield 7700 and built-in electric shutters where applicable.

• Double springing on all spring loaded doorway shutters between approximately 26kg and 53kg.

• If an electric shutter is fitted on a doorway and it is the only point of exit, our low level override has now been adapted so it can also be used internally for escape.



4



Built-On Shutters - Electric Operation

t

‡

The maximum area for a given slat design is NOT a product of maximum width x maximum height. Please check your shutter size against the maximum area limit.

Concave

Face

Convex

Face

Sizing Data

‡

Box Profile (a) For Shutter Heights including box (mm)

165mm 180mm 205mm 250mm 300mm 350mm 400mm

Insurance Approved

Security Shutters

3800







8000



55/69% Vision

TM

3801

3800

7500


9000


1500

TM


3800

Min Width 900mm

Max Width 3000mm

Max Height 4000mm

Max Area 12sqm

Min Width 750mm

Max Width 3000mm

Max Height 5000mm

Max Area 12sqm

Min Width 750mm

Max Width 3000mm

Max Height 5000mm

Max Area 12sqm

Min Width 1000mm

Max Width 6000mm

Max Height 4700mm

Max Area 20sqm

Min Width 900mm

Max Width 6000mm

Max Height 5000mm

Max Area 20sqm

Min width 900mm

Max Width 5000mm

Max Height 4000mm

Max Area 16sqm

Min Width 750mm

Max Width 3400mm

Max Height 4000mm

Max Area 8sqm

Min Width 750mm

Max Width 4000mm

Max Height 5000mm

Max Area 12sqm

**

1000 - 1600 1601 - 1900 1901 - 2800 2801 - 4000

1000 - 1600 1601 - 1900 1901 - 2800 2801 - 5000

1000 - 1600 1601 - 1900 1901 - 2800 2801 - 5000

*

1000 - 2000

1000 - 1250

1000 - 1600 1601 - 2000 2001 - 2800 2801 - 4000

1000 - 1600 1601 - 1900 1901 - 2800 2801 - 5000

2001 - 2800

1251 - 2500

1000 - 1600 1601 - 2800 2801 - 4000

2801 - 3800

2501 - 3400

1000 - 1800 1801 - 3200 3201 - 5000

3801 - 4700

3401 - 4700

TM


6000

Min Width 900mm

Max Width 6000mm

Max Height 5000mm

Max Area 20sqm

1000 - 1800 1801 - 2800 2801 - 4200 4201 - 5000

TM


7500

Min Width 1000mm

Max Height 6000mm

Max Height 4700mm

Max Area 20sqm

**

*

1000 - 2000

1000 - 1250

2001 - 2800

1251 - 2500

2801 - 3800

2501 - 3400

3801 - 4700

3401 - 4700

*


**

TM

7700

Min Width 900mm

Max Width 5400mm

Max Height 4000mm

Max Area 16sqm

1000 - 2000 2001 - 2800 2801 - 4000

Figures in red denote reverse coil heights for a given box size. 7500 Slat Standard coil Shutters coil with the concave side facing the barrel. 7500 slats are also able to coil in reverse (convex side facing the barrel) allowing the preferred visible external face to be selected irrespective of shutter fixing position. Reverse coiling increases the coil size - see box size data for a given height.

Please note the maximum sizes quoted for SeceuroVision 7500 and SeceuroShield 7500 are applicable to the traditional design style shutter with galvanised steel channels and head box.

These products are also available as Continental design shutters with aluminium head box and guide rails. The maximum sizes for the Continental style are as follows:

Maximum width 6000mm, maximum height 3400mm and maximum area 15sqm t

Please note 350mm box will be supplied in three sections rather than two see page 3 for further details.

MANUAL OVERRIDE

MANUAL OVERRIDE FACILITY

Exit Points

If a manual override is required for use in the event of power failure this must be specified at the time of ordering. There is a choice of technical solutions for the handle mechanism which operates the override, principally dependent upon whether the shutter is installed internally or externally and whether the override is to operate from inside or outside the building. Override locks and the low level external override are available at a surcharge.

All specifications refer to a 205mm box or larger. When a shutter is installed over an exit which would be the only means of an escape in an emergency it is a legal requirement to install an override on the inside. The latest generation of low level external overrides can now be operated from both the inside and outside to satisfy this legal requirement.

USE OF MANUAL OVERRIDE SHUTTERS:

Clear instruction must be given to users on the manual override winding direction to raise the shutter. Winding the shutter downwards beyond the normal stop point will damage the shutter.

H

A

F

E

Not all exit options will be possible on certain shutters

Externally fitted shutter with external override

A removable 45˚ joint crank handle is inserted into the motor. The exit hole is filled with an

18mm cover cap or lockable override cover.

Only available on shutter box exit ‘F’ or 'E' for

205mm box or bigger.

45˚ crank

A lockable coverplate option





Guide Profiles S = Standard O = Option

HIGH

SECURITY

Bottom Slat

GUIDE PROFILES

H25 H30

S

O S O

O S O

S

S O O

S

S

205 box

S

250/

300/

350 box

O

250/

300/

350 box

O S O

S

205 box

S

250/

300/

350 box

O

250/

300/

350 box

S

Steel

Reinforced

AEG +

Reinforcing

Angle

AEG +

Reinforcing

Angle

L Section

UPH140 UPH240

AEG/DW

AEG/X +

Reinforcing

Angle

AEG

AEG +

Reinforcing

Angle

AEG/X +

Reinforcing

Angle

L Section

BOTTOM SLAT PROFILES

STEEL REINFORCED AEG/X + REINFORCING ANGLE

AEG + RUBBER SEAL AEG + REINFORCING ANGLE

AEG/DW

H40/S

UPH250

AEG/DW

L SECTION

Externally fitted shutter with internal override

A permanently installed internal handle can often be specified subject to final survey and dependent on the construction of the building specification. Specification and installation details are the same as for rod crank operation on page 9 figure ‘2’ or ‘3’.

Internally fitted shutter with internal override

A fixed eye can be supplied at shutter box exit ‘F’ with a removable hooked handle of

1100mm as standard - see section on

Crank Operation (page 9) for detail.

Alternatively a fixed 45˚ joint crank handle can be supplied at box exit ‘E’ or ‘F’

(similar to figure ‘1’ page 9).

Internally fitted shutter with external override

The low level external override (exit F) is operated by unlocking the override cover plate and inserting the winding handle.



6



Built-On Shutters - Spring Assisted

Box Profile (a) For Shutter Heights including box (mm) 2800 mm is our maximum recommended height for spring assisted shutters to ensure safe and appropriate operation.

‡


Concave

Face

Convex

Face

Sizing Data

‡



3800

3800



7500



8000




55/69% Vision

9000


1500

TM


3800

TM


6000

TM


7500

TM


7700

Min Width 755mm

Max Width 3000mm

Max Area 9sqm

Min Width 755mm

Max Width 3000mm

Max Area 9sqm

Min Width 900mm

Max Width 4000mm

Max Area 10sqm

Min Width 755mm

Max Width 4000mm

Max Area 8sqm

Min Width 755mm

Max Width 4600mm

Max Area 8sqm

Min Width 755mm

Max Width 3400mm

Max Area 6sqm

Min Width 755mm

Max Width 4000mm

Max Area 7sqm

Min Width 755mm

Max Width 4000mm

Max Area 8sqm

Min Width 900mm

Max Width 4000mm

Max Area 12sqm

Min Width 755mm

Max Width 4000mm

Max Area 12sqm

165mm 180mm 205mm

1000 - 1600 1601 - 1900 1901 - 2800

250mm

1000 - 1600 1601 - 1900 1901 - 2800

*

1000 - 2000

1000 - 1200

2001 - 2800

1201 - 2500 2501 - 2800

1000 - 1800 1810 - 2800

1000 - 1600 1610 - 2800

800 - 1600 1601 - 2000 2001 - 2800

1000 - 1600 1601 - 1900 1901 - 2800

1000 - 1800 1801 - 2800

300mm

t

350mm

* 1000 - 2000

1000 - 1200

2001 - 2800

1201 - 2500 2501 - 2800

1000 - 2000 2001 - 2800

Heights marked with a red dot are for boxes able to accommodate larger heights but are purposely restricted by our recommendation.

Figures in red denote reverse coil heights for a given box size. 7500 Slat Standard coil Shutters coil with the concave side facing the barrel. 7500 slats are also able to coil in reverse (convex side facing the barrel) allowing the preferred visible external face to be selected irrespective of shutter fixing position. Reverse coiling increases the coil size - see box size data for a given height.

Please note 350mm box will be supplied in three sections rather than two see page 3 for further details.

LOCKING

Bottom slat key lock

Spring loaded shutters include a transverse lock which is operable from both sides, fitted into the bottom slat as standard. The central key throws out locking bars which locate into the box section of the guide rail at each side.

The shutter must be held in the closed position against the springing to engage the locks. Handles are supplied to assist operation - one or two are supplied dependent upon shutter size. Non locking shoot bolts are available as an option.

Bullet locks

Bullet locks are available. The locks go through the the guide and slat.

Shown is an elevation from outside with the shutter closing down behind optional angle. Bullet locks are only available with H40S,

UPH 240 and UPH 250 guide profiles.





Guide Profiles S = Standard O = Option

HIGH

SECURITY

Bottom Slat

GUIDE PROFILES

H25 H30 H40/S

O S O

O S O

S

S O O

S

S

205 box

S

250/

300/

350 box

O

250/

300/

350 box

S O O

S

205 box

S

250/

300/

350 box

O

250/

300/

350 box

S

S

AEG +

Reinforcing

Angle

AEG +

Reinforcing

Angle

L Section

UPH140 UPH240

27

UPH 240

AEG/DW

AEG/X +

Reinforcing

Angle

AEG

AEG +

Reinforcing

Angle

AEG/X +

Reinforcing

Angle

L Section

AEG + RUBBER SEAL

75

BOTTOM SLAT PROFILES

STEEL REINFORCED AEG/X + REINFORCING ANGLE

AEG + REINFORCING ANGLE

AEG/DW

UPH250

AEG/DW

L SECTION

REMOVABLE GUIDES

For large spans and corners typically found on bars and counters


Removable Centre Rails

Appropriate on bar and servery applications with 2+ shutters where the opening needs to be clear. The top of each removable guide rail locates into a matching

70mm length which is permanently fixed to its end plate during manufacture (Fig.3). The bottom of each rail is secured using a chrome bolt which is supplied loose along with a recessed 40mm socket and dust cap (fig.1) or by using a white lockable bolt (fig.2). One bolt per pair of removable guide rails.

Shutters with removable guide rails and a curtain weight of 40kg or more will be supplied with steel end plates.

Fig.1

CHROME

Fig.2

WHITE

Minimum of 70mm

Fig.3

Please Note:

when a pair of removable centre rails are required they will be fastened together by SWS during manufacture and supplied with one loose bolt to be attached on site.


8



Built-On Shutters - Rod Crank Operation

See previous section for guide and bottom slat details

Box Profile For Shutter Heights including box (mm)

Guide Profiles

S = Standard O = Option

Bottom Slat 2800 mm is our maximum recommended height for rod crank shutters due to the length of time taken to wind up and down.



3800

3800




1500

TM


3800

‡


Concave

Face

Convex

Face

Sizing Data

‡

Min Width 500mm

Max Width 3000mm

Max Area 4.5sqm

Min Width 500mm

Max Width 3000mm

Max Area 4.5sqm

Min Width 500mm

Max Width 3400mm

Max Area 6.5sqm

Min Width 500mm

Max Width 4000mm

Max Area 3.5sqm

165mm 180mm 205mm

1000 - 1600 1601 - 1900 1901 - 2800

1000 - 1600 1601 - 1900 1901 - 2800

800 - 1600 1601 - 2000 2001 - 2800

1000 - 1600 1601 - 1900 1901 - 2800

250mm H25 H30 H40/S Standard

O S

O S

S O

O S

O

O

O

AEG

AEG

AEG

AEG

Heights marked with a red dot are for boxes able to accommodate larger heights but are restricted by the operating speed of the gearing to 2800mm.

HEAD BUILT ON REVEAL CRANK

OPERATION

HEAD BUILT ON FACE: THROUGH WALL

CRANK OPERATION

HEAD BUILT ON REVEAL: THROUGH

FRAME CRANK OPERATION

Fig. 1

Specify a 45˚ joint with

2 hole fixing plate

Box Exit F

Under hang

50mm

Crank handle fixing plate

Bottom of box set 25mm below top of opening

CRANK HANDLES

90˚ crank

1350mm cranked,

1550mm when straight

90˚ crank head

Fig. 2


4 hole fixing plate

Box Exit A

Hole drilled below lintel for rod


Hole drilled through frame for rod

45˚ crank

1350mm cranked,

1550mm when straight


45˚ crank head

Fig. 3


2 hole fixing plate

Box Exit H

1100mm hooked handle as standard





Built-On Shutters - Belt Operation

See previous section for guide and bottom slat details

‡


Sizing Data

‡

SWIVEL WINDER

Concave

Face

Convex

Face



3800



3800


1500

TM


3800

Min width 500mm

Max width 1900mm

Max height 1800mm

Max Area 2.3sqm

Min width 500mm

Max width 1900mm

Max height 1800mm

Max Area 2.3sqm

Min width 500mm

Max width 3400mm

Max height 2800mm

Max Area 3.3sqm

Min width 500mm

Max width 1900mm

Max height 1800mm

Max Area 2sqm

Box Profile For Shutter Heights including box (mm)

Guide Profiles

S = Standard O = Option

Bottom Slat

165mm 180mm

1000 - 1600 1601 - 1800

205mm H25 H30 H40/S Standard

O S O

AEG

1000 - 1600 1601 - 1800

1000 - 1600 1601 - 1800

O S O

AEG

1000 - 1600 1001 - 2000 2001 - 2800

S O

AEG

O S O

AEG

GEARED WINDER






TM


3800

3800

1500

3800

Min width 500mm

Max width 2800mm

Max height 2800mm

Max Area 3.8sqm

Min width 500mm

Max width 2800mm

Max height 2800mm

Max Area 3.8sqm

Min width 500mm

Max width 3400mm

Max height 2800mm

Max Area 5.5sqm

Min Width 500mm

Max Width 2800mm

Max Height 2800mm

Max Area 3sqm

1000 - 1600 1601 - 1900 1901 - 2800

1000 - 1600 1601 - 1900 1901 - 2800

800 - 1600 1601 - 2000 2010 - 2800

1000 - 1600 1601 - 1900 1901 - 2800

Heights marked with a red dot are for boxes able to accommodate larger heights but are restricted by shutter weight.

O

O

S

O

S

S

O

S

O

O

O

AEG

AEG

AEG

AEG

BELT OPERATION FACE FIX BELT OPERATION REVEAL FIX SWIVEL WINDER

GEARED WINDER



10



SWS UK is a leading manufacturer of physical security products and has developed the comprehensive Seceuro range of shutters, see-through shutters, retractable gates and removable bars to offer more effective protection for businesses and homes.

Established in 1985 and with a wealth of experience, SWS UK is based in modern, purpose-built premises located near Lancaster and employs more than 170 people.

A cornerstone of SWS’s reputation is its national network of specialist distributors. Working in partnership to promote, supply, install and support, distributors provide a trusted, experienced and local source for the SWS product range.

SWS UK is registered to ISO 9002 by the Loss Prevention

Certification Board and operates a programme of continuous improvement to its products. The company continues to invest in research and development with the consistent aim of producing physical security products which offer uncompromising protection designed to meet the demands of the modern lifestyle and workplace.

Commercial

Retail

Counter & Cabinet

Domestic

Your Specialist Distributor:

PROPERTY PROTECTION SYSTEMS

SWS SeceuroShield 6000, 7500, 7700, SeceuroVision 8000, 7500, 3800, 3800, 7500, 8000, SeceuroScreen 1500, 3801 security shutters, SeceuroVision 9000 roller grille Technical guide

Assistant Bot

SHUTTERS TECHNICAL GUIDE

3

BUILT-ON SECURITY SHUTTERS

TECHNICAL GUIDE

PROPERTY PROTECTION SYSTEMS

Built-On Security Shutters Technical Guide

CONTENTS

Range Over view

Typical Arrangements

Electric Operation Shutters

Spring Assisted Shutters

Page

1-2

3-4

5-6

7-8

Rod Crank & Belt Operated Shutters 9-10

INTRODUCTION

MAXIMUM/MINIMUM DIMENSIONS, WEIGHTS,

APPLICATIONS, FINISHES & OPERATION

At a glance

Approved

White/Brown Satin

/ Servery

/ Kiosk

Galvanised

Silver

Anodised

/ Cabinet

Manual Rod Geared Swivel

Option

Belt operation

**

Belt

assisted

**

HEAD DETAILS

Built-On Shutters - Typical Arrangements

GENERAL ARRANGEMENT

JAMB DETAILS

GENERAL DETAILS

SHUTTER BOX & 45˚ CANOPY

GUIDE FIXING

BOTTOM SLAT DETAIL

CONTROL SWITCHES

AUTOMATION & CONTROLS

MOTOR WIRING

SHUTTER BOX EXTENSIONS

30 or 50mm

Built-On Shutters - Electric Operation

MANUAL OVERRIDE

MANUAL OVERRIDE FACILITY

H

A

F

E

Externally fitted shutter with external override

GUIDE PROFILES

H25 H30

UPH140 UPH240

BOTTOM SLAT PROFILES

H40/S

UPH250

Externally fitted shutter with internal override

Internally fitted shutter with internal override

Internally fitted shutter with external override

Built-On Shutters - Spring Assisted

LOCKING

GUIDE PROFILES

H25 H30 H40/S

UPH140 UPH240

BOTTOM SLAT PROFILES

UPH250

REMOVABLE GUIDES

Built-On Shutters - Rod Crank Operation

Fig. 1

Specify a 45˚ joint with

2 hole fixing plate