Catalogue Sheet: CX7000 & CS7000 Series

Catalogue Sheet: CX7000 & CS7000 Series
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
CX7000 &
CS7000 SERIES
Bilingual Extruded Aluminum
Exit Sign
FEATURES
• Durable, extruded, one-piece
aluminum housing
• Long-life, energy-efficient ALINGAP
technology red LED light source
completely enclosed in acrylic module
• Single illumination module lights both
single and double face Exit Signs
• Highly energy efficient, consumes a
maximum of 5.5W in AC or DC mode
(standard model)
• Normal AC and emergency DC
operation – 120V to 347VAC and
6V to 24VDC input
• CSA certified, meets or exceeds
CSA 22.2 No. 141 requirements
Supply and install the Ready-Lite® bilingual CX7000 & CS7000 Series LED Exit Sign. The equipment shall
operate with universal AC input voltage of 120 to 347VAC at less than 2W and universal two-wire DC input
voltage from 6VDC to 24VDC at less than 3.5W for single and double face signs. The housing shall be
constructed of rugged extruded aluminum and have a maximum depth of 2-1/2”. The faceplate(s) shall be
constructed of extruded aluminum and come standard with knockout chevrons. The equipment shall have
two (2) canopies that shall fasten for installation in either ceiling- or wall-mount applications. The light source
shall be light emitting diodes (LED).
The LED lamps shall provide illumination in normal and emergency operation and shall be mounted inside
the exit housing. Red LED technology shall be ALINGAP An LED-sensitive diffuser shall be mounted behind
the legend to provide the 6” high by 3/4” stroke letters with even illumination.
The Exit Sign in a Self-powered configuration shall be equipped with a Nickel-Cadmium battery and shall stay
illuminated during emergency operation for at least 60 minutes upon AC failure.
The Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No. 141
The equipment shall be Ready-Lite® Model:
.
WIRE GUARDS
460.0059-RL
wall mount
460.0092-RL
ceiling mount
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC/ standard DC, red
120 to 347VAC
less than 3W
6 to 24VDC
less than 3.5W
AC/ special DC, red
120/277/347VAC
less than 5.5W
36 or 48 or 120VDC
less than 5.5W
Self-powered, red
120/347VAC
less than 6W
nickel-cadmium battery
Min. 60 to 120 minutes
36
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
DIMENSIONS
Dimensions are approximate and subject to change.
CX7000 &
CS7000 SERIES
Bilingual Extruded Aluminum
Exit Sign
2-1/2” [6.3 cm]
7-3/4” [19.7 cm]
29” [73.3 cm]
8-3/4” [22.3 cm]
7-3/4” [19.7 cm]
7-3/4” [19.7 cm]
4-3/4” [11.9 cm]
29” [73.3 cm]
ORDERING INFORMATION
LETTERING
CX= exit sortie 6” letters
CS= sortie exit 6” letters
FACES
7100= single face
7200= double face
COLOUR
WH= factory white
BA= brushed aluminum
TA= textured aluminum
BK= black
VOLTAGE
-UL= 120 to 347VAC, 6 to 24VDC
-L120-2W= 120VAC, 120VDC 2 wires
-LU36= 120/277/347VAC - 36VDC
-LU48= 120/277/347VAC - 48VDC
-LU120= 120/277/347VAC - 120VDC
-ISP= self-powered, 120/347VAC
OPTIONS
TP= tamper-proof screws*
VRTP= polycarbonate shield with tamper-proof
screws*
90= self-powered (90 mins.)
120= self-powered (120 mins.)
3C= 3 canopies
*990.0119-RL= T
amper-proof bit (sold separately)
EXAMPLE: CX7100WH-UL
37
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement