TOSHIBA

Q U I C K

R E F E R E N C E

G U I D E

B U S I N E S S

T E L E P H O N E

S O L U T I O N S

Strata DK8 & DK16

DIGITAL TELEPHONE

Account Code

Calls

Automatic

Busy Redial

Automatic

Callback

To enter a Forced

Account Code:

¶¶¶¶¶ Access an outside line by dialing a line access code or pressing a

Line or Pooled Line Grp button.

¶¶¶¶¶ Enter the Forced Account Code.

¶¶¶¶¶ Listen for dial tone.

¶¶¶¶¶ Dial a telephone number.

To enter a Voluntary

Account Code:

¶¶¶¶¶

Press the Account Code button

(or press the * button and dial

5 0 ) after seizing an outside line or while on a call.

¶¶¶¶¶

Enter the Account Code.

To activate Automatic

Busy Redial (optional feature):

¶¶¶¶¶ After dialing an outside telephone number, press the Auto Busy

Redial button, or press the

Cnf/Trn button and dial 4 4 .

¶¶¶¶¶

Your telephone will signal you when the called number becomes not busy.

To cancel Automatic

Busy Redial:

¶¶¶¶¶ Press the Auto Busy Redial button, or press the Intercom button and dial 4 4 .

To activate Automatic

Callback:

¶¶¶¶¶ After dialing a busy station or a station in the Do Not Disturb mode, press the Auto

Callback button or dial 4.

¶¶¶¶¶ Hang up. The system will call you back when the station becomes available.

¶¶¶¶¶ To cancel Auto Callback press

Intercom 4 3.

DIGITAL TELEPHONE

Call Forward

Call Park

To set Call Forward with a Call Forward button:

¶¶¶¶¶ Press a Call Forward button

( Call Frwd All Calls , Call

Frwd Busy , Call Frwd No

Answer , Call Frwd Busy/

NAns ).

¶¶¶¶¶ Enter the station number to which calls will forward.

¶¶¶¶¶ Press the Call Forward button again.

To set Call Forward with an access code:

¶¶¶¶¶ Press the Intercom button and dial a Call Forward access code

( 6 0 1 for Call Forward-All

Calls, 6 0 2 for Call Forward-

Busy, 6 0 3 for Call

Forward-No Answer, 6 0 4 for

Call Forward-Busy/No Answer).

¶¶¶¶¶ Enter the number of the station to which calls will forward.

¶¶¶¶¶ Press the Spkr button.

To cancel Call Forward:

¶¶¶¶¶ Press the same Call Forward button that you used to set Call

Forward; or press the

Intercom button, dial 6 0 1 , then press the Spkr button.

To Park a call:

¶¶¶¶¶

While on a call, press the Cnf/

Trn button and dial 4 1 .

To retrieve the Parked call:

¶¶¶¶¶ Press the Intercom button and dial 4 2 .

To Pick Up a call:

¶¶¶¶¶

Press the Directed Pickup button or dial 5 .

¶¶¶¶¶ To pick up a call that is ringing or held at a station, dial the station number; for an intercom page or

DIGITAL TELEPHONE

Call Pickup

Call Transfer

With Camp-on

Conference

Calls

Do Not Disturb

ringing door phone, dial 3 0 ; for an external page, dial 3 5 ; for a

CO line on hold; dial 7 0 1 ~

7 0 8 , 8 1 ~ 8 8 , (depending on system's maximum number of lines); for any ringing CO line, dial 9 .

To Transfer a call:

¶¶¶¶¶ While on a call, press the Cnf/

Trn button and dial a station number.

¶¶¶¶¶ If the station is idle: Wait for the station to answer, make a voice announcement and hang up.

¶¶¶¶¶ If the station is busy: Hang up.

To make a Conference

Call:

¶¶¶¶¶

While on a call, press the Cnf/

Trn button.

¶¶¶¶¶ To add an outside line to the call, access an outside line and dial a telephone number; to add a station to the call, dial a station number.

¶¶¶¶¶ Press the Cnf/Trn button after the called party answers. All parties are conferenced together.

¶¶¶¶¶ To allow the outside parties to continue talking to each other, press the Cnf/Trn button again, then hang up.

¶¶¶¶¶

Monitor the two lines occasionally and disconnect if idle.

To activate/deactivate

Do Not Disturb:

¶¶¶¶¶ To activate, press the Do Not

Disturb button so that the LED lights; to deactivate, press the button again so that the LED turns off.

To place a call on

Exclusive Hold:

¶¶¶¶¶ Press the Hold button twice.

¶¶¶¶¶ No one can accidentally pick up your call.

DIGITAL TELEPHONE

Exclusive Hold

Handsfree

Answerback

Handsfree

Monitoring

Making Calls

To receive a Handsfree

Answerback call:

¶¶¶¶¶ You will hear a single warning tone followed by the caller's voice.

¶¶¶¶¶ Without lifting the handset, speak toward the telephone at a normal voice level to answer the call.

To use Handsfree

Monitoring:

¶¶¶¶¶ While holding down the Spkr button during a call, place the handset on-hook.

¶¶¶¶¶

Release the Spkr button.

¶¶¶¶¶

Lift the handset to resume the conversation.

To make an outside call:

¶¶¶¶¶ Press a Line or Pooled Line

Grp button; or, press the

Intercom button and dial a line access code ( 7 0 1 ~ 7 0

8 , 8 1 ~ 8 8 (depending on system's maximum number of lines).

¶¶¶¶¶ Dial a telephone number, and lift the handset when the called party answers.

To make a call to another station:

¶¶¶¶¶ Lift the handset and press the

Intercom button.

¶¶¶¶¶

Dial a station number.

¶¶¶¶¶ Make a voice announcement after you hear the single ring tone, or if ringing, wait for the called station to answer.

To make a Busy

Override or Executive

Override call:

¶¶¶¶¶

To make a Busy Override call,

DIGITAL TELEPHONE

Override

Paging

Repeat Last

Number Dialed

Saved Number

Redial

Soft Keys

dial 2 after dialing a busy station.

¶¶¶¶¶

To make an Executive Override

(barge-in) call, dial 3 after reaching a busy station.

To make a Page announcement:

¶¶¶¶¶ Press the Intercom button.

¶¶¶¶¶

To page all stations in the All Call

Page group, dial 3 0 ; station groups, dial 3 1 ~ 3 4 ; the All

Call Page group with external page zones optionally included, dial 3 9 ; external page zones, dial 3 5 ~ 3 8 .

To redial the last number dialed:

¶¶¶¶¶ Acess an outside line.

¶¶¶¶¶

Press the Redial button.

To "Save" a number to redial later:

¶¶¶¶¶ Any time after dialing a telephone number and before disconnecting the call, press the

Save Last Number button.

To redial a "Saved" number:

¶¶¶¶¶

Access an outside line, then press the Save Last Number button.

To turn Soft Keys on:

¶¶¶¶¶ Press Mode 71 when your telephone is idle.

To turn Soft Keys off:

¶¶¶¶¶ Press Mode 70 when your telephone is idle.

To access a feature with Soft Keys:

In this example of conferencing via the soft keys, grey indicates which

DIGITAL TELEPHONE

soft key button would be pressed to advance to the following step.

1. While talking on a CO line, the

TRNS (TRANSFER), CONF

(CONFERENCE), and PGE

(PAGE) soft keys appear:

2. After pressing the button under

CONF (CONFERENCE) soft key, the following display

T A L K O N L I N E 2

T R N S C O N F P G E

Mode Page Scroll appears. The STA. (STATION) soft key would be pressed to conference to another station.

3. Dial the station number of the

L I N E O R S T A T I O N ?

L I N E S T A . R T R N

Mode Page Scroll party that you wish to add to the conference call.

D I A L S T A T I O N N O .

R T R N

Mode Page Scroll

DIGITAL TELEPHONE

Soft Keys

(continued)

4. Once the called party answers, the LCD appears as follows.

Your station is connected to the called station 12 and the outside call remains on hold.

The JOIN soft key would be pressed to join all parties in a conference.

T A L K W I T H S T 1 2

T R N S J O I N R T R N

Mode Page Scroll

Speed Dial

To store a Speed Dial number:

¶¶¶¶¶ Press the Redial button, then the Speed Dial ( * ) button.

¶¶¶¶¶ Press the SD button you want to store the telephone number on, or dial a Speed Dial access code ( 1 0 ~ 4 9 for Station

Speed Dial; 6 0 ~ 9 9 for

System Speed Dial-station 10 only) where you want to store the number.

¶¶¶¶¶ Enter the telephone number, then press the Redial button.

To make a call with

Speed Dial:

¶¶¶¶¶ Access an outside line.

¶¶¶¶¶ Press an SD button, or press the

Speed Dial ( * ) button and dial a Speed Dial access code

( 1 0 ~ 4 9 for Station Speed

Dial, 6 0 ~ 9 9 for System

Speed Dial).

TOSHIBA

Toshiba America Information Systems, Inc.

Telecommunication Systems Division

9740 Irvine Boulevard, Irvine, CA 92718

(714) 583-3700

DIGITAL TELEPHONE

DK8-QR-DKTEL-R1