Matchless G3L RIGID FRAME (TOURING), G3LS SPRING FRAME (TOURING), G3LC RIGID FRAME (COMPETITION), G3LCS SPRING FRAME (COMPETITION), G80 RIGID FRAME (TOURING), G80S SPRING FRAME (TOURING), G80C RIGID FRAME (COMPETITION) motorcycle Maintenance manual

Below you will find brief information for G3L RIGID FRAME (TOURING), G3LS SPRING FRAME (TOURING), G3LC RIGID FRAME (COMPETITION), G3LCS SPRING FRAME (COMPETITION), G80 RIGID FRAME (TOURING), G80S SPRING FRAME (TOURING), G80C RIGID FRAME (COMPETITION), G80CS SPRING FRAME (COMPETITION). This manual provides non-technical instructions for carrying out all the maintenance operations likely to be called for in normal service. It includes sections on driving, lubrication, and periodic maintenance schedules. This manual is essential for ensuring the proper care and maintenance of your motorcycle.

PDF Download
Document
Matchless 1955 350 & 500cc Motorcycles Maintenance Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Detailed maintenance instructions
  • Driving tips and information
  • Lubrication guidelines
  • Periodic maintenance schedules
  • Comprehensive coverage of all models

Frequently asked questions

You should check the oil level daily.

The recommended engine oils are Mobiloil A or D, Castrol XL or Grand Prix, Energol 30 or 50, Essolube 30 or 50, and Shell Motor Oil X-100.

Ensure there is sufficient fuel and oil. Close the air control lever, open the throttle slightly, and depress the plunger on the carburetter float chamber. Raise the valve lifter lever, turn the engine over a few times, then depress the kick-starter until compression is felt. Raise the valve lifter lever again, ease the engine over compression, and give the kick-starter a long swing with the valve closed.

Limit the throttle opening to about one-third during the first 1,000 miles and gradually increase it after 2,000 miles.
Preparing document for printing…
0%